Related
I read the post on http://forum.xda-developers.com/showthread.php?t=2380700 but it is not working...:crying::crying:
Firstly I was having SamFlare V5 installed on my phone with CWM 6.0.3.0 then i tried to update to CWM 6.0.4.4 which was not working then again i replaced with older one. Now SIM cards are not getting detected and SIM MANAGEMENT from settings in disabled and when i checked in ENGINEERING MODE in CDS INFORMATION i found that RADIO is TURNED OFF...
Then i tried to install Canvas 4 Stock ROM but same problem persists...:crying::crying::crying:
Plz Help!!!
TIA...
nimishshah1508 said:
I read the post on http://forum.xda-developers.com/showthread.php?t=2380700 but it is not working...:crying::crying:
Firstly I was having SamFlare V5 installed on my phone with CWM 6.0.3.0 then i tried to update to CWM 6.0.4.4 which was not working then again i replaced with older one. Now SIM cards are not getting detected and SIM MANAGEMENT from settings in disabled and when i checked in ENGINEERING MODE in CDS INFORMATION i found that RADIO is TURNED OFF...
Then i tried to install Canvas 4 Stock ROM but same problem persists...:crying::crying::crying:
Plz Help!!!
TIA...
Click to expand...
Click to collapse
Watch this video tutorial - http://youtube.com/watch?v=8ZEVDwcCVzY
Sent from my Micromax A116 using XDA Premium 4 mobile app
RE:
I have watched this video and tried same but problem is in his case the radio is on but in my case radio is off and sim state is also not ready as shown in previously attached image!!! and while typing list box is not also opening and when i click on send AT command android will toast "AT command is failed to send"
RE:
I have watched this video and tried same but problem is in his case the radio is on but in my case radio is off and sim state is also not ready as shown in previously attached image!!! and while typing list box is not also opening and when i click on send AT command android will toast "AT command is failed to send"
[solved] radio off problem in mtk devices
hi, atlast i have found a solution of the "radio off" problem. It will definitely work...........just follow my instructions............
1. First of all you need to have the stock rom for your phone which you can easily find by googling.
2. Now run the sp flash tool in your pc.
3. click on the "scatter loading" botton and select the .txt file by browsing your downloaded stock rom.
4. Now click the "format" option on top of the flash tool.
5. Now switch off your phone and connect it to your pc via usb cable and press the up/down volume bottons for detecting.
6. once detected, your phone will be formatted.
7. now disconnect your phone from pc and close the sp tool. Then repeat the steps from 2 to 3.
8. Now click on the "download" option on top of the sp flash tool.
9. and again connect your phone and make it detected in the same process described earlier.
10. once the flashing is completed you will see a green o .
11. now disconnect your phone and switch it on, and the radio of your phone will be turned on.
12. also you need to rewrite the imei nos going to engineer mode by simply dialing *#3646633#*#*
Guys, I worked hard to find this solution so, if this process works please make a little donation to my sbi account 30449335478
Can you made back up of your IMEI ? Onceday I Already Same Question.before doing anythings.fortunately i backed up my IMEI.So if You not backed up.then no answer for your questions.
Puspendu said:
hi, atlast i have found a solution of the "radio off" problem. It will definitely work...........just follow my instructions............
1. First of all you need to have the stock rom for your phone which you can easily find by googling.
2. Now run the sp flash tool in your pc.
3. click on the "scatter loading" botton and select the .txt file by browsing your downloaded stock rom.
4. Now click the "format" option on top of the flash tool.
5. Now switch off your phone and connect it to your pc via usb cable and press the up/down volume bottons for detecting.
6. once detected, your phone will be formatted.
7. now disconnect your phone from pc and close the sp tool. Then repeat the steps from 2 to 3.
8. Now click on the "download" option on top of the sp flash tool.
9. and again connect your phone and make it detected in the same process described earlier.
10. once the flashing is completed you will see a green o .
11. now disconnect your phone and switch it on, and the radio of your phone will be turned on.
12. also you need to rewrite the imei nos going to engineer mode by simply dialing *#3646633#*#*
Guys, I worked hard to find this solution so, if this process works please make a little donation to my sbi account 30449335478
Click to expand...
Click to collapse
Great work. My problem solved :good:
Puspendu said:
hi, atlast i have found a solution of the "radio off" problem. It will definitely work...........just follow my instructions............
1. First of all you need to have the stock rom for your phone which you can easily find by googling.
2. Now run the sp flash tool in your pc.
3. click on the "scatter loading" botton and select the .txt file by browsing your downloaded stock rom.
4. Now click the "format" option on top of the flash tool.
5. Now switch off your phone and connect it to your pc via usb cable and press the up/down volume bottons for detecting.
6. once detected, your phone will be formatted.
7. now disconnect your phone from pc and close the sp tool. Then repeat the steps from 2 to 3.
8. Now click on the "download" option on top of the sp flash tool.
9. and again connect your phone and make it detected in the same process described earlier.
10. once the flashing is completed you will see a green o .
11. now disconnect your phone and switch it on, and the radio of your phone will be turned on.
12. also you need to rewrite the imei nos going to engineer mode by simply dialing *#3646633#*#*
Guys, I worked hard to find this solution so, if this process works please make a little donation to my sbi account 30449335478
Click to expand...
Click to collapse
Really thank u man, i had this problem with my bq e5 fhd and now solve it. Thank u!!!!! Greetings from spain!!
radio of zenfone 2 laser fix
i have zenfone 2 laser wich radio was off i cannot turn on radio please help
Puspendu said:
hi, atlast i have found a solution of the "radio off" problem. It will definitely work...........just follow my instructions............
1. First of all you need to have the stock rom for your phone which you can easily find by googling.
2. Now run the sp flash tool in your pc.
3. click on the "scatter loading" botton and select the .txt file by browsing your downloaded stock rom.
4. Now click the "format" option on top of the flash tool.
5. Now switch off your phone and connect it to your pc via usb cable and press the up/down volume bottons for detecting.
6. once detected, your phone will be formatted.
7. now disconnect your phone from pc and close the sp tool. Then repeat the steps from 2 to 3.
8. Now click on the "download" option on top of the sp flash tool.
9. and again connect your phone and make it detected in the same process described earlier.
10. once the flashing is completed you will see a green o .
11. now disconnect your phone and switch it on, and the radio of your phone will be turned on.
12. also you need to rewrite the imei nos going to engineer mode by simply dialing *#3646633#*#*
Guys, I worked hard to find this solution so, if this process works please make a little donation to my sbi account 30449335478
Click to expand...
Click to collapse
Man many thanks for your post finally got it working
HI
I have unfortunately flashed a rom from another phone (ZTE NUBIA Z5 mini), now my screen is black, but I can hear that the phone is working; sound when turn on/off phone and sound when I adjust sound level. I have tried to use fastboot mode, but phone will not boot into fastboot, only into ADB mode where my device are listed. Due to my “ROM” fault, USB debugging mode is not turned on, so many of the tools I have tried does not work. Is the phone totally bricked or is there some possibilities that I can try?? Help will be much appreciated.
ROM is root, when I did a test with ONECLICK root, tools tells me that phone is root, so something are working just not my screen.
PS I cant remove battery, it is built into the phone
Basmand
UPDATE: HELP PLEASE
By a luck I was able to install a new ROM "ZTE-nubia-Z5-cm-10.2-20140115-" but be course I didn't have any picture on the screen I may have touch the phone, because the rom is booting up, but don't work probably due to uncompleted install. Now I have picture on the screen, I can go to recovery and bootloader mode, but still no picture on the screen in these 2 modes. I can use adb but not fastboot maybe driver issue, I have tried nearly every driver on the internet including SDK manager tool.
So is there any change that I can flash via adb mode?
Basmand
basmand said:
HI
I have unfortunately flashed a rom from another phone (ZTE NUBIA Z5 mini), now my screen is black, but I can hear that the phone is working; sound when turn on/off phone and sound when I adjust sound level. I have tried to use fastboot mode, but phone will not boot into fastboot, only into ADB mode where my device are listed. Due to my “ROM” fault, USB debugging mode is not turned on, so many of the tools I have tried does not work. Is the phone totally bricked or is there some possibilities that I can try?? Help will be much appreciated.
ROM is root, when I did a test with ONECLICK root, tools tells me that phone is root, so something are working just not my screen.
PS I cant remove battery, it is built into the phone
Basmand
UPDATE: HELP PLEASE
By a luck I was able to install a new ROM "ZTE-nubia-Z5-cm-10.2-20140115-" but be course I didn't have any picture on the screen I may have touch the phone, because the rom is booting up, but don't work probably due to uncompleted install. Now I have picture on the screen, I can go to recovery and bootloader mode, but still no picture on the screen in these 2 modes. I can use adb but not fastboot maybe driver issue, I have tried nearly every driver on the internet including SDK manager tool.
So is there any change that I can flash via adb mode?
Basmand
Click to expand...
Click to collapse
Solved this problem? If not, write to the Skype oleg_gutov. I can help you
olezhek1975 said:
Solved this problem? If not, write to the Skype oleg_gutov. I can help you
Click to expand...
Click to collapse
Hi
Thanks for offering your help, my phone is still bricked! I have searched on Skype and there are more than one person with the name oleg_gutov
My Skype name is Michael.jensen123
Basmand
I have a problem connecting to Blutooth. I bought a car 2DIN radio for android. My phone turns on blutooth and connects to a call without a phone call. My radio with other smartphones connects seamlessly, has a problem with my phone only. My phone connects properly with the handsfree, with the speaker and other devices, just does not want to connect with my radio. I had an original Image, now I changed to MUI, but it is the same.
Is it really so difficult to repair if no one else has encountered such a problem?
Help
I'm fighting for 3 days and I do not know where I'm making a mistake. I was looking for a solution for bluetooth connection with 2DIN radio. I found the image in EUI 5.8 15S still works well. I had TWRP installed so there was no problem, I found the image I installed. Unfortunately bluetooth does not work. I wanted to install MIUI so I downloaded the image and here my problem starts. I am in TWRP unfortunately I can not access the phone memory. I will start everything from scratch. I will do everything as described:
I have ADB installed on my PC
on the phone I enter the system developer set
in the directory where I have downloaded twrp with shift PPM and the command window opens
adb devices command - correct answer
adb reboot command bootloader - telefin into bootloader mode
fastboot oem unlock command - correct answer
fastboot flash twrp twrp.img - install twrp
button + volume and power - twrp mode
in the twrp install button - and again the same I can not access the memory.
If I choose the memory, I have 0 mg memory and OTG memory
What I do is not where the error is.
wojt_wc said:
Help
I'm fighting for 3 days and I do not know where I'm making a mistake. I was looking for a solution for bluetooth connection with 2DIN radio. I found the image in EUI 5.8 15S still works well. I had TWRP installed so there was no problem, I found the image I installed. Unfortunately bluetooth does not work. I wanted to install MIUI so I downloaded the image and here my problem starts. I am in TWRP unfortunately I can not access the phone memory. I will start everything from scratch. I will do everything as described:
I have ADB installed on my PC
on the phone I enter the system developer set
in the directory where I have downloaded twrp with shift PPM and the command window opens
adb devices command - correct answer
adb reboot command bootloader - telefin into bootloader mode
fastboot oem unlock command - correct answer
fastboot flash twrp twrp.img - install twrp
button + volume and power - twrp mode
in the twrp install button - and again the same I can not access the memory.
If I choose the memory, I have 0 mg memory and OTG memory
What I do is not where the error is.
Click to expand...
Click to collapse
When you start it, is TWRP asking for a password? If it does, that means your phone is encrypted, which, for example, is the default for Indian firmwares. It's a bug, but not the end of the world. You have to hit cancel at the password prompt and restart recovery. It will eventually start without asking for a password and then you'll have access to the internal memory. Once, I had to restart TWRP about 10 times until this worked, so you have to be patient.
Thanks a lot. Actually I had to start again and it was OK. But now I have a bigger problem. I downloaded the picture MIUI 9. The installation ran smoothly. MIUI 9 has been installed but I can not take over the configuration. Even though the SIM card is inserted it does not see it. Can not find no IMEI. Can not set up MI Acccount. The phone is hot all the time and it's still on Mi Account. Can you stop it? Can I upload another image?
Yesterday at a late hour I managed to run everything on a regular basis on SmailSUI. I reinstalled the memory cleaner and it works fine. All the time I'm waiting for MIUI 9. As you work on this image you can check if BT is working properly. At me mixed with different images from this began. So far I have not found a system that works properly BT. When connected to another Android BT connects without a phone. You can not receive or call BT.
Thanks again for your help.
Hello guys, and today i'll be sharing a great post with you guys that how can you use Google Pixel 2's Portrait effect on Your Snapdragon 400 Series Powered android devices, (as of now i have tested on Redmi 5A) and it working super fine, like i am able to capture Front Cam Bokeh shots, and rear cam portrait images, so in this post i'll show you how to enable or use Google Pixel 2's Modded Camera on Your Redmi 5A
so first of all i would like to thanks Senior XDA developers @Arnova8G2 and @miniuser123 for improving these kind of port.
Disclaimer:
guys the process requires Root Access to enable Camera2API, so it will void your warranty, and also if you dont follow the steps correctly you can brick your device, do it at your own risk, AndroWide is not responsible for any issues caused to your phone after rooting or during the process.
Known Bugs :
After enabling Camera2API on Redmi 5A MIUI camera does't work (you can disable the Camera2API at any time to use stock camera),
Video Recording is not working on GCMode Camera as of now on Redmi 5A.
Now let me tell you that what you will have to do to achieve this camera port on you device.
Steps :
Unlock Your Bootloader
Download Magisk.zip file and LazyFlasher.zip files and put it on your Redmi 5A's Internal Storage and also download the GCMode camera apk and put put it on your device
Download and install ADB & Fastboot Drivers on Your Laptop/PC
Download latest adb folder (extract it to desktop)
Download the official TWRP for Redmi 5A and ( copy twrp-3.2.1-0-riva.img to the adb folder)
Now boot you device into fastboot mode (simply press and hold volume down + power key for upto 5 seconds)
now connect your device with the pc and open the adb folder,
now press & hold shift key and press right click on the screen to open command window AKA powershell window (just open the command window)
now type command:
fastboot devices
now it will show you some random string (that means you device has been detected)
now run the following command :
fastboot flash recovery twrp-3.2.1-0-riva.img
now type the following command :
fastboot boot twrp-3.2.1-0-riva.img
now your device will boot into recovery mode just swipe right,
now click on install and select the LazyFlasher.zip file, after flashing done, just reboot your device,
now again boot into twrp recovery by pressing and holding volume Up+power key at the same time for upto 6 seconds
now again click on install and this time select magisk.zip file and wait until it shows done, now just reboot your device
and download the magisk manager app and install it, now download build prop editor from play store and edit the build.prop file (make sure to make a backup of your stock build.prop file)
now add the following line in build.prop file
persist.camera.HAL3.enabled=1 save the file and reboot your device.
now install the GCMod Camera which you have downloaded in the step one and make the following settings.
go to GCMod Settings, Click on Config camera HDR+ and select Nexux 5X, and click on model and select Nexus 5X, now scroll down and go to advanced and Enable HDR+ Control,
Now Just force close the GCMod Camera and now you can capture great portrait images with the front cam as well as rear cam.
:good::good::good:
how it is working on Redmi A5
is there big difrence to stock camera ?
Amazing work bro.. works great.
Hi.please help
So I have the redmi note 5 pro rooted and running a custom rom on Android 8.1 Oreo. I have enabled the camera2api enabler module in magisk manager.but still the manual camera compatibility app shows everything red and the camera apk I installed keeps crashing.
Please reply asap
How to fix video record
thank you, but when i want to send the image to facebook messenger, line, facebook app, the image doesn't appear, but when i open galery the image is there
Hi sir great work , but after enabling CAMERA2API my stock camera of Redmi 5a not working ,
I have followed the procedure step by step.
Please help sir
---------- Post added at 07:45 AM ---------- Previous post was at 07:42 AM ----------
Great work sir , Sir But I'm facing a problem that After enabling CAMERA2API my stock camera of Redmi 5a not working.
I have followed the procedure step by step.
Please help
have gcam for samsung j8 SD 450 ???
tiestodemoni said:
have gcam for samsung j8 SD 450 ???
Click to expand...
Click to collapse
It doesn't have camera 2api enabled
You have to enable it
m.ayaz1148 said:
It doesn't have camera 2api enabled
You have to enable it
Click to expand...
Click to collapse
if i'm enable, i'm can use the apk?
tiestodemoni said:
if i'm enable, i'm can use the apk?
Click to expand...
Click to collapse
Yes i m using gcam with night sight mode
faizalpathan said:
Yes i m using gcam with night sight mode
Click to expand...
Click to collapse
What Gcam are you using with nightsight mode ?
PHH aosp gsi confirmed to boot on BOLD-N1.
Need to be fully stock
--boot
--vendor
--recovery
Restoring device to factory condition , see this thread
Download PHH-AOSP 10
Download will be a compressed file *.gz , ectract the *.img file from inside
.
Code:
fastboot flash system **extracted-GSI.IMG**
fastboot oem reboot recovery
Perform factory reset inside stock recovery.
my tests trying to complete these steps with twrp all end with unknown imei.
V203 boots with only found issue is the fingerprint sensor Not working. For me i feel mtk devices are not secure anyway, the fingerprint sensor is more of a gimmick, so if it is not working, i do not care.
Current version v215 tested by and boots fine.
https://github.com/phhusson/treble_experimentations/releases
Things to consider
WHAT WORKS:
audio -music and speaker phone
camera-front and back (yes pop-up camera works)
video-camera front and back
video playback --(tested youtube in browser) - recorded video playback
Phone calls
messages
auto rotate
brightness
wifi tethering
mtp
flashlight
lift to wake (needed to turn off then on to activate it)
adaptive brightness
dark theme
gps
WHAT DOESN'T:
--Fingerprint
--phone works/ but dialer app has message that device is unsupported
--off-mode charging -- when charging with phone off, bootloader logo screen stays on, instead of battery icon
--screen recording-- after enable dev option // feature flag // settings_screenrecord_long_press .. you can access
screen record from long press power menu, long press screenshot menu, but recording will not save or stop
recording.-- setting option to on does not survive reboot
-- screen shot -- taking screen shot forces a bug report creation. (maybe this is not an issue, only a setting)
.
So I actually have to go back to stock since I'm running magisk? Is that why when I try flashboot flash vbmeta vbmeta.img it comes back as unknown file/directory?
Sergeantslaughter said:
So I actually have to go back to stock since I'm running magisk? Is that why when I try flashboot flash vbmeta vbmeta.img it comes back as unknown file/directory?
Click to expand...
Click to collapse
our device does not have VBmeta
the directions that say flash VBMETA, say use the stock meta file from stock firmware. so because that file is not used here, this is why you get the error message, ......
actually from your command you did not tell fastboot the location of the file you are trying to flash Unless you have a file called "vbmeta.img" in the current command terminal location. But again back to my original statement, our device does not have this file, so IF you do have the file, it is from other device anyway.
I guess I see how to flash the gsi but how do I get twrp installed?
mrmazak said:
PHH aosp gsi confirmed to boot on BOLD-N1.
only one permission file needed to be added. This is also expected to be included in the next release anyway.
Need to be fully stock
--boot
--vendor
--recovery
fastboot flash system **GSI.IMG**
fastboot oem reboot recovery
perform factory reset inside stock recovery.
my tests trying to complete these steps with twrp all end with unknown imei.
tested version was AOSP 10.0 v201
V203 boots without having to add the extra permission XML file.
Current version v204 not tested yet.
https://github.com/phhusson/treble_experimentations/releases
additional step to get version lower than v203 to boot
Download the additional permission file from
https://github.com/phhusson/device_...0.0/privapp-permissions-me.phh.treble.app.xml
While system is on boot animation screen. (this is as far as it will go on its own)
After the adb push, for me at least, the phone starts to continue its boot operation. Still do the reboot anyway.
Click to expand...
Click to collapse
So I haven't been able to find a twrp.img file for bold n1. Sorry if I sound stupid but this is my first time doing this. I had root with magisk and something screwed it up, and my phone was reading SIM cards. I uninstalled magisk and am back stock with an unlocked bootloader ...can you possibly walk me through installing twrp and flashing the Android 10 files? I would be so appreciative!
Sergeantslaughter said:
I guess I see how to flash the gsi but how do I get twrp installed?
So I haven't been able to find a twrp.img file for bold n1. Sorry if I sound stupid but this is my first time doing this. I had root with magisk and something screwed it up, and my phone was reading SIM cards. I uninstalled magisk and am back stock with an unlocked bootloader ...can you possibly walk me through installing twrp and flashing the Android 10 files? I would be so appreciative!
Click to expand...
Click to collapse
I have not been using twrp with GSI, but if you want to try goto twrp thread. Note that the twrp is currently only working with adb command line interface. No touch screen activity.
start by looking at the threads here. You will find twrp thread there.
So I've got Android 10 up and running...so can I just go ahead and root with magisk? Or will that mess up what I just did?
Sergeantslaughter said:
So I've got Android 10 up and running...so can I just go ahead and root with magisk? Or will that mess up what I just did?
Click to expand...
Click to collapse
aosp has root built in. If you prefer majisk, you need to first remove the included -su, and then need to use PHH-Majisk, not standard version.
Information on that should be found in gsi thread. It is not device specific.
ok so i had 10 working without twrp.....went to flash twrp...flash success....reboot to recovery...screen went black and CAN NOT get the device to power back on.....no vibrate no power no nada......wtf do i do?!?!?!
Sergeantslaughter said:
ok so i had 10 working without twrp.....went to flash twrp...flash success....reboot to recovery...screen went black and CAN NOT get the device to power back on.....no vibrate no power no nada......wtf do i do?!?!?!
Click to expand...
Click to collapse
you do know the screen in twrp has long delay before turns on. Do you have adb access to device?
if twrp is dead to adb, then
not sure why it would do that. but , i would first flash stock recovery with spflash tool
mrmazak said:
not sure why it would do that. but , i would first flash stock recovery with spflash tool
Click to expand...
Click to collapse
will that work? i cant get my phone to power on at all and adb is not recognizing it...
mrmazak said:
you do know the screen in twrp has long delay before turns on. Do you have adb access to device?
if twrp is dead to adb, then
not sure why it would do that. but , i would first flash stock recovery with spflash tool
Click to expand...
Click to collapse
everything is dead....phone no power or vibration while pushing buttons...no reaction when charging....adb says no device....fastboot the same
ive tried spflash tool but since computer isnt even detecting device, no luck.......im so upset. i just bought this phone.....the only kind of life i get is when plugging into windows laptop the connected "doop" sound for connected and then about 5 seconds later the same sound for disconnect.....repetitively and its driving me crazy
when trying to install the vcon drivers for spflash as the log is running says finish because its not detecting, but then says detected and drivers are newer what is trying to be installed...then not detected again
any advice? any chance at saving my phone??
Sergeantslaughter said:
everything is dead....phone no power or vibration while pushing buttons...no reaction when charging....adb says no device....fastboot the same
ive tried spflash tool but since computer isnt even detecting device, no luck.......im so upset. i just bought this phone.....the only kind of life i get is when plugging into windows laptop the connected "doop" sound for connected and then about 5 seconds later the same sound for disconnect.....repetitively and its driving me crazy
when trying to install the vcon drivers for spflash as the log is running says finish because its not detecting, but then says detected and drivers are newer what is trying to be installed...then not detected again
any advice? any chance at saving my phone??
Click to expand...
Click to collapse
That repeating sound is sign of bootloop.
Spflash tool is the recommended repair tool.
Download the factory restore package,
Extract the downloaded file.
Open flashtool, select scatter file from the extracted download. Ensure tool is on "download only" mode
Clear all select boxes in the tool window. Put check only in the recovery line.
Press download button, plug USB into phone. The bootloop in the phone is enough to make connection start.
What twrp did you use, where did it come from. Did you verify md5 of the downloaded file.
The only twrp I found was the one I shared, and it did not cause that kind of issue for me. So maybe you did something that you didn't mention?
I think I found the culprit... I download a file called "twrp" that actually turned out to be orangefoxrecovery... So I'm pretty positive that that's what caused it... Also, I've got a green check mark that says download OK.... Yellow bar at bottom of screen says recovery download flash 100%... What is my next step sir...?
---------- Post added at 05:11 AM ---------- Previous post was at 05:06 AM ----------
By the way I just wanna say you're awesome and thank you so much for your help!, this is my first time trying to do all this and I'm grateful to have someone so knowledgeable to save my a$$! Thanks man!
Sergeantslaughter said:
I think I found the culprit... I download a file called "twrp" that actually turned out to be orangefoxrecovery... So I'm pretty positive that that's what caused it... Also, I've got a green check mark that says download OK.... Yellow bar at bottom of screen says recovery download flash 100%... What is my next step sir...?
---------- Post added at 05:11 AM ---------- Previous post was at 05:06 AM ----------
By the way I just wanna say you're awesome and thank you so much for your help!, this is my first time trying to do all this and I'm grateful to have someone so knowledgeable to save my a$$! Thanks man!
Click to expand...
Click to collapse
Oh, last step is unplug USB. Then long press power button.
10 second should do. But maybe 20
Sergeantslaughter said:
everything is dead....phone no power or vibration while pushing buttons...no reaction when charging....adb says no device....fastboot the same
ive tried spflash tool but since computer isnt even detecting device, no luck.......im so upset. i just bought this phone.....the only kind of life i get is when plugging into windows laptop the connected "doop" sound for connected and then about 5 seconds later the same sound for disconnect.....repetitively and its driving me crazy
when trying to install the vcon drivers for spflash as the log is running says finish because its not detecting, but then says detected and drivers are newer what is trying to be installed...then not detected again
any advice? any chance at saving my phone??
Click to expand...
Click to collapse
Same happened to me, ended up fixing issue by using spflah tool (latest) and updated stock rom (mrmazak posted it) ?
I haven't bought the N1 yet but just might thanks to @mrmazak testing! Anyone tried Q v204 yet? Also curious if PHH regular Pie is bug free.
mrmazak said:
PHH aosp gsi confirmed to boot on BOLD-N1.
Need to be fully stock
--boot
--vendor
--recovery
Restoring device to factory condition , see this thread
Download PHH-AOSP 10
Download will be a compressed file *.gz , ectract the *.img file from inside
.
Code:
fastboot flash system **extracted-GSI.IMG**
fastboot oem reboot recovery
Perform factory reset inside stock recovery.
my tests trying to complete these steps with twrp all end with unknown imei.
V203 boots with only found issue is the fingerprint sensor Not working. For me i feel mtk devices are not secure anyway, the fingerprint sensor is more of a gimmick, so if it is not working, i do not care.
Current version v204 not tested by me yet.
https://github.com/phhusson/treble_experimentations/releases
Click to expand...
Click to collapse
Do not tell me in v 203 which version to download? I tried several but all to no avail
elephone p8000
any insight as to why every computer i plug my bold n1 into it shows up as a elephone p8000?
and on that note, say i found a working twrp for the elephone p8000 would that be possible?
i lost my root and android 10 due to bootloop. i used spflash to restore stock pie firmware. but now no matter what method or gsi or rom i try to flash my phone just will not accept it. The flashing is always successful, but upon reboot, i get a yellow/green screen flash followed by boot anim boot loop? any idea what would be causing this? i cant for the life of me figure out why my phone wont accept any system imgs i try to flash..
Sergeantslaughter said:
any insight as to why every computer i plug my bold n1 into it shows up as a elephone p8000?
and on that note, say i found a working twrp for the elephone p8000 would that be possible?
i lost my root and android 10 due to bootloop. i used spflash to restore stock pie firmware. but now no matter what method or gsi or rom i try to flash my phone just will not accept it. The flashing is always successful, but upon reboot, i get a yellow/green screen flash followed by boot anim boot loop? any idea what would be causing this? i cant for the life of me figure out why my phone wont accept any system imgs i try to flash..
Click to expand...
Click to collapse
Elephone p8000 is at least 3 years old. And would not think twrp from it will work on your bold n1.
As for why your PC shows your bold n1 as different phone, I can only guess that your PC drivers are somehow modified.
Or your phone is maybe not stock?