Hello!
Have somebody TWRP backup with stock B340?
I'm looking for this. Becouse I can't back to my B340. Any other ROM bricks my phone ;/
Still in need of a backup ? I can provide one
Yea, sitll need.
Bayont said:
Yea, sitll need.
Click to expand...
Click to collapse
ok I am uploading. Give me time.
I do not have 10 points yet and so I am not able to reply with external hyperlinks. Remove the spaces and you have your backup - h t t p : / / d - h . s t / 4 j p j
coffee_addict01 said:
I do not have 10 points yet and so I am not able to reply with external hyperlinks. Remove the spaces and you have your backup - h t t p : / / d - h . s t / 4 j p j
Click to expand...
Click to collapse
thank you for sharing .. do you mind if I post this to the File Depot for others ?
Also this is KIW-L21 KIW-L21C432B340 correct ? Does it include stock recovery or no ?
Thank you very much. I will try to Restore this and give you info if it work
It's restore without problem. But it's the same issue: Boot loop.
PS. Why in boot logo, first letter changed to red. When i'm bricked my phone all of letters were white. Maybe I should install C185? I'm from center of Europe.
clsA said:
thank you for sharing .. do you mind if I post this to the File Depot for others ?
Also this is KIW-L21 KIW-L21C432B340 correct ? Does it include stock recovery or no ?
Click to expand...
Click to collapse
I'll tell you what I did and you can decide if this contains stock recovery. Me device came with C432B140. I downloaded C432B340 and used the dload folder to upgrade. I then flashed twrp onto the device and took a backup. So I am not sure if stock recovery still exists in the file. I am an amateur so I am not very sure. But if you think this will help others then yeah sure you can post it to the file depot. Glad to be of help.
---------- Post added at 02:00 AM ---------- Previous post was at 01:58 AM ----------
Bayont said:
It's restore without problem. But it's the same issue: Boot loop.
PS. Why in boot logo, first letter changed to red. When i'm bricked my phone all of letters were white. Maybe I should install C185? I'm from center of Europe.
Click to expand...
Click to collapse
If you bought the device in europe then why do you want C185 ? If I understand it right C185 are middle eastern models. I bought my device in Germany if that info is of any help to you. As far as the boot loop and the red letter goes, I am sorry . I didn't face any issues.
Bayont said:
It's restore without problem. But it's the same issue: Boot loop.
PS. Why in boot logo, first letter changed to red. When i'm bricked my phone all of letters were white. Maybe I should install C185? I'm from center of Europe.
Click to expand...
Click to collapse
Try clearing cache and dalvik cache.
coffee_addict01 said:
I do not have 10 points yet and so I am not able to reply with external hyperlinks. Remove the spaces and you have your backup - h t t p : / / d - h . s t / 4 j p j
Click to expand...
Click to collapse
I tested out of curiousity and restore works fine. One question though, it asks for unclock password after restart? have you set up one?
nrpetonr said:
I tested out of curiousity and restore works fine. One question though, it asks for unclock password after restart? have you set up one?
Click to expand...
Click to collapse
Just wipe data and you're good.
Sent from my honor 5X using XDA Labs
adriansticoid said:
Just wipe data and you're good.
Sent from my honor 5X using XDA Labs
Click to expand...
Click to collapse
well, thanks for the hint, it is clear for me. but I am kinda lazy to go over data restore again I believe provider of this backup knows the pin let's see
btw, someone was asking if it contains stock recovery, it does not.
nrpetonr said:
well, thanks for the hint, it is clear for me. but I am kinda lazy to go over data restore again I believe provider of this backup knows the pin let's see
btw, someone was asking if it contains stock recovery, it does not.
Click to expand...
Click to collapse
Yes of course stock recovery won't be included because TWRP was used in that.
Sent from my honor 5X using XDA Labs
I take advanced wipe and i checked: System, Data, Cust, Dalvik, Cache. And now i'm restored this backup: System, Data, Boot. Next I wiped dalvik/cache factory reset by TWRP. And reboot to system. And the same, I'm waiting and nothing. Can you do backup with cust, EFS and Recovery? Only with them.
Bayont said:
I take advanced wipe and i checked: System, Data, Cust, Dalvik, Cache. And now i'm restored this backup: System, Data, Boot. Next I wiped dalvik/cache factory reset by TWRP. And reboot to system. And the same, I'm waiting and nothing. Can you do backup with cust, EFS and Recovery? Only with them.
Click to expand...
Click to collapse
Stock recovery cannot be backed up with TWRP as it is replaced once you flash TWRP. You also cannot use EFS of other phones. It will destroy your IMEI.
Sent from my honor 5X using XDA Labs
OK, thank you. I'm just looking for backed up cust for B340
adriansticoid said:
Stock recovery cannot be backed up with TWRP as it is replaced once you flash TWRP. You also cannot use EFS of other phones. It will destroy your IMEI.
Sent from my honor 5X using XDA Labs
Click to expand...
Click to collapse
You can backup stock recovery by booting TWRP and not flashing it.
And you are correct DO NOT RESTORE EFS from another phone to yours.
/cust is ok just not oeminfo or efs1 or efs2
All this talk is mostly useless he is going to need a full update.app of B340 to get his working. I know it sucks waiting but he made many mistakes along the line before he came here for help.
His story started here -> http://forum.xda-developers.com/showthread.php?p=69147372
Sent from my SM-N920T using Tapatalk
clsA said:
You can backup stock recovery by booting TWRP and not flashing it.
And you are correct DO NOT RESTORE EFS from another phone to yours.
/cust is ok just not oeminfo or efs1 or efs2
All this talk is mostly useless he is going to need a full update.app of B340 to get his working. I know it sucks waiting but he made many mistakes along the line before he came here for help.
Click to expand...
Click to collapse
Oh man. I didn't know that. I should have backed up my stock recovery first for emergency purposes. Thanks again bro.
nrpetonr said:
I tested out of curiousity and restore works fine. One question though, it asks for unclock password after restart? have you set up one?
Click to expand...
Click to collapse
I might have setup a password . Sorry about it . Try 1989
---------- Post added at 01:14 PM ---------- Previous post was at 01:08 PM ----------
clsA said:
You can backup stock recovery by booting TWRP and not flashing it.
And you are correct DO NOT RESTORE EFS from another phone to yours.
/cust is ok just not oeminfo or efs1 or efs2
All this talk is mostly useless he is going to need a full update.app of B340 to get his working. I know it sucks waiting but he made many mistakes along the line before he came here for help.
His story started here -> http://forum.xda-developers.com/showthread.php?p=69147372
Click to expand...
Click to collapse
I tried booting twrp a few times during the process and could never get it working . Could you please provide more info on this ? What is the procedure and syntax ?
Related
Ok, i was trying to get back to stock again cuz i have my S8 now.
Thing is, i did a factory reset in the Phones settings and it got me to TWRP i forgot i had that, i tought i had stock recovery, so it removed the whole OS for me, so now im here with no OS.
What should i do?
I have no SD-Card so i cant put anything there, what should i do?
Rommco05 said:
U can enter to fastboot? DC Phoenix is good tool for repair phone but is payed.
Click to expand...
Click to collapse
Ye, the white thing where it says phone unlocked? Dont really wanna pay for something.
Rommco05 said:
Yes. Ok
Click to expand...
Click to collapse
Any other things to do?
How can i flash a stock rom or something via twrp? fastboot or somth.
Rommco05 said:
Try use rebrand method, is in guide section
Click to expand...
Click to collapse
Hmm, tried it out but i didnt managed to get it to work.
Can i use any rom to flash trough FASTBOOT?
or should i get an SDCard and put a rom on it ?
had the same.problem last week and it drove me.nuts. if you have stf l09c432 version there is a b130 service firmware. you can put it on micro sd, format it exfat which is important due to size and then press vol up, vol dn and power simultaneously. recovery will install and phone will boot for sure with stock recovery. the only way which worked for me. capacitive bhttons are dead which is the downside of this method.
Sent from my GT-I9300 using Tapatalk
More suggestions are welcome, i dont have an SDCard right now, and i want it to work so i can sell it.
for me this was the only firmware that worked after no os. i tried huawei multitool. this has an unbrick section, all it does is flashing cust, boot, data, recovery and userdata in the right order using fastboot flash cust cust.img for example. didnt work i tried flashing all parts with fastboot flash command on my own including vendor.img etc. still never worked.
Sent from my GT-I9300 using Tapatalk
---------- Post added at 09:11 PM ---------- Previous post was at 09:10 PM ----------
rommco05 has a backup madw with twrp i think of his c432 firmware maybe flash that back in via twrp works well
Sent from my GT-I9300 using Tapatalk
Rommco05 said:
You have still twrp?
Click to expand...
Click to collapse
Yes
Rommco05 said:
Have u unlock code for bootloader?
Click to expand...
Click to collapse
No. Was trying acessing the chinese website i got it from but site was down
Rommco05 said:
If cant boot to rom where u want find product ID from your phone?
Click to expand...
Click to collapse
Idk haha.
There must be a way to fix it.
Can i buy a sdcard and put a custom rom on it?
Rommco05 said:
Yes u can try but I don't know how restore stock rom when u don't have unlock code
Click to expand...
Click to collapse
Cant i see my Product id if i get it to boots?
What a **** phone why it wipes whole os just because i wanna reset it
Rommco05 said:
Can u use warranty? I know how lock bootloader without code
Click to expand...
Click to collapse
Ye i can use it.
But dont they notice anything then
Rommco05 said:
If u lock bootloader is high chance to no. You can tel him small story (u must little bit lie) about problem with OTA updating
Click to expand...
Click to collapse
Ok. There is no way to get Product id now?
How can i lock it?
Rommco05 said:
ou no, u need for this sdcard :/
edit: u see folders in internal memory in twrp?
Click to expand...
Click to collapse
No, i cant see any download folder or something in twrp, thats why im guessing i need a sdcard, im getting my code soon, i emailed huawei and they will send
Hi, I know there are some TWRP images shared in this subforum but we felt like releasing our own, so that it remains updated and we have control over the source.
This is TWRP 3.1.1-1, nothing you haven't heard about, regular TWRP. The special part of it is that it supports data decryption.
What do I have to do for data decryption to work?
Just remove the screen lock (pin, password, pattern...) and it should be decrypted automatically, don't forget about this!
Whenever you've finished, you can set your password again, but it should be removed every time you want to decrypt data in TWRP.
You can download it here (provisional, I'll find a better way)
Have fun!
Just awesome
So, Can we take full Nand backups from TWRP now?
Hi, I l already have a twrp installed but I couldn't take the full backup as I got some error as reported by a lot of other users. So, If I flash this recovery, will I be able to take full backups?? Can I flash this TWRP using my already installed TWRP or do you recommend command line? Appreciate your work and thanks in advance.
I guess you can flash it from anywhere you want, backups should also work fine.
Thetpcguy said:
Hi, I l already have a twrp installed but I couldn't take the full backup as I got some error as reported by a lot of other users. So, If I flash this recovery, will I be able to take full backups?? Can I flash this TWRP using my already installed TWRP or do you recommend command line? Appreciate your work and thanks in advance.
Click to expand...
Click to collapse
Anyone tried it?
Ak931560 said:
Anyone tried it?
Click to expand...
Click to collapse
I tried and it installed well and all but when I tried to take back up from this TWRP version, it comes up with some error and the backup is not successful. I disabled all the pin/passwords.
---------- Post added at 06:21 AM ---------- Previous post was at 06:19 AM ----------
XePeleato said:
I guess you can flash it from anywhere you want, backups should also work fine.
Click to expand...
Click to collapse
Dear Developer, I just wanted to let you know that I installed this TWRP version over my openkirin TWRP version. It installed well but the backup doesn't work and is not successful. I disabled the pin/passwords also. What am I doing wrong?
Not working
Thetpcguy said:
I tried and it installed well and all but when I tried to take back up from this TWRP version, it comes up with some error and the backup is not successful. I disabled all the pin/passwords.
---------- Post added at 06:21 AM ---------- Previous post was at 06:19 AM ----------
Dear Developer, I just wanted to let you know that I installed this TWRP version over my openkirin TWRP version. It installed well but the backup doesn't work and is not successful. I disabled the pin/passwords also. What am I doing wrong?
Click to expand...
Click to collapse
Not working data still encrypted cant flash anything system always remains busy
I tried to make a backup partition BOOT and DATE. Everything turned out well after I restored it perfectly, but I confirm there is an error "the system partition can not be unmounted" system busy
Dear Developer @XePeleato
Tried on BND-AL10 with following findings.
1. Several times Backup Error
2.Failed to Unmount system
3.Failed to write backup on Internal Memory (i think decrypt failed)
4.Does not memorise the setting eg. enable compression, skip md5, also everytime asks to modify or keep system read only prompt.
after getting error during backup 5-6 times, this twrp managed to create a full backup. however i did not try restoring backup because i dont know unbrick methods, also stock rom has not released yet.
Can anyone conferms if restore works perfectly or not?
---------- Post added at 07:36 PM ---------- Previous post was at 07:34 PM ----------
svatoslav_p said:
I tried to make a backup partition BOOT and DATE. Everything turned out well after I restored it perfectly, but I confirm there is an error "the system partition can not be unmounted" system busy
Click to expand...
Click to collapse
did u try full backup and restore?
does full backup and restore work properly?
Please let me know.
Dr.Anshuman said:
Dear Developer @XePeleato
did u try full backup and restore?
does full backup and restore work properly?
Please let me know.
Click to expand...
Click to collapse
Yes, but I did this only with the BOOT, DATA sections. After the restore, everything worked exactly the same, except that the authorization of Google was deleted. With the SYSTEM section it does not work as "SYSTEM BUSY". However, you can backup / restore the SYSTEM partition through another TWRP. Here is the confirmation (in Russian, but I think it's understandable) 4pda.ru/forum/index.php?act=findpost&pid=70660590&anchor=Spoil-70660590-1
XePeleato said:
...it supports data decryption
Click to expand...
Click to collapse
What are the chances this will get ported to the Huawei P10/P10 Plus (Nougat) ? I'd really like to backup my data before playing with an Oreo update
Dear Developer,My SDCard is Not Being Detected or Mounted the Backup is Working Fine But Sdcard is not Mounting
Recovery 3.1.11
I have honor 7x,this twrp work perfectly, i did nandroid backup finally, very thangs
XePeleato said:
You can download it here (provisional, I'll find a better way)
Click to expand...
Click to collapse
Do you have a new download location? The old link says, "Not Found." Thanks in advance.
iammudd said:
Do you have a new download location? The old link says, "Not Found." Thanks in advance.
Click to expand...
Click to collapse
Yep! Link is dead and I hope you can provide new one.
Vink67 said:
Yep! Link is dead and I hope you can provide new one.
Click to expand...
Click to collapse
Is too bad, this went offline. The oreo version has decryption though
XePeleato said:
Hi, I know there are some TWRP images shared in this subforum but we felt like releasing our own, so that it remains updated and we have control over the source.
This is TWRP 3.1.1-1, nothing you haven't heard about, regular TWRP. The special part of it is that it supports data decryption.
What do I have to do for data decryption to work?
Just remove the screen lock (pin, password, pattern...) and it should be decrypted automatically, don't forget about this!
Whenever you've finished, you can set your password again, but it should be removed every time you want to decrypt data in TWRP.
You can download it here (provisional, I'll find a better way)
Have fun!
Click to expand...
Click to collapse
If you can re-upload the files because the link is dead, I think I'm not the only one who need this.
THX
Vink67 said:
If you can re-upload the files because the link is dead, I think I'm not the only one who need this.
THX
Click to expand...
Click to collapse
This has been dead for long time. And it was recovery for nougat not Oreo.
request for 'data\hw_init' folder backup EMUI8
request for 'data\hw_init' folder backup EMUI8 as I can't apply any themes due to abscence of stock themes
surdu_petru said:
Just awesome
Click to expand...
Click to collapse
Can it comfortable with BND-AL10,with running official oreo
plz help me sir
Just whant to share dd backup I did who are test and working for at least BND-L21.
dd rip of official OTA 8.0.0.330.
If someone have need.
Cust.img : https://mega.nz/#!q9tn2C6T!JMMSDYN5qc4BQrmKwtjifGqg26Je8SjiToPBM7wktp4
Kernel.img : https://mega.nz/#!Kg8AADgJ!PmBFU4vM1nTvcJnT-AttXBvV7IIh93xdEPgSY9kE0BE
Product.img : https://mega.nz/#!zk8glLyJ!HIKFQoEMuShRYYvm3SWeIfmpLa3LrOI_ahpJ2PDFQXc
Ramdisk.img : https://mega.nz/#!WokUmYZJ!zusLmvamHNUfEVkzn-oEg3rescsnuPG29iRUlQM3E8M
Vendor.img : https://mega.nz/#!H5VnUJxZ!rSI4rg2Hy-cNn9-I1-dMt2y0MHq45ypu2MqL_OP7SZY
Version.img : https://mega.nz/#!q0d2ASiK!20PPaQcjevG_3Hzu1qeBS3ye6FnfG9pL6htA6vy5E8c
System.img : https://mega.nz/#!ShVTHRYJ!-Ha-K9UgKahc7KkRRSRHPkpuLSC4Yr0sZ_kCzEumRs0
If you don't use BND-L21 then use this files at your own risk.
it would have been nice
if files were on some other filehost.
plz share oeminfo too
kdark said:
plz share oeminfo too
Click to expand...
Click to collapse
Wiil try and do
U think it will work on L24?
A bit of context here - my device model is BND-L34 (Mate SE) and I had tried using a method that a user posted in a Mate SE specific thread that detailed how to manually update to Oreo.
Well, that failed miserably and I ended up with a bricked device. I had tried numerous different things to try and revive it (some that I had come up with on my own) and none of them worked. Then I thought to use Multi-Tool to unbrick it with a backup I had lying around but unfortunately it was a Nougat backup.
I had almost lost hope until stumbling upon this thread. I figured I had nothing else to lose so I decided to try to restore my phone with Multi-Tool and your backup files - all except for the system image because MEGA decided to **** block me due to it being a large file (you should definitely upload them elsewhere, by the way), so what I did was use a stock system image someone uploaded in the OpenKirin RROS thread along with the rest of your backup files.
I had also gotten a stock ramdisk_recovery.img file from somewhere else (forgot where but if anyone has trouble finding a stock recovery for Oreo I can upload mine). And VOILA (hope I spelled that right)! My device is back to life on Oreo and I couldn't be more happy.
SO all in all, even if you didn't intend for L34 users to use these files, I want to thank you!
System image I used (see post #2)
[url]https://forum.xda-developers.com/honor-7x/development/rom-t3765201[/URL]
(Screenshots below in a separate post)
Had to put them in a separate post if I didn't wanna go through the trouble of moving the screenshots to my PC and uploading them there
Thanks man, it's great..:good::good::good::good::good:
XandeR180 said:
A bit of context here - my device model is BND-L34 (Mate SE) and I had tried using a method that a user posted in a Mate SE specific thread that detailed how to manually update to Oreo.
Well, that failed miserably and I ended up with a bricked device. I had tried numerous different things to try and revive it (some that I had come up with on my own) and none of them worked. Then I thought to use Multi-Tool to unbrick it with a backup I had lying around but unfortunately it was a Nougat backup.
I had almost lost hope until stumbling upon this thread. I figured I had nothing else to lose so I decided to try to restore my phone with Multi-Tool and your backup files - all except for the system image because MEGA decided to **** block me due to it being a large file (you should definitely upload them elsewhere, by the way), so what I did was use a stock system image someone uploaded in the OpenKirin RROS thread along with the rest of your backup files.
I had also gotten a stock ramdisk_recovery.img file from somewhere else (forgot where but if anyone has trouble finding a stock recovery for Oreo I can upload mine). And VOILA (hope I spelled that right)! My device is back to life on Oreo and I couldn't be more happy.
SO all in all, even if you didn't intend for L34 users to use these files, I want to thank you!
System image I used (see post #2)
[url]https://forum.xda-developers.com/honor-7x/development/rom-t3765201[/URL]
(Screenshots below in a separate post)
Click to expand...
Click to collapse
plz share your ramdisk img file i tried to find it but didn't get it
XandeR180 said:
I had also gotten a stock ramdisk_recovery.img file from somewhere else (forgot where but if anyone has trouble finding a stock recovery for Oreo I can upload mine). And VOILA (hope I spelled that right)! My device is back to life on Oreo and I couldn't be more happy.
Click to expand...
Click to collapse
I would be very interested in the stock ramdisk_recovery, could you send me the link?
Is that L21 version Indian variant?
can i please get some help with unbricking my l24 variant. i have twrp installed but it says frp is locked. twrp says i have no os
Sonny1732 said:
can i please get some help with unbricking my l24 variant. i have twrp installed but it says frp is locked. twrp says i have no os
Click to expand...
Click to collapse
If twrp works, there is a patch file that you can use to unlock frp.
MOD EDIT: LINK REMOVED
Would be helpful to understand what caused this problem though.
mrmazak said:
If twrp works, there is a patch file that you can use to unlock frp.
MOD EDIT: LINK REMOVED
Would be helpful to understand what caused this problem though.
Click to expand...
Click to collapse
ive had installed twrp and magisk the night before and had the app call lspeed downloaded, the next morning i deleted the lspeed app and restarted the device and got stuck on a bootloop so i factory reseted and now i just get the first honor screen then it reboots to the hauwei erecovery
Sonny1732 said:
ive had installed twrp and magisk the night before and had the app call lspeed downloaded, the next morning i deleted the lspeed app and restarted the device and got stuck on a bootloop so i factory reseted and now i just get the first honor screen then it reboots to the hauwei erecovery
Click to expand...
Click to collapse
Ok. Some reason twrp does not good a good job with factory resets.
I suggest flash that frp unlock.zip
Then flash stock ramdisk.img and stock kernel.img.
That will remove magisk, for now anyway.
Then try to boot. If still not, then flash stock recovery and do factory reset. But if reset again locks frp. You will be stuck.
If you dont mind resetting from fresh system maybe just reflash with hurupdater or hwota, instead of flashing stock recovery.
mrmazak said:
Ok. Some reason twrp does not good a good job with factory resets.
I suggest flash that frp unlock.zip
Then flash stock ramdisk.img and stock kernel.img.
That will remove magisk, for now anyway.
Then try to boot. If still not, then flash stock recovery and do factory reset. But if reset again locks frp. You will be stuck.
If you dont mind resetting from fresh system maybe just reflash with hurupdater or hwota, instead of flashing stock recovery.
Click to expand...
Click to collapse
i dont mind at all resetting from fresh system how do i do that
Sonny1732 said:
i dont mind at all resetting from fresh system how do i do that
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
mrmazak said:
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
Click to expand...
Click to collapse
thank you, ill give it a try
---------- Post added at 09:03 AM ---------- Previous post was at 08:50 AM ----------
Sonny1732 said:
thank you, ill give it a try
Click to expand...
Click to collapse
i cant download the frp unlock.zip
Sonny1732 said:
thank you, ill give it a try
---------- Post added at 09:03 AM ---------- Previous post was at 08:50 AM ----------
i cant download the frp unlock.zip
Click to expand...
Click to collapse
Ok hold on
Should be this
https://mega.nz/#!nw0wAYoA!hYtf78s0AjwRCpPo_NQ2F4LYclngNBNurJNETypSNKQ
From @KingOfMezi
mrmazak said:
Ok hold on
Click to expand...
Click to collapse
i did the HuRUpdater_0.3.zip and now i can get to the just a sec screen after i select wifi during setup but now its stuck there
Here you go xiaomi.eu_multi_MI8_8.9.13_v10-9.zip
https://androidfilehost.com/?fid=1322778262904006631
Edit: The notch is a little bit weird. It's a little above the physical notch line.
fastboot getvar anti = 1
Thank you anything else you discovered, will install it later as well and give feedback
Better take this link, I get 12MB/s
Can we flash 8.9.13 for Mi8 with OTA? Or should we first wipe everything?
Is it based on Android Pie 9.0 or not yet?
Thanks but slow download
---------- Post added at 11:53 AM ---------- Previous post was at 11:51 AM ----------
derMerowinger said:
Thank you anything else you discovered, will install it later as well and give feedback
Better take this link, I get 12MB/s
Click to expand...
Click to collapse
Thanks
Code:
wget https://miui.g3d.codes/8.9.13/xiaomi.eu_multi_MI8_8.9.13_v10-9.zip
--2018-09-16 13:52:15-- https://miui.g3d.codes/8.9.13/xiaomi.eu_multi_MI8_8.9.13_v10-9.zip
Resolving miui.g3d.codes (miui.g3d.codes)... 138.201.63.201
Connecting to miui.g3d.codes (miui.g3d.codes)|138.201.63.201|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1539607516 (1.4G) [application/zip]
Saving to: ‘xiaomi.eu_multi_MI8_8.9.13_v10-9.zip.1’
100%[====================================>] 1,539,607,516 43.6MB/s in 33s
2018-09-16 13:52:53 (45.0 MB/s) - ‘xiaomi.eu_multi_MI8_8.9.13_v10-9.zip.1’ saved [1539607516/1539607516]
skanskan said:
Can we flash 8.9.13 for Mi8 with OTA? Or should we first wipe everything?
Is it based on Android Pie 9.0 or not yet?
Click to expand...
Click to collapse
Format data, after that upgrade to Android P
PolariSz said:
Format data, after that upgrade to Android P
Click to expand...
Click to collapse
Will I loose my personal data and apps?
PolariSz said:
Format data, after that upgrade to Android P
Click to expand...
Click to collapse
Now i try it without format data
powergo said:
Now i try it without format data
Click to expand...
Click to collapse
You will get bootloop
---------- Post added at 12:58 PM ---------- Previous post was at 12:57 PM ----------
skanskan said:
Will I loose my personal data and apps?
Click to expand...
Click to collapse
Yes, backup your important data first.
Should I format data before or after install? Do I need to factory reset if I format data?
For me no bootloop, just dirty flash and no problem, before i use xiaomi.eu_multi_MI8_8.8.30_v10-8.1
s7eVe90 said:
Should I format data before or after install? Do I need to factory reset if I format data?
Click to expand...
Click to collapse
1. Backup your important data.
2. Format data from TWRP.
3. reboot to TWRP again and put the rom on your phone, then install
For me, this is what works best when upgrading clean:
1. Do a local MIUI back up
2. Titanium backup of user apps only
3. Reboot to recovery and do a factory data reset
4. Flash ROM and boot
5. Restore local MIUI back up
6. Restore missing apps in Titanium back up
7. Restore DATA only for all apps.
derMerowinger said:
Thank you anything else you discovered, will install it later as well and give feedback
Better take this link, I get 12MB/s
Click to expand...
Click to collapse
That's all I found out for now. A bit busy ATM... Let me know what you will find out on your end.
I can't go to twrp. phone is stuck at TWRP logo.
Any ideas?
samwise110712 said:
For me, this is what works best when upgrading clean:
1. Do a local MIUI back up
2. Titanium backup of user apps only
3. Reboot to recovery and do a factory data reset
4. Flash ROM and boot
5. Restore local MIUI back up
6. Restore missing apps in Titanium back up
7. Restore DATA only for all apps.
Click to expand...
Click to collapse
Thanks for the tips buddy, it said the anti rollback is enabled on this version , so we can't go back to android Oreo after installing this rom...is that real?
You can all go back, all you cannot is LOCK the BOOTLOADER
derMerowinger said:
You can all go back, all you cannot is LOCK the BOOTLOADER
Click to expand...
Click to collapse
that means don't install if you like to go back to a lower version, right?
Gesendet von meinem MI 8 mit Tapatalk
darkwader18701 said:
that means don't install if you like to go back to a lower version, right?
Gesendet von meinem MI 8 mit Tapatalk
Click to expand...
Click to collapse
YES!!!
Hello
Can someone with run this fastboot getvar anti ??? and post a here the results ?
With this way we can see if the device has Antirollback
PhilipZhu said:
Thanks for the tips buddy, it said the anti rollback is enabled on this version , so we can't go back to android Oreo after installing this rom...is that real?
Click to expand...
Click to collapse
I dont think, i try it for fre hours and now i'm back to 8.8.30 without problem
I made a backup of my phone with LOS16 on twrp. I backed.up "boot, system and data", then when I go to restore I load it up and the phone restarts to the "pocophone" startup screen. After waiting the phone goes to fastboot mode.
How. Do I take a proper backup on POCO with twrp so I can switch rims easily?
Mooatreides said:
I made a backup of my phone with LOS16 on twrp. I backed.up "boot, system and data", then when I go to restore I load it up and the phone restarts to the "pocophone" startup screen. After waiting the phone goes to fastboot mode.
How. Do I take a proper backup on POCO with twrp so I can switch rims easily?
Click to expand...
Click to collapse
My solution: flash rom - Los16 (kernel,magisk if you used etc.) and restor only DATA
mikussj3 said:
My solution: flash rom - Los16 (kernel,magisk if you used etc.) and restor only DATA
Click to expand...
Click to collapse
I's there something I missed or it was just a fluke?
Mooatreides said:
I's there something I missed or it was just a fluke?
Click to expand...
Click to collapse
I had a problem with miui10 backup and this solution helped. someone on this forum advised me. works with you?
mikussj3 said:
I had a problem with miui10 backup and this solution helped. someone on this forum advised me. works with you?
Click to expand...
Click to collapse
It happened yesterday and I just reloaded the rom from scratch(all useful data is on SD anyway) , just wanted to know if I can avoid it in the future. Thanks man
Mooatreides said:
It happened yesterday and I just reloaded the rom from scratch(all useful data is on SD anyway) , just wanted to know if I can avoid it in the future. Thanks man
Click to expand...
Click to collapse
Go with the default settings for backup in TWRP. You will not have any issue. But one word of caution, use the same version of TWRP for backup and restore. Otherwise you MAY face issues.
tnsmani said:
Go with the default settings for backup in TWRP. You will not have any issue. But one word of caution, use the same version of TWRP for backup and restore. Otherwise you MAY face issues.
Click to expand...
Click to collapse
i did it was the three selected i mentioned but still it was wierd, my phone stayed on "pocophone" screen for a while then went to fastboot. I turned it off and relaunched into TWRP and reinstalled the rom.
Mooatreides said:
i did it was the three selecte
ed i mentioned but still it was wierd, my phone stayed on "pocophone" screen for a while then went to fastboot. I turned it off and relaunched into TWRP and reinstalled the rom.
Click to expand...
Click to collapse
When backing up, select system image Instead of system, and vendor image instead of vendor. It's the same, and no more problems when restoring.
hyborian said:
When backing up, select system image Instead of system, and vendor image instead of vendor. It's the same, and no more problems when restoring.
Click to expand...
Click to collapse
I'm using the official twrp. This has worked for you? On official
Yes, perfectly