never root boot loop stuck in download mode SGH-1777 Won't do anything else? HELP?:crying: I read your other threads but it is stock and I have no clue on root.
I just want a working phone! My new S7 won't even turn on!! No matter what I do?? Kies won't even see either phone! I tried uninstall and reinstall didn't work either. Please help me?
Deleted by poster.
Well you said i777 then you said s7. If you have a i777 you're in the right forum. The s7 forum is over there somewhere.
Download the MD8 firmware odin tar file, put phone in download mode, connect phone to computer, then flash it. If that gets it working ok, if not then throw your phone into recovery mode and do a data factory reset.
What StoneyJSG said. The odin file is found here
fast download
https://www.androidfilehost.com/?fid=24052804347826277
slow download
http://www.sammobile.com/firmwares/download/15434/I777UCMD8_I777ATTMD8_ATT/
You will need samsung usb drivers and odin. There are many guides on how to flash stock fw with odin.
Related
So I'm selling my Note 2 and yesterday I did a reset but the device went to a bootloop, doesn't pass the flashing Samsung Logo.
My Device was using L900SPTBMK4 and I want to do a restore. Kies doesn't recognize it when in Download mode, does it when is on the loopboot but never finished the connection, stuck a connecting.
In odin the device isn't recognized when in download mode either, as Kies, it recognize the device when stuck a the bootloop. I don't to if is safe to try a flashing in this mode.
Using ODIN v3.09
Autoreboot checked
F. reset Time checked
I don't remember what download mode I suppose to choose from BL/AP/CP
I also have this file L900VPUBMK4_L900SPTBMK4_HOME.tar.md5 to try the flashing if recommended.
Thank you for the support
Forgot to tell, I don't have any recovery option installed.
I just can go to the Download Mode
Guys, the device has been recognized by Odin on my work PC.
Just need to know what file is the correct to be flash by Odin and what option do I need to check,
Regards
:laugh:
Downloaded SPH-L900_MK4_Full Restore_UNROOTED (Compressed Archive) and after that I ran it, was uncompressed and the I ran the uncompressed file called SPH-L900_MK4_Full Restore_UNROOTED.exe with the device in download mode and everything worked like a charm.
From the beginning I understood that this was what has to be done but of course 'my awareness' was about the correct file need it.
Thank you
HELP!! Sinple issue ?? Custom Rom Question.
Ok, First I want to Say Thanks for all you do.
Now, My Question is :
I am successfully Flashing any and every rom I try using cwm.
My Problem occurs after flashing and successfully rebooting into new custom Rom, I am running the new Roms. Tweaking and Tinkering with ROM just fine.
but if I run out of battery or somply reboot or turn off my Sprint Note 2 L900, It DOES not boot back into the rom?? What am I Missing or Not doing ? How Can I get it to stick thru turning off and on ??
Any Help is appreciated, Just cant get it to boot everytime like Stock Rom does out of the box.
Thanks !!
Hello.
I tried to flash stock XEO ROM to my S3, but while the whole process it stuck on loading system.img. Then when i tried to turn on the phone it shows me the yellow triangle and info that i can recover the system with Kies. But it also didn't work. I tried to flash other stock roms but it always is stuck in booting system.img
FIX:
I downloaded different roms and different ver. of android
Tried to flash several times with pit file and without but it was still stuck at system.img
I tried different ports and the result was the same
I changed the cable and reinstalled drivers and I succeed to flash 4.0.4 ver without pit file with odin 3.07
Have you tried flashing stock rom via ODIN?
Yeah, that's what I'm talking about I tried several times and it still doesn't work :crying:
voonkz said:
Yeah, that's what I'm talking about I tried several times and it still doesn't work :crying:
Click to expand...
Click to collapse
Did you try install stock firmware with PIT file?
If you have 16 GB version of GT-I9300, you can try this PIT file (I tested on my device).
Odin 3.07 with PIT file;
http://forum.xda-developers.com/attachment.php?attachmentid=2762337&d=1401023420
Download a stock ROM from sammobile, then put it to PDA. Before start flashing, press PIT button on Odin and select the PIT file, then press Start.
I decided to send my phone to service, when will it come back still bricked I will try it
Ok, I will get my phone back UNFIXED because they told me at the service that i have to pay for changing the firmware because my phone comes from other country.. I disagreed and told them to send my phone back.
I had an idea how to fix my phone and also some questions about that.
First, is there any way to full wipe my phone without recovery, I mean that i can;t access recovery on my bricked phone and i think that causes the problem with flashing any rom with odin (that the brokem rom i still installed and odin can' flash the new one over it). When I'll wipe the phone completely i suppose it might solve the problem. But does wiping the phone makes the phone unrecognizable for PC?
The second idea is kinda connected with the first one. I thought about flashing cf root with odin into my phone and as far as i know, it has its own recovery so i can easily wipe the phone with it and then flash the stock rom.
I know that my reply looks kinda messy but I hope you know what i mean.
First, is there any way to full wipe my phone without recovery, I mean that i can;t access recovery on my bricked phone and i think that causes the problem with flashing any rom with odin (that the brokem rom i still installed and odin can' flash the new one over it). When I'll wipe the phone completely i suppose it might solve the problem. But does wiping the phone makes the phone unrecognizable for PC?
Click to expand...
Click to collapse
Bump, need an answer to this.
up
Ok my phone is finally alive :cyclops: Here's the solution i figured out:
I downloaded different roms and different ver. of android
Tried to flash several times with pit file and without but it was still stuck at system.img
I tried different ports and the result was the same
I changed the cable and reinstalled drivers and I succeed to flash 4.0.4 ver without pit file with odin 3.07
I will add it to the first post for those who have the same problem, cheers :good:
Hi,
My friend has been using his Galaxy s2 for over quite some time and suddenly it froze during the bootscreen. It has been a clean version without anything warrenty-voiding stuff on it...
He asked me to look it up and i managed to get the phone into Download mode (Recovery mode wasn't working)
First time i tried to flash everyting over again on my Windows with Odin without using PIT files, after that i went into Ubuntu and still no luck..
At last i went back to Odin, flashing with PITfiles. When i tried this my PC froze and after a few hours i decided to reboot my phone. When i tried to get it back into download mode i just got a blank screen. no Download mode, no Recovery mode and so on. Even when i plug my phone into the wallcharger nothing happens.
Is there anything i still can try to get his phone up and running again?
Thanks in advance!
Oduivestein said:
Hi,
My friend has been using his Galaxy s2 for over quite some time and suddenly it froze during the bootscreen. It has been a clean version without anything warrenty-voiding stuff on it...
He asked me to look it up and i managed to get the phone into Download mode (Recovery mode wasn't working)
First time i tried to flash everyting over again on my Windows with Odin without using PIT files, after that i went into Ubuntu and still no luck..
At last i went back to Odin, flashing with PITfiles. When i tried this my PC froze and after a few hours i decided to reboot my phone. When i tried to get it back into download mode i just got a blank screen. no Download mode, no Recovery mode and so on. Even when i plug my phone into the wallcharger nothing happens.
Is there anything i still can try to get his phone up and running again?
Thanks in advance!
Click to expand...
Click to collapse
Did you tick repartition phone when you were flashing the pit files? Are you trying to use stock rom or custom rom? Stock rom requires the system size to be at defaults so make sure to flash a stock size pit. Otherwise, make sure you factory reset and wipe cache partition if you are trying to flash custom rom.
gsstudios said:
Did you tick repartition phone when you were flashing the pit files? Are you trying to use stock rom or custom rom? Stock rom requires the system size to be at defaults so make sure to flash a stock size pit. Otherwise, make sure you factory reset and wipe cache partition if you are trying to flash custom rom.
Click to expand...
Click to collapse
It was a stock rom i used with the stock pit.
The problem is i couldn't (and still cant) get into recovery mode. I could (not anymore) get into Download mode.
Do you have other thoughts?
Oduivestein said:
It was a stock rom i used with the stock pit.
The problem is i couldn't (and still cant) get into recovery mode. I could (not anymore) get into Download mode.
Do you have other thoughts?
Click to expand...
Click to collapse
Have you tried a USB jig? See if your phone reacts too it. Since you can't get to download mode, you hard bricked your phone (assume your chsrging port is still ok). Were you running ics or JB?
gsstudios said:
Have you tried a USB jig? See if your phone reacts too it. Since you can't get to download mode, you hard bricked your phone (assume your chsrging port is still ok). Were you running ics or JB?
Click to expand...
Click to collapse
It was running on ICS, I will try the USB jig ASAP and i will get back to ya!
Thanks for now
Still not working..
Trying an USB jig didnt put the phone into download mode. I bought one online and also tested it on my phone. It did work on mine but doesnt on the bricked S2. Is there also something else I can try now?
Regards,
Orlando
I had exactly the same problem. The phone had to be JTAG restored. This process isn't for the feint of heart to say the least.
Google "JTAG i9100" and watch some Youtube vids.
Hi
I can't possibly state how foolish I feel right now, but I accidently flashed my Samsung Galaxy S2 I-9100 with a Custom ROM made for the I-9100G version. As a result my phone is now only able to reach the Download mode; not even recovery mode. However on connecting with Odin the test is repeatedly FAILED. I am now left with a stuck phone which when tried to be powered up is always stuck in an incomplete boot cycle. Do we have any suggestions / ways to get this corrected, or do I have to order a new phone!??
Please help...
Thanks!
narayanan.n010 said:
Hi
I can't possibly state how foolish I feel right now, but I accidently flashed my Samsung Galaxy S2 I-9100 with a Custom ROM made for the I-9100G version. As a result my phone is now only able to reach the Download mode; not even recovery mode. However on connecting with Odin the test is repeatedly FAILED. I am now left with a stuck phone which when tried to be powered up is always stuck in an incomplete boot cycle. Do we have any suggestions / ways to get this corrected, or do I have to order a new phone!??
Please help...
Thanks!
Click to expand...
Click to collapse
Have you tried re-partitioning your phone yet with ODIN?
gsstudios said:
Have you tried re-partitioning your phone yet with ODIN?
Click to expand...
Click to collapse
Not yet. I may actually be a perfect example of one who should NOT try rooting..complete newbie in this world!!
In case you have any suggestions how to go about doing that please do share the same.
I took a backup of the stock ROM using Nandroid and had TWRM installed.
Of course, these are of no use until I'm at least able to reach the recovery mode!!
Have a look at my guide here on how to use the pit files: http://forum.xda-developers.com/gal...ivatives/mod-increase-partition-size-t3011162
Download the stock pit file
Download the official stock firmware
Flash both in ODIN (tick repartition and make sure you have selected the pit file and the stock rom to flash)
Start the flashing process
Hi I have one samsung Galaxy S3 which is stuck on Boot Screen. I tried to flash it but odin shows fail. I tried pit file same. Is there any way to fix it. I have Z3X also with me
@arjun_anil, in the worst case your internal memory is gone. So before threwing away, try firmware again: download your firmware, drivers, Odin from sammobile.com and follow exactly instructions, given there. If Odin finishs with failed again, post the log.
I tried to flash efs file and this is what I got
This is what I got from odin flashing efs file
Boot screen huh? Sounds like is missing/corrupted is files. Have you tried recovery an factory wipe? Also if you can connect to Odin, then you could reflash. But first your gunna need to know a few things about this brick here. Like the android version, carrier, an kernel version. So you can download an flash the proper files. I'm guessing your on a Verizon phone and or you didn't install Samsung drivers to help Odin's successful flashing chances. If you don't know your phones info, you can find out in recovery an Odin modes on the phone if accessible.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app