I have a Iman Victor Android 6.0 Phone, I could not find this phone on the Forum, anyone know of any possible roots for it?
revowow said:
I have a Iman Victor Android 6.0 Phone, I could not find this phone on the Forum, anyone know of any possible roots for it?
Click to expand...
Click to collapse
Kingo root?
Sent from my LG-D852 using Tapatalk
viddy135 said:
Kingo root?
Sent from my LG-D852 using Tapatalk
Click to expand...
Click to collapse
Tried Kingroot, Farmaroot, Xposed. All 3 dont work.
revowow said:
Tried Kingroot, Farmaroot, Xposed. All 3 dont work.
Click to expand...
Click to collapse
Then ur Sol
Sent from my LG-D852 using Tapatalk
Blackview BV6000 has the same chipset and there are some guides on line about how to root it. Maybe it's possible to use the same procedure and tools for this Iman Victor as well.
Sent from my Victor using XDA-Developers mobile app
successfully iman victor root
Hi,
following the guide here http://www.stupdroid.com/2016/10/port-recoveries-twrp-cwm-philz-mt67xx.html
I've edit the recovery for elephone P9000 whit this tool http://forum.xda-developers.com/android/development/tool-cika-carliv-image-kitchen-android-t3013658
and then flashed it whit SP Flash Tool v5.1644 following this guide http://www.gizbeat.com/10576/blackview-bv6000-twrp-and-root-mt6755-helio-p10-guide/
after I installed the supersu zip from TWRP recovery
and everything worked for my iman victor
attached here you can find the file that I've used
thanks to everyone that makes the programs and files that I've used!
Max
Great news indeed! Going to try it out tonight
It's really awesome! I have been searching high and low for the rooting of iMan Victor. I have got mine last week and still wondering how to root it.
By the way, do you guys facing the NFC compatibility issue? I couldn't get my Android Pay as well as the NFC Card reader working.
Oh no, I just tried to flash it and it failed. Mine is a 4GB ROM 64GBRAM model. Does it matter? Need assistance from bro and sis here. The steps that I went through were as follows:
1) Downloaded both the files by max74926.
2) Flash it with SP Flash Tool v5.1644 by selecting both the scattered file and recovery img downloaded in step 1).
3) Click on Download on SP Flash Tool and plug in the microUSB to iMan Victor while pressing the volume + button.
4) A red Download DA 100% bar appeared followed by an error box ERROR: STATUS_PRELOADER_INVALID (0xC0030004).
Any clue? What did I do wrongly?
mine is 3Gb ram 32GB rom, I don't know if this matter
you need to click download in SPFlash Tool, then plug the phone switched off whitout pressing any button.
be sure to have installed the right driver for your OS. I use win7 because in win10 the driver do not worked propely for me.
for the NFC problem I do not use it, I try read a card and it worked but trying to emulate a card and the error is secure element not found, may be that is an hardware lack, that is needed also for Android Pay
max74926 said:
mine is 3Gb ram 32GB rom, I don't know if this matter
you need to click download in SPFlash Tool, then plug the phone switched off whitout pressing any button.
be sure to have installed the right driver for your OS. I use win7 because in win10 the driver do not worked propely for me.
for the NFC problem I do not use it, I try read a card and it worked but trying to emulate a card and the error is secure element not found, may be that is an hardware lack, that is needed also for Android Pay
Click to expand...
Click to collapse
Thank you max74926 for your fast response.
I am thinking could it be due to my driver issue. I clicked download in SPFlash Tool, then plug the phone switched off without pressing any button, there was no response. However if I plug the phone switched off with pressing the vol+ button, there was a red bar appeared with 100% then prompted me with error message.
I tried to follow the guide which you attached with the link. I am still confused how do you get the stock recovery from our device? May be you can assist me with that. Thank you!
mywish69 said:
Oh no, I just tried to flash it and it failed. Mine is a 4GB ROM 64GBRAM model. Does it matter? Need assistance from bro and sis here. The steps that I went through were as follows:
1) Downloaded both the files by max74926.
2) Flash it with SP Flash Tool v5.1644 by selecting both the scattered file and recovery img downloaded in step 1).
3) Click on Download on SP Flash Tool and plug in the microUSB to iMan Victor while pressing the volume + button.
4) A red Download DA 100% bar appeared followed by an error box ERROR: STATUS_PRELOADER_INVALID (0xC0030004).
Any clue? What did I do wrongly?
Click to expand...
Click to collapse
Reinstall vcom Driver, if Not Solve
try to Change Scatter with From your own 4GB Variant,
Current Device- Redmi Note 3 3Gb 32GB
Official miui 8 Dev Rom, Rooted , Xposed with a lot's Of Modules,
Old Devices-
htc M9,
yu yureka:good:
mywish69 said:
Thank you max74926 for your fast response.
I am thinking could it be due to my driver issue. I clicked download in SPFlash Tool, then plug the phone switched off without pressing any button, there was no response. However if I plug the phone switched off with pressing the vol+ button, there was a red bar appeared with 100% then prompted me with error message.
I tried to follow the guide which you attached with the link. I am still confused how do you get the stock recovery from our device? May be you can assist me with that. Thank you!
Click to expand...
Click to collapse
you can download the entire ROM from needrom http://www.needrom.com/download/iman-victor/
this include also the recovery
This method didn't work for me either, the guides are also kinda confusing because of weird instructions, especially the recovery port guide is very unclear.
PS: on a 32GB + 3GB version
XN Logos said:
Reinstall vcom Driver, if Not Solve
try to Change Scatter with From your own 4GB Variant,
Click to expand...
Click to collapse
Tried reinstalling vcom Driver, but still not working. I tried flashing my old zopo980 phone with the same computer and FlashTool without issue.
Not sure where can I get the Scatter file for 4GB variant.
max74926 said:
you can download the entire ROM from needrom http://www.needrom.com/download/iman-victor/
this include also the recovery
Click to expand...
Click to collapse
I have downloaded the ROM and extracted just the Scatter file out. It still no response when I plug in my phone. Very strange ~~~
Not sure if there is any ROM different for 4GB and 3GB version.
I am so desperate to rooting my iMan Victor....
I got this phone recently. It's not working with Indian mobile networks. Cab anybody help?
Does anyone have a functional guide to root version 4 gigabytes + 64 gigabytes? On my phone, wifi bug NVRAM warning: Err = 0x10
st.zboril said:
Does anyone have a functional guide to root version 4 gigabytes + 64 gigabytes? On my phone, wifi bug NVRAM warning: Err = 0x10
Click to expand...
Click to collapse
follow this Guide
Error
ERROR: STATUS_PRELOADER_INVALID (0xC0030004). Have anybody guide for 4BG/ 64BG version functtion? Mee too error message
---------- Post added at 10:20 AM ---------- Previous post was at 10:11 AM ----------
mywish69 said:
Oh no, I just tried to flash it and it failed. Mine is a 4GB ROM 64GBRAM model. Does it matter? Need assistance from bro and sis here. The steps that I went through were as follows:
1) Downloaded both the files by max74926.
2) Flash it with SP Flash Tool v5.1644 by selecting both the scattered file and recovery img downloaded in step 1).
3) Click on Download on SP Flash Tool and plug in the microUSB to iMan Victor while pressing the volume + button.
4) A red Download DA 100% bar appeared followed by an error box ERROR: STATUS_PRELOADER_INVALID (0xC0030004).
Any clue? What did I do wrongly?
Click to expand...
Click to collapse
I have the same mistake!!! I have 4GB/64BG model
st.zboril said:
ERROR: STATUS_PRELOADER_INVALID (0xC0030004). Have anybody guide for 4BG/ 64BG version functtion? Mee too error message
---------- Post added at 10:20 AM ---------- Previous post was at 10:11 AM ----------
I have the same mistake!!! I have 4GB/64BG model
Click to expand...
Click to collapse
Bro st.zbroil, have you found a solution to it? I am still waiting for someone with the same variant 4G 64G model to enlighten the rooting process.
Instalation Guide iMAN Victor 4GB/64GB, flash new rom, Root phone.
This guide has been tested on the phone Iman Victor 4GB / 64 GB
Download:
Instalation Guide
iMan Victor ROM (20160912)
SP Flash Tools
TWRP iMan Victor
Super SU v. 2.76
Related
I have just received my Iocean X7 Elite and was about to install a new rom. I had successfully rooted the device and then was trying to flash
the recovery with SP Flash Tool.
After the recovery flashed my phone refuses to turn on I believe its somehow bricked but have no idea how this could have happened. I did
format flash i only downloaded the recovery to the device.
In Device Manager when i plug the phone it it either shows up as 'DA USB VCOM Port' or 'MTK USB Port'.
When I try to use SP Tool to flash the stock Rom back onto the device I get an error saying 'BROM ERROR : S_FT_ENABLE_DRAM_FAIL(4032)'
I have no idea what to do next can someone help me.
I have tried what this thread suggests:
bump
same as u..but differ phone model.(N9589)
had a few upgrd...til the recent brick it.
Tried a few version of flash tool and still the same
Joshafc said:
I have just received my Iocean X7 Elite and was about to install a new rom. I had successfully rooted the device and then was trying to flash
the recovery with SP Flash Tool.
After the recovery flashed my phone refuses to turn on I believe its somehow bricked but have no idea how this could have happened. I did
format flash i only downloaded the recovery to the device.
In Device Manager when i plug the phone it it either shows up as 'DA USB VCOM Port' or 'MTK USB Port'.
When I try to use SP Tool to flash the stock Rom back onto the device I get an error saying 'BROM ERROR : S_FT_ENABLE_DRAM_FAIL(4032)'
I have no idea what to do next can someone help me.
I have tried what this thread suggests:
Click to expand...
Click to collapse
Same problem here - tried to install stock firmware and got this error...
these are common problems when flashing MT65xx based phones,
ie : error 4008, 4xxx, 5xxx whatever those codes mean, no explanation after extensive search on google.
once I managed to flash this one phone successfully, but I don't know exactly what I did.
as long as I recall, I tried to delete the whole flashtool folders, re-extract them, let the phone cool down a bit
and oh, try to press volume up, or down button (varies on devices) while connecting to USB, once the flashing progress bar starts, release the button.
In the flashtool option, at the OPTIONS-->DA DOWNLOAD ALL-->, check WITHOUT BATTERY.
and in the option, DA DOWNLOAD ALL--> SPEED, check DO NOT SWITCH SPEED.
try flashing your phone without battery inserted, it works many times for me.
NOTE : BEWARE, flashing your MTK65xx based phone, sometimes this tool tried to REMOVE YOUR PHONE's IMEI information, so take caution !
I haven't managed how to prevent IMEI removal when flashing those phones, because I'm not a developer.
Hope this helps.
tukulll said:
these are common problems when flashing MT65xx based phones,
ie : error 4008, 4xxx, 5xxx whatever those codes mean, no explanation after extensive search on google.
once I managed to flash this one phone successfully, but I don't know exactly what I did.
as long as I recall, I tried to delete the whole flashtool folders, re-extract them, let the phone cool down a bit
and oh, try to press volume up, or down button (varies on devices) while connecting to USB, once the flashing progress bar starts, release the button.
In the flashtool option, at the OPTIONS-->DA DOWNLOAD ALL-->, check WITHOUT BATTERY.
and in the option, DA DOWNLOAD ALL--> SPEED, check DO NOT SWITCH SPEED.
try flashing your phone without battery inserted, it works many times for me.
NOTE : BEWARE, flashing your MTK65xx based phone, sometimes this tool tried to REMOVE YOUR PHONE's IMEI information, so take caution !
I haven't managed how to prevent IMEI removal when flashing those phones, because I'm not a developer.
Hope this helps.
Click to expand...
Click to collapse
Thank you for your reply, but this doesn't help... ;(
Anyone?
I think I figured out that the error above means you are trying to flash an incorrect ROM. Make sure you are using the right one and also make sure you're using the latest version of sp flash tool.
Once I downloaded a later version of the flash tool it began installing the ROM but then a different error appeared.
So I formatted the nand with the sp flash tool.
Then I flashed the stock ROM again and it worked
Formatting it seemed to make the errors go away even though its advised not to do so.
Sent from my iOCEAN X7 using xda app-developers app
vessk0 said:
Anyone?
Click to expand...
Click to collapse
I fixed this error by completely removing and reinstalling other drivers for mtk vcom loader
anyone heard Iocean will recall all of the x7 elite's? i've had a mail today they should do it, but i don't know if it's true or not.
Schumi_wk said:
anyone heard Iocean will recall all of the x7 elite's? i've had a mail today they should do it, but i don't know if it's true or not.
Click to expand...
Click to collapse
I haven't heard about that. Maybe its a fake email. Did it say what the fault was?
Joshafc said:
I think I figured out that the error above means you are trying to flash an incorrect ROM. Make sure you are using the right one and also make sure you're using the latest version of sp flash tool.
Once I downloaded a later version of the flash tool it began installing the ROM but then a different error appeared.
So I formatted the nand with the sp flash tool.
Then I flashed the stock ROM again and it worked
Formatting it seemed to make the errors go away even though its advised not to do so.
Sent from my iOCEAN X7 using xda app-developers app
Click to expand...
Click to collapse
How to format the nand with sp flash tool, I use the latest version?
And can you point me to good original stock ROM?
Thank you!
lolet said:
I fixed this error by completely removing and reinstalling other drivers for mtk vcom loader
Click to expand...
Click to collapse
I tried reinstalling drivers, also tried other drivers, but this doesn't help...
I've had the same problem with the following installation Sp Tools
SP_Flash_Tool_exe_v3.1316.0.150
Rom: MP_mt89_v9_iocean_ousheng_jb2_20130520-184014_zhongyeqing_PC
http://d-h.st/ESX
Iocean X7 Youth
I don't have the same problem but i flashed the latest version of official rom for iOcean x7 Youth : 03 july 2013 : and wtf no more internal sdcard only the rom stockage. So i can't download anything, i can't use camera .
On the official website, I read that before flashing the 20 may 2013 rom one and the 03 July 2013 one, your baseband version have to be 23/04 or higher( you have to flash the 23/04 official rom first). This is only avalaible for the YOUTH version.
So tomorrow i will try what i said below to see if i have internal sd card again.
noob question::: since the iocean x7 young and turbo are the same phones...only different clock rates...will flashing the firmware for turbo on iocean x7 young work??assuming that the mtk6589T and mtk6589 are the same chipset only different clock rates??
Micromax A116 (Cant flash Rom)Brick Problem Solved
tukulll said:
these are common problems when flashing MT65xx based phones,
ie : error 4008, 4xxx, 5xxx whatever those codes mean, no explanation after extensive search on google.
once I managed to flash this one phone successfully, but I don't know exactly what I did.
as long as I recall, I tried to delete the whole flashtool folders, re-extract them, let the phone cool down a bit
and oh, try to press volume up, or down button (varies on devices) while connecting to USB, once the flashing progress bar starts, release the button.
In the flashtool option, at the OPTIONS-->DA DOWNLOAD ALL-->, check WITHOUT BATTERY.
and in the option, DA DOWNLOAD ALL--> SPEED, check DO NOT SWITCH SPEED.
try flashing your phone without battery inserted, it works many times for me.
NOTE : BEWARE, flashing your MTK65xx based phone, sometimes this tool tried to REMOVE YOUR PHONE's IMEI information, so take caution !
I haven't managed how to prevent IMEI removal when flashing those phones, because I'm not a developer.
Hope this helps.
Click to expand...
Click to collapse
Thanks a lot. My Micromax a116 was brick. Now its alive.
Here I am with the same problem in a N920e... AND IT'S NOT MINE! :crying:
I'll have to pay it to the owner if I can't solve this:
DaniPhii said:
Here I am with the same problem in a N920e... AND IT'S NOT MINE! :crying:
I'll have to pay it to the owner if I can't solve this:
View attachment 2243401
Click to expand...
Click to collapse
Clearly: Wrong driver. I had also this error. SPflash tool did not readback. I did not flash anything! I fixed this by showing the nonpresent devices in devicemanagement (google for show nonpresent devices for explanation)
Go to com ports, and delete all mediatek drivers except preloader driver. Now start over. It can help if you choose the same usb port where you had success last time.
SP flash tool shows in the statusbar which driver it is using.
mistraller said:
Clearly: Wrong driver. I had also this error. SPflash tool did not readback. I did not flash anything! I fixed this by showing the nonpresent devices in devicemanagement (google for show nonpresent devices for explanation)
Go to com ports, and delete all mediatek drivers except preloader driver. Now start over. It can help if you choose the same usb port where you had success last time.
Click to expand...
Click to collapse
Yes, you got it
SP Flash Tool couldn't find my phone, but now it works
It's exactly a windoze driver problem.
Going to devicemanagement, in LAN-Devices I a had an Alcatel device,
chosing driver by hand and use the mtk usb driver, now Flashtool finds the phone
Thanks a lotttttttt....
shiv.kbh said:
Thanks a lot. My Micromax a116 was brick. Now its alive.
Click to expand...
Click to collapse
Thanks a lot man i unbricked my bolt a58 with this...thanks thanks...
hi
its anybody know how root Tablet Prestigio PMP 5101C Quad ? i try find some solutions online, i try use that advice but still not working , maybe some universal tools existing for various android system ??
thanks
Prestigio PMP 5101C Quad
dexxxZ said:
hi
its anybody know how root Tablet Prestigio PMP 5101C Quad ? i try find some solutions online, i try use that advice but still not working , maybe some universal tools existing for various android system ??
thanks
Click to expand...
Click to collapse
Today I root my Prestigio PMP 5101C tablet with this tool: http://www.kingoapp.com/
Root Prestigio PMP 5101C
csimion said:
Today I root my Prestigio PMP 5101C tablet with this tool: http://www.kingoapp.com/
Click to expand...
Click to collapse
Tried multiple times... Everytime it shows installing/connecting Device.
Then shows not connected.
USB Debugging Enabled/ Tried with Vol+ & Power Button method also
I really appreciated if u could tell me the steps u followed.
Thanks
Prestigio PMP 5101C Quad
naveeed said:
Tried multiple times... Everytime it shows installing/connecting Device.
Then shows not connected.
USB Debugging Enabled/ Tried with Vol+ & Power Button method also
I really appreciated if u could tell me the steps u followed.
Thanks
Click to expand...
Click to collapse
You don't have the correct drivers! Verify in device manager! Reinstall and after that the software works fine!
If still don't works, is better to try another PC for this operations!
I use this tutorial (czech language but i can translate)
http://translate.google.pl/translate?hl=pl&sl=cs&tl=en&prev=_dd&u=http%3A%2F%2Fandroidforum.cz%2Ftopic48703.html
i try this on soft 1.0.8 and work OK, so this is i think one way to Root that model
This tutorial on Czech works for me. Tnx!
Sent from my PMP5101C_QUAD using Tapatalk
I can confirm that this method works in the new 1.0.12 firmware also.
Here is how I did it.
1. Installed the RK3188 Generic ramdisk-only image CWM-based Recovery for Rockchip from Androtab.info See info in this post.
2. Downloaded the newest SuperSU zip and put it in internal storage
3. Booted into CWM by holding VOL+ and holding the power button for about 5-10sec, when release 4 linux penguins appeared.
4. Installed the supersu zip and rebooted.
M!KEY said:
1. Installed the RK3188 Generic ramdisk-only image CWM-based Recovery for Rockchip from Androtab.info See info in this post.
Click to expand...
Click to collapse
Which method did you use for step 1? In my case, neither method works, for the following reasons:
Stock recovery: 'not a valid update' error.
Root shell: current firmware is not rooted, so this is not an option.
CWM-based recovery: current recovery is stock, so this is not an option.
adb sideload: 'not a valid update' error.
rkflashtool: can rewrite recovery partition, but install-recovery.sh restores stock recovery on reboot, and cannot be disabled since current firmware is not rooted.
Any thoughts or ideas? Thanks in advance.
nikolam said:
Which method did you use for step 1?
Click to expand...
Click to collapse
Sorry for the late response, didnt notice the post.
I used RKAndroidTool and never had a problem with the recovery partition being rewritten.
Hope that helps.
I'm looking for the stock ROM for the vodafone 888. The phone won't boot because an update went wrong but I still have access to the recovery menu.
The current ROM version reported in the recovery is:
4.4.220.06.T3.140404.DVT49L.VF.GR
Thank you!
silverThe said:
I'm looking for the stock ROM for the vodafone 888. The phone won't boot because an update went wrong but I still have access to the recovery menu.
The current ROM version reported in the recovery is:
4.4.220.06.T3.140404.DVT49L.VF.GR
Thank you!
Click to expand...
Click to collapse
hi.
i am looking for the stock firmware for this device..anyone has it..? or recovery or custom rom..?
have u find a firmware?
my vodafone 888 does not boot any moore
fixed my phone today and all is well. The name of the phone is actually coolpad 7576u and the firmware i downloaded from http://www.yulong.com/product/produ...productBO.product.id=6504&productBO.menuId=30
the frogram to install this firmware is Coolpad Download Assistant Setup V1.86_140626 (google-it)
steps to install are simple.
1 download firmware
2 unzippit to *.CPB
3 start program
4 point program to the unzipped rom
5 connect phone to pc without battery (you remove the battery)
6 wait until is done
7 ENJOY
Did you install some drivers? Mine doesn't seem to work. I load the rom into Coolpad Download Assistant, I hit some button in Chinese, instinctively, then a bar loads to 100% and another one is at 0%. Stays like this forever nothing happens to the phone. It is in fastboot mode, battery off, plugged in with usb cable, adb drivers installed.
Later edit: I finally got it right. Reinstalled the drivers...
i have the same problem.any idea?
---------- Post added at 09:20 AM ---------- Previous post was at 08:55 AM ----------
i am looking for drivers
Install android sdk - now also integrated into Android studio - it should install google adb drivers automatically. Also give the PC and phone a restart after sdk is installed. Then you should have no problem hooking up the phone and yulong download assistant.
freakaleo said:
fixed my phone today and all is well. The name of the phone is actually coolpad 7576u and the firmware i downloaded from http://www.yulong.com/product/produ...productBO.product.id=6504&productBO.menuId=30
the frogram to install this firmware is Coolpad Download Assistant Setup V1.86_140626 (google-it)
steps to install are simple.
1 download firmware
2 unzippit to *.CPB
3 start program
4 point program to the unzipped rom
5 connect phone to pc without battery (you remove the battery)
6 wait until is done
7 ENJOY
Click to expand...
Click to collapse
100% worked for me. Now My Vodafone 888 is fully working.
Download flash Software from here...
Coolpad Download Assistant Setup V1.88
RO.maniac said:
Install android sdk - now also integrated into Android studio - it should install google adb drivers automatically. Also give the PC and phone a restart after sdk is installed. Then you should have no problem hooking up the phone and yulong download assistant.
Click to expand...
Click to collapse
Hey can you help me? I downloaded android SDK and now it recognizes the phone as an ADB Interface. Although on "Coolpad Download Assistant" it goes through the first 10% and then just skips to the end and a weird smile shows up with some chinese stuff.
What am I doing wrong? (I am connecting the phone to the pc withough battery it shows "Fastboot mode TA" on the screen) I'm using my country's rom (4.4.230.33.T3.140715.7576U.vf_pt) Tried with YGDP doesn't work as well...
Edit I'm using windows 8.1 tried on Windows 7 and it goes all the way up to 55%
firmware file needed
I have been searching around sites but unlucky, i cannot find firmware file for vodafone 888 smart 4 / coolpad 7576u firmware file. original site redirects to main page only by the above links. Please help me.
HI where is firmwere¿¿??
xbekoolx said:
I have been searching around sites but unlucky, i cannot find firmware file for vodafone 888 smart 4 / coolpad 7576u firmware file. original site redirects to main page only by the above links. Please help me.
Click to expand...
Click to collapse
gold_mobile said:
HI where is firmwere¿¿??
Click to expand...
Click to collapse
Here you have a .zip file containing the RO version of the stock 4.4.2 ROM for Vodafone 888. You can change the language afterwards, it's just a matter of bloatware apps for each country.
drive: https://goo.gl/o79jHC
vodafone 888
RO.maniac said:
Here you have a .zip file containing the RO version of the stock 4.4.2 ROM for Vodafone 888. You can change the language afterwards, it's just a matter of the bloatware apps that comes with in each country.
https://www.dropbox.com/s/ajp6sbie8eeqn8a/4.4.230.33.T3.140715.7576U.vf_ro.CPB.zip?dl=0
Click to expand...
Click to collapse
Thank you work perfect ! I flash phone with Coolpad Download Assistant
http://forum.xda-developers.com/android/help/stock-rom-vodafone-888-t3002958:)
Vodafone 888
Since I am a new member I can't post links so if anyone wants the greek rom just message me
Not really sure what the error is, but i guess it`s something wrong with the drivers.
After 3% i get the following (see the attached pic)
I used Android_adb-USB_UnifL_Driver_v1.17
from here: http://leshcatlabs.net/downloads_usb_unifl/
tintome said:
Not really sure what the error is, but i guess it`s something wrong with the drivers.
After 3% i get the following (see the attached pic)
I used Android_adb-USB_UnifL_Driver_v1.17
from here: http://leshcatlabs.net/downloads_usb_unifl/
Click to expand...
Click to collapse
I had this problem but at some higher percentage. I just kept retrying and it finally worked. I don't remember if I messed with the drivers anymore once it started. You should uninstall every android/google driver you have, reboot, install again.
Device manager looks fine tough, bootloader interface.
///jos Gâdea & Co///
RO.maniac said:
Did you install some drivers? Mine doesn't seem to work. I load the rom into Coolpad Download Assistant, I hit some button in Chinese, instinctively, then a bar loads to 100% and another one is at 0%. Stays like this forever nothing happens to the phone. It is in fastboot mode, battery off, plugged in with usb cable, adb drivers installed.
Later edit: I finally got it right. Reinstalled the drivers...
Click to expand...
Click to collapse
can u provide a link with the drivers for Vodafone 888? multumesc
Custom rom vodafone 888 ?
domino_xxi said:
can u provide a link with the drivers for Vodafone 888? multumesc
Click to expand...
Click to collapse
uninstall every google/android driver you have, then install android studio, it bundles the drivers, easy. or you can search for some fastboot/adb drivers little package.
I no longer have this phone. sorry for being late
Lefter1s said:
Since I am a new member I can't post links so if anyone wants the greek rom just message me
Click to expand...
Click to collapse
hi can you send me the greek rom please?
Unbrick Oppo R5
Since oppo forums support is minimal and a lot of Oppo R5/ R5s owners are facing difficulties flashing new rom and since Oppo is unbrickable here are a guide as posted to oppo forum members by the member Ricky.
I had clear instructions not to post this tool anywhere BUT THEY DON’T SUPPORT ANY DEVICE and I have to break my promise as they broke any kind of support.
This community (XDA) is to help all members
The tool works with windows 10 and not only with windows 7 as they mention in their instructions
Packages you have to download first
1- Firmware ColorOS https://www.partage-facile.com/LM6Y85FF7Z/r8106ex_11_a.16_150806.tar.bz2.html
File Name: R8106EX_11_A.16_150806.tar.bz2
Size: 1.4GB
MD5: F85ED63BA637B559976D9BFF0AED0187
2- Instructions:
https://drive.google.com/file/d/0B3AWkNVCRSNVZGNRUE1rQW5YOFk/view?sid=
3- Driver : http://en.oppo.com/downloads/firmware/driverForFind5.rar
Mirror for driver http://www109.zippyshare.com/v/MEMiPlOv/file.html
Attention
a-Unbrick tool will wipe all data on your device including photos and music etc, if do you want to reserve your data please make o back up on your PC
b- After unbrick the first time power up take around 5-15 minutes
c- The most important things are to install the driver. For windows 10 you must enable unsigned signature verification through windows advanced settings (google it) prior driver installation.
d- In order to shut phone completely hold the power button for 8 -10 secs
How to use the tool
I tried to use the tool and the files you provided to revive my Oppo R5, but the layout of the tool which you provided is different from the one in the picture (you gave in the links). It is also in foreign characters so difficult to choose with option to tick.
In fact, the version that came with you package does not have as many option as the one in the picture. My confusion actually starts from when the program starts. There is a drop down menu to chose from a long list of 14005 to 15065. Which one do I choose for Oppo R5?
As for the qualcomm port, the device manager identified my phone on port 9006, whereas the picture shows 9008.
Please help me. I really need to get this phone to work. The phone would not do any thing is the buttons are pressed individually or in combination, other than being detected by the computer and enumerated in the device manager.
Many thanks in advance for your help.
amadoro said:
I tried to use the tool and the files you provided to revive my Oppo R5, but the layout of the tool which you provided is different from the one in the picture (you gave in the links). It is also in foreign characters so difficult to choose with option to tick.
In fact, the version that came with you package does not have as many option as the one in the picture. My confusion actually starts from when the program starts. There is a drop down menu to chose from a long list of 14005 to 15065. Which one do I choose for Oppo R5?
As for the qualcomm port, the device manager identified my phone on port 9006, whereas the picture shows 9008.
Please help me. I really need to get this phone to work. The phone would not do any thing is the buttons are pressed individually or in combination, other than being detected by the computer and enumerated in the device manager.
Many thanks in advance for your help.
Click to expand...
Click to collapse
For R5 use 14016.
mermigas said:
For R5 use 14016.
Click to expand...
Click to collapse
Thank you for your reply. I tried to use the tool again, but there is not option for 14016. The full list is here: 14005, 14006, 14023, 14037, 14039, 14040, 14041, 14042, 14043, 14045, 14046, 14047, 14050, 14051, 14052, 14061, 14062, 14065, 14068, 140083, 14085, 14097, 14098, 15005, 15005_4G, 15006, 1500_4G, 15007, 15007_4G, 15011, 15012, 15013, 15018, 15057, 15061, 15065.
The flash tool that I am using is V1.5. Is is possible that I am using a wrong version for what I need to do?
Many thanks for your attention.
amadoro said:
Thank you for your reply. I tried to use the tool again, but there is not option for 14016. The full list is here: 14005, 14006, 14023, 14037, 14039, 14040, 14041, 14042, 14043, 14045, 14046, 14047, 14050, 14051, 14052, 14061, 14062, 14065, 14068, 140083, 14085, 14097, 14098, 15005, 15005_4G, 15006, 1500_4G, 15007, 15007_4G, 15011, 15012, 15013, 15018, 15057, 15061, 15065.
The flash tool that I am using is V1.5. Is is possible that I am using a wrong version for what I need to do?
Many thanks for your attention.
Click to expand...
Click to collapse
Sorry mistyped
14061
Also there is an English Version for the flashing tool here
https://forum.xda-developers.com/r7-plus/help/oppo-r7plusm-msm-tool-t3313759.
Just download it and copy to the folder that there is the Chinese tool
For me the Chinese version works fine
Also there is a same guide here
http://community.oppo.com/en/forum.php?mod=viewthread&tid=51497&extra=
mermigas said:
Sorry mistyped
14061
Also there is an English Version for the flashing tool here
https://forum.xda-developers.com/r7-plus/help/oppo-r7plusm-msm-tool-t3313759.
Just download it and copy to the folder that there is the Chinese tool
For me the Chinese version works fine
Also there is a same guide here
http://community.oppo.com/en/forum.php?mod=viewthread&tid=51497&extra=
Click to expand...
Click to collapse
Thank you so much. it worked. Not my Oppo r5 is back alive.
Where is the download?
Is it normal that when I hit the download link there appear aliexpress??
I thought I had bricked my R5 but while trying to follow this guide it wasn't showing up in the "Ports" section of the Device Manager. I found that my phone still had fastboot, so I used it to install latest TWRP and then the repair rom. And now my phone is finally back to working condition! I hadn't modified in any way my phone and one day it got stuck at the logo. Anyway, thanks for the guide Mermigas!
anyone mirror pls
mega
[email protected] said:
anyone mirror pls
Click to expand...
Click to collapse
[dead link]
If it asks for a key leave it blank
Kushracer said:
https://mega.nz/#F!q8YFEJyB
If it asks for a key leave it blank
Click to expand...
Click to collapse
No asking for decryption key
mirror
Uploading here: R5S Unbrick Tools
Please help
After i have done all those instructions: my phone was completely dead(no more display and can't use any buttons).
Please what should i do for revive that.
Link Broken
cpuld you re-load the link of Color Os firmware please?
Its not valid now =(
Number for R5S?
Hi, I tried the 14061 for my OPPO R5S. Unfortunately it did not work. Now the phone is not starting.. help? Should I use another number?
Hi folks,
Today it's a great day for me : I have successfully patched the kernel to have a 100% working TWRP 3.2.1 for our Maze Alpha 4G.
I have port a Jemmini build for Bluboo S1 and I have patch the kernel to have a working touch panel
I have followed this Thead
For the Maze Alpha 6G version, you can test it and tell me please.
How to flash:
I Fastboot method (must unlock device) :
1- Reboot your phone in bootloader mode : adb reboot bootloader or phone off, press and hold at the same time POWER and Vol+ buttons
2- Connect your phone to your computer with adb/fastboot already installed
3- Unlock your bootloader : fastboot oem unlock (it will erase you data, only data)
4- Flash the recovery : fastboot flash recovery recovery_maze_alpha_4G_twrp-321.img
II SPFlashTool method (no need to unlock device) :
1- Download latest version of SPFlashTools.
2- Execute it and load the provided scatter (the recovery image must be in the same folder as the scatter and must be renamed to recovery.img) then press "Dowbload" button
3a- windows SPFlashTools users : phone off, press VOL+ and connect it to your PC (running SPFlashTool and waiting for phone connetion)
3b- linux SPFlashTools users : phone off and connected to PC , press VOL+ and POWER while your PC is running SPFlashTool (with sudo) and waiting for phone connetion.
Update : you can found here the latest version: TWRP 3.3.0 for MAze Alpha 4Ghttps://github.com/dreambo/android_device_maze_alpha/releases/tag/3.3.0
have a nice day.
Works great on Maze alpha 4G. Thanks.
But I forgot to save original recovery...
super_sonic said:
Works great on Maze alpha 4G. Thanks.
But I forgot to save original recovery...
Click to expand...
Click to collapse
You can get the original recovery from the stock rom designed for SPFlashTool, provided here
dreambo said:
You can get the original recovery from the stock rom designed for SPFlashTool, provided here
Click to expand...
Click to collapse
Thanks. Can you share stock recovery.img, if you have it? I have recovery-verified.img from V05 but I don't know if there is a new update and if size is correct: 11,54MB. Your TWRP recovery has got a size of 14.24MB...
Can you make a small procedure on how to install it? Will help many nOOb's out.
And people need to report back issues and successes !!!! Again I see many questions and people with issues that we seniors try to help out with that end up in no more response which to me is not done and not helping others.
I have a 6GB version that I could test on but at the moment I am using it for other stuff and I can't risk bricking it this week.
Would finally love to start some stuff happening on this phone.
Ok in the process of doing so on my 6GB/64GB version.
edit : congratz I now have a 'phone' that can only go into TWRP . Should have never ever done this!
Says no OS installed ... really nice
Edit 2: after hours wasted was able to get your zipped rom on the Maze but I got no boot with that TWRP, so flashed recovery-verified.img from the 6GB rom from Alpha I had downloaded ... It would then start up but show 4GB out of 6GB. No good but at least all the rest seemed to work. All other effort to get it going back with the proper kernel etc resulted in frustration.
So now to flash the official rom back via their tool... that one got me really frustrated and was completely my fault that I couldn't figure it out. But you know angry, frustrated, must get it back to work, can do this ... After all these years of toying with phones we are so used to pressing 'power and vol+ or vol-' together to make something work. Now in the end I re-read the manual again and saw that you only have to push vol+ and NOT vol+ and power together or it wont go in the mode it should go to make it flash!!
In case this happens : The best advice I can give to people is to download the proper MTK drivers. Search for vcom drivers for MTK and you will find.
Print out the instructions and mark every step you do to the letter. The flashing itself only takes like 3 or 4 minutes
lukesan said:
Ok in the process of doing so on my 6GB/64GB version.
edit : congratz I now have a 'phone' that can only go into TWRP . Should have never ever done this!
Says no OS installed ... really nice
Edit 2: after hours wasted was able to get your zipped rom on the Maze but I got no boot with that TWRP, so flashed recovery-verified.img from the 6GB rom from Alpha I had downloaded ... It would then start up but show 4GB out of 6GB. No good but at least all the rest seemed to work. All other effort to get it going back with the proper kernel etc resulted in frustration.
So now to flash the official rom back via their tool... that one got me really frustrated and was completely my fault that I couldn't figure it out. But you know angry, frustrated, must get it back to work, can do this ... After all these years of toying with phones we are so used to pressing 'power and vol+ or vol-' together to make something work. Now in the end I re-read the manual again and saw that you only have to push vol+ and NOT vol+ and power together or it wont go in the mode it should go to make it flash!!
In case this happens : The best advice I can give to people is to download the proper MTK drivers. Search for vcom drivers for MTK and you will find.
Print out the instructions and mark every step you do to the letter. The flashing itself only takes like 3 or 4 minutes
Click to expand...
Click to collapse
Haha I did the same exact thing..and managed to get it working after flashing it with the spflash tool but the trick is if you have Windows 10 latest version you won't be able to do this..at least I couldn't because of driver incompatibility so in my case:
1 I installed Windows 7 and installed mtk drivers for spflash tool
2.booted into twrp
2.1 if you can't boot into twrp or it doesn't turn on you can still try this
3.Start sp flash tool and download the zip the one(in case of trouble)that the moderator published
4. Load the scatter file and make sure that all of the files and the scatter are in the same folder.
5.click download and leave it like that
6.plug in your phone in fastboot if you can't try one of the following
6.1 just plug it in turned off and monitor spflash tool status
6.2 plug it in holding volume up key (just volume not power)
6.3 in twrp go to boot and boot into bootloader
And the tool should do the rest
If all else fails check the drivers one more time
After all that if you are feeling adventurous flash twrp one more time and do not factory reset through twrp ! Because that was the problem in my case and after you unlock bootloader boot your phone and go through the setup without setting the password because twrp will be locked.
Good luck.
frumac96 said:
Haha I did the same exact thing..and managed to get it working after flashing it with the spflash tool but the trick is if you have Windows 10 latest version you won't be able to do this..at least I couldn't because of driver incompatibility so in my case:
1 I installed Windows 7 and installed mtk drivers for spflash tool
2.booted into twrp
2.1 if you can't boot into twrp or it doesn't turn on you can still try this
3.Start sp flash tool and download the zip the one(in case of trouble)that the moderator published
4. Load the scatter file and make sure that all of the files and the scatter are in the same folder.
5.click download and leave it like that
6.plug in your phone in fastboot if you can't try one of the following
6.1 just plug it in turned off and monitor spflash tool status
6.2 plug it in holding volume up key (just volume not power)
6.3 in twrp go to boot and boot into bootloader
And the tool should do the rest
If all else fails check the drivers one more time
After all that if you are feeling adventurous flash twrp one more time and do not factory reset through twrp ! Because that was the problem in my case and after you unlock bootloader boot your phone and go through the setup without setting the password because twrp will be locked.
Good luck.
Click to expand...
Click to collapse
Wait a sec., missing a couple of things here.
1) Do you have a 6GB ?
2) In case you have a 6GB did you manage to get it working, rooted and all?
Your point 6) well I flashed mine on the latest 64bit win10 ... but.... if the phone is off and you connect the usb cable my phone tried to boot up either in twrp with no com port. Also booting it in bootloader doesn't make the comport visible so you can't flash.
The only way to make mine visible for the flashtool was to press vol+ and then connect the usb cable.
Btw I am glad someone finally responds and spreads information. A very good post! Your first 'thanks' well deserved!
I wonder where the guys are that I was trying to help. Did they throw their phones away or something? Sharing is caring I thought.
I want to root mine to alter the camera settings and the media xml file. I find it strange that our sensor, which is the same as in my wife's Xiaomi's, takes seriously bad pictures.
lukesan said:
Wait a sec., missing a couple of things here.
1) Do you have a 6GB ?
2) In case you have a 6GB did you manage to get it working, rooted and all?
Your point 6) well I flashed mine on the latest 64bit win10 ... but.... if the phone is off and you connect the usb cable my phone tried to boot up either in twrp with no com port. Also booting it in bootloader doesn't make the comport visible so you can't flash.
The only way to make mine visible for the flashtool was to press vol+ and then connect the usb cable.
Btw I am glad someone finally responds and spreads information. A very good post! Your first 'thanks' well deserved!
I wonder where the guys are that I was trying to help. Did they throw their phones away or something? Sharing is caring I thought.
I want to root mine to alter the camera settings and the media xml file. I find it strange that our sensor, which is the same as in my wife's Xiaomi's, takes seriously bad pictures.
Click to expand...
Click to collapse
Sorry forgot to mention I have a 4 GB version but since maze is not providing the roms on their website any further development will be limited..thank God for dreambo he is the only guy doing any work here and like you said nobody is responding to any questions asked..shame really because maze is a great phone with a terrible camera..which drivers did you use on Windows 10? because I tried a hundred of them and non of them recognize my phone..and in adb I can run the command fastboot reboot bootloader but after reboot none of the commands are working .
And yes I did manage to install twrp and root using magisk and I to hope that all those other guys didn't brick their phones
frumac96 said:
Sorry forgot to mention I have a 4 GB version but since maze is not providing the roms on their website any further development will be limited..thank God for dreambo he is the only guy doing any work here and like you said nobody is responding to any questions asked..shame really because maze is a great phone with a terrible camera..which drivers did you use on Windows 10? because I tried a hundred of them and non of them recognize my phone..and in adb I can run the command fastboot reboot bootloader but after reboot none of the commands are working .
And yes I did manage to install twrp and root using magisk and I to hope that all those other guys didn't brick their phones
Click to expand...
Click to collapse
This is the filename I used on Windows 10 VCOM Drivers (All MTK Devices & All Windows OS version).zip I think I downloaded it from XDA somewhere.
Also something you must know https://www.howtogeek.com/167723/ho...8.1-so-that-you-can-install-unsigned-drivers/
Another thing I experienced is that one USB connector is not the other one on a pc. Always connect it to the ones directly on the main board next to the other device outputs like audio etc. and preferably not go through ones that have been extended via a cable like the ones on top of the casing or so. Also a must have application is usbdeview.
Well should be easy to get it going if you can boot it into 'fastboot' then you can try as much as you want to. But djeeeeezzzz the letters are very small when you boot it with a power+volume up . Also check that volume up will toggle between 'fastboot', 'recovery' and 'normal start' and volume minus will select it, not the power button which would be more logical to me.
I might have another go at trying to get it working on my 6GB but it involves having a lot of time and knowing that I will get frustrated. Installing all apps and settings is also a time consuming thing. Once you have TWRP on it it all becomes easy to backup. So many things to test or try.
Maybe dreambo has an idea on how to get mine up to a 6GB one as it is probably only indicated in the kernel.
Anyway I will continue to write down my progress.
Ok more frustration. Done multiple things to try to get this running. It's good to know that the original rom is easy to install again after practice.
Take 1: Try to install clean 6GB rom and immediately install TWRP.
Results: Dreambo forgot 1 step and that is to allow OEM unlock in the developer options. If you do the adb command to unlock press volume up and it will unlock (very hard to see, very small letters on the display in bootloader mode)
Well TWRP starts but immediately I get a message 'mount decrypt data password' which I tried a couple of things but no go. Also googled... different solutions but always ending in a bootloop to TWRP
A possible solution that I read was to create a startup pin .... no go 'pin not valid'
Take 2: Take all the rom files and change the scatter file with the one dreambo provided.... Thought it was successful but ended up with the same Chinese recovery. Trying to figure out why since the filename was correct like indicated in the scatter file. Came to the conclusion that the original file was/is called recovery-verified.img and not recovery.img. Really really strange this one as in the original scatter file it also points to recovery.img. So this one I will have to investigate. Renaming the TWRP file to recovery-verified.img lead to a error during the initial scan of the flashtool.
So moral of the story is that I am back on square 1 and lost 2 hours today (plus putting all apps and settings back) today.
I get a bit lost, is this TWRP method only working with the 6GB or also with the 4GB version?
CYberdog11 said:
I get a bit lost, is this TWRP method only working with the 6GB or also with the 4GB version?
Click to expand...
Click to collapse
There is no fundamental difference between 6G and 4G version.
It must works in boat versions.
If you have issues with SPFlashTool try this (no need to install any drivers on Windows 10) :
Put the preloader.bin (found in the rom package designed for SPFlashTool) in the same folder as the recovery.img without checking it the list of partitions (only recovery must be checked) and click on Download to flash the recovery, as usual.
Perhaps SPFlashTool cannot read by himself the preloader in the EMMC, and we must provide it.
The linux version of SPFlashTool not works at this moment, I do not know why
With the SPflashtool I always get the error:
ERROR:STATUS_DA_HASH_MISMATCH (0xC0070004)
HINT
CYberdog11 said:
With the SPflashtool I always get the error:
ERROR:STATUS_DA_HASH_MISMATCH (0xC0070004)
HINT
Click to expand...
Click to collapse
From another thread:
mmakdz said:
google translate
Hello
I had the same problem, (error BROM ERROR: STATUS_DA_HASH_MISMATCH)
what I did: I use Windows 7 System
1- clear all drivers for smartphones with "usbdeview-2-17"
2- install Drivers "Drivers_Auto_Installer_v1.1236.00"
3- install "PdaNetA4170"
4- use "SP_Flash_Tool_v5.1708_Win" to flash the rom. first flash the preloader alone and then flash the others.
the problem was the bad installation of the drivers, after that everything went well for me.
try it can work for you too.
the mentioned software is easy to find on google
Click to expand...
Click to collapse
dreambo said:
There is no fundamental difference between 6G and 4G version.
It must works in boat versions.
If you have issues with SPFlashTool try this (no need to install any drivers on Windows 10) :
Put the preloader.bin (found in the rom package designed for SPFlashTool) in the same folder as the recovery.img without checking it the list of partitions (only recovery must be checked) and click on Download to flash the recovery, as usual.
Perhaps SPFlashTool cannot read by himself the preloader in the EMMC, and we must provide it.
The linux version of SPFlashTool not works at this moment, I do not know why
Click to expand...
Click to collapse
If there is no difference between the 4GB and 6GB then why did I literally spend days on trying this and documenting what happened?
lukesan said:
If there is no difference between the 4GB and 6GB then why did I literally spend days on trying this and documenting what happened?
Click to expand...
Click to collapse
Do you have the 2 versions of the phone and do you have notice any difference of the flashing procedure ?
dreambo said:
Do you have the 2 versions of the phone and do you have notice any difference of the flashing procedure ?
Click to expand...
Click to collapse
I only have the 6GB version of the Maze Alpha. But you wrote that the procedure should work for both versions. I think I wrote down what happened with mine if I installed TWRP.
I tried both the 'regular' flashing and then the full rom install with the trick to put the files in the directory and rename but both ended up as I've written in my previous post.
lukesan said:
I only have the 6GB version of the Maze Alpha. But you wrote that the procedure should work for both versions. I think I wrote down what happened with mine if I installed TWRP.
I tried both the 'regular' flashing and then the full rom install with the trick to put the files in the directory and rename but both ended up as I've written in my previous post.
Click to expand...
Click to collapse
From times to times, I notice trouble with flashing using SPFlashTools.
First (when I post my first post relating of the root) I use the linux version : no issues it works perfect, no need of any drivers!
Actually, no way to have it working on linux, why I do not know!
I have tried Windows 10 and I notice that we have to provide the preloader to have it working, as I write in my post.
In theory, and only in theory, the SPFlashTool must works the same manner in any phone with a Mediatek SOC.
But in reality, we have notice that with exactly the same phone the flashing procedure works for some users and not for others!
SPFlashTool is a very capricious software, there is no warranty to have it 100% working in any platform, even with the same OS.
dreambo said:
From times to times, I notice trouble with flashing using SPFlashTools.
First (when I post my first post relating of the root) I use the linux version : no issues it works perfect, no need of any drivers!
Actually, no way to have it working on linux, why I do not know!
I have tried Windows 10 and I notice that we have to provide the preloader to have it working, as I write in my post.
In theory, and only in theory, the SPFlashTool must works the same manner in any phone with a Mediatek SOC.
But in reality, we have notice that with exactly the same phone the flashing procedure works for some users and not for others!
SPFlashTool is a very capricious software, there is no warranty to have it 100% working in any platform, even with the same OS.
Click to expand...
Click to collapse
The thing is that I have no issue with flashing the software as I can perfectly flash the original rom. The problem is that when flashing the TWRP file, in both options by the way, so also via method 1, I get a boot loop.