[SOLVED] Won't charge after port burned - Galaxy S6 Edge Q&A, Help & Troubleshooting

Ok I recently observed how my charger port burned during the nightly charging with fast charging. So I bought myself a new Dock connecter as it was named on Amazon. But still it wont charge. And somehow my Audio Jack wont work neither. So I thought myself i maybe bought a Brocken Dock connecter. So I ordered another one and it finally worked.
I also read an article about the s6 Edge that nobody should use the fast charging Option because of to much heat. So if you guys facing similar problems maybe another Dock connecter would help you with that.
And somehow my Edge wont evolve to much heat after my replacement. Kinda really cool during charging or fast charging.
Hope it will help somebody.

Related

Burn out chargers

My ss galaxy tab 7.7 is just abount 3 mos old and I'm very happy with it. My only concern is I have already busted 3 chargers. Is it the low quality of the chargers or is there something wrong with my Tab. Thanks
I just got mine few days ago and the charger gets very hot, even smells like plastic. But it was the same with my old P1000, they get hot, they smell like burning but keeps working Maybe the voltage at you home (wall plug socket) is not consistent?
strange thing about stock charger
I bought an cheep USB extention for my 6800 stock charger.
Now it does notget hot at all,
Also I have a 4 OUTLET switching charger thatworks well with the tab.
I picked it up at a place called xscargo.
Alternet chargers
I have also found that chargers that are for chargeing usb batterys are also hi-output
And very good for chargeing tabs.
I have tryed the ones for iphone battery packs and thay are very good for the 6800.
I use my stock charger on a surge protected power strip. It does not get unusually hot or smell like plastic. Maybe I have luck or it is the surge protection.

HTC One X iBolt Charging Car Dock (fits w/ case)

i was shopping for a oem Car dock that would work with our phones but also fit any case i wanted to put in the dock so heres the solution im ordering mine this week
http://www.amazon.com/iBolt-Vehicle-Car-Mount-Dock/dp/B008B0WNA6
Did you get it? How did it work out?
Sent from my HTC One X+ using Tapatalk 2
I've seen this one on amazon, Kidigi usually makes good quality stuff and - as it looks - comes with the insert as well so it could be used w and w/o case
http://www.amazon.com/Car-Charger-M...2&keywords=kidigi+charging+car+dock+htc+one+x
...comparison with the price of the iBolt ...looks like the same device to me.
I've had the iBolt car dock for a few days now, and it's working fine. It's a little clunky compared to my old Atrix car dock. I don't have a case on my phone, and the clamp on the top seems to sit on top more than grab it, but the phone is snug in there.
J Cubed said:
I've had the iBolt car dock for a few days now, and it's working fine. It's a little clunky compared to my old Atrix car dock. I don't have a case on my phone, and the clamp on the top seems to sit on top more than grab it, but the phone is snug in there.
Click to expand...
Click to collapse
Have you had any charging issues with yours?
When it goes into car mode and navigation is on, it barely charges if at all.
I spoke with iBolt and they are sending me a new one. Hopefully this resolves the issue.
I am still curious if anyone else is having this issue.
TeK9samurai said:
Have you had any charging issues with yours?
When it goes into car mode and navigation is on, it barely charges if at all.
I spoke with iBolt and they are sending me a new one. Hopefully this resolves the issue.
I am still curious if anyone else is having this issue.
Click to expand...
Click to collapse
The issue isn't the charger but the USB cable not being shorted to put phone into AC charging. Pins 4&5 need to be shorted to allow this to happen. I ordered two of these http://www.amazon.com/gp/product/B007F1DV76/ref=oh_details_o03_s00_i00
to go along with this http://www.amazon.com/gp/product/B008B2EFA0/ref=oh_details_o05_s00_i00
and has allowed me to use the HOX+ for hours of navigation and still charge the phone.
For car dock I use this: http://www.slipgripcarmounts.com/SlipGrip-Vent-Holder-For-HTC-ONE-X-S720E-Using-Seidio-Surface-Case_p_130568.html
I agree that the ibolt is a little clunky but i love it. Its really sturdy. It stays in the position you locked it down at. It's easy to dock the phone with 1 hand. I havent noticed any charging issues but i'll keep an eye on that now that you mentioned it.
interesting
and to think i was going to try and mod my Atrix toys to see if i could make them work.. .this looks way easier, wonder why they dont include the proper cable in the first place or if there are any other docks similar
techcontrol said:
The issue isn't the charger but the USB cable not being shorted to put phone into AC charging. Pins 4&5 need to be shorted to allow this to happen. I ordered two of these http://www.amazon.com/gp/product/B007F1DV76/ref=oh_details_o03_s00_i00
to go along with this http://www.amazon.com/gp/product/B008B2EFA0/ref=oh_details_o05_s00_i00
and has allowed me to use the HOX+ for hours of navigation and still charge the phone.
For car dock I use this: http://www.slipgripcarmounts.com/SlipGrip-Vent-Holder-For-HTC-ONE-X-S720E-Using-Seidio-Surface-Case_p_130568.html
Click to expand...
Click to collapse
Hello,
Well it's been quite some time but I didn't wanna open a new thread for this.
I'm using the iBolt dock for my HOX for quite some time and as told above it charges really really slow.
You might say it is caused by the cable, makes sense, but the charger I use to connect the iBolt is the geniune HTC car charger, which does charge the phone pretty fast.
Also, I exit car mode when I don't need it and turn the screen off in order to charge more, but it randomly and frequently turns the phone on. Sometimes just the Android homescreen but sometimes it re-launches the car app too. I was planning to call iBolt for this but I do not have much hope for getting detailed information about the output (actually the USB pin design) since there is no information about this on the web sites.
Can anyone confirm that it supports fast (normal) charging? It becomes useless beacuse of this issue.
You can easily check for yourself. While the phone is docked in-car, do the following: Settings>Power>verify that phone reports "Charging, (AC). If phone does not say this then you are in-fact charging at 500mA. The i-dock/HTC Charger must be capable of providing enough current to charge at 1A and phone must state it's in AC charging. If this is not the case, your phone will discharge while being used in-car.
I had the same issue of non-charging when I first got my phone in December. My research led me to the solution I previously posted. I do not use car-mode since the only app I use while driving is Waze. I hope this helps.
techcontrol said:
You can easily check for yourself. While the phone is docked in-car, do the following: Settings>Power>verify that phone reports "Charging, (AC). If phone does not say this then you are in-fact charging at 500mA. The i-dock/HTC Charger must be capable of providing enough current to charge at 1A and phone must state it's in AC charging. If this is not the case, your phone will discharge while being used in-car.
I had the same issue of non-charging when I first got my phone in December. My research led me to the solution I previously posted. I do not use car-mode since the only app I use while driving is Waze. I hope this helps.
Click to expand...
Click to collapse
Late thanks =)
After writing that message it came to me too and checked it, though it was saying that it is AC charging but I can swear to anything, whether car mode or screen is on, or not, it is not charged in 1000mA mode.. When I directly charged it with the genuine charger, it was fine.
So bought a 2amp car charger, and used its cable, and it works fine now.
May be, the genuine HTC charger CABLE and the iBolt are not quite friendly with each other. I remember Nokia's not launching PC Suite when it was not a genuine Nokia cable, may be a trick like that. iBolt does not like genuine cables or genuine cable does not like oem "sockets"

[Q] few questions about the magnetic charger

for those who have it and used it for long time..
1) is it charging faster/slower/same than regularly charging? (with the same charger of course)
2) is it actually comfortable? after trying it, do you actually use it daily and enjoy or its a gimmick only and you went back to the regular cable?
3) is it causing any damages? bugs? weird stuffs?
I'm Z owner (it doesn't compatible with magnets) and I'm considering to upgrade to z2/3/3c with mainly reason of the magnetic charging..
Some experience sharing would really help me out here.. YouTube is only for unboxing and showing it but no real tips from experienced users..
Thanks.
Been using magnetic chargers for bout half a year. So far:
1) The charging time is pretty much the same. I've been using the cheap chinese ones and haven't noticed a significant increase in the time it takes.
2) If you're willing to buy an expensive cable, I suppose the magnet would be stronger, but in my one dollar case it disconnects pretty easily. So it's not really comfortable when you have to keep the phone on a flat surface while charging. But people use magnetic cables to prevent the wear and tear of the flaps, and so do I.
3) No bugs, it's just a charger. The only thing that can go wrong is having your battery fried if you plug the cable incorrectly
1) same speed which actually depends more on used charger than the cable type
2) for charging I use only magnetic cable or cradle. In fact I used USB cable for maybe 2 days only and will never return back
3) lockscreen rotates according to the gravity sensor, otherwise no difference or issue
It's worth the investment. Really helps to protect the flaps and save time opening them
Sent from my D6503 using XDA Free mobile app
Thank you all!
Just make sure you never attach the cable inverted, otherwise it will fry not only the battery, but the whole motherboard. and also, make sure that nobody tries to charge it but you, as most people are careless and might attach it the wrong way. I have heard some dreadful stories about inverting the magnetic cable, this is a major design flaw from Sony, but again, all of those cables are fake and there is no genuine one from Sony, but only the dock, I don't know whether the phone can be put the wrong way in the dock as well. I have bought one for 9$ and working great, except the magnet isn't strong enough and it gets detached very easily. Good luck
Make sure u bought a high quality/expensive magnetic charger or u will regret, just like me. Ive using the local/cheap magnetic charger, and im really pissed off, the led charging keep blinking even if an ant pass through. This is what im using now, and i recommended for u too. http://www.amazon.com/Magnector-Improved-Performance-Magnetic-Charging/dp/B00Q3GK3YI
karim-ps said:
...........this is a major design flaw from Sony, but again, all of those cables are fake and there is no genuine one from Sony, but only the dock, I don't know whether the phone can be put the wrong way in the dock as well.
Click to expand...
Click to collapse
actually it's not!
If you take a really close look you see that one of the pin's has a bigger plastic encasing. So it "shouldn't" be possible to connect the magnetic charger the wrong way.
And about the Dock... who would try to put the phone into the dock with the display facing the wall? xD well okay... yeah... if it's dark and you're drunk... i can totally see me doing this....
BTT: i can reccomend this Magnector cables! i have one myself, after i bough 3 in China this is the first one working correctly, aka charging fast enough.
Haldi4803 said:
actually it's not!
If you take a really close look you see that one of the pin's has a bigger plastic encasing. So it "shouldn't" be possible to connect the magnetic charger the wrong way.
And about the Dock... who would try to put the phone into the dock with the display facing the wall? xD well okay... yeah... if it's dark and you're drunk... i can totally see me doing this....
Click to expand...
Click to collapse
Just google for Z ultra magnetic charger options and you will see how many motherboard got fried from inverted mag charger. I know that there are to pols one is a bit larger but still, the connector can enter the wrong way, at least some connector.
Hi, i bought the dk36 dock with magnetic charger on amazon, cheaper than the official sony shop, it charges in the same time. A friend told me that the magnetic cables are very bad, they are very cheap but can make the phone burn because of the low quality as you say.
manolilloi said:
Hi, i bought the dk36 dock with magnetic charger on amazon, cheaper than the official sony shop, it charges in the same time. A friend told me that the magnetic cables are very bad, they are very cheap but can make the phone burn because of the low quality as you say.
Click to expand...
Click to collapse
Your friend doesn't know anything about electronics. Do you even know how the magnetic charging works? The only bad thing that can happen from chinese docks is slow charging. I have a DIY magnetic cable and it works great in terms of speed(it had a really weak magnet and a dock came with my Z2, so I don't use it anymore). Reverse polarity is unlikely to happen-most mag connectors are keyed. But anyways, be careful with the orientation.

Stopped charging besides Qi charge.

Hello!
I recently bought a S6 Edge for my little brother (1 week ago).
As he returned from school in the weekend (Boardschool) I surprised him with a fully charges S6 Edge (Left it charging for a day).
As monday he went back to school (They can only use the phones in their rooms) he left it charging monday night)
The phone was not charged teusday morning. (using the original charger and OTG cable).
He tried with his laptop, another power plug and nothing worked.
This weekend now I tried with a Qi charger and it started charing.
After a full night Qi charing his phone is at 100%
The phone doesnt get detected by my computer either. Seems like the microUSB port is broken, but he barely had the phone... And you know how you handle a brand new expensive phone, right?
I checked for dust, nothing changed.
Im not in the mood to send the phone back right now, so I wonder if anyone encountered this problem and maybe fixed it.
Thanks,
PV-
same thing just happened to me..did you find a fix by any chance?
same as you body, but i dident want to go in repair shop because i dont want to open my phone so i decided to buy a wireless charger and is working good until now with a little problem that is a slow way to charge a phone In a mean time if you dont have a wireless charger try to turn off your phone and plugged in charger repeat this until it works because my S6 sometimes it works sometimes not (alternative buy a battery case)... hope i was helpful for you, have great day.

[Q] battery charging issue?

Hello,
I'm running Temasek's unofficial CM13 (Darkened_Sky) ROM on my SIII. I thought my battery was dying somehow, so I bought a new battery, but still it's taking ages to charge, and does not seem to keep the charge better.
What could be the issue? Should I just forget the phone and get a new one?
Thanks,
Vince
any suggestion?
so it seems a charging equipment issue or phone's charging port malfunction. try different chargers 1st.
well, I'm using the samsung charger or charging with the USB cable connected to PC, I don't seem to see any difference...
ok, the charge seems to hold better, but the charging time is still very long (I think), any suggestion?

Categories

Resources