Hello all. I've been trying to flash Helios rom for my s7 edge but I keep failing. First of all, my device is exynos so it should be good to root. However, when I check TWRP page it says ''This device uses dm-verity!
This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab.''
I've tried flashing TWRP but failed into a bootloop, flashed a stock rom to recover. The rom needs TWRP to be installed and I just can't get it working. Maybe I'm using a wrong version of TWRP, or doing something wrong? Any help is appreciated, thank you.
Edit - I faced ''recovery is not seandroid enforcing'' on my last try. Been trying different rooting files to find anything works. Couldn't find anything yet.
I would certainly like to root my Poco F1. However, after reading loads of topics, I'm still not sure of which way to choose, because I have a bit of a problem with the jargon.
I want the face unlock to be working
I want to get rid of MIUI and have clean Android (for example Smart Lock doesn't work with MIUI)
I want to use gestures to navigate through the phone
Hence, I am probably looking for a custom ROM?
If I understand correctly, I need to:
Unlock the bootloader, then flash TWRP, then flash the custom ROM, then flash Magisk... and everything is done (?)
If I want to revert to stock ROM, I will just wipe everything, am I right?
Would these custom ROMs do?
https://forum.xda-developers.com/poco-f1/development/rom-pixel-experience-t3857076
https://forum.xda-developers.com/poco-f1/development/rom-nitrogen-os-beta-t3857557
Thank you all!
You need to flash the appropriate vendor as well. You can find the list of vendor firmwares for download here:
downloads. akhilnarang .me/MIUI/beryllium/
Most custom roms require a specific requirement for vendor. I'd recommend flashing the latest vendor, it shouldn't cause issues.
Magisk flashing isn't a necessary step, unless you prefer root access. Make sure to back up your data because your phone will get encrypted on first boot and all your data will be lost, not to mention the data loss during bootloader unlock. You can use force encryption disabler to disable encryption. But note that you will have to flash the zip every time you flash a new ROM/vendor or else it will get encrypted again.
Also. Pixel experience is a good ROM for stock android experience, but I would recommend lineage OS unofficial over it because of the customisation it provides. I haven't used Nitrogen OS in a long time, so I cannot judge on it.
PS: don't forget gapps. Custom ROMs don't have gapps included.
Let's correct a few things in kishore1998's post. First since the OP needs to unlock his bootloader, when he does that he'll lose all data. OP, if your data is important, backup to an external source before you start. After unlocking you'll need a recovery as stated before. Next is flashing vendor/firmware. After that , flash the rom of your choice. In it's OP it should tell you whether you need gapps or not. PE doesn't require gapps. Reboot, make sure all is fine then go back into recovery and flash Magisk. I'm on vendor/firmware 9.5.6, PE-AOSP-20180507 & Magisk 19.1. NOTE: I don't use DFE nor do I need it. You only need DFE if you want an unencrypted fone. If you do flash DFE, everytime you flash vendor/firmware your _next_ step is to flash DFE. TWRP allows you to stack zips to flash so you'll choose vendor/firmware and DFE, then flash before doing rom and gapps if needed. See this link which has a useful FAQ.
HTH
Matt.Murdock said:
I would certainly like to root my Poco F1. However, after reading loads of topics, I'm still not sure of which way to choose, because I have a bit of a problem with the jargon.
I want the face unlock to be working
I want to get rid of MIUI and have clean Android (for example Smart Lock doesn't work with MIUI)
I want to use gestures to navigate through the phone
Hence, I am probably looking for a custom ROM?
If I understand correctly, I need to:
Unlock the bootloader, then flash TWRP, then flash the custom ROM, then flash Magisk... and everything is done (?)
If I want to revert to stock ROM, I will just wipe everything, am I right?
Would these custom ROMs do?
https://forum.xda-developers.com/poco-f1/development/rom-pixel-experience-t3857076
https://forum.xda-developers.com/poco-f1/development/rom-nitrogen-os-beta-t3857557
Thank you all!
Click to expand...
Click to collapse
hey bro . you should first unlock bootloader with miunlock .you need waiting 66 hours . after that download developer rom (pejmimx) rememeber that most be pejmimx, search in google and download the final version. install twrp with minimal adb if your poco didnt connect to your pc in fastboot mode you need to change your pc (just once time ) . flash data system cache davlik (you should have micro sd or conect flash memory with otg to your phone). install rom dev pejmimx. install your favorite custome rom . install magisk and done .(donot install oxygen os because that is ported from one plus 6t and have much bugs) my suggest is crdroid rom
Matt.Murdock said:
I would certainly like to root my Poco F1. However, after reading loads of topics, I'm still not sure of which way to choose, because I have a bit of a problem with the jargon.
I want the face unlock to be working
I want to get rid of MIUI and have clean Android (for example Smart Lock doesn't work with MIUI)
I want to use gestures to navigate through the phone
Hence, I am probably looking for a custom ROM?
If I understand correctly, I need to:
Unlock the bootloader, then flash TWRP, then flash the custom ROM, then flash Magisk... and everything is done (?)
If I want to revert to stock ROM, I will just wipe everything, am I right?
Would these custom ROMs do?
https://forum.xda-developers.com/poco-f1/development/rom-pixel-experience-t3857076
https://forum.xda-developers.com/poco-f1/development/rom-nitrogen-os-beta-t3857557
Thank you all!
Click to expand...
Click to collapse
There are a lot of guides here that describe the things you want.
Some checkpoints:
-Unlock your bootloader and install twrp (all personal data will be deleted)
-make a backup of your phone (when you backup check all partitions and images). This is your original system in case you want to go back. There's no particular reason to get more.
-install a custom ROM (crdroid that was suggested above is great imho) FOLLOW THE ROM'S INSTALLING INSTRUCTIONS TO THE COMMA.
-install nano-gapps and above if you want face unlock (pico and micro won't have it)
-flash magisk if you want root (don't forget to install magisk apk after flashing it)
-last but not least regardless of what's mentioned anywhere use official twrp and DON'T flash encryption disabler. It's just going to make your life harder without any benefits whatsoever.
Thank you, very helpful and assuring!
One more thing though - I often use dual boot of some apps. This is a Xiaomi-only feature; Does that mean with a different ROM (but for a Xiaomi device) I will lose this possibility?
I mainly just want to get rid of the MIUI ballast that interferes with the clean Android, so if there is a possibility to keep the ROM and delete MIUI, it would be maybe even better (?)
Hello. I recently tried the Pixel Experience (to test the GCam) after unlocking the bootloader and rooting my phone with Magisk. Everything ok, if not for the fact that finding myself better with the MIUI I decided to format the smartphone and put the Xiaomi.eu ROM on it. Everything went well but when I went to see if the API2 were still enabled (besides finding them NOT enabled) I saw that the smartphone gave NOT ROOTED!
I tried to redo the usual procedure with MAGISK but always error:
"Unsupported / Uknown image format" at the time of Unpacking Boot Image
Why?
How can I re-root my device?
Thank you and sorry for my english....
Its probably rom issue. Reflash the rom with orange fox recovery and flash latest magisk 19.3.
Hello
I have a poco f1 and I tried to flash from a week ago and here are the problems I faced.
1) I have shifted from latest miui to pixel experience plus from last week and the first problem I faced was when I tried to flash disable force encryption my phone didn't boot in the room it would get stuck on the google logo I did flash dfe while after flashing twrp to permanently install it but my device was still encrypted. Because of this, I have to remove all passwords before flashing anything.
2) After I tried PEP Rom I wanted to shift to evolution x and I downloaded the last built 4.7 android 10 official for poco f1 and flashed it in twrp and it was installed successfully but when I click on reboot system twrp showed no os installed. No one faced this problem but idk y I did.
3) My twrp doesn't show any portion to wipe vendor so I planned to shift on orange fox today and saw that as I install orange fox it would get stuck on orange fox logo and doesn't boot up.
Finally, I read this on some site
This device uses dm-verity!
This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab.
I never installed any custom kernel before installing PEP Rom on my device and people say that we have to flash lazy flaser what is this.
plz do explain every think in detail as i tried asking many YouTubers non of them responded.
Thank You
When all fails. The only solution is to flash miui stock rom.
Hi. I installed Android 12 Pixel Experience rom and my TWRP gone after this. After installing the rom, TWRP replaced with Pixel Experience's own recovery mode. Currently, the ROM is installed and I can use it without any problems, but I cannot switch to a different ROM in any way. When I install TWRP with ADB, I cannot install the file named "DM Verity & ForceEncrypt disabler" because everything is encrypted. I do not use any passwords on the ROM (fingerprint, screen lock, etc.). I want to install new ROM so I need to make TWRP permanent and remove encryption on TWRP, because i can't see my files. As I said, the phone is can open and I can use it without problems. Looking forward to your help, thank you.
1) Backup everything
2) Install twrp and sideload the PE rom but don't boot into it
3) Flash the DFE (disable force encryption ) zip from twrp
4) Boot into the rom
Remember you won't get the ota updates if you disable the encryption and have to manually update the rom
easdasd617 said:
Hi. I installed Android 12 Pixel Experience rom and my TWRP gone after this. After installing the rom, TWRP replaced with Pixel Experience's own recovery mode. Currently, the ROM is installed and I can use it without any problems, but I cannot switch to a different ROM in any way. When I install TWRP with ADB, I cannot install the file named "DM Verity & ForceEncrypt disabler" because everything is encrypted. I do not use any passwords on the ROM (fingerprint, screen lock, etc.). I want to install new ROM so I need to make TWRP permanent and remove encryption on TWRP, because i can't see my files. As I said, the phone is can open and I can use it without problems. Looking forward to your help, thank you.
Click to expand...
Click to collapse
You need to read the instructions before you flash anything. PE A12 is encrypted by default and because TWRP can't handle the decryption of A12 ROMs, PE replacing the TWRP with PE Recovery, so to be able to get OTA updates. This is a workaround until TWRP fix the decryption issue.
To flash another ROM, take backup of the files you want from your Internal Storage, flash TWRP via ADB, wipe everything and format data. Then connect your device to PC and transfer the ROM and the files you want to flash into your Internal Storage and proceed with flashing.