Hello,
I have CM 13.0.1 on my galaxy s3.
My problem is that I wanted to fix the random stopping of the camera while getting the 'Can't connect to camera' message. I installed the Restart Camera app and flashed the CM_Fixed_Camera_for_CM_All_AOSP_roms_by_RohanAJoshi_V5.0 .zip , and wiped dalvik cache. From then I can't even open the camera.
I've tried to reflash the Google Camera from gapps with aroma installer, but nothing works.
Can anyone help me?
Xdina said:
Hello,
I have CM 13.0.1 on my galaxy s3.
My problem is that I wanted to fix the random stopping of the camera while getting the 'Can't connect to camera' message. I installed the Restart Camera app and flashed the CM_Fixed_Camera_for_CM_All_AOSP_roms_by_RohanAJoshi_V5.0 .zip , and wiped dalvik cache. From then I can't even open the camera.
I've tried to reflash the Google Camera from gapps with aroma installer, but nothing works.
Can anyone help me?
Click to expand...
Click to collapse
Boot to recovery, wipe cache and dalvik but do not factory reset, then reboot.
If that doesn't help, boot to recovery, wipe everything and reflash the ROM. Then don't use that zip you flashed.
How to fix the camera l don't know but you won't fix it with the stuff you have done, need to clean the slate and start over.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Related
"Unfortunately Setup Wizard has stopped working" - after trying to install Gapps
So I've successfully managed to get the current CM nightly on my S2, after a few trials and tribulations.
I'd left my phone alone for a bit, all working fine.
Then I decide to get it sorted properly, and install the Google Apps.
Googling told me to use the 20120429 version. So I downloaded that (using the phone's browser), went into CWM and installed it. No joy.
Silly me, I didn't reset + clear cache. So I did that. Still no joy.
So now I've re-installed CM and done a reset + clear cache.
And still I'm stuck looking at the 'setup wizard stopped working' messages, in an endless soul-destroying loop
What can I do?
Would re-installing a stock rom and then re-rooting do the trick?
I can't get Odin to connect, and so I've copied the zipped 4.0.3 rom into the internal SD card, but CWM fails (is it because it has a .dll file alongside the .tar?)
I'm wishing I'd left the phone alone now
RostokMcSpoons said:
So I've successfully managed to get the current CM nightly on my S2, after a few trials and tribulations.
I'd left my phone alone for a bit, all working fine.
Then I decide to get it sorted properly, and install the Google Apps.
Googling told me to use the 20120429 version. So I downloaded that (using the phone's browser), went into CWM and installed it. No joy.
Silly me, I didn't reset + clear cache. So I did that. Still no joy.
So now I've re-installed CM and done a reset + clear cache.
And still I'm stuck looking at the 'setup wizard stopped working' messages, in an endless soul-destroying loop
What can I do?
Would re-installing a stock rom and then re-rooting do the trick?
I can't get Odin to connect, and so I've copied the zipped 4.0.3 rom into the internal SD card, but CWM fails (is it because it has a .dll file alongside the .tar?)
I'm wishing I'd left the phone alone now
Click to expand...
Click to collapse
What version of CyanogenMod are we talking about here? You need to be more specific.
themadba said:
What version of CyanogenMod are we talking about here? You need to be more specific.
Click to expand...
Click to collapse
Right, maybe I found the cause of the problem - I've installed cm-10.1-20130125-NIGHTLY-i9100 but when I wanted to find out which version of Gapps I needed I couldn't be sure what it was so I decided to just find the original download page again. But somehow I managed to find this page http://get.cm/?device=galaxys2 (a rather too easy mistake to make?) ...which has version 9! So I've tried to install the wrong Gapps file
RostokMcSpoons said:
Right, maybe I found the cause of the problem - I've installed cm-10.1-20130125-NIGHTLY-i9100 but when I wanted to find out which version of Gapps I needed I couldn't be sure what it was so I decided to just find the original download page again. But somehow I managed to find this page http://get.cm/?device=galaxys2 (a rather too easy mistake to make?) ...which has version 9! So I've tried to install the wrong Gapps file
Click to expand...
Click to collapse
I thought you might have! I'm not sure whether a simple flash of the correct gapps file will solve your problem or whether you will need to wipe data/factory reset, wipe cache and wipe dalvik cache, reinstall the CM10.1 nightly and then flash the correct gapps file which can be found here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
Try just wiping your cache and dalvik cache in recovery and flashing the new gapps file I linked, if the flashing process doesn't last for atleast 20 seconds, then you may have to carry out the steps I listed above for a complete reinstall.
themadba said:
I thought you might have! I'm not sure whether a simple flash of the correct gapps file will solve your problem or whether you will need to wipe data/factory reset, wipe cache and wipe dalvik cache, reinstall the CM10.1 nightly and then flash the correct gapps file which can be found here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
Try just wiping your cache and dalvik cache in recovery and flashing the new gapps file I linked, if the flashing process doesn't last for atleast 20 seconds, then you may have to carry out the steps I listed above for a complete reinstall.
Click to expand...
Click to collapse
Thanks but I've now tried the reset / wipes / reinstalls multiple times to no avail. And now when I connect my phone to my pc to try to put the correct gapps zip on there, Windows Explorer is only showing a few of the folders on Internal Storage. The stuff that I've already got at root isn't showing. Have I knackered my phone?
I'm going to have to leave it til the morning - the battery is nearly empty.
Edit: Damn, I couldn't get to sleep without fixing it first, and luckily I did: I rebooted my pc, and the explorer eventually did show the contents ok (just very slowly). I dragged the zip in, installed it with CWM and *huzzah* it's working! The only odd thing is the camera has disappeared from the applications...
I can wait until tomorrow to work that out.
Thanks for your help
RostokMcSpoons said:
Thanks but I've now tried the reset / wipes / reinstalls multiple times to no avail. And now when I connect my phone to my pc to try to put the correct gapps zip on there, Windows Explorer is only showing a few of the folders on Internal Storage. The stuff that I've already got at root isn't showing. Have I knackered my phone?
I'm going to have to leave it til the morning - the battery is nearly empty.
Click to expand...
Click to collapse
That's strange. I recently flashed a wrong gapps file and it led to some things not working, especially the Play Store. I tried just wiping the cache and dalvik cache and flashing, but that didn't work. So I did a wipe data/factory reset, wipe cache and wipe dalvik cache, reflashed the ROM and then flashed gapps. I think I may have wiped the cache and dalvik cache once more for good luck, and then repaired permissions in the advanced section of recovery. Phone booted up fine and all apps worked perfectly. I doubt the phone is knackered, perhaps try and different ROM just to make sure it boots fine, and then try flash CM10.1 again. Good luck
Samsung Galaxy s2 CM10 trouble Setup Wizard has stopped working
Im from Asia and I guess Samsung s2 int’l version has different features. I already updated my firmware to JB 4.1.2 (leaked) and since I am not satisfied with it,I rooted it and installed siyah as well as cm10 + gapps from XDA links. I followed everything according to the posts and vids.The problem is that after rebooting and CM start up showed up,the next prompt was UNFORTUNATELY,SET UP WIZARD HAS STOPPED WORKING. What’s wrong? I have tried 6x times and no one worked correctly. HELP me!
I was under the same problem few days ago...
flashed 4.2.2 gapps on 4.1.2..
and succumbed to 'unfortunately setup wizard has stopped' error, until i flashed the respective 4.2.2 gapps.
but sadly it ate away my internal memory (cant help )
So the point is
just flash the respective gapps
and then the ROM again
Hi I just installed cyangenmod and it works but setup wizard is crashing and I don't know how to fix this my phone its pretty much unusable. Need help urgently!
The key is to wipe regular cache partition after installing Gapp zip! :]
I think you have the key. I get my cm10.1.5 and I flashed a realy slim gapps (11mb), but after that I didn't wipe cache and dalvik. So the phone didn't woke up because it get stucked in the wizzard setup. So I have to do as u said. And like the other said, reinstall the rom and then the gapps.
Galaxy 5
After using android 2.1 update 1 in my samsung galaxy 5 (GT-I5503)
I updated it with 2.2 froyo then 2.3 then 4.0 then 4.1.
last time I updated to 4.2 CyanogenMod
Before that I could work good in others. But in 4.2 there were problem of contacts in SIM card, these contacts not showing in device.
Then after my device not detacting SIM card for last few months.
Now my phone showing "Unfortunately, Setup Wizard has stopped."
How can I start my phone?
Galaxy Grand CM12 error
Hi,
I have succesfully flashed my galaxy grand and installed CM12 as per instructions given. But i am constantly facing issue of "Unfortunately Setup wizard has stopped". I have tried all the methods mentioned, but still facing same.
Pls Help
fixed this error(setup wizard or google play service has stoped).first you must install cm13 after that install your gapps(use phliz toch recovery) then reboot device.you Will notic that device doesn't boot or you'll have the same problem(setup wizard).come back to recovery and install the other recovery(change phliz touch to CWM) then with wipe install the same ROM and after that install gapps.the gapps won't install so reboot the device.enjoy your ROM with gapps
fix
FOR ANY1 facing this problem on cm13 setup wizard stopped.
just do as i say it's actually funny but it worked for me for the very 1st time.
I tried all the fix given like clear cache or flash new gapps but nothing solved the problem.
So just do what i say.
when u see the setup wizard stopped error.
on that screen just touch all the corner of the screen of ur phone
staring from the top left corner then the top right and so to the bottom right corner and then at last the left most corner.
Just keep trying i doesn't happen for the first time.
Most of u would be thinking it's funny but it actually worked just give it a try.
it helped me might work for u as well
---------- Post added at 07:49 PM ---------- Previous post was at 07:43 PM ----------
dkarry said:
Hi,
I have succesfully flashed my galaxy grand and installed CM12 as per instructions given. But i am constantly facing issue of "Unfortunately Setup wizard has stopped". I have tried all the methods mentioned, but still facing same.
Pls Help
Click to expand...
Click to collapse
bro just start your phone and on the screen where u see the error
leave it as it is and do this:
touch the top most left corner twice like tapping on it nad then the right most corner then the right bottom corner then lastly the left most corner.
it helped me might help u as well
sir,
i have samsung galaxy star GT-S5282 model but i am unabble to start the Device because of error of unfortunately samsung setup wizard has stoppeed
OK, I;ve read already the few thread about the Warning message "Camera Failed" but haven't found one that one that would help diagnose before taking more drastic action.
After installing ArchiDroid 1.5 custom rom, everythings works very nicely except the camera which give me a "Warning: camera Failed" message
is there a way to re-install only the Camera application or .pak to see if that is the problem, any other thoughts ?
PS: I did a wipe before installing ArchiDroid. I don't think I've cleared the Dalvik, can it be part of the prob ?
Thanks
PS: My first ROM install so maybe this issue is normally easy to fix for more advance people.
Phone : GS 3 I9300
Best go back, wipe again including system, data and dalvik before flashing again - there is a flashable script that will do the wiping for you, or use Philz recovery which has it built in.
If your rom is based on Samsung stock then camera should work, if aosp then camera can be a problem. If still the same after reflash then ask your rom chef for help.
boomboomer said:
Best go back, wipe again including system, data and dalvik before flashing again - there is a flashable script that will do the wiping for you, or use Philz recovery which has it built in.
If your rom is based on Samsung stock then camera should work, if aosp then camera can be a problem. If still the same after reflash then ask your rom chef for help.
Click to expand...
Click to collapse
Thanks. I did flash again after wiping (still not Dalvik as I couldn't remember how to access such option), but selected the Stock instead of perseus and things are working now .
Hi all,
So I flashed my rom from RRemix ROM over to Cyanogenmod 11, everything seems to work fine with the exception of texting... I keep getting the message "Messanger has stopped", this happens on both the default app as well as Handcent.
I tried clearing my cache and wiping the app data... I also tried clearing cache and divik cache in CWM v6.0.4.7. Now, I was going to try to reflash gapps but of course there is some kinda bug with CWM v6.0.4.7 where it won't let me flash gapps (http://forum.xda-developers.com/par...apps-official-to-date-pa-google-apps-t2943900), and there is no upgrade to CWM for the S3 i747 ATT... I guess I could downgrade? Or should I switch to another recovery app?
Any other ideas? I wanted to ask before I just wipe the phone and start from scratch.
Thanks guys! If I missed any important information let me know!
You know what... doing a I guess it's called a "dirty flash" wasn't the best idea.... I assume that is what the Cyanogenmod autoinstaller does?
Went back to my old ROM and will try a clean install later on.
Hi;
So i recently installed CyanogenMod 13.0 on to my Samsung S4 GT-I9505 using the first download link on:
https://download.cyanogenmod.org/?device=jfltexx --> cm-13.0-20160102-NIGHTLY-jfltexx.zip
That all installed fine, but i wanted to get the Google apps installed aswell, which is where i am having some issues.
I have been trying to install the following package:
http://opengapps.org/?api=6.0&variant=nano
but have also tried to install quite a few others as well, and all have exactly the same issue. Basically after the apps have been installed and i boot the device up, i get various error messages like:
unfortunately, Setup Wizard has stopped
unfortunately, google play services has stopped
Any help on fixing this would be much appreciated, as nothing seems to download from the play store thats included in Cyanogen, they just say "your download will begin shortly" but never does.
Thanks in advance
I am a total noob, but I had exactly this problem. The issue appears to be that you have to flash gapps *before* rebooting after flashing CM. In my case since I had already flashed CM before I flashed gapps I had to put the gapps file on the phone (I did this by push with adb, you might find an easier way), re-flash CM, wipe cache/dalvik, flash gapps, wipe cache/dalvik, reboot. It worked.
The easiest guide I found was on androiding.how, called "how to install cm13 (cyanogenmod13)." (The forum won't let me post a link, just google it, it should come up).
Hope that helps. I'm on a galaxy s5 and used twrp recovery if that matters.
audacityandrouge said:
I am a total noob, but I had exactly this problem. The issue appears to be that you have to flash gapps *before* rebooting after flashing CM. In my case since I had already flashed CM before I flashed gapps I had to put the gapps file on the phone (I did this by push with adb, you might find an easier way), re-flash CM, wipe cache/dalvik, flash gapps, wipe cache/dalvik, reboot. It worked.
The easiest guide I found was on androiding.how, called "how to install cm13 (cyanogenmod13)." (The forum won't let me post a link, just google it, it should come up).
Hope that helps. I'm on a galaxy s5 and used twrp recovery if that matters.
Click to expand...
Click to collapse
Thanks for the reply, i gave that a try and it seems to be stuck on a loop now with "installing app # of 22" . it completes the installation and then reboots, after about 5 minutes on the Cyanogen boot screen, it goes back to installing apps again.
Hm, did you do a factory reset in your recovery before re-flashing CM and gapps? If not, that might be necessary.
audacityandrouge said:
Hm, did you do a factory reset in your recovery before re-flashing CM and gapps? If not, that might be necessary.
Click to expand...
Click to collapse
Yeah, i did. Tried it multiple times now
That's about the limit of my ability right there, hopefully someone with more experience than me can point you in the right direction. Good luck.
Boot to recovery (preferably TWRP)
Wipe cache / dalvik cache / data / system
Flash CM13 and the gapps you were trying first
Reboot
Profit!
Since you keep flashing different gapps on top of the system, this is probably causing some issues. Once you fully wipe and reflash everything, it should work.
es0tericcha0s said:
Boot to recovery (preferably TWRP)
Wipe cache / dalvik cache / data / system
Flash CM13 and the gapps you were trying first
Reboot
Profit!
Since you keep flashing different gapps on top of the system, this is probably causing some issues. Once you fully wipe and reflash everything, it should work.
Click to expand...
Click to collapse
Ive tried that multiple times using twrp (i always wipe everything before i flash CM13 and gapps), i still get the exact same issue. The second the phone boots, i get all these "unfortunately ******** has stopped".
Perhaps try installing 12.1 with gapps, get it all updated then upgrade to 13. I did the accidental upgrade to 13 but have had no issues whatsoever.
I load up YouTube app, and the app loads up, but no content.
I tried Lineage with gaaps and pixel experience where you don't need gaaps flashed.
I cleared cache, Dalvik, cache of the app, uninstall and reinstall app. It's just odd the same issue persists with multiple roms.
Plz explain/help?
Hi i av the same problem did you find a solution to fix this thanks
Greetings. Thank you for posting your issue. I've had the same issue recently.
My problem was that the persist partition got wiped for some random reason. This seems to be a common issue on this device, and most likely you're facing the same problem. For me, apart from YouTube, all the sensors of the device stopped working as well (auto-rotation for example).
To fix this do the following:
1) Make sure you're using the latest TWRP from HavocOS (here)
2) Flash MIUI v10. I used MIUI v10.3.1 from xiaomi.eu (here), but you can use whichever you want, without any trouble.
3) Boot the device. Let it load... then back to recovery. Wipe System, Data, Dalvik and Cache
4) Flash the ROM you want to use
hi i tried your method but on boot i keep getting encryption error unsuccessful
daddy2be2015 said:
hi i tried your method but on boot i keep getting encryption error unsuccessful
Click to expand...
Click to collapse
Try doing a wipe /sdcard from your recovery