please some one help me root my xolo a510s. dont recommend frmaroot i have tried its not working on my firmware..... please help me root this phone
Rooting Xolo A510S
The method is very simple and you will have your phone rooted within no time, if you follow my instructions closely.
This method involves the use of a tool called, “Cydia Impactor”. (Yes, it is developed Jay Saurik, the brains behind Cydia).
Before we begin, make sure you have installed all the drivers for your phone.
Step 1 : Connect your XOLO A510S to your pc using the USB cable.
Step 2 : Enable USB Debugging on your XOLO A510S.
Navigate to Settings > Developer Options.
Tick to enable USB debugging.
USB-Debugging-Stock
Step 3: Extract “Impactor_0.9.14.zip” to a suitable location.
Step 4: Execute “Impactor.exe”
SS1
Step 5: Click “Start”
Make sure the option “# drop SuperSU su to /system/xbin.su” is chosen.
SS2
The application will start the root process and there might be occasional prompts on your handset, allow the installation on your handset.
Step 6: Enjoy your rooted “XOLO A510S”.
P. S. Always remember if you are asked to update the su binary when running the SuperSu app. Always choose the normal installation and not the CWM/TWRP recovery method. It will break your root and no method will be able to give your root back. You will have to flash your complete firmware again and start over.
swanav said:
The method is very simple and you will have your phone rooted within no time, if you follow my instructions closely.
This method involves the use of a tool called, “Cydia Impactor”. (Yes, it is developed Jay Saurik, the brains behind Cydia).
Before we begin, make sure you have installed all the drivers for your phone.
Step 1 : Connect your XOLO A510S to your pc using the USB cable.
Step 2 : Enable USB Debugging on your XOLO A510S.
Navigate to Settings > Developer Options.
Tick to enable USB debugging.
USB-Debugging-Stock
Step 3: Extract “Impactor_0.9.14.zip” to a suitable location.
Step 4: Execute “Impactor.exe”
SS1
Step 5: Click “Start”
Make sure the option “# drop SuperSU su to /system/xbin.su” is chosen.
SS2
The application will start the root process and there might be occasional prompts on your handset, allow the installation on your handset.
Step 6: Enjoy your rooted “XOLO A510S”.
P. S. Always remember if you are asked to update the su binary when running the SuperSu app. Always choose the normal installation and not the CWM/TWRP recovery method. It will break your root and no method will be able to give your root back. You will have to flash your complete firmware again and start over.
Click to expand...
Click to collapse
sir i want custom recovery for xolo a510s please send any link or file
rao bharat said:
sir i want custom recovery for xolo a510s please send any link or file
Click to expand...
Click to collapse
Hey Rao,
You can use MTK Droid Root and Tools for installing a custom recovery on your Xolo A510S (CWM).
Here you go,
http:--depositfiles.com-files-ne1gnposp
replace the '-' with '/'
Thanks
swanav said:
Hey Rao,
You can use MTK Droid Root and Tools for installing a custom recovery on your Xolo A510S (CWM).
Here you go,
http:--depositfiles.com-files-ne1gnposp
replace the '-' with '/'
Thanks
Click to expand...
Click to collapse
you mean any cwm out there?
hey can u send me link
i need xolo a510s twrp or cwm recovery ..
please send me link if available..!!
thank you..!!
Related
I have iBall Andi4.5h. Please let me know how to root the device in order to get more benefits.
vmgajera said:
I have iBall Andi4.5h. Please let me know how to root the device in order to get more benefits.
Click to expand...
Click to collapse
here is the link i just rooted my iball andi 4.5h
http://forum.xda-developers.com/showthread.php?t=1886460
hit thanks if it helped you.
i need i ball andi 4.5h usb drivers plz post the link
cannot boot into recovery mode
Today i bought iball andi 4.5h phone and tried to root it. I used a tutorial, where a Recovery- APP was used, where i simply had to choose the zipfile and it restarted on its own. Something must have gone wrong, because i cant boot into any kind of recovery (volume up Power).but my phone rooted successfully by using another tutorial.But my ultimate aim is to install clockwork mod recovery.please help
Shanipallikkara said:
Today i bought iball andi 4.5h phone and tried to root it. I used a tutorial, where a Recovery- APP was used, where i simply had to choose the zipfile and it restarted on its own. Something must have gone wrong, because i cant boot into any kind of recovery (volume up Power).but my phone rooted successfully by using another tutorial.But my ultimate aim is to install clockwork mod recovery.please help
Click to expand...
Click to collapse
hi i also own this mobile. can u explain me the exact procedure of rooting this device,,,
http://forum.xda-developers.com/showthread.php?t=1886460
1.) Download attached file from above link.
2.) Extract it
3.) Double click the RunMe.bat and follow instructions!
hit thanks if it helped you.
Help needed with andi driver..
matharuajay said:
http://forum.xda-developers.com/showthread.php?t=1886460
1.) Download attached file from above link.
2.) Extract it
3.) Double click the RunMe.bat and follow instructions!
hit thanks if it helped you.
Click to expand...
Click to collapse
hi
my phone is not getting detected after running runme.bat,I am sure its caue of drivers but I cud nt found it anywhere please some one Help..and also can we use other mediatech custom roms on these one
I have samsung and htc mobile drivers installed so it detected, not sure which one works.
How to install adb driver...
matharuajay said:
I have samsung and htc mobile drivers installed so it detected, not sure which one works.
Click to expand...
Click to collapse
Use the Adb Driver Installer to install drivers supported by your device from the following link. I just used it to install and root my Andi 5c. It installed HTC drivers for my iball device.
http://forum.xda-developers.com/showthread.php?t=2091922
pulak said:
Use the Adb Driver Installer to install drivers supported by your device from the following link. I just used it to install and root my Andi 5c. It installed HTC drivers for my iball device.
http://forum.xda-developers.com/showthread.php?t=2091922
Click to expand...
Click to collapse
Thanks Seems like this might work..will give it a try as sme time soon
And is there any Kernel Custom rom available, which i doubt . i cud not find any one so far
adi.borndevil said:
Thanks Seems like this might work..will give it a try as sme time soon
And is there any Kernel Custom rom available, which i doubt . i cud not find any one so far
Click to expand...
Click to collapse
hey.. i have successfully rooted my andi 4.5h.. u install samsung drivers ur phone will be detected..
What about cwm recovery?
How to root iball and4.5h
being a layman would like to know where do i download the file in my computer or the mobile phone. tried to run runme.bat on the phone but it does not recognize the file type. please advise
matharuajay said:
http://forum.xda-developers.com/showthread.php?t=1886460
1.) Download attached file from above link.
2.) Extract it
3.) Double click the RunMe.bat and follow instructions!
hit thanks if it helped you.
Click to expand...
Click to collapse
This method is not working on iball andi 4.3j +
cwm recovery
cwm recovery please................
recovery
hi guys i found this tutorial to install recovery for any mtk6577 phones.can anyone try this as iam not a technically sound guy
http://chinagizmos.blogspot.in/2012/10/porting-touch-recovery-for-mt65xx-phones.html
Finally Rooted
Finally Rooted it Successfully.
for Source
just go here : http://skytech101.blogspot.in/2013/02/how-to-root-iball-andi-45h.html
or
Read this tutorial :
1. Download Rooting Kit here : http://www.mediafire.com/?cnvohexs662qvo9
2. Make sure that USB debugging is on your device. To enable go to Settings >Development >USB debugging
3. Extract the Rooting Kit on your PC and connect your phone. Don't turn on USB Storage
4. In the Rooting kit folder you have extracted start the "Runme.bat" file
5. A command prompt will start now
6. Now you will get Onscreen Instructions just follow them carefully.
To start the process just type "1" and then hit Enter. Now you will get the instructions on the command
prompt follow that.
7. Your device will now reboot
Hurray your device is now Rooted..!! Now just enjoy..
Unrooting the phone :- Instep 5 instead of typing "1" type "x" and hit enter. This will Unroot your iBall Andi 4.5h
Stay connected for more updates..
Thanks to Skytech
Note : Its Rebranded Malata i8 Device
Please help in in build.prop
Hello.. i edited build.prop in my iball andi 4.5h in filder system/build.prop .. and it went into boot loop.. can you please give me the file o its contents as your phone is ooted and working?? Please help
Help Needed
Hello.. i edited build.prop in my iball andi 4.5h in filder system/build.prop .. and it went into boot loop.. can you please give me the file o its contents as your phone is ooted and working?? Please help
I want to customize my andy 3n can any1 give me rom and rooting process
how can i root my lava n320
it works on gingerbird 2.3.6
my kernel version is 2.6.35.7 {[email protected]}
my gcc version is 4.4.3
my uboot version is 2010.06
my bb chip version is mt6575
please help me ..........so that i'm able to root my phone...
Rooting is possible in LAVA IRIS N350
shael1435 said:
how can i root my lava n320
it works on gingerbird 2.3.6
my kernel version is 2.6.35.7 {[email protected]}
my gcc version is 4.4.3
my uboot version is 2010.06
my bb chip version is mt6575
please help me ..........so that i'm able to root my phone...
Click to expand...
Click to collapse
Hello Guys,
I've root access to my LAVA Iris N350.
The only Possible way to get root is by Downloading the Flash files.
I'll upload the Complete Process with the ROM Files Soon:angel:.
getmesar said:
Hello Guys,
I've root access to my LAVA Iris N350.
The only Possible way to get root is by Downloading the Flash files.
I'll upload the Complete Process with the ROM Files Soon:angel:.
Click to expand...
Click to collapse
do it fast please
Pls Speedly Update ..,I need it
Root LAVA IRIS N350 with SP Flash tool and Droid Root and tool.
NOTE: This can BRICK your Phone. I'm not responsible for any damage. Stop immediately if you aren't familiar with Flash files, ROM's etc.
I've successfully got access to the root of LAVA Irirs N350.
Tools Needed:
1. MTKDroid root and Tools
2. SP_Flash_Tool_v3.1224.01
Drivers Needed :MediaTek-1.1123.0
Let's Start:
Step 1. Make a Scatter File:
Open MTK Droid Tool and Click on Block Maps..this will pop a new Window containing some Memory address. Simply Click on "Create Scatter File" and save the file.
Step 2. Prepare SP Flash tool:
Open SP Flash Tool and Click over "Scatter Loading" and select the File which we have create din step 1. Click on Readback tab.
Step 3.Preapare ROM:
Click on the button ADD. Double click on the line and save the ROM.
#Things To notice: The filename Will be like "ROM_#". in your case probably it'll be ROM_0.
#Remember the path of the File. U'll use this file later.
Alfter Clicking Save a new Window will appear named as "Read Back Block Start Address"
Windows Settings Will be as below
Type: Hex
Read Method:Read Page Only
Start Address: 0x0000000000000000
Length:0x12BA0000
Step 4. Readback ROM:
Click on Read Back button and connect the switched-off phone to PC.
Follow these Steps Carefully.Once Rom is Created you can use it in future.On success you'll see a BIG GREEN CIRCLE embded in a message box.
Step 5. Prepare files for FlashTool and make CWM:
Open the MTK Droid Root & Tools window which we left on 1st step.it is necessary to turn on phone and to connect it to the program. Click on To process file ROM_ from FlashTool button and choose the ROM_* file saved earlier. At successful unpacking rom it will be offered to choose CWM from similar phone. Chosen CWM it is checked on compliance to the connected phone and if ok, the CWM is created.
MOTE: A new scatter file and other neccessary files are created in the backup folder in droid root & trool program's directory.you'll need the files in the next step.
Starting with v2.4.0 CWM it is made automatically and the file from similar phone shouldn't be looked for any more!
Step 6. Download new CWM to the phone:
Start FlashTool, choose scatter in the folder created on the previous step. Remove marks from all blocks! Click on RECOVERY and we choose the file CWM in the same folder which was created on the previous step. Click Download and connect a cable to PC (phone has to be switched off) and expect the end of process.
DANGEROUS! On this step the CWM recovery block has to be marked only! Also it is necessary to use only the Download button and not to use at all the Firmware Upgrade button!
Summary of step 6:
--> Click on Scatter-loading.Select Scatter file from the backup folder.
--> Make Sure all the checkboxes are unchecked. Only the Checkbox labled as Recovery should be Checked.
--> Click Exactly over Recovery.
--> It will ask you to select a file. Now select a Recovery file created in step 6. Tt must be inside backup folder named as "Recovery_###.img"
--> Click Button Download.
--> Connect SWITCHED OFF phone.
Message bog with a green circle shown? it means all done.Exit.
Step 7. Install Superuser.
Load phone in CWM mode, connect to MTK Droid Root & Tools, go on the tab root, backup, recovery and, pressing on this tab the necessary buttons, we do:
- install superuser (often mean "get root" under it)
You have a Rooted LAVA N350. :good:
Once Again: I'm not responsible for the any damage. Do it at your own risk.
friend ,
when I started mkt tool ,on right side message box promte that un-identify rom i.e rom cannot be create.
avoiding this i'm proceed to next step.
step 4 is not successfully done i.e it not proceeding.
now what i have to do? please help.
i rooted my lava iris n320 with this method thanks for this @getmesar nice of you to share this !
EDIT: I MADE A HQ THREAD HERE CHECK IT OUT
http://forum.xda-developers.com/showthread.php?p=45401999
install cm in lava n320
please solve my problem
I have root my lava n320 but I was not install cm in my device there is any easy way to install cm or how to install jellybean in my lava n320 please help me bro
Khan Noorullah said:
please solve my problem
I have root my lava n320 but I was not install cm in my device there is any easy way to install cm or how to install jellybean in my lava n320 please help me bro
Click to expand...
Click to collapse
Sorry! But you cannot install Jellybean on Lava N320.
Memory Offset not supported by MTK Chip.
Ok I am posting a simple tutorial to Root your Canvas HD and flash Custom Recovery without using SP Flash Tool. Sometimes it is very difficult for newbies to get proper driver and correct version of SP flash tool. Some users scared to use SP Flash Tool. So here is the solution.
Requirements:
1. Canvas HD of course
2. Framaroot application
3. Root Checker to check if your device is Rooted or not.
4. CWM v6.0.3.3 OR CWM v6.0.3.0 OR TWRP v2.5.0.0 or TWRP v2.6.3.0 or CWM v6.0.4.0 (Touch Based) or CWM v6.0.4.0
5. MobileUncle MTK Tools v2.9.8
Procedure:
1. Download the Framaroot application form the above link and transfer it to SD card
2. Now go to Settings>Security and put check mark on Unknown Soruces
3. Now use file manager and browse to the location where you have placed Framaroot Application
4. Install it and open it. Now Select "Install SuperSU" and hit Boromir.
5. Now go to Play Store and search for Super User and install it after opening it might ask to update SU.bin, hit yes and then "Normal"
6. Reboot your Device.
7. Check with Root Checker, if your device is rooted or not.
8. If it is rooted, download MobileUncle and install it, remember it require root access to work properly.
9. Now download any custom Recovery i.e. CWM or TWRP from the above link and rename it to recovery.img and place it in the root of SD card.
10. Now open MobileUncle and tap on Update Recovery it will automatically search the img file, you just have to select and confirm it. Then it will ask to boot your device into custom recovery tap on yes.
11. Your device would be booted into custom recovery.
Congrats your device is now rooted and flashed with Custom Recovery, now you can flash any custom ROM and now you have full control over your device.
How to Full Unroot and flash stock Recovery:
1. Download this stock Recovery file.
2. Rename the file to Recovery.img and place it in the root of SD Card.
3. Now open MobileUncle and tap on Recovery Update, it will search the file by itself, you just have to select the file and confirm.
4. It will then ask whether you want to boot into recovery, if you want to confirm you can tap on yes otherwise its not required.
5. Now open SuperSU and go to settings, scroll down to Full Unroot and tap on it. The process would be finished within 1 or 2 secs now you are on Stock v4.2.1 that too unrooted.
Now your warranty is intact you can go to service center for any help from them
Very Important: I am just trying to help you guys, I am not responsible for anything that might go wrong, follow this tutorial at your own risk.
this method works for sure ...right???
coz i have a friend who wants to root his new HD and we are on a trip with no computers....So....
it's working right...
adi_sat123 said:
this method works for sure ...right???
coz i have a friend who wants to root his new HD and we are on a trip with no computers....So....
it's working right...
Click to expand...
Click to collapse
I have first tried it then I have posted this tutorial, you can try it by yourself.
Works 100% for me on my Mobistel Cynus T5..Thanks...
working like a champ thanks:good:
nice_guy75 said:
Ok I am posting a simple tutorial to Root your Canvas HD and flash Custom Recovery without using SP Flash Tool. Sometimes it is very difficult for newbies to get proper driver and correct version of SP flash tool. Some users scared to use SP Flash Tool. So here is the solution.
Requirements:
1. Canvas HD of course
2. Framaroot application
3. Root Checker to check if your device is Rooted or not.
4. CWM v6.0.3.3 OR CWM v6.0.3.0 OR TWRP v2.5.0.0
5. MobileUncle MTK Tools v2.9.3
Procedure:
1. Download the Framaroot application form the above link and transfer it to SD card
2. Now go to Settings>Security and put check mark on Unknown Soruces
3. Now use file manager and browse to the location where you have placed Framaroot Application
4. Install it and open it. Now Select "Install SuperSU" and hit Boromir.
5. Reboot your Device.
5. Check with Root Checker, if your device is rooted or not.
6. If it is rooted, download MobileUncle and install it, remember it require root access to work properly.
7. Now download any custom Recovery i.e. CWM or TWRP from the above link and rename it to recovery.img and place it in the root of SD card.
8. Now open MobileUncle and tap on Update Recovery it will automatically search the img file, you just have to select and confirm it. Then it will ask to boot your device into custom recovery tap on yes.
9. Your device would be booted into custom recovery.
Congrats your device is now rooted and flashed with Custom Recovery, now you can flash any custom ROM and now you have full control over your device.
How to Full Unroot and flash stock Recovery:
1. Download this stock Recovery file.
2. Rename the file to Recovery.img and place it in the root of SD Card.
3. Now open MobileUncle and tap on Recovery Update, it will search the file by itself, you just have to select the file and confirm.
4. It will then ask whether you want to boot into recovery, if you want to confirm you can tap on yes otherwise its not required.
5. Now open SuperSU and go to settings, scroll down to Full Unroot and tap on it. The process would be finished within 1 or 2 secs now you are on Stock v4.2.1 that too unrooted.
Now your warranty is intact you can go to service center for any help from them
Note: It will install SuperSU v1.34 but v1.51 is also released, so you can upgrade your SuperSU by flashing the zip via custom recovery.
Very Important: I am just trying to help you guys, I am not responsible for anything that might go wrong, follow this tutorial at your own risk.
Click to expand...
Click to collapse
Will this trick work on Canvas 2 too..??
Thank you.....
It works!!!!
Thank you OP....
abhishekjain.ims said:
Will this trick work on Canvas 2 too..??
Click to expand...
Click to collapse
I don't have Canvas 2 so I cant tell you. Frameroot should work on Canvas 2 as well but not sure about recovery.img.
nice_guy75 said:
I don't have Canvas 2 so I cant tell you. Frameroot should work on Canvas 2 as well but not sure about recovery.img.
Click to expand...
Click to collapse
Ok...it did..1 of my friend successfully completed this trick..thanks :victory:
niceaf5 said:
I have first tried it then I have posted this tutorial, you can try it by yourself.
Click to expand...
Click to collapse
What to do after 9th step....after selectng image nd confirming it...phone goes into
Recovero...blak screeb appears with some points written on it...
Thn it will reboot automatically or i hav to manually select reeboot optiob by pressing volume keys nd thn pressing power button fr trbooting....m i right ...??
Sunny37886 said:
What to do after 9th step....after selectng image nd confirming it...phone goes into
Recovero...blak screeb appears with some points written on it...
Thn it will reboot automatically or i hav to manually select reeboot optiob by pressing volume keys nd thn pressing power button fr trbooting....m i right ...??
Click to expand...
Click to collapse
Tell me what points are written on it?
nice_guy75 said:
Tell me what points are written on it?
Click to expand...
Click to collapse
5-6 point..dont remembr properly..i selected reboot
1st was reeboot
Advanced
Cache_______
Prtition
Dnt remembr properly...
Btw Root checkr shows device rooted..
Sunny37886 said:
5-6 point..dont remembr properly..i selected reboot
1st was reeboot
Advanced
Cache_______
Prtition
Dnt remembr properly...
Btw Root checkr shows device rooted..
Click to expand...
Click to collapse
Ok, got it you are rooted and flashed with CWM.
cam is not working
My front cam is not working...
Shows a white screen..
I am having hard time unrooting my phone..
I guess i need to contact service center but i need to unroot it first as the cams were working fine before root..
Pls help.
sunny041 said:
My front cam is not working...
Shows a white screen..
I am having hard time unrooting my phone..
I guess i need to contact service center but i need to unroot it first as the cams were working fine before root..
Pls help.
Click to expand...
Click to collapse
Everything is explained in the tutorial then also you are unable to unroot?
nice_guy75 said:
Everything is explained in the tutorial then also you are unable to unroot?
Click to expand...
Click to collapse
I did it...
But the phone is not looking the way i should be means all the changes i hade done in the phone are still there and version is 4.1.2 only..
sunny041 said:
I did it...
But the phone is not looking the way i should be means all the changes i hade done in the phone are still there and version is 4.1.2 only..
Click to expand...
Click to collapse
What kind of changes are you talking about? If you are talking about the changes which you have made through Gravity Box and other modules of Xposed framework then you should just uninstall the Xposed Framework.
nice_guy75 said:
What kind of changes are you talking about? If you are talking about the changes which you have made through Gravity Box and other modules of Xposed framework then you should just uninstall the Xposed Framework.
Click to expand...
Click to collapse
Ty buddy...
It looks like before now....
Now pls tell me do i really need to take it to the service center or there is some way to fix the camera problem...
No bugs works like a charm finished rooting and installing cwm in 5 Minutes amazing!!
Sent from my Micromax A116 using xda premium
sunny041 said:
Ty buddy...
It looks like before now....
Now pls tell me do i really need to take it to the service center or there is some way to fix the camera problem...
Click to expand...
Click to collapse
I would suggest you to go to Service centre only.
How To Root And install Custom Recovery { I already used many one click root softwares like kingroot,iroot, framaroot and etc } Plz Help Me
There is no way to root micromax e455 until now
Sent from my Micromax E455 using XDA Free mobile app
I have rooted micromax e455 (Nitro 4G) through kingroot, but i was not able to go to recovery mode, used sp flash tool, now working fine
emhashmi said:
How To Root And install Custom Recovery { I already used many one click root softwares like kingroot,iroot, framaroot and etc } Plz Help Me
Click to expand...
Click to collapse
Though i am not an expert android developer but i have found a way to root this phone. I have not yet been able to find custom recovery (TWRP or CWM) for this phone yet.
Anyways the procedure of rooting is given below. I have tested this on my own phone but cannot guarantee that it will work on your phone also. Use it at your own risk and do not blame me if you make your phone a brick or paper weight!
1. Download Mi4i Toolkit from here:
http://forum.xda-developers.com/mi-4i/development/tool-mi-toolkit-v4-root-twrp-stock-t3170607
2. Enable Developer Options in the phone (Go to Settings and press version 7 times in "About Phone") and then in Developer Options will appear under setting.
3. In developer options enable USB debugging.
3. Extract the toolkit ZIP wherever you like, but keeping all files in same folder.
4. Download and install drivers from micromax website.
5. Connect your phone to the PC.
6. Run the Start.bat file and select option no.1. The phone will automatically reboot and you will find superuser.apk in app drawer.
Warning>>>> Do not select option no.2 (Custom reovery....) or 5 (Stock recovery......) as the same will brick this device.
These posted by sandss. I don't know it work for you or not
Can you pleases compile twrp gor this mobiles
I have rooted my Micromax canvas 2.2 A114 through frama root and granted access to Root Browser thorugh Supersu. Later through root browser, i was allowing all privileges, including special privileges to ROOT folder. Just after pressing OK, phone got hanged and after reinserting battery also, it is not booting. I tried factory and cache reset through recovery mode too. What shall I do to correct it?
nkjain87 said:
I have rooted my Micromax canvas 2.2 A114 through frama root and granted access to Root Browser thorugh Supersu. Later through root browser, i was allowing all privileges, including special privileges to ROOT folder. Just after pressing OK, phone got hanged and after reinserting battery also, it is not booting. I tried factory and cache reset through recovery mode too. What shall I do to correct it?
Click to expand...
Click to collapse
flash stock rom
And how to do that?
nkjain87 said:
And how to do that?
Click to expand...
Click to collapse
Follow the steps below:
[WARNING:I AM NOT RESPONSIBLE IF ANYTHING HAPPENS TO YOUR DEVICE. DO IT AT YOUR OWN RISK]
Download the following files
Stock firmware: http://www.mediafire.com/?qsbuu265jfhf7b1
Sp flash tool: https://drive.google.com/file/d/0B8HspVLwTTxtVUJmcS1VMXVzaUk/view
Usb driver: https://drive.google.com/file/d/0B8HspVLwTTxtWWJsYnNJR2kxeEE/view
Step 1: Install drivers in your PC
Step 2: Extract the Stock ROM folder where you want
Step 3: Extract and open the SP Tool. Sptool.exe Run as Administrator
Step 4: Click on Scatter-Loading option.
Step 5: SpTool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt” which is our scatter file.
Step 6: Now click on Download.
Step 7: Connect your switch off phone with PC via USB cable (Make sure your phone is switched off).
Step 8: SP Tool detect your phone and process will start.
Step 9: Now start downloading Stock Rom in your phone by flashing
Unplug your device after downloading is complete
Done
Regards milkyway3