Is there anyone in San Diego that could install a fast, smooth and reliable version of Android on my HD2? If so, please let me know when you can do it and for how much $.
I spend my time between coastal North County and Chula Vista.
Thanks
Steve
It's so simple. Why on Earth would you pay someone to do it?
You download the one that looks best to you from HD2 Android Development, unzip it, and put the Android folder onto your sd card.
Not inside any folders on your card, just on the card.
Then in Windows Mobile, you go to your file explorer, go into the Android folder on your sd card, tap CLRCAD (nothing will happen, thats ok just tap it each time you start Android) and then tap Haret.
It really is as simple as putting a folder onto your sd card.
Just do it yourself. If you manage to screw it up, it won't mess up your phone and somebody on this forum will take pity on you and show you where you messed up
don't forget to flash a newer radio!
kypeth said:
don't forget to flash a newer radio!
Click to expand...
Click to collapse
good point, forgot about radio.
as long as it's a XX.XX.50.XXX radio, its good
I started this thread because I had just discovered that I can't do the install on my mac with an emulator. I really need to do it myself just so I know how to do it so I don't have to hassle finding someone to do updates. Sooooo, I'm doing a clean install on an old Windows machine just to get this done.
Are there simple non-developer instructions anywhere on how to do this? I've had two people tell me how simple this is but the instructions on this forum don't seem that simple with terms like "flash, etc. What does the term "flash" mean?
magentawave said:
I started this thread because I had just discovered that I can't do the install on my mac with an emulator. I really need to do it myself just so I know how to do it so I don't have to hassle finding someone to do updates. Sooooo, I'm doing a clean install on an old Windows machine just to get this done.
Are there simple non-developer instructions anywhere on how to do this? I've had two people tell me how simple this is but the instructions on this forum don't seem that simple with terms like "flash, etc. What does the term "flash" mean?
Click to expand...
Click to collapse
It's called that because of the type of memory. Anyway, it basically means install. "Flashing" a new radio means you're installing a different version while overwriting the existing one.
HOW TO FLASH:
Use "CustomRUU.exe" to flash the file (.nbh file extension). Phone must be connected and have >50% battery. If the CustomRUU.exe isn't included, download here:
http://forum.xda-developers.com/attachment.php?attachmentid=239860&d=1256298258
Step 1 - HSPL3 must be installed.
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
The .zip attached to this must be extracted and installed. Simple enough, no?
Step 2 - Flash a new Radio ROM.
I recommend the newest one (2.15.50.14)
http://forum.xda-developers.com/showthread.php?t=611787
Step 3 (OPTIONAL) - New Windows Mobile ROM
I put optional because Android will run without a different one, it just might not be as well. Download the "RELOADED 3" one in red. I use this one. Flash the same way.
http://forum.xda-developers.com/showthread.php?t=776971
Step 4 - Download Android flavor of your choice and copy it onto your SD card. I recommend http://forum.xda-developers.com/showthread.php?t=870518
Step 5 - Go into WM, navigate to the Android folder on the root of your SD, and click CLDCAD.exe (nothing will happen, this is normal) then click haret.exe
Step 6 - Celebrate.
If you need any help, feel free to message me.
No can do with any Virtual Machine on Macintosh?
Just use the newest official.They come with a newer radio.
If you cant flash with your mac extract the file and copy the nbh file as leoimg.nbh in the root of your SD.
Start the phone with vol down and let it flash.
sthEn said:
No can do with any Virtual Machine on Macintosh?
Click to expand...
Click to collapse
Instead of a virtual machine (is it Parallels?) why not use BootCamp, then you have a full Windows os on your mac - and you can flash.
I'll see if I can borrow a mac again and test flashing via Parallels.
I would love to help you for free - you just have to spend a plane ticket from Denmark (with lots of snow and freezing temperature) ;-)
fred_up said:
Instead of a virtual machine (is it Parallels?) why not use BootCamp, then you have a full Windows os on your mac - and you can flash.
I'll see if I can borrow a mac again and test flashing via Parallels.
Click to expand...
Click to collapse
I am a mac user and i used both Parallels and boot camp and i did it successfully without any issues.
I am a mac user and i used both Parallels and boot camp and i did it successfully without any issues.
Click to expand...
Click to collapse
I'm utterly stunned... I thought a Mac could do everything... and do it better than Windows, faster than Windows, more stylishly than Windows and made the user more intelligent, more likable and better looking at the same time...
Oh well...
I'm in South Orange County...If you don't get it figured out, and you are willing to come to me, I will do it for free. Just let me know.
mm0
Airborne Aircrew said:
I'm utterly stunned... I thought a Mac could do everything... and do it better than Windows, faster than Windows, more stylishly than Windows and made the user more intelligent, more likable and better looking at the same time...
Oh well...
Click to expand...
Click to collapse
On the few times I have run Windows on a Mac (via Parallels and Bootcamp), it runs really well. It just goes to show that the main problems with Windows is that of the sloppy drivers for the hardware that the hardware manufacturors provide. Since Apple only have a couple of computers, therefore they can afford to take time to develop device drivers for Windows.
Just to clarify please and sorry to be asking lame questions...
1) Is this true? "The best most reliable Froyo ROM for the HD2 is the 2.2.1 Custom Nexus HD2-FRG83D V1.8 Froyo ROM. Very stable and everything works perfectly." Is that accurate?
2) Are you saying that I can do the entire install of everything on my Mac with an emulator (VMWare Fusion) as long as I do it the way you describe?
3) Are you saying that I should change the name of the nbh file to leoimg.nbh and then drop it into my SD card?
4) My HD2 came with Android on it but it runs slow and clunky and won't make calls, etc. Its basically unusable so I'm assuming it wasn't installed correctly. There is nothing on the SD card that I care about. Should I format the SD card before starting the new build? And is there anything on the Windows side that I should delete first before starting too?
Thanks again.
Steve
Ultimaex said:
Just use the newest official.They come with a newer radio.
If you cant flash with your mac extract the file and copy the nbh file as leoimg.nbh in the root of your SD.
Start the phone with vol down and let it flash.
Click to expand...
Click to collapse
I would be willing to pay somebody for simple step by step clear non-nerdy instructions on how to install this stuff (Android, reformat SD card to FAT32, radio, etc., etc.) Seriously! You know, Step 1: Do this ya moron. Step 2: Now put this file named this in here idiot. Step 3: Now do this retard, etc.
Here are some more questions please...
1) What is the difference between a "sense" build and a "non-sense" build? Advantages, disadvantages?
2) When I plug the usb from my hd2 into my computer I don't see or recognize what is the SD card folder and I don't know where to install what I'm supposed to install. Here is what I see...
Removable Disk (E) > Application Data folder > HTC folder > databases folder > DocExp folder (with all this stuff in the DocExp folder: flintlock, postlist, postlist.baseB, record.baseA, termlist, termlist.baseB, iamflint, post.baseA, record, record.baseB, termlist.baseA)
...and next to the Application Data folder above there is also this: EncFiltLog.menc
and this is also in the HTC folder too...
ImageCache folder > DocExp folder (which is empty)
Thanks again.
Steve
magentawave said:
I would be willing to pay somebody for simple step by step clear non-nerdy instructions on how to install this stuff (Android, reformat SD card to FAT32, radio, etc., etc.) Seriously! You know, Step 1: Do this ya moron. Step 2: Now put this file named this in here idiot. Step 3: Now do this retard, etc.
Here are some more questions please...
1) What is the difference between a "sense" build and a "non-sense" build? Advantages, disadvantages?
2) When I plug the usb from my hd2 into my computer I don't see or recognize what is the SD card folder and I don't know where to install what I'm supposed to install. Here is what I see...Removable Disk (E) > Application Data folder > HTC folder > databases folder > DocExp folder (with all this stuff in the DocExp folder: flintlock, postlist, postlist.baseB, record.baseA, termlist, termlist.baseB, iamflint, post.baseA, record, record.baseB, termlist.baseA)
...and next to the Application Data folder above there is also this: EncFiltLog.menc
and this is also in the HTC folder too...
ImageCache folder > DocExp folder (which is empty)Thanks again.
Steve
Click to expand...
Click to collapse
OK, when you first start up your phone, and there are little red numbers and stuff down it the corner, look next to the letter 'R'
If it is X.XX.50.XXXX, then you're OK and don't need to change radio's and the process is very simple. (The X's can be any number, doesn't matter, as long as the 3rd set as shown are 50, not 51 or anything else.) So if it's 50, don't worry about the signed_ruu.nbh file or leoimg.nbh or flashing a radio. If it's not 50, you will need to change radio.
Next, when you plug the phone to your computer, the place where you find the 'Application Data' folder and the file 'EncFiltLog.menc', that is the root of your sd card. That is where the Android folder that you download and unzip will go.
So you will download the nicest looking build that you like the best, it will be in a .zip or .7z archive. You open the archive and take the 'Android' folder out and place it on your desktop. Then you drag it and drop it right next to your 'Application Data' folder. Don't put it in the 'Application Data' folder, just in the same place where that folder is at.
Removeable Disk E is your memory card, the root of the card simply means just on the card, not within any folders on the card, just on the card. That's where the Android folder goes, on the root of the card.
As far as Sense vs. No-Sense builds, Sense is maybe a little more user(noob) friendly, but it uses more of your phone's resources, so sometimes tends to lag (slow down, run slow) more than a no-sense build. For you, I would say try a Sense build first. Once you have installed one build, you will become more confident and really see how easy it is. Then you can experiment with different builds and see what is best for you.
After you have put the Android folder on the root of your sd card, alls there is left to do is to use the File Explorer on your phone to find the Android folder on your sd card, go inside that folder, first tap CLRCAD (it won't appear to do anything, but it actually enables sound in Android) (if your phone says the application is not from a trusted source,and asks do you want to continue, just click 'yes') and then tap Haret, a box will appear with a progress bar, and then Android will boot up (start).
The first time you run an Android build, it can take up to 15 minutes to start up. This is normal, just give it a while.
Then when it starts up, enter all the data it asks for (GMail, email addresses, etc. nothin major) and then when you have finished with that, and you end up at the phone's Android homescreen, hold the 'End Call' button, and choose 'reboot' and if there's no reboot option, just choose 'shut down' and then restart Android the same way as before. For some reason, rebooting after the first time like that actually helps Android to run more stable over the long term.
If you follow these instructions exactly as I have written them, you cannot fail. Now go, and enjoy Android
No need to pay me, just remember the 'thanks' button
On the few times I have run Windows on a Mac (via Parallels and Bootcamp), it runs really well. It just goes to show that the main problems with Windows is that of the sloppy drivers for the hardware that the hardware manufacturors provide. Since Apple only have a couple of computers, therefore they can afford to take time to develop device drivers for Windows.
Click to expand...
Click to collapse
I think you prove my point quite well... Macs are pretty much a single entity unto themselves. What Apple says, goes. Nothing else is acceptable. If you are prepared to be so limited then go ahead and stay with Apple products - they are for those who think they have imagination but are actually fooled into a "groupthink".
Huggs! Thank you very much for taking the time to explain that to me.
I installed Android and added my info (email address, etc.) and then restarted it like you said to do. Of course Windows loads first and when I tap the Android icon to launch Android it says: "The file Android cannot be opened. Either is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file." Since this phone had Android on it when I bought it last week (but it didn't work properly), I'm assuming that is the old Android launcher?? I did reformat the SD card via the Windows side of the phone before I installeded Android just now. Can you or anyone please tell me how I can get Android to launch now?
Thanks again.
Steve
UPDATE: I opened the Android folder and tapped CLRCAD and then HARET again and got the same error message as I explained above when I tap the Android icon. Also, and maybe this is normal since I'm still in Windows, but when I try to open any of the other files in the same folder (like INITRD, ROOTFS, etc., I get an error message that says: "There is no application associated with XXXXX. Run the application first, then open this file from within the application."
Another question please: The guy I bought this phone from was using T-Mobile but I'm going to use Simple Mobile. Does doing all the stuff I just did unlock this phone or do I still need to use an unlock code when I insert the sim card? (I will need to call Simple Mobile to activate the new Simple Mobile sim card in order to transfer my existing number over to this HD2)
Install this .cab in WinMo (install to device not sd)
Soft reset device (just fully off n then on, not factory reset)
try running Android again
Sounds like your phone just doesn't trust Haret, this should make it relax a little
let me know how it goes, it should work for ya
Hi,
i want to transfer my sms and contacts to the s3 with kies. After chosing my newly created and not encrypted itunes backup off the iphone in Kies i get always the following error : "The backup information could not be read. Please choose a valid backup file."
Latest Kies Version and S3 Firmware Version. Can someone tell me how to fix this?
No, but you might want to change the thread to a question, I though this was a tutorial!
You need a Phone to Phone Data Transfer software,have anyone use this:
URL= recovery-iphone.com/phone-to-phone-data-transfer.html
This MobileTrans is a powerful phone to phone data transfer tool lets you seamlessly copy data between Android, Symbian and iOS phones.With one click, you can directly transfer data between two phones,no matter Android phone (HTC, Samsung, etc.), Symbian phone (Nokia, Motorola, etc.) or iOS phone (iPhone 5, iPhone 4S, etc).You can selectively transfer data between any two of them without data loss.Moreover, Directly transfer from one phone to another, no need of any transfer stop during the process.
Sync contacts with Gmail and send yourself texts? Think you can only sync music with kies?
Sent from my GT-I9300 using xda app-developers app
For sms messages transfer, a program called iPhone SMS + MMS to Android Transfer from backuptrans may help. google it.
I have the same problem
Paitor said:
I have the same problem
Click to expand...
Click to collapse
Did the answer above your post work?
Kangburra said:
Did the answer above your post work?
Click to expand...
Click to collapse
Nope, very buggy and bad program.
I managed to get my sms to the phone with another program though.
see this guide: http://faked.org/isms2droid/
iPhone SMS to Android Converter
Step 1: How to find your iPhone SMS database
Jailbreakers: You can either follow the "iTunes Users" instructions, or install OpenSSH via Cydia and use something like scp, WinSCP or Fugu to copy "/var/Mobile/Library/SMS/sms.db" to your desktop.
iTunes Users: If you have a recent backup of your iPhone, or haven't received any new SMS you'd like to move to your Android phone since the last backup, you can skip the first step:
make a backup in iTunes (right-click your iPhone icon in the left pane)
depending on your operating system, go to the folder
Windows 7/Vista: "C:\Users\[USERNAME]\AppData\Roaming\Apple Computer\MobileSync\Backup\"
Windows XP: "C:\Documents and Settings\[USERNAME]\Application Data\Apple Computer\MobileSync\Backup\"
Mac OS X: "~/Library/Application Support/MobileSync/Backup/"
Linux: "/itunes/?/you're/kidding/me/right/?" (seriously, i have no idea if that's ever gonna happen)
if there's more than one folder in there, look for the one which doesn't have a timestamp (-YYYYMMDD-HHMMSS) at the end, and open it
copy the file "3d0d7e5fb2ce288813306e4d4636395e047a3d28" to your desktop
older iTunes versions may use the extensions ".mddata" or ".mdbakup"
on Mac OS X Lion the file doesn't have any file extension
optional: rename "3d0d7e5fb2ce288813306e4d4636395e047a3d28" to "sms.db", if you're a neat-freak
Step 2: Use iSMS2droid
Option 1) Get iSMS2droid on the Android Market
Step 3: Import your messages on Android
If you used Option 1 (the App):
Install SMS Backup & Restore (Android Market Link) to your Android phone, launch it, tap on "Restore", select "iSMS2droid.xml", done!
Click to expand...
Click to collapse
i searched for this but don't think that anyone has posted this method here before (if anyone has posted this method here before then i am really sorry for the Repost)
by using this method you can backup your IMEI/NVRAM and Restore it!!!!!!
if you are facing the "invalid/no IMEI" issue or the "NVRAM error" then you can solve it by using this method!
Do you guy's have a cwm/twrp backup of your original ROM? (the one where everything was fine!!)
if yes , then you can resolve this imei/nvram/wifi_mac issue!!!
you'll need to download MTKDroidTools_v2.4.8 then extract it!!
for taking Backup of your original "IMEI/NVRAM" , just follow these steps:-
1. restore your original ROM's CWM/TWRP backup. (If your ROM is not Rooted, then Root it)
2. Run "MTKdroidTools.exe" from the extracted folder.
3. connect your phone to PC/Laptop through usb cable (no need to switch off your phone, just make sure that "USB Debugging" is enabled)
note:- After connecting your phone the program will display Info of your phone.
4. Click on "root" button at the bottom of that program window. (this gives adb shell access for the program to your phone)
5. Click on the "IMEI/NVRAM" button.
note:- It will open a pop-up window
6. Then click on "Backup" button in that pop-up window. (This will backup your original IMEI and NVRAM )
note:- the backup will be stored in the "BackupNVRAM" folder in the "MTKdroidTools" folder.
now you have the backup of your original IMEI/NVRAM!!!!!!!!!!!!
now flash any ROM that you want to, and after flashing it, if it still gives you the IMEI/NVRAM error just restore the backup that you've just taken
steps to restore the IMEI/NVRAM :-
1. Run MTKdroidTools.exe
2. connect your phone to PC/Laptop through usb cable (no need to switch off your phone, just make sure that "USB Debugging" is enabled)
note:- After connecting your phone the program will display Info of your phone.
3. Click on "root" button at the bottom of that program window. (this gives adb shell access for the program to your phone)
4. Click on the "IMEI/NVRAM" button.
note:- It will open a pop-up window
5. Then click on "Restore" button in that pop-up window.
note:- it will ask for two files (a ".bin" and ".tar" file) ,select the correct files from the "BackupNVRAM" folder.
6. There you go, now your original IMEI/NVRAM has been restored!!!!!!!!!!!!
not sure if you need to restart your phone or not , but i recommend that you restart your phone!!!
I followed the guide to restore the original NVRAM/Bin but it still shows no baseband or IMEI upon restoring. What did I do wrong?
how to restore the nvram folder
keanu_ritz said:
i searched for this but don't think that anyone has posted this method here before (if anyone has posted this method here before then i am really sorry for the Repost)
by using this method you can backup your IMEI/NVRAM and Restore it!!!!!!
if you are facing the "invalid/no IMEI" issue or the "NVRAM error" then you can solve it by using this method!
Do you guy's have a cwm/twrp backup of your original ROM? (the one where everything was fine!!)
if yes , then you can resolve this imei/nvram/wifi_mac issue!!!
you'll need to download MTKDroidTools_v2.4.8 then extract it!!
for taking Backup of your original "IMEI/NVRAM" , just follow these steps:-
1. restore your original ROM's CWM/TWRP backup. (If your ROM is not Rooted, then Root it)
2. Run "MTKdroidTools.exe" from the extracted folder.
3. connect your phone to PC/Laptop through usb cable (no need to switch off your phone, just make sure that "USB Debugging" is enabled)
note:- After connecting your phone the program will display Info of your phone.
4. Click on "root" button at the bottom of that program window. (this gives adb shell access for the program to your phone)
5. Click on the "IMEI/NVRAM" button.
note:- It will open a pop-up window
6. Then click on "Backup" button in that pop-up window. (This will backup your original IMEI and NVRAM )
note:- the backup will be stored in the "BackupNVRAM" folder in the "MTKdroidTools" folder.
now you have the backup of your original IMEI/NVRAM!!!!!!!!!!!!
now flash any ROM that you want to, and after flashing it, if it still gives you the IMEI/NVRAM error just restore the backup that you've just taken
steps to restore the IMEI/NVRAM :-
1. Run MTKdroidTools.exe
2. connect your phone to PC/Laptop through usb cable (no need to switch off your phone, just make sure that "USB Debugging" is enabled)
note:- After connecting your phone the program will display Info of your phone.
3. Click on "root" button at the bottom of that program window. (this gives adb shell access for the program to your phone)
4. Click on the "IMEI/NVRAM" button.
note:- It will open a pop-up window
5. Then click on "Restore" button in that pop-up window.
note:- it will ask for two files (a ".bin" and ".tar" file) ,select the correct files from the "BackupNVRAM" folder.
6. There you go, now your original IMEI/NVRAM has been restored!!!!!!!!!!!!
not sure if you need to restart your phone or not , but i recommend that you restart your phone!!!
Click to expand...
Click to collapse
i have a copied my original lenovo a3000h nvram complete folder..then i paste n overwrite into root/data/ folder but after that i reboot the device n my simcard undetected.. please help n what should i do?
Cant I use the Mtk Droid Tools without rooting my device?
Nvram request...
any1 help me here...i need nvram backup of micromax canvas 4 A210... In which 3g is working without any problem...
ravi09 said:
any1 help me here...i need nvram backup of micromax canvas 4 A210... In which 3g is working without any problem...
Click to expand...
Click to collapse
Hi Ravi,
I have 2 canvas 4 A210 phones,
one is not turning ON and also not detected by computer which is on pure stock not even rooted.
second one is CM11 v0.19 but no GSM signal struggling from last one and half month to restore nothing worked. even after setting the GSM parameter.
If you have found the solution please let me know.
Thanks,
Shiv
First format ur mobile with sp tool than flash latest stock a210 rom .. But first take backup of imei n nvram with mtktool ...if everythings goes right than flash ur cm11 0.19 rom..
i lost my nvram and original rom
dear all
can you help me
my phone is ( Huawei Honor 3C -- model : H30-U10 )
i upgrade to kitkat without backup and then the imei is invalid.
what can i do ?
Captain, can you please help me upload a NVRAM backup for Acer Z205P please.
keanu_ritz said:
i searched for this but don't think that anyone has posted this method here before (if anyone has posted this method here before then i am really sorry for the Repost)
by using this method you can backup your IMEI/NVRAM and Restore it!!!!!!
if you are facing the "invalid/no IMEI" issue or the "NVRAM error" then you can solve it by using this method!
Do you guy's have a cwm/twrp backup of your original ROM? (the one where everything was fine!!)
if yes , then you can resolve this imei/nvram/wifi_mac issue!!!
you'll need to download MTKDroidTools_v2.4.8 then extract it!!
for taking Backup of your original "IMEI/NVRAM" , just follow these steps:-
1. restore your original ROM's CWM/TWRP backup. (If your ROM is not Rooted, then Root it)
2. Run "MTKdroidTools.exe" from the extracted folder.
3. connect your phone to PC/Laptop through usb cable (no need to switch off your phone, just make sure that "USB Debugging" is enabled)
note:- After connecting your phone the program will display Info of your phone.
4. Click on "root" button at the bottom of that program window. (this gives adb shell access for the program to your phone)
5. Click on the "IMEI/NVRAM" button.
note:- It will open a pop-up window
6. Then click on "Backup" button in that pop-up window. (This will backup your original IMEI and NVRAM )
note:- the backup will be stored in the "BackupNVRAM" folder in the "MTKdroidTools" folder.
now you have the backup of your original IMEI/NVRAM!!!!!!!!!!!!
now flash any ROM that you want to, and after flashing it, if it still gives you the IMEI/NVRAM error just restore the backup that you've just taken
steps to restore the IMEI/NVRAM :-
1. Run MTKdroidTools.exe
2. connect your phone to PC/Laptop through usb cable (no need to switch off your phone, just make sure that "USB Debugging" is enabled)
note:- After connecting your phone the program will display Info of your phone.
3. Click on "root" button at the bottom of that program window. (this gives adb shell access for the program to your phone)
4. Click on the "IMEI/NVRAM" button.
note:- It will open a pop-up window
5. Then click on "Restore" button in that pop-up window.
note:- it will ask for two files (a ".bin" and ".tar" file) ,select the correct files from the "BackupNVRAM" folder.
6. There you go, now your original IMEI/NVRAM has been restored!!!!!!!!!!!!
not sure if you need to restart your phone or not , but i recommend that you restart your phone!!!
Click to expand...
Click to collapse
first of all i wanna say thanks for this useful tutorial.
but i found some confusing step in this because of i'm noob.
1. i would like to ask you about how to activated usb debugging in case of my phone couldn't reach setting? it happen because in my phone, after i flashing new rom, there is some activity to login to "mi.account". i cpuldn't login because i " dont havesim card recognised" in other word, invalid imei.
so, i want restore backup IMEI in position custom recovery.
now.. give me tutorial how to activate usb debugging in twrp.
p.s. my phone : xiaomi redmi note 2
OnlyGreen said:
first of all i wanna say thanks for this useful tutorial.
but i found some confusing step in this because of i'm noob.
1. i would like to ask you about how to activated usb debugging in case of my phone couldn't reach setting? it happen because in my phone, after i flashing new rom, there is some activity to login to "mi.account". i cpuldn't login because i " dont havesim card recognised" in other word, invalid imei.
so, i want restore backup IMEI in position custom recovery.
now.. give me tutorial how to activate usb debugging in twrp.
p.s. my phone : xiaomi redmi note 2
Click to expand...
Click to collapse
Good afternoom, if my tablet doesn't pass the logo but I can reach fastboot mode, how can I backup de IMEI and nvram?, it remains that way after it got freezed and I restarted it with the power button.
hey i have canvas hd 116 and i flash it by aosb 4.4.4 rom bt i forgot about taking backup...so now i have face problem with imei and WiFi network....so how can i solve this problem plz help me out.............i cant use WiFi......i can start sim by manually inserting imei no but i cant turn of WiFi it automatically turns off...