I have rooted my Micromax canvas 2.2 A114 through frama root and granted access to Root Browser thorugh Supersu. Later through root browser, i was allowing all privileges, including special privileges to ROOT folder. Just after pressing OK, phone got hanged and after reinserting battery also, it is not booting. I tried factory and cache reset through recovery mode too. What shall I do to correct it?
nkjain87 said:
I have rooted my Micromax canvas 2.2 A114 through frama root and granted access to Root Browser thorugh Supersu. Later through root browser, i was allowing all privileges, including special privileges to ROOT folder. Just after pressing OK, phone got hanged and after reinserting battery also, it is not booting. I tried factory and cache reset through recovery mode too. What shall I do to correct it?
Click to expand...
Click to collapse
flash stock rom
And how to do that?
nkjain87 said:
And how to do that?
Click to expand...
Click to collapse
Follow the steps below:
[WARNING:I AM NOT RESPONSIBLE IF ANYTHING HAPPENS TO YOUR DEVICE. DO IT AT YOUR OWN RISK]
Download the following files
Stock firmware: http://www.mediafire.com/?qsbuu265jfhf7b1
Sp flash tool: https://drive.google.com/file/d/0B8HspVLwTTxtVUJmcS1VMXVzaUk/view
Usb driver: https://drive.google.com/file/d/0B8HspVLwTTxtWWJsYnNJR2kxeEE/view
Step 1: Install drivers in your PC
Step 2: Extract the Stock ROM folder where you want
Step 3: Extract and open the SP Tool. Sptool.exe Run as Administrator
Step 4: Click on Scatter-Loading option.
Step 5: SpTool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt” which is our scatter file.
Step 6: Now click on Download.
Step 7: Connect your switch off phone with PC via USB cable (Make sure your phone is switched off).
Step 8: SP Tool detect your phone and process will start.
Step 9: Now start downloading Stock Rom in your phone by flashing
Unplug your device after downloading is complete
Done
Regards milkyway3
Related
how can i root my lava n320
it works on gingerbird 2.3.6
my kernel version is 2.6.35.7 {[email protected]}
my gcc version is 4.4.3
my uboot version is 2010.06
my bb chip version is mt6575
please help me ..........so that i'm able to root my phone...
Rooting is possible in LAVA IRIS N350
shael1435 said:
how can i root my lava n320
it works on gingerbird 2.3.6
my kernel version is 2.6.35.7 {[email protected]}
my gcc version is 4.4.3
my uboot version is 2010.06
my bb chip version is mt6575
please help me ..........so that i'm able to root my phone...
Click to expand...
Click to collapse
Hello Guys,
I've root access to my LAVA Iris N350.
The only Possible way to get root is by Downloading the Flash files.
I'll upload the Complete Process with the ROM Files Soon:angel:.
getmesar said:
Hello Guys,
I've root access to my LAVA Iris N350.
The only Possible way to get root is by Downloading the Flash files.
I'll upload the Complete Process with the ROM Files Soon:angel:.
Click to expand...
Click to collapse
do it fast please
Pls Speedly Update ..,I need it
Root LAVA IRIS N350 with SP Flash tool and Droid Root and tool.
NOTE: This can BRICK your Phone. I'm not responsible for any damage. Stop immediately if you aren't familiar with Flash files, ROM's etc.
I've successfully got access to the root of LAVA Irirs N350.
Tools Needed:
1. MTKDroid root and Tools
2. SP_Flash_Tool_v3.1224.01
Drivers Needed :MediaTek-1.1123.0
Let's Start:
Step 1. Make a Scatter File:
Open MTK Droid Tool and Click on Block Maps..this will pop a new Window containing some Memory address. Simply Click on "Create Scatter File" and save the file.
Step 2. Prepare SP Flash tool:
Open SP Flash Tool and Click over "Scatter Loading" and select the File which we have create din step 1. Click on Readback tab.
Step 3.Preapare ROM:
Click on the button ADD. Double click on the line and save the ROM.
#Things To notice: The filename Will be like "ROM_#". in your case probably it'll be ROM_0.
#Remember the path of the File. U'll use this file later.
Alfter Clicking Save a new Window will appear named as "Read Back Block Start Address"
Windows Settings Will be as below
Type: Hex
Read Method:Read Page Only
Start Address: 0x0000000000000000
Length:0x12BA0000
Step 4. Readback ROM:
Click on Read Back button and connect the switched-off phone to PC.
Follow these Steps Carefully.Once Rom is Created you can use it in future.On success you'll see a BIG GREEN CIRCLE embded in a message box.
Step 5. Prepare files for FlashTool and make CWM:
Open the MTK Droid Root & Tools window which we left on 1st step.it is necessary to turn on phone and to connect it to the program. Click on To process file ROM_ from FlashTool button and choose the ROM_* file saved earlier. At successful unpacking rom it will be offered to choose CWM from similar phone. Chosen CWM it is checked on compliance to the connected phone and if ok, the CWM is created.
MOTE: A new scatter file and other neccessary files are created in the backup folder in droid root & trool program's directory.you'll need the files in the next step.
Starting with v2.4.0 CWM it is made automatically and the file from similar phone shouldn't be looked for any more!
Step 6. Download new CWM to the phone:
Start FlashTool, choose scatter in the folder created on the previous step. Remove marks from all blocks! Click on RECOVERY and we choose the file CWM in the same folder which was created on the previous step. Click Download and connect a cable to PC (phone has to be switched off) and expect the end of process.
DANGEROUS! On this step the CWM recovery block has to be marked only! Also it is necessary to use only the Download button and not to use at all the Firmware Upgrade button!
Summary of step 6:
--> Click on Scatter-loading.Select Scatter file from the backup folder.
--> Make Sure all the checkboxes are unchecked. Only the Checkbox labled as Recovery should be Checked.
--> Click Exactly over Recovery.
--> It will ask you to select a file. Now select a Recovery file created in step 6. Tt must be inside backup folder named as "Recovery_###.img"
--> Click Button Download.
--> Connect SWITCHED OFF phone.
Message bog with a green circle shown? it means all done.Exit.
Step 7. Install Superuser.
Load phone in CWM mode, connect to MTK Droid Root & Tools, go on the tab root, backup, recovery and, pressing on this tab the necessary buttons, we do:
- install superuser (often mean "get root" under it)
You have a Rooted LAVA N350. :good:
Once Again: I'm not responsible for the any damage. Do it at your own risk.
friend ,
when I started mkt tool ,on right side message box promte that un-identify rom i.e rom cannot be create.
avoiding this i'm proceed to next step.
step 4 is not successfully done i.e it not proceeding.
now what i have to do? please help.
i rooted my lava iris n320 with this method thanks for this @getmesar nice of you to share this !
EDIT: I MADE A HQ THREAD HERE CHECK IT OUT
http://forum.xda-developers.com/showthread.php?p=45401999
install cm in lava n320
please solve my problem
I have root my lava n320 but I was not install cm in my device there is any easy way to install cm or how to install jellybean in my lava n320 please help me bro
Khan Noorullah said:
please solve my problem
I have root my lava n320 but I was not install cm in my device there is any easy way to install cm or how to install jellybean in my lava n320 please help me bro
Click to expand...
Click to collapse
Sorry! But you cannot install Jellybean on Lava N320.
Memory Offset not supported by MTK Chip.
Ok I am posting a simple tutorial to Root your Canvas HD and flash Custom Recovery without using SP Flash Tool. Sometimes it is very difficult for newbies to get proper driver and correct version of SP flash tool. Some users scared to use SP Flash Tool. So here is the solution.
Requirements:
1. Canvas HD of course
2. Framaroot application
3. Root Checker to check if your device is Rooted or not.
4. CWM v6.0.3.3 OR CWM v6.0.3.0 OR TWRP v2.5.0.0 or TWRP v2.6.3.0 or CWM v6.0.4.0 (Touch Based) or CWM v6.0.4.0
5. MobileUncle MTK Tools v2.9.8
Procedure:
1. Download the Framaroot application form the above link and transfer it to SD card
2. Now go to Settings>Security and put check mark on Unknown Soruces
3. Now use file manager and browse to the location where you have placed Framaroot Application
4. Install it and open it. Now Select "Install SuperSU" and hit Boromir.
5. Now go to Play Store and search for Super User and install it after opening it might ask to update SU.bin, hit yes and then "Normal"
6. Reboot your Device.
7. Check with Root Checker, if your device is rooted or not.
8. If it is rooted, download MobileUncle and install it, remember it require root access to work properly.
9. Now download any custom Recovery i.e. CWM or TWRP from the above link and rename it to recovery.img and place it in the root of SD card.
10. Now open MobileUncle and tap on Update Recovery it will automatically search the img file, you just have to select and confirm it. Then it will ask to boot your device into custom recovery tap on yes.
11. Your device would be booted into custom recovery.
Congrats your device is now rooted and flashed with Custom Recovery, now you can flash any custom ROM and now you have full control over your device.
How to Full Unroot and flash stock Recovery:
1. Download this stock Recovery file.
2. Rename the file to Recovery.img and place it in the root of SD Card.
3. Now open MobileUncle and tap on Recovery Update, it will search the file by itself, you just have to select the file and confirm.
4. It will then ask whether you want to boot into recovery, if you want to confirm you can tap on yes otherwise its not required.
5. Now open SuperSU and go to settings, scroll down to Full Unroot and tap on it. The process would be finished within 1 or 2 secs now you are on Stock v4.2.1 that too unrooted.
Now your warranty is intact you can go to service center for any help from them
Very Important: I am just trying to help you guys, I am not responsible for anything that might go wrong, follow this tutorial at your own risk.
this method works for sure ...right???
coz i have a friend who wants to root his new HD and we are on a trip with no computers....So....
it's working right...
adi_sat123 said:
this method works for sure ...right???
coz i have a friend who wants to root his new HD and we are on a trip with no computers....So....
it's working right...
Click to expand...
Click to collapse
I have first tried it then I have posted this tutorial, you can try it by yourself.
Works 100% for me on my Mobistel Cynus T5..Thanks...
working like a champ thanks:good:
nice_guy75 said:
Ok I am posting a simple tutorial to Root your Canvas HD and flash Custom Recovery without using SP Flash Tool. Sometimes it is very difficult for newbies to get proper driver and correct version of SP flash tool. Some users scared to use SP Flash Tool. So here is the solution.
Requirements:
1. Canvas HD of course
2. Framaroot application
3. Root Checker to check if your device is Rooted or not.
4. CWM v6.0.3.3 OR CWM v6.0.3.0 OR TWRP v2.5.0.0
5. MobileUncle MTK Tools v2.9.3
Procedure:
1. Download the Framaroot application form the above link and transfer it to SD card
2. Now go to Settings>Security and put check mark on Unknown Soruces
3. Now use file manager and browse to the location where you have placed Framaroot Application
4. Install it and open it. Now Select "Install SuperSU" and hit Boromir.
5. Reboot your Device.
5. Check with Root Checker, if your device is rooted or not.
6. If it is rooted, download MobileUncle and install it, remember it require root access to work properly.
7. Now download any custom Recovery i.e. CWM or TWRP from the above link and rename it to recovery.img and place it in the root of SD card.
8. Now open MobileUncle and tap on Update Recovery it will automatically search the img file, you just have to select and confirm it. Then it will ask to boot your device into custom recovery tap on yes.
9. Your device would be booted into custom recovery.
Congrats your device is now rooted and flashed with Custom Recovery, now you can flash any custom ROM and now you have full control over your device.
How to Full Unroot and flash stock Recovery:
1. Download this stock Recovery file.
2. Rename the file to Recovery.img and place it in the root of SD Card.
3. Now open MobileUncle and tap on Recovery Update, it will search the file by itself, you just have to select the file and confirm.
4. It will then ask whether you want to boot into recovery, if you want to confirm you can tap on yes otherwise its not required.
5. Now open SuperSU and go to settings, scroll down to Full Unroot and tap on it. The process would be finished within 1 or 2 secs now you are on Stock v4.2.1 that too unrooted.
Now your warranty is intact you can go to service center for any help from them
Note: It will install SuperSU v1.34 but v1.51 is also released, so you can upgrade your SuperSU by flashing the zip via custom recovery.
Very Important: I am just trying to help you guys, I am not responsible for anything that might go wrong, follow this tutorial at your own risk.
Click to expand...
Click to collapse
Will this trick work on Canvas 2 too..??
Thank you.....
It works!!!!
Thank you OP....
abhishekjain.ims said:
Will this trick work on Canvas 2 too..??
Click to expand...
Click to collapse
I don't have Canvas 2 so I cant tell you. Frameroot should work on Canvas 2 as well but not sure about recovery.img.
nice_guy75 said:
I don't have Canvas 2 so I cant tell you. Frameroot should work on Canvas 2 as well but not sure about recovery.img.
Click to expand...
Click to collapse
Ok...it did..1 of my friend successfully completed this trick..thanks :victory:
niceaf5 said:
I have first tried it then I have posted this tutorial, you can try it by yourself.
Click to expand...
Click to collapse
What to do after 9th step....after selectng image nd confirming it...phone goes into
Recovero...blak screeb appears with some points written on it...
Thn it will reboot automatically or i hav to manually select reeboot optiob by pressing volume keys nd thn pressing power button fr trbooting....m i right ...??
Sunny37886 said:
What to do after 9th step....after selectng image nd confirming it...phone goes into
Recovero...blak screeb appears with some points written on it...
Thn it will reboot automatically or i hav to manually select reeboot optiob by pressing volume keys nd thn pressing power button fr trbooting....m i right ...??
Click to expand...
Click to collapse
Tell me what points are written on it?
nice_guy75 said:
Tell me what points are written on it?
Click to expand...
Click to collapse
5-6 point..dont remembr properly..i selected reboot
1st was reeboot
Advanced
Cache_______
Prtition
Dnt remembr properly...
Btw Root checkr shows device rooted..
Sunny37886 said:
5-6 point..dont remembr properly..i selected reboot
1st was reeboot
Advanced
Cache_______
Prtition
Dnt remembr properly...
Btw Root checkr shows device rooted..
Click to expand...
Click to collapse
Ok, got it you are rooted and flashed with CWM.
cam is not working
My front cam is not working...
Shows a white screen..
I am having hard time unrooting my phone..
I guess i need to contact service center but i need to unroot it first as the cams were working fine before root..
Pls help.
sunny041 said:
My front cam is not working...
Shows a white screen..
I am having hard time unrooting my phone..
I guess i need to contact service center but i need to unroot it first as the cams were working fine before root..
Pls help.
Click to expand...
Click to collapse
Everything is explained in the tutorial then also you are unable to unroot?
nice_guy75 said:
Everything is explained in the tutorial then also you are unable to unroot?
Click to expand...
Click to collapse
I did it...
But the phone is not looking the way i should be means all the changes i hade done in the phone are still there and version is 4.1.2 only..
sunny041 said:
I did it...
But the phone is not looking the way i should be means all the changes i hade done in the phone are still there and version is 4.1.2 only..
Click to expand...
Click to collapse
What kind of changes are you talking about? If you are talking about the changes which you have made through Gravity Box and other modules of Xposed framework then you should just uninstall the Xposed Framework.
nice_guy75 said:
What kind of changes are you talking about? If you are talking about the changes which you have made through Gravity Box and other modules of Xposed framework then you should just uninstall the Xposed Framework.
Click to expand...
Click to collapse
Ty buddy...
It looks like before now....
Now pls tell me do i really need to take it to the service center or there is some way to fix the camera problem...
No bugs works like a charm finished rooting and installing cwm in 5 Minutes amazing!!
Sent from my Micromax A116 using xda premium
sunny041 said:
Ty buddy...
It looks like before now....
Now pls tell me do i really need to take it to the service center or there is some way to fix the camera problem...
Click to expand...
Click to collapse
I would suggest you to go to Service centre only.
please some one help me root my xolo a510s. dont recommend frmaroot i have tried its not working on my firmware..... please help me root this phone
Rooting Xolo A510S
The method is very simple and you will have your phone rooted within no time, if you follow my instructions closely.
This method involves the use of a tool called, “Cydia Impactor”. (Yes, it is developed Jay Saurik, the brains behind Cydia).
Before we begin, make sure you have installed all the drivers for your phone.
Step 1 : Connect your XOLO A510S to your pc using the USB cable.
Step 2 : Enable USB Debugging on your XOLO A510S.
Navigate to Settings > Developer Options.
Tick to enable USB debugging.
USB-Debugging-Stock
Step 3: Extract “Impactor_0.9.14.zip” to a suitable location.
Step 4: Execute “Impactor.exe”
SS1
Step 5: Click “Start”
Make sure the option “# drop SuperSU su to /system/xbin.su” is chosen.
SS2
The application will start the root process and there might be occasional prompts on your handset, allow the installation on your handset.
Step 6: Enjoy your rooted “XOLO A510S”.
P. S. Always remember if you are asked to update the su binary when running the SuperSu app. Always choose the normal installation and not the CWM/TWRP recovery method. It will break your root and no method will be able to give your root back. You will have to flash your complete firmware again and start over.
swanav said:
The method is very simple and you will have your phone rooted within no time, if you follow my instructions closely.
This method involves the use of a tool called, “Cydia Impactor”. (Yes, it is developed Jay Saurik, the brains behind Cydia).
Before we begin, make sure you have installed all the drivers for your phone.
Step 1 : Connect your XOLO A510S to your pc using the USB cable.
Step 2 : Enable USB Debugging on your XOLO A510S.
Navigate to Settings > Developer Options.
Tick to enable USB debugging.
USB-Debugging-Stock
Step 3: Extract “Impactor_0.9.14.zip” to a suitable location.
Step 4: Execute “Impactor.exe”
SS1
Step 5: Click “Start”
Make sure the option “# drop SuperSU su to /system/xbin.su” is chosen.
SS2
The application will start the root process and there might be occasional prompts on your handset, allow the installation on your handset.
Step 6: Enjoy your rooted “XOLO A510S”.
P. S. Always remember if you are asked to update the su binary when running the SuperSu app. Always choose the normal installation and not the CWM/TWRP recovery method. It will break your root and no method will be able to give your root back. You will have to flash your complete firmware again and start over.
Click to expand...
Click to collapse
sir i want custom recovery for xolo a510s please send any link or file
rao bharat said:
sir i want custom recovery for xolo a510s please send any link or file
Click to expand...
Click to collapse
Hey Rao,
You can use MTK Droid Root and Tools for installing a custom recovery on your Xolo A510S (CWM).
Here you go,
http:--depositfiles.com-files-ne1gnposp
replace the '-' with '/'
Thanks
swanav said:
Hey Rao,
You can use MTK Droid Root and Tools for installing a custom recovery on your Xolo A510S (CWM).
Here you go,
http:--depositfiles.com-files-ne1gnposp
replace the '-' with '/'
Thanks
Click to expand...
Click to collapse
you mean any cwm out there?
hey can u send me link
i need xolo a510s twrp or cwm recovery ..
please send me link if available..!!
thank you..!!
This is the method I discovered to root and install Custom ROMs on my Micromax A34..
I hope this will help you well...
There are 3 steps for your destination to root and install Custom ROMs on your Micromax A34..
Step 1> Root Your Model..
Step 2> Flash/Install Custom Recovery module for your Model..
Step 3> Flash/Install Custom ROM for your Model....
I am discussing all of these steps by this post here.. Please read carefully...
Step 1>>>> ( To Root Your Android Phone ) ( Any Android Phone is Supported For ROOT by this Method )
Components: A PC, Your Android phone, Your Original Data Cable, RootMaster.exe, Moborobo PC Suite..
A. Firstly Install Moborobo PC Suite from Here and install...(Download MOBOROBO PC SUITE
B. Then install Rootmaster from link given on file attached.. (Download ROOTMASTER from link given on file attached..)
C. Now connect your Android Mobile by Data Cable and make sure that Debugging mode is turned on from your handset..
( Debugging mode can be turned on from your mobile from Settings>Development or Settings>Applications>Development )
D. Make sure that your model is now detected by Moborobo PC Suite..
E. Now click on root button on Rootmaster (Make sure that your Model is now detected on Root Master )
F. That's all.. Your Phone is Now Rebooted..
YOUR PHONE IS NOW ROOTED AND YOU CAN CHECK YOUR PHONES ROOT STATUS FROM ROOT CHECKER APPLICATION...(Download ROOT CHECKER Apk here)
Step 2>>>> ( To Flash Custom Recovery Module on Your Phone (Micromax A34 only) )
Components: Mobile Uncle Tools, Recovery Module..
A. Firstly install Mobile Uncle Tools on your phone..(Download Mobile Uncle Tools By links on file attached below )
B. Then place the Recovery file on your sdcard.. (Download Recovery Module By links on file attached below )
(Don't place it in any subfolder. Otherwise it will not be detected)
C. Now open Mobile Uncle Tools and click on Recovery Update and then click on the file you havre loaded to your sdcard i.e recovery.img file..
D. Your phone is now restarted. and a white screen is displayed.. Dont afraid.. Your phone's Recovery is now replaced with Custom recovery Module..
E. Your phone will be auto Restarted..
( Recovery Module is now replaced )
Step 3>>>> ( To Flash/Install Custom ROM for your Model (Micromax A34) )
Components: Custom/Official ROM specially designed for your phone..
A. Download Custom ROM zip file from any source and place it on your sdcard.. Don't try to extract this zip file.. ( One Custom ROM for MICROMAX A34 is given here) (Download Now)
B. Open Mobile Uncle Tools on your phone..
C. Click on Update tool. And choose your flash file or Custom ROM downloaded from any source.. And click on next..
D. You can find that your phone's Software is changed to your new Custom ROM based software..
Links File:View attachment Links.txt
ENJOY>>>>>>>
IDEA GENERATED BY SKR
after flashing recovery via mbl uncl tools . my recovery is showing a white blank after doing so many reboots also
michel¥¥ said:
after flashing recovery via mbl uncl tools . my recovery is showing a white blank after doing so many reboots also
Click to expand...
Click to collapse
Yes. Thats happens to me also. Dont worry. Your recovery is working fine.
Do flash your custom rom with mobile uncle tool app. The link to download apk is available on links.txt file given with the post. Install that tool and try to flash rom by that.
DISCLAIMER : Rooting or flashing custom roms results breaking the warranty of the device. Me and Custom Roms authors are not responsible for any damage which is incurred in the process of flashing custom roms or rooting the device. We highly advice to take a backup of your device prior to performing the process.
For Installing Custom Rom In your Lenovo A6000/+ Follow This
*-------------------------------------*----------------------------------------------*
##Download Your Custome Rom And Compatiable GApps file Which You want to install in Your Mobile And Copy All in Your Sd Card.
##.Download This Zip File and extract it using 7zip or winrar:--> https://drive.google.com/open?id=0Bzk1MbGP5MepTklURFVzSm1ETzQ
###First You have to install custom recovery in your cell for installing Custom Rom ,for that
Install Custome Recovery in Lenovo A6000 / Plus:
---------------------------------------------------------------------
Step 1. Connect your Lenovo A6000/A6000+ to your PC by enabling USB Debugging mode from Developer options in Settings. If you cant find the developer options, Goto Settings> About Phone> Device Information. Tap 7 times on the Build Number. Now you can find the developers options in Settings.
Step 2. After connecting, Select USB Storage device (Open USB Storage).
Step 3. Extract the downloaded files. Copy SuperSU.zip from the zip file into your SDcard or Internal Storage.
Step 4. Now,
Click adb.exe
Click fastboot.exe
Then, Open command.bat from the extracted folder & type one by one all command.
1--> adb devices (Explain- it ll show you list of devices attached)
2-->adb reboot bootloader (Explain-The above command will boot your device into bootloader mode. As soon as you enter this command, you would see A Lenovo Logo with small text ,powerkey long press can reboot phone at the bottom of the screen.)
3-->fastboot flash recovery recovery.img (Explain-This would replace the stock recovery with TWRP Recovery.)
Step 5.Now switch off your device & remove the USB cable and Battery,after 5 seconds plug your battery in. Press & Hold VolumeUp+VolumeDown+ Power button simultaneously.
Step 6. You will see the Custome Recovery in your device
Step 7. Goto Backup. Select System, data, boot & swipe to confirm. It will start creating backup of your device. If in case anything goes wrong, you can restore this backup and can save your cell rather running through posts & asking for help.
Step 8. Goto Wipe>Advanced Wipe>Select Wipe cache, Wipe Dalvik cache, Format System, Wipe data. Swipe for Yes! It will take 10-30secs to wipe all the selected data.
Step 9. Now Go to Install, locate the downloaded ROM file & swipe to Install the ROM file. After the ROM flashing process gets completed again goto Install & Flash the GApps file.
Step 10. After everything is done, wipe cache & dalvik cache.(Optional)
Now Reboot your device.....
Step 11. That�s it! First boot might take 2-3 minutes. Dont worry! Setup your Google Account & restore all your apps.
Voila! You Have Successfully Installed Your Custom Rom And Enjoy.......
**To Root Lenovo A6000 / Plus:
--------------------------------------------
You Can Use Kingroot App - http://kingroot.en.uptodown.com/android
Or
Follow All The Guide Through Step 6 And Then
Step 1. Select Install zip from your Custome Recovery & locate the SuperSU.zip file you downloaded from above link.
Step 2. Swipe to confirm Installation of zip.
Step 3. Done! You have successfully rooted your Lenovo A6000 & A6000 Plus
Qualcomm Usb Drive For Lenovo A6000/+ : https://drive.google.com/file/d/0Bzk1MbGP5MepWFlmLTVlOG9DalE/view
If You Guys Finding Any Problem Please Comment Below
Please Press Thanks If I Helped It Will Encourage Me
my root will be lost on installling custom recovery on my phone??
without installing any custom roms..? @ShivaY
Sent from my Lenovo A6000 using XDA Labs
excellent
perfect explanation
please post a video and also updatepost with pics
Flashed the F2FS TWRP recovery using your guide. Thanks a lot bro.. Gonna flash RR 7.1 with GAPPS pico.