auto Startup Sygic - MTCB Software Development

Hi,
Is it possible to let Sygic running into booting the system,
Steven

If you set in factory settings to start up in last state, device will start Sygic if you turn the ignition key off while Sygic running.

I can't change anything like that in factory settings. I have installed the Malaysk ROM RK3066 800 x 600 fuse 4.4.1 dec 2015.
Sent from my ONE E1003 using XDA-Developers mobile app

Related

dcd's 2.x ROM + GPS + time reset

Anyone else getting their System Time on the Titan reset everytime the GPS is used?
Now this may only be related to Garmin XT software. But so far i have tried dcd 2.0, 2.1, 2.2 ROM and all have this issue.
THis is what happens:
1) Start Garmin XT - everthing is OK
2) GPS gets a lock (indoors)
3) At this point is when the system time resets to 7PM (Feb2,2,2008)
That happens every single time the GPS is first accessed.
I can manually Upate the time from the network and it sets correctly, even while Garmin XT is running.
The time stays this way until the Titan turns off (timeouts).
So when i hit the power button. The time resets again as soon as the GPS starts to lock into the Cell towers (AGPS)
I don't have any other GPS apps to try. SO i don't know if its a GPS radio issue.
Basically it looks like the GPS driver or software accesses the system time (probably form the cells towers) and it resets.
Garmin is the culprit, it doesn't happen with any other GPS software.
i dl'd torrent for the tomtom 6 iso us/canada if u like to try
no discussing warez youre going to get yourself in trouble by mods
time
Im also using 2.2.0 and Garmin XT . A couple of mins after I start Garmin, the time resets. This also happend with 2.1.0. Is this also happening with other GPS software?
Traketo said:
Im also using 2.2.0 and Garmin XT . A couple of mins after I start Garmin, the time resets. This also happend with 2.1.0. Is this also happening with other GPS software?
Click to expand...
Click to collapse
This same exact thing was happening to me. I then did a HARD reset by pressing the 2 soft buttons while powering up and then hitting R on the keyboard. I went through the setup wizard for WinMo 6.1 (I'm using dcd 2.2.0) and immediately installed Garmin Mobile XT. Got a sat fix in a few seconds and my time never reset.
I highly doubt Garmin Mobile XT is the culprit. I killed all apps in Task Manager before doing the hard reset and my phone was constantly resetting the time. And after the hard reset and installing ONLY Mobile XT I don't have the problem. I did not install QuickGPS this time and noticed that it runs as a background process.
This was also happening when I would launch Holux GPS Viewer and has even happened to me when I had no GPS software running at all. So either Garmin is installing some sort of filter driver or runs some sort of background process that is completely not obvious to me... or it's just not Garmin and is something else we all have in common.
jrebeiro said:
This same exact thing was happening to me. I then did a HARD reset by pressing the 2 soft buttons while powering up and then hitting R on the keyboard. I went through the setup wizard for WinMo 6.1 (I'm using dcd 2.2.0) and immediately installed Garmin Mobile XT. Got a sat fix in a few seconds and my time never reset.
I highly doubt Garmin Mobile XT is the culprit. I killed all apps in Task Manager before doing the hard reset and my phone was constantly resetting the time. And after the hard reset and installing ONLY Mobile XT I don't have the problem. I did not install QuickGPS this time and noticed that it runs as a background process.
This was also happening when I would launch Holux GPS Viewer and has even happened to me when I had no GPS software running at all. So either Garmin is installing some sort of filter driver or runs some sort of background process that is completely not obvious to me... or it's just not Garmin and is something else we all have in common.
Click to expand...
Click to collapse
Are you sure about that? I haven't yet tried to do the hard reset after updating the ROM. Hard Reset wipes out everything right?
Which soft keys did you push when power up?
What exactly is the procedure?
THis is what I found out so far. I would say that it is indeed Garmin XT that is causing the issue, or at leat the Intermediate Driver that its using.
Basically its like this:
Garmin XT receives a GPS lock and syncs the GPS time with the Titan's System Time.
When Garmin XT locks onto only the AGPS it syncs with what im assuming is the Cell phone tower time or partial time if it can't triangulate. Hence the incorrect system time sync.
However, if you are outside and have actual Satellite GPS locks, Garmin will sync to the correct time.
So the temporarly work around is either.
Turn on Garmin while your outside and have your phone ON (not in standby). So keep it ON for a couple mins, before starting Garmin XT. This will pickup GPS not just AGPS.
or Start Garmin XT as usual.
At which point your System Clock will change with the Sync to an incorrect time. Now wait for full GPS Sat lock (3D is best). At this point DISABLE GPS (within Garmin XT) and renable it again. And BAMM...just like that the clock will change to the correct time, since it has this info from the GPS Sats.
So my conclusion is that Garmin Syncs the Titan's System Time to GPS time. BUt like i said it could just be the intermediate driver.
Note that i tried Google Mobile with GPS and did not have this issue.
So the real question should be, is how to Disable Garmin from Syncing our System Time?? ANyone?
CannonBaller said:
THis is what I found out so far. I would say that it is indeed Garmin XT that is causing the issue, or at leat the Intermediate Driver that its using.
Basically its like this:
Garmin XT receives a GPS lock and syncs the GPS time with the Titan's System Time.
When Garmin XT locks onto only the AGPS it syncs with what im assuming is the Cell phone tower time or partial time if it can't triangulate. Hence the incorrect system time sync.
However, if you are outside and have actual Satellite GPS locks, Garmin will sync to the correct time.
So the temporarly work around is either.
Turn on Garmin while your outside and have your phone ON (not in standby). So keep it ON for a couple mins, before starting Garmin XT. This will pickup GPS not just AGPS.
or Start Garmin XT as usual.
At which point your System Clock will change with the Sync to an incorrect time. Now wait for full GPS Sat lock (3D is best). At this point DISABLE GPS (within Garmin XT) and renable it again. And BAMM...just like that the clock will change to the correct time, since it has this info from the GPS Sats.
So my conclusion is that Garmin Syncs the Titan's System Time to GPS time. BUt like i said it could just be the intermediate driver.
Note that i tried Google Mobile with GPS and did not have this issue.
So the real question should be, is how to Disable Garmin from Syncing our System Time?? ANyone?
Click to expand...
Click to collapse
Your right on CannonBaller. I'm seeing the exact same behavior. But now that I think about it, I've been running Garmin Mobile 10 (Garmin with the external GPS) for 6 months and I never had a problem until I upgraded to the ROM from here. This isn't a cooked ROM because I didn't need to unlock my phone to install it. I'm not too familiar with kitchens and cooking so I kept it simple and just installed the basic one that came out in January.
But if we're seeing the same behavior from WM61 ROMs then that tells me that it's something in the WM ROMS. Would you agree? I hope this isn't the case because that may mean that the official HTC ROM could have the same problem and that would SUCK!
it is Garmin XT. Same thing happens to me. What I have done is I run quickgps to get a lock, close that app and then open garmin and it gets a lock within a few seconds. If you run garmin without getting a lock on your location within a certain amount of time (not sure the amount) it will reset your clock as well as the date. Then when you update your phone to the correct date/time you will receive all the appointment and alarm notifications that occurred between the date and time it went back to and the current date and time.
In conclusion it is easiest for me to just get a gps lock with quickgps and then load garmin.
axion68 said:
it is Garmin XT. Same thing happens to me. What I have done is I run quickgps to get a lock, close that app and then open garmin and it gets a lock within a few seconds. If you run garmin without getting a lock on your location within a certain amount of time (not sure the amount) it will reset your clock as well as the date. Then when you update your phone to the correct date/time you will receive all the appointment and alarm notifications that occurred between the date and time it went back to and the current date and time.
In conclusion it is easiest for me to just get a gps lock with quickgps and then load garmin.
Click to expand...
Click to collapse
I think you mean GPSViewer not QuickGPS. QuickGPS downloads EE data from the internet.
I too have resorted to getting a fix with GPSViewer before loading Mobile XT and have had great results. I searched for a registry key or something to disable time sync but I didn't find anything.
jrebeiro said:
I think you mean GPSViewer not QuickGPS. QuickGPS downloads EE data from the internet.
I too have resorted to getting a fix with GPSViewer before loading Mobile XT and have had great results. I searched for a registry key or something to disable time sync but I didn't find anything.
Click to expand...
Click to collapse
Maybe someone can write a script that automates this. I tried writing on that automatically syncs the clock to the cell network (via settings on the comm manager) after MobileXT is closed, but the RunWait command wasn't working properly.
This same issue, except with Garmin Que is in this thread: http://forum.xda-developers.com/showthread.php?t=368035
Apparently there is a setting to fix it via Menu>System Setup>General Tab>Uncheck the Synchronize system clock, but that menu option isn't in Mobile XT. It does give hope that there might be a registry setting for it somewhere though.
Has anyone asked Garmin about this?
JimSmith94 said:
Has anyone asked Garmin about this?
Click to expand...
Click to collapse
I sent them something a couple weeks ago and this was the dialog:
Me:
I've had both Garmin Mobile 10 as well as Garmin Mobile XT and both are
resetting my system clock on my phone to 7pm, 5 days ago. Very
frustrating because every time I go to use Garmin, I have to reset the
system time.
I'm running:
Garmin Mobile XT 4.10.40wp
Window Mobile 6 Professional CE OS 5.2.1622
any ideas? Thanks
Them:
Thank you for contacting Garmin International.
This is the first that we have heard of the Garmin software resetting
the date and time in a Cell phone. They are typically updated by the
Cell towers of the phone provider. If this device also has a built in
gps, it may be resetting your date and time.
I recommend contacting the manufacturer of the phone to make sure it is
completely up to date.
If you continue to experience this issue, feel free to call our 800
number listed below for more information.
With Best Regards,
Anthony L
I'm still hoping that the official ROM will fix this. I didn't have this problem when I was using an external GPS receiver. I have a friend who has a Tilt using Garmin XT and her time does not reset.
This leads me to believe the problem lies within the pre-release ROM that opened up the internal GPS for my Mogul. I know all signs are pointing to Garmin but I haven't been convinced that it isn't the new ROM that's the culprit. If you know it's the Garmin software, please explain to me how it is so I can move on in life. =)
jrebeiro said:
I think you mean GPSViewer not QuickGPS. QuickGPS downloads EE data from the internet.
I too have resorted to getting a fix with GPSViewer before loading Mobile XT and have had great results. I searched for a registry key or something to disable time sync but I didn't find anything.
Click to expand...
Click to collapse
oops, you are right. i use gps viewer to get a fix first and then close out of that and open garmin xt up. kind of a pita. ive got a garmin standalone and im used to that interface. i still might switch to tomtom but i would like to see an official radio release first
I have the same problem with Garmin using internal gps.
I'm using DCD's 2.0.0, which is wm6.
It resets my clock to 4pm, but then resets back to the correct time usually within a half hour.
Since using the internal gps with Garmin requires a hack, maybe it's related to this.
I also use TomTom 6 and Sprint Nav, and don't have this problem with either of those programs.
Garmin has better graphics though..
I'd like to 2nd, 3rd, whatever the issue with garmin xt using the internal gps and resetting / changing the time.
very annoying... however garmin is simply so much better than tomtom that I will suffer through it until I can find a workaround.
I checked Garmin's site last night just to see if they had any new updates and came across this:
Garmin Mobile XT for Windows Mobile Ver. 4.20.20w as of Feb 26, 2008 Download.
On their initial software update page, it says last update for Garmin Mobile XT for Smartphones was November 14, 2007. But if you click on the link you see more recent updates.
I downloaded and installed it. I've soft resetted and booted up Garmin without booting up any helper GPS app (instantGPS, GPSViewer) and my time hasn't changed since I installed this version. I've been using it all morning and it hasn't changed once.
I'm running:
ROM version 3.16.651.0
Garmin 4.20.20wp
my time isn't changing =)
emooney said:
I checked Garmin's site last night just to see if they had any new updates and came across this:
Garmin Mobile XT for Windows Mobile Ver. 4.20.20w as of Feb 26, 2008 Download.
On their initial software update page, it says last update for Garmin Mobile XT for Smartphones was November 14, 2007. But if you click on the link you see more recent updates.
I downloaded and installed it. I've soft resetted and booted up Garmin without booting up any helper GPS app (instantGPS, GPSViewer) and my time hasn't changed since I installed this version. I've been using it all morning and it hasn't changed once.
I'm running:
ROM version 3.16.651.0
Garmin 4.20.20wp
my time isn't changing =)
Click to expand...
Click to collapse
That update fixed my time issue as well. I also seem to get more SATs much faster. I soft reset my phone and fired up Garmin. I instantly had a lock on 8 SATs. Nice find.
emooney said:
I checked Garmin's site last night just to see if they had any new updates and came across this:
Garmin Mobile XT for Windows Mobile Ver. 4.20.20w as of Feb 26, 2008 Download.
On their initial software update page, it says last update for Garmin Mobile XT for Smartphones was November 14, 2007. But if you click on the link you see more recent updates.
I downloaded and installed it. I've soft resetted and booted up Garmin without booting up any helper GPS app (instantGPS, GPSViewer) and my time hasn't changed since I installed this version. I've been using it all morning and it hasn't changed once.
I'm running:
ROM version 3.16.651.0
Garmin 4.20.20wp
my time isn't changing =)
Click to expand...
Click to collapse
I tried this new version today. My clock still changes before I get a fix (no bars in the GPS strength meter in the main menu), but it does re-update to the correct time after it gets a fix. Better than before, but problem NOT solved.

[Q] NFC not working after profile switch

I'm not sure how wide spread this issue is but it seems like an operating system issue. I'm using Jellybean 4.3 on my nexus 4 with a customer rom crDroid. I have another nexus 4 with stock rom and not rooted and a nexus 7.
My tablet has 2 profiles on it. My wifes and mine. If I log into myself and try to transfer via nfc from my nexus 4 phone to the tablet it works great. But then when I switch to my wifes profile I can't transfer anything. It comes up with the notification to click to beam. But it doesn't allow me to beam anything. I have to restart the tablet and log in as my wifes account first to be able to nfc to her profile.
I'm thinking this is an glitch with android 4.3 Can anyone confirm this issue and whether it is a an operating system glitch or maybe just a nexus glitch.

Poor GPS

I'm struggling with really poor GPS signal. It either fails completely to find a GPS signal at the start or loses it mid way. I'm an avid strava user and I find it very difficult to find a GPS signal. I've just got back from a ride which I've ridden loads using my HTC one and strava, and the z2 lost signal for half the ride. I've tried runkeeper too which i has the same problem so I don't think its the app. Weirdly, Google maps can find me OK. I've reinstalled the apps many times and checked all my location settings.
Any ideas or is anyone having the same problem?
Sent from my Nexus 7 using XDA Free mobile app
This is a 4.4.2 issue, not a sony issue
You will have to wait for sony to release android 4.4.4 or android 5.0
I seems to be a sort of base module kinda thing
It also seems to be partialy fixed in the 438 firmware
Sent from my D6503 using XDA Premium 4 mobile app
So is there no fix for this until I get an update?
I'm running 5.1 on my z2 and it does the same thing. The GPS in Google maps or Garmin will be working fine, then it just acts as though I've stayed in place, even though I'm still driving. Is there a patch or something I can flash that'll fix this (I am rooted with a locked bootloader)?
Try some apps on Google Play. I use this: https://play.google.com/store/apps/details?id=com.silentlexx.gpslock

Greenify 2.5 beta 2 don't turn off display in impulse mode

Hi there,
Last beta don't turn off display after hibernate in bost mode.
In root mode works fine.
Verified admin privileges
Same issue here with today's beta. Boost mode enabled, hibernate+lock screen shortcut only hibernate. Verified admin privileges for greenify.
Sent from my VS980 4G
+1 here.
Yep.
Running a Nexus 7 2013 with Cyanogenmod 11 Official with current nightly. Also running a Samsung Galaxy S3 Mini (SM-G730V) on Verizon running 4.4.2 Stock Firmware but rooted with Towelroot, using Super SU 2.14 with Xposed installed. Can also confirm the Hibernate + Lock shortcut does not lock the screen on either system. It hibernates the apps and I get a toast message saying as much, but the screen refuses to shut off. On both systems I verified SuperSU had granted permission to Greenify and that Greenify was enabled as an administrator under security settings. If you need any logs, let me know and I'll be glad to help.
Same here. Hibernate + lock screen does not work in any mode. Hibernate apps, but screen still on. Alps a9500 stock Chinese rom.
i'm using xperia z2, apps hibernated but screen wont turn off
My Nexus 4 also has the same issue. @oasisfeng, it seems that 2.5 beta 2 is having a bug.
My Nexus 5 also has the same issue.
+1
Only works in root mode ..
wilkster said:
Same issue here with today's beta. Boost mode enabled, hibernate+lock screen shortcut only hibernate. Verified admin privileges for greenify.
Sent from my VS980 4G
Click to expand...
Click to collapse
Fixed with today's beta.
Sent from my VS980 4G
It works with beta3.
Thanks @oasisfeng :highfive:
Now works fine ?

All of a sudden can't connect to any wifi

All of a sudden can't connect to ANY wifi. Sees them, says saved, but keeps trying but won't get past "saved." You can see the page of wifi options kind of blink like it's trying but nothing.
Have tried "forget", rebooting to safe mode, airplane mode, reboot after reboot, but the wifi indicator stays clear and says disconnected.
Hardware failure? Any ideas?
MLT2004 said:
All of a sudden can't connect to ANY wifi. Sees them, says saved, but keeps trying but won't get past "saved." You can see the page of wifi options kind of blink like it's trying but nothing.
Have tried "forget", rebooting to safe mode, airplane mode, reboot after reboot, but the wifi indicator stays clear and says disconnected.
Hardware failure? Any ideas?
Click to expand...
Click to collapse
My next step would be to clear cache partition, then factory reset if that does not work.
How do you clear the cache partition?
Power down, then hold the power and volume down button simultaneously until the device boots. You'll arrive at a screen with an Android laying on it's back with it's belly open. Press the power and volume up simultaneously to display the recovery menu. Choose Wipe cache partition and respond Yes to the prompt.
cant connect to wifi
hello i have the exactl same problem after the nougat update suddenly my nexus 9 cant connect to wifi however it can connect to other wifi networks and through my phone hotspot i have tried a factory reset without any luck please any suggestion ?
Hi, I have exactly the same problem after the upgrade to Android N, arrived by OTA
I have done everything, starting from the ROOT with Nexus ToolRoot from the PC, but any luck!
My dubt is that my tablet was rooted already and, like that, I couldn't upgrade It by OTA to the 6.1. It opened the Recovery page and stop.
With Android N it works, but I have this problem with the WiFi now.
My second dubt is that I can go in recovery only using NexusToolRoot, but if I try from the table it Shows me the robot and "No Command FounD"
Some can help us?
mirkorazietti said:
Hi, I have exactly the same problem after the upgrade to Android N, arrived by OTA
I have done everything, starting from the ROOT with Nexus ToolRoot from the PC, but any luck!
My dubt is that my tablet was rooted already and, like that, I couldn't upgrade It by OTA to the 6.1. It opened the Recovery page and stop.
With Android N it works, but I have this problem with the WiFi now.
My second dubt is that I can go in recovery only using NexusToolRoot, but if I try from the table it Shows me the robot and "No Command FounD"
Some can help us?
Click to expand...
Click to collapse
Try the Nexus Root Toolkit from Wugfish...... With this tool you can also reinstall completely to Stock.
Sent from my Nexus 9 using XDA-Developers mobile app
giancarlo_f said:
Try the Nexus Root Toolkit from Wugfish...... With this tool you can also reinstall completely to Stock.
Sent from my Nexus 9 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes I'm using It, I forgot the right name!
So You suggest me ti downgrade to 6.1?
mirkorazietti said:
Yes I'm using It, I forgot the right name!
So You suggest me ti downgrade to 6.1?
Click to expand...
Click to collapse
First I would try Android 7 (with the toolkit); if that does not work back to 6.1
Sent from my Nexus 9 using XDA-Developers mobile app
I see that You are using a Nexus 9 too. HAve YOu installed Android N without any problems?
mirkorazietti said:
I see that You are using a Nexus 9 too. HAve YOu installed Android N without any problems?
Click to expand...
Click to collapse
Yes, everything is working fine. If you ask me it's even more smooth than 6!
Sent from my Nexus 9 using XDA-Developers mobile app
I hate to bring up an old thread but I just bought a Nexus 9 and it ran great. I installed an app that it must not have liked and it required me to do a factory reset. Now (during setup) it wont join my existing router. There is no skip button (which is completely ridiculous), but it does 'save' my password, and occasionally it says 'bad authentication'. I've tried rebooting routers, different routers, hot spots, clearing cache, etc. I've even tried various network settings within my router. Again, no luck. I've even successfully reflashed the OS using ADB sideload.
Current vers. is Nexus 9 32GB, Wi-Fi, 7.1.1 (N9F27M, Oct 2017).
Here's the kicker... once in a 'blue moon' it will connect to my router for a very brief moment. Long enough for it to attempt to contact Google servers. It then loses connection, as if it were shutting down it's own Wi-Fi connection internally. Sadly, a connection point is required to continue with setup which, again, is completely ridiculous...
I'm familiar with ADB and Fastboot. I've even tried Wugfresh's software with no luck. Is there any way of unlocking the tablet so I can try out different things? I'd be great if I could unlock the darn thing without having to go through the menus in the OS, but I have no access to them.
Anyone have any thoughts or experience something this strange? How did you fix it?
Sky173 said:
I hate to bring up an old thread but I just bought a Nexus 9 and it ran great. I installed an app that it must not have liked and it required me to do a factory reset. Now (during setup) it wont join my existing router. There is no skip button (which is completely ridiculous), but it does 'save' my password, and occasionally it says 'bad authentication'. I've tried rebooting routers, different routers, hot spots, clearing cache, etc. I've even tried various network settings within my router. Again, no luck. I've even successfully reflashed the OS using ADB sideload.
Current vers. is Nexus 9 32GB, Wi-Fi, 7.1.1 (N9F27M, Oct 2017).
Here's the kicker... once in a 'blue moon' it will connect to my router for a very brief moment. Long enough for it to attempt to contact Google servers. It then loses connection, as if it were shutting down it's own Wi-Fi connection internally. Sadly, a connection point is required to continue with setup which, again, is completely ridiculous...
I'm familiar with ADB and Fastboot. I've even tried Wugfresh's software with no luck. Is there any way of unlocking the tablet so I can try out different things? I'd be great if I could unlock the darn thing without having to go through the menus in the OS, but I have no access to them.
Anyone have any thoughts or experience something this strange? How did you fix it?
Click to expand...
Click to collapse
You can skip the whole setup process and don't need WiFi. At least I know you can with the latest factory image.
Sent from my [device_name] using XDA-Developers Legacy app
jd1639 said:
You can skip the whole setup process and don't need WiFi. At least I know you can with the latest factory image.
Sent from my [device_name] using XDA-Developers Legacy app[/ul]
Click to expand...
Click to collapse
Thanks for the reply. Today, the tablets WiFi connected long enough to register it to my Google account so I could use it. I enabled developer tools in the 'settings' section and I also enabled 'OEM unlocking (allow the bootloader to be unlocked)' in the dev options.
I was extremely happy as it seemed to stay connected for quite some time. Then before you know it, the Wi-Fi shut down again and I get authentication error messages. Do you have a link for the latest factory image? I last flash was with the full OTA Image I found on Googles site (N9F27M, Oct 2017).
Should I flash again with a factory image instead because The OTA image doesn't give any type of 'skip Wi-Fi' button.
Thanks again!
Sky173 said:
Thanks for the reply. Today, the tablets WiFi connected long enough to register it to my Google account so I could use it. I enabled developer tools in the 'settings' section and I also enabled 'OEM unlocking (allow the bootloader to be unlocked)' in the dev options.
I was extremely happy as it seemed to stay connected for quite some time. Then before you know it, the Wi-Fi shut down again and I get authentication error messages. Do you have a link for the latest factory image? I last flash was with the full OTA Image I found on Googles site (N9F27M, Oct 2017).
Should I flash again with a factory image instead because The OTA image doesn't give any type of 'skip Wi-Fi' button.
Thanks again!
Click to expand...
Click to collapse
Just Google Nexus factory image. That has all the images for all the Nexus devices. Just make sure you get the one for the n9. They're ones for WiFi only and ones for lte devices. So get the one for your device.
Sent from my [device_name] using XDA-Developers Legacy app
Sky173 said:
Thanks for the reply. Today, the tablets WiFi connected long enough to register it to my Google account so I could use it. I enabled developer tools in the 'settings' section and I also enabled 'OEM unlocking (allow the bootloader to be unlocked)' in the dev options.
I was extremely happy as it seemed to stay connected for quite some time. Then before you know it, the Wi-Fi shut down again and I get authentication error messages. Do you have a link for the latest factory image? I last flash was with the full OTA Image I found on Googles site (N9F27M, Oct 2017).
Should I flash again with a factory image instead because The OTA image doesn't give any type of 'skip Wi-Fi' button.
Thanks again!
Click to expand...
Click to collapse
You can skip the setup wizard by tapping the 4 corners of the screen. Clockwise I think.
jd1639 said:
Just Google Nexus factory image. That has all the images for all the Nexus devices. Just make sure you get the one for the n9. They're ones for WiFi only and ones for lte devices. So get the one for your device.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Ok, I'll try again. It'll be my tenth time, lol.
madbat99 said:
You can skip the setup wizard by tapping the 4 corners of the screen. Clockwise I think.
Click to expand...
Click to collapse
Good to know. If I get locked out again, I'll give it a try.
Just to add to the description of the problem, the WiFi light doesn't come on at all. Only once in a while it does and that's when I get connection (naturally). I also looked at the WiFi menu and this is the error I see under my connection:
Home_Connection
Saved [(1)
{ec:08:6b:blah:blah:blah:60=2412,-62};]
Network_Selection_Disabled_Association_Rejection =4
Network_Selection_Disabled_Authentication_Failure=4
Anymore suggestions, I'm all ears.
Thanks again guys. Really appreciate it.
I have the same issue as well.
I have the same issue. Tried two custom ROMs - 6.0.1 and 7.1.1 Android versions - then went back to the stock OTA version but still I'm having issues with the WiFi. Every so often it will allow me to briefly connect but it won't stay on for long. I'm using a Nexus 9 WiFi device. I've also noticed that the settings app doesn't respond all that well basically - including the normal power off/ restart features. I have to hard reset it by holding down the power button for 5 seconds.

Categories

Resources