Install PhilZ Touch Recovery on 816g mt6592 by SP_Flash_Tool
Step 1: Download and extract files in PC
Step 2: Open SP flash tool (same version which was used to flash ROM). Click Scatter-loading button
Step 3: Now click Download button in sp flash tool
Step 4: Switch off phone and Connect your phone to PC via USB cable.
Step 5: Flashing will take few seconds to complete. You’ll see Download OK message on successful flashing.
Step 6: Remove the usb cable and press the power phone with volume down
Link for recoveryhttps://mega.nz/#!Y0QBWaYQ!aExnIWcsQs5FF9_mryECaKRD66U0uMCR8NLM26to-kU
upload it somewhere else please. i cant get mega
Can you make a recovery flashable zip? Or .img file that can be flashed from existing twrp?
thank u for this recovery,flashed ,every thing seems very good
i didnt use it yet for flashing ROM
is it safe ?
htc_a5mgp_dug
عملت باك اب من الريكفري للطوارئ
شكرا جزيلا اخي العزيز
Related
This is the method I discovered to root and install Custom ROMs on my Micromax A34..
I hope this will help you well...
There are 3 steps for your destination to root and install Custom ROMs on your Micromax A34..
Step 1> Root Your Model..
Step 2> Flash/Install Custom Recovery module for your Model..
Step 3> Flash/Install Custom ROM for your Model....
I am discussing all of these steps by this post here.. Please read carefully...
Step 1>>>> ( To Root Your Android Phone ) ( Any Android Phone is Supported For ROOT by this Method )
Components: A PC, Your Android phone, Your Original Data Cable, RootMaster.exe, Moborobo PC Suite..
A. Firstly Install Moborobo PC Suite from Here and install...(Download MOBOROBO PC SUITE
B. Then install Rootmaster from link given on file attached.. (Download ROOTMASTER from link given on file attached..)
C. Now connect your Android Mobile by Data Cable and make sure that Debugging mode is turned on from your handset..
( Debugging mode can be turned on from your mobile from Settings>Development or Settings>Applications>Development )
D. Make sure that your model is now detected by Moborobo PC Suite..
E. Now click on root button on Rootmaster (Make sure that your Model is now detected on Root Master )
F. That's all.. Your Phone is Now Rebooted..
YOUR PHONE IS NOW ROOTED AND YOU CAN CHECK YOUR PHONES ROOT STATUS FROM ROOT CHECKER APPLICATION...(Download ROOT CHECKER Apk here)
Step 2>>>> ( To Flash Custom Recovery Module on Your Phone (Micromax A34 only) )
Components: Mobile Uncle Tools, Recovery Module..
A. Firstly install Mobile Uncle Tools on your phone..(Download Mobile Uncle Tools By links on file attached below )
B. Then place the Recovery file on your sdcard.. (Download Recovery Module By links on file attached below )
(Don't place it in any subfolder. Otherwise it will not be detected)
C. Now open Mobile Uncle Tools and click on Recovery Update and then click on the file you havre loaded to your sdcard i.e recovery.img file..
D. Your phone is now restarted. and a white screen is displayed.. Dont afraid.. Your phone's Recovery is now replaced with Custom recovery Module..
E. Your phone will be auto Restarted..
( Recovery Module is now replaced )
Step 3>>>> ( To Flash/Install Custom ROM for your Model (Micromax A34) )
Components: Custom/Official ROM specially designed for your phone..
A. Download Custom ROM zip file from any source and place it on your sdcard.. Don't try to extract this zip file.. ( One Custom ROM for MICROMAX A34 is given here) (Download Now)
B. Open Mobile Uncle Tools on your phone..
C. Click on Update tool. And choose your flash file or Custom ROM downloaded from any source.. And click on next..
D. You can find that your phone's Software is changed to your new Custom ROM based software..
Links File:View attachment Links.txt
ENJOY>>>>>>>
IDEA GENERATED BY SKR
after flashing recovery via mbl uncl tools . my recovery is showing a white blank after doing so many reboots also
michel¥¥ said:
after flashing recovery via mbl uncl tools . my recovery is showing a white blank after doing so many reboots also
Click to expand...
Click to collapse
Yes. Thats happens to me also. Dont worry. Your recovery is working fine.
Do flash your custom rom with mobile uncle tool app. The link to download apk is available on links.txt file given with the post. Install that tool and try to flash rom by that.
I tried to install custom rom on my phone. Flashed wrong recovery, after changed to working recovery (which i had previously) phone didnt detect sim cards. I think it was because of system so thats why need system.img. And boot.img because read somewhere to flash boot.img using fastboot, so flashed and phone have bootloop now. Thank you from the mountain. So I think if i flash boot.img and system.img with fastboot it will work fine again.
EDIT: Found stock rom at russian forums gsmforums.ru and 4PDA forum
Phone working but I still have problem that it can't read SIM cards. It's dual sim and both sim cards don't working tried with some other cards and don't work too. Someone have any idea? It's wrong recovery flash problem? :/ Because phone can't read cards since i flashed wrong recovery and returned to working one. Thanks, hope for fast reply.
Help
I have found the ROM but it would be helpful if you could link it too. I haven't flashed android before and don't know how to do it properly, so it would be of great help if you could tell me how you did it. I have tried few things but with no success.
MM3100 said:
I have found the ROM but it would be helpful if you could link it too. I haven't flashed android before and don't know how to do it properly, so it would be of great help if you could tell me how you did it. I have tried few things but with no success.
Click to expand...
Click to collapse
Sorry for the really late reply, but I've bought 3 new phones already in the meantime so I stopped watching the forum for the solution. Here's the link for the stock rom: https://cloud.mail.ru/public/d126368659a8/KK_4.4.2_stock_ Prestigio 3404 Duos.7z You should be able to download it without any problems. If You encounter some problems then tell me in next reply and I'll upload the rom to the other hosting site. Next thing You should download is a file from this link: https://cloud.mail.ru/public/c1e9138eac6e/backup.7z It contains scatter file which includes required info for SP Flash Tool to flash the image. Extract both files to the same folder on Your desktop so it'll be easier to find them. To flash the rom You have to download and install SP Flash Tool. It would be best if You'd follow the tutorial on YouTube like this one: https://www.youtube.com/watch?v=5CxDF2pkdCQ Here's the link to SP Flash Tool official site: https://spflashtool.com/ In the flashtool You should select download agent which is inside the tool folder and is most likely named something like "MTKallinoneDL". Then You should select scatter file from the rom folder which is named something like "mt6752_android_scatter" The next step is to select the "download only" option from the menu. You should follow the video on how to install the drivers and what steps You should take to connect the device correctly to the pc. So once again:
1. Download all the files and extract them:
* https://cloud.mail.ru/public/d126368659a8/KK_4.4.2_stock_ Prestigio 3404 Duos.7z << stock rom
* https://cloud.mail.ru/public/c1e9138eac6e/backup.7z <<scatter file etc.
* https://androidfilehost.com/?fid=24269982087012126 <<mtk preloader drivers
* https://spflashtool.com/download/SP_Flash_Tool_v5.1824_Win.zip << Latest version of SP Flash Tool
2.Install the MTK preloader drivers as shown in the video: https://www.youtube.com/watch?time_continue=219&v=sADkzyI8Z5Q
3.Open SP Flash tool and select download agent, scatter file and select "download only" option from the drop down menu. (NOTE: You should open SP Flash Tool as administrator to avoid any problems)
4.Select checkboxes for ANDROID, BOOTIMG, RECOVERY.
5.Click the downlaod button (before connecting Your phone)
6.Connect Your phone without battery to Your pc.
7.Now wait untill the message window pop-ups with "download OK" message.
If You have trouble using the SP Flash Tool here's another video: https://www.youtube.com/watch?v=OKpt0TLE6_A NOTE: If You flash Your phone with "FORMAT ALL AND DOWNLOAD" You could erase Your IMEI partition which will result in another problems with phone calls etc. It's best if You select download only and select only these 3 partitions I mentioned earlier. If You encounter any problems please let me know in Your future reply.
If you guys are planning to update your recovery to twrp or any other recovery after flashing your stock rom on your device .....Then insteaad of going to through the long way that is
1.Rooting ur device
2.Downloading mobile uncle mtk tools
3.Downloading Recovery img and placing it in Root Directory
4.Flashing img file with the app
Above Step will take quite a time So instead Of doing these things what u can do is ....
At the time of flashing Stock Rom on your device by YGDP tool .....When you reach the "Entering Download Mode" Step.... Perform These steps:-
1.Download TWRP or Whichever recovery img file u wanna flash on ur device
2.Go to YGDP tool Directory that will be C:\YLXZGJ\YGDP
3.you Will Find Down Files folder in it.... open it....U will thrn find a folder with your device name .... open that
4. In that folder u will find a recovery img file already there which is the original recovery provided with the stock rom which u probabely dont want to flash on ur device
5. Replace this file with the recovery file which u downloaded which u wanna flash
6.Then Follow the normal Flashing Procedure
For Video Explaining Above Steps Go To :- https://www.youtube.com/watch?v=fz3FcN2mvcs
For Video Showing How to flash Stock Rom with actual flashing Go To:- https://www.youtube.com/watch?v=HoR5rqEMj1M&list=PLYXSfprHMN9rHR0yF8UAlJ3dPfM6ARXDG&index=1
I have rooted my Micromax canvas 2.2 A114 through frama root and granted access to Root Browser thorugh Supersu. Later through root browser, i was allowing all privileges, including special privileges to ROOT folder. Just after pressing OK, phone got hanged and after reinserting battery also, it is not booting. I tried factory and cache reset through recovery mode too. What shall I do to correct it?
nkjain87 said:
I have rooted my Micromax canvas 2.2 A114 through frama root and granted access to Root Browser thorugh Supersu. Later through root browser, i was allowing all privileges, including special privileges to ROOT folder. Just after pressing OK, phone got hanged and after reinserting battery also, it is not booting. I tried factory and cache reset through recovery mode too. What shall I do to correct it?
Click to expand...
Click to collapse
flash stock rom
And how to do that?
nkjain87 said:
And how to do that?
Click to expand...
Click to collapse
Follow the steps below:
[WARNING:I AM NOT RESPONSIBLE IF ANYTHING HAPPENS TO YOUR DEVICE. DO IT AT YOUR OWN RISK]
Download the following files
Stock firmware: http://www.mediafire.com/?qsbuu265jfhf7b1
Sp flash tool: https://drive.google.com/file/d/0B8HspVLwTTxtVUJmcS1VMXVzaUk/view
Usb driver: https://drive.google.com/file/d/0B8HspVLwTTxtWWJsYnNJR2kxeEE/view
Step 1: Install drivers in your PC
Step 2: Extract the Stock ROM folder where you want
Step 3: Extract and open the SP Tool. Sptool.exe Run as Administrator
Step 4: Click on Scatter-Loading option.
Step 5: SpTool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt” which is our scatter file.
Step 6: Now click on Download.
Step 7: Connect your switch off phone with PC via USB cable (Make sure your phone is switched off).
Step 8: SP Tool detect your phone and process will start.
Step 9: Now start downloading Stock Rom in your phone by flashing
Unplug your device after downloading is complete
Done
Regards milkyway3
Hi ,everyone ,
I'm sharing this recovery , ported by Syed Ahmed Ali Shah (All credits to him)
How to install:
Download Spflashtool and recovery zip file
Extract the zip file , you will find the recovery.img + scatter file
Open Spflashtool , and load that scatter file.
The recovery should appears now (in spflashtool , it is supposed to be chacked/selected)
Choose download only and press on download button
Turn of your device ,and plug it in
wait till the succes mark appears
unplug you're device and boot directly to recovery
the recovery will ask you t allow system modification , don't allow for now ...because this will brick (not really,it will stops at logo, can be fixed by rooting it) you're device..
Rooting the device :
Now that you have the recovery ,Download supersu.zip file and flash it with that recovery...
Backup your firmware before rooting/ allowing modification
I'm not responsible for any damage that could happen , do it at your own risk
Hello I have succeeded to boot to TWRP recovery tool but i don't see the buttons
I see only ReadOnly, Language
and also Give permission modification
and I am afraid to brick my new Allure A55 Slim
For updated rom
This method is suitable for marshmallow OTA updated? Because it is impossible to make a backup of rom/data in the MTK Droid tool, as well as generate a scatter file.
Done. TWRP has been flashed, then rooted. The current scatter file can be generated from a ROM backup created by SPFlashTool, using the WwR_MTK software. And also cuting the ROM to img files for flashing, look at 4pda.ru, really powerful combine.
Works for Blu Vivo 5 mini??
d3n1ls0n said:
Works for Blu Vivo 5 mini??
Click to expand...
Click to collapse
If you can make a backup and know how to use the recovery tools, then you can try. But I recommend trying a safer way first. With the Kingoroot application or AutoRoot Tools on this link https://qitapso.com/how-to-install-twrp-custom-recovery-on-blu-vivo-5-mini/ (works on Lollipop)