Here you go xiaomi.eu_multi_MI8_8.9.13_v10-9.zip
https://androidfilehost.com/?fid=1322778262904006631
Edit: The notch is a little bit weird. It's a little above the physical notch line.
fastboot getvar anti = 1
Thank you anything else you discovered, will install it later as well and give feedback
Better take this link, I get 12MB/s
Can we flash 8.9.13 for Mi8 with OTA? Or should we first wipe everything?
Is it based on Android Pie 9.0 or not yet?
Thanks but slow download
---------- Post added at 11:53 AM ---------- Previous post was at 11:51 AM ----------
derMerowinger said:
Thank you anything else you discovered, will install it later as well and give feedback
Better take this link, I get 12MB/s
Click to expand...
Click to collapse
Thanks
Code:
wget https://miui.g3d.codes/8.9.13/xiaomi.eu_multi_MI8_8.9.13_v10-9.zip
--2018-09-16 13:52:15-- https://miui.g3d.codes/8.9.13/xiaomi.eu_multi_MI8_8.9.13_v10-9.zip
Resolving miui.g3d.codes (miui.g3d.codes)... 138.201.63.201
Connecting to miui.g3d.codes (miui.g3d.codes)|138.201.63.201|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1539607516 (1.4G) [application/zip]
Saving to: ‘xiaomi.eu_multi_MI8_8.9.13_v10-9.zip.1’
100%[====================================>] 1,539,607,516 43.6MB/s in 33s
2018-09-16 13:52:53 (45.0 MB/s) - ‘xiaomi.eu_multi_MI8_8.9.13_v10-9.zip.1’ saved [1539607516/1539607516]
skanskan said:
Can we flash 8.9.13 for Mi8 with OTA? Or should we first wipe everything?
Is it based on Android Pie 9.0 or not yet?
Click to expand...
Click to collapse
Format data, after that upgrade to Android P
PolariSz said:
Format data, after that upgrade to Android P
Click to expand...
Click to collapse
Will I loose my personal data and apps?
PolariSz said:
Format data, after that upgrade to Android P
Click to expand...
Click to collapse
Now i try it without format data
powergo said:
Now i try it without format data
Click to expand...
Click to collapse
You will get bootloop
---------- Post added at 12:58 PM ---------- Previous post was at 12:57 PM ----------
skanskan said:
Will I loose my personal data and apps?
Click to expand...
Click to collapse
Yes, backup your important data first.
Should I format data before or after install? Do I need to factory reset if I format data?
For me no bootloop, just dirty flash and no problem, before i use xiaomi.eu_multi_MI8_8.8.30_v10-8.1
s7eVe90 said:
Should I format data before or after install? Do I need to factory reset if I format data?
Click to expand...
Click to collapse
1. Backup your important data.
2. Format data from TWRP.
3. reboot to TWRP again and put the rom on your phone, then install
For me, this is what works best when upgrading clean:
1. Do a local MIUI back up
2. Titanium backup of user apps only
3. Reboot to recovery and do a factory data reset
4. Flash ROM and boot
5. Restore local MIUI back up
6. Restore missing apps in Titanium back up
7. Restore DATA only for all apps.
derMerowinger said:
Thank you anything else you discovered, will install it later as well and give feedback
Better take this link, I get 12MB/s
Click to expand...
Click to collapse
That's all I found out for now. A bit busy ATM... Let me know what you will find out on your end.
I can't go to twrp. phone is stuck at TWRP logo.
Any ideas?
samwise110712 said:
For me, this is what works best when upgrading clean:
1. Do a local MIUI back up
2. Titanium backup of user apps only
3. Reboot to recovery and do a factory data reset
4. Flash ROM and boot
5. Restore local MIUI back up
6. Restore missing apps in Titanium back up
7. Restore DATA only for all apps.
Click to expand...
Click to collapse
Thanks for the tips buddy, it said the anti rollback is enabled on this version , so we can't go back to android Oreo after installing this rom...is that real?
You can all go back, all you cannot is LOCK the BOOTLOADER
derMerowinger said:
You can all go back, all you cannot is LOCK the BOOTLOADER
Click to expand...
Click to collapse
that means don't install if you like to go back to a lower version, right?
Gesendet von meinem MI 8 mit Tapatalk
darkwader18701 said:
that means don't install if you like to go back to a lower version, right?
Gesendet von meinem MI 8 mit Tapatalk
Click to expand...
Click to collapse
YES!!!
Hello
Can someone with run this fastboot getvar anti ??? and post a here the results ?
With this way we can see if the device has Antirollback
PhilipZhu said:
Thanks for the tips buddy, it said the anti rollback is enabled on this version , so we can't go back to android Oreo after installing this rom...is that real?
Click to expand...
Click to collapse
I dont think, i try it for fre hours and now i'm back to 8.8.30 without problem
Related
i have a little problem:
i just installed cyanogen 10, and all went great, except it won't do anything
it's just the blue icon on the start, and it's like that for hours, until the battery over
is there something i can do, or is complety bricked?
Doesn't sound like everything went all that great then!
What recovery did you use to flash the ROM? Did you wipe the device as per instructions first? Can you reboot into recovery mode? What ROM were you on before?
Just as a tip, you'll have to provide more detail and show you are trying to resolve the problem or you will find yourself on your own more often than not...
djmatt604 said:
Doesn't sound like everything went all that great then!
What recovery did you use to flash the ROM? Did you wipe the device as per instructions first? Can you reboot into recovery mode? What ROM were you on before?
Just as a tip, you'll have to provide more detail and show you are trying to resolve the problem or you will find yourself on your own more often than not...
Click to expand...
Click to collapse
well, i'm kinda new to this, so i used this post on xda:
http://forum.xda-developers.com/showthread.php?t=1803593 (my samsung tablet is 10.1, not 10.1v, i don't know if it makes the diference)
there was step 7 that says:
7. Once in recovery: clean cache & clean dalvik cache. (I did a full wipe to be sure I don't report bugs to pershoot which are linked to data problems).
and i remember clean cache, but the dalvik cache i couldn't find it
the rom i had was the same from the store, androind 3.2 i guess
and yes, i can go to the recovery mode, what can i do?
The first thing you shouod always to before flashing roms is make a backup in CWM recovery. If you have a backup then go to restore in recovery and restore it ans start over. Dalvnik cache is in the advanced section of CWM recovery. So is format system if you need to that per the instruction provided by the rom's OP.
FillTheVoid said:
The first thing you shouod always to before flashing roms is make a backup in CWM recovery. If you have a backup then go to restore in recovery and restore it ans start over. Dalvnik cache is in the advanced section of CWM recovery. So is format system if you need to that per the instruction provided by the rom's OP.
Click to expand...
Click to collapse
i didn't made a backup, so there is any file that can bring the old system back (android 3.2) ?
or is it possible to do directly on the CWM menu? (if there is, how do i do it? )
and thanks in advance for your help
Your going to have to use ODIN to get back to stock 3.2. Use the Unrooting process outlined I this thread http://forum.xda-developers.com/showthread.php?t=1474971. THIS WILL WIPE YOUR SD CARD PARTITION. From there, reflash clockworkmod recovery with ODIN, but use the one provided by pershoot on his blog if you plan to flash one of his experimental CM builds. Goodluck! Follow all steps carefully, perform all necissary wipes. Oh and the first thing to do after you flash clockworkmod is perform a backup!
---------- Post added at 01:50 PM ---------- Previous post was at 01:38 PM ----------
I think the links in the thread I gave you might be dead. If so you need the US 3.2 tar file. You can get it at sammobile.com.
FillTheVoid said:
Your going to have to use ODIN to get back to stock 3.2. Use the Unrooting process outlined I this thread http://forum.xda-developers.com/showthread.php?t=1474971. THIS WILL WIPE YOUR SD CARD PARTITION. From there, reflash clockworkmod recovery with ODIN, but use the one provided by pershoot on his blog if you plan to flash one of his experimental CM builds. Goodluck! Follow all steps carefully, perform all necissary wipes. Oh and the first thing to do after you flash clockworkmod is perform a backup!
---------- Post added at 01:50 PM ---------- Previous post was at 01:38 PM ----------
I think the links in the thread I gave you might be dead. If so you need the US 3.2 tar file. You can get it at sammobile.com.
Click to expand...
Click to collapse
IT WORKED
it's back to normal, but there is only one problem now: playstore is not so playable now, it won't open :\
Settings>applications>play store>clear data then re sign in.
FillTheVoid said:
Settings>applications>play store>clear data then re sign in.
Click to expand...
Click to collapse
nop, i tried, and yes, it starts the google play store like it was the first time, but then it crasches :\
there is a way to install it like the other programs? ( something.apk)
Airoso92 said:
nop, i tried, and yes, it starts the google play store like it was the first time, but then it crasches :\
there is a way to install it like the other programs? ( something.apk)
Click to expand...
Click to collapse
Yes, but for that you will need root. Place the play store apk in system/app and give it permissions -r -r -w
That's all I can think of at the moment. Maybe some one else will have another suggestion :-/
FillTheVoid said:
Yes, but for that you will need root. Place the play store apk in system/app and give it permissions -r -r -w
That's all I can think of at the moment. Maybe some one else will have another suggestion :-/
Click to expand...
Click to collapse
i search on google and voila:
it worked
thank you very much, if you ever come to portugal, i owe you a gallons of beer or vokca, your choice:laugh:
Airoso92 said:
IT WORKED
it's back to normal, but there is only one problem now: playstore is not so playable now, it won't open :\
Click to expand...
Click to collapse
You could ve flashed the wrong firmware or the one for different country.
try checking the firmware version and country version.
Still not working ?
Get a working store apk from Google.
No?
Use some other market temporarily like appbrain.
Sent from my Galtab with jb
Hello!
Have somebody TWRP backup with stock B340?
I'm looking for this. Becouse I can't back to my B340. Any other ROM bricks my phone ;/
Still in need of a backup ? I can provide one
Yea, sitll need.
Bayont said:
Yea, sitll need.
Click to expand...
Click to collapse
ok I am uploading. Give me time.
I do not have 10 points yet and so I am not able to reply with external hyperlinks. Remove the spaces and you have your backup - h t t p : / / d - h . s t / 4 j p j
coffee_addict01 said:
I do not have 10 points yet and so I am not able to reply with external hyperlinks. Remove the spaces and you have your backup - h t t p : / / d - h . s t / 4 j p j
Click to expand...
Click to collapse
thank you for sharing .. do you mind if I post this to the File Depot for others ?
Also this is KIW-L21 KIW-L21C432B340 correct ? Does it include stock recovery or no ?
Thank you very much. I will try to Restore this and give you info if it work
It's restore without problem. But it's the same issue: Boot loop.
PS. Why in boot logo, first letter changed to red. When i'm bricked my phone all of letters were white. Maybe I should install C185? I'm from center of Europe.
clsA said:
thank you for sharing .. do you mind if I post this to the File Depot for others ?
Also this is KIW-L21 KIW-L21C432B340 correct ? Does it include stock recovery or no ?
Click to expand...
Click to collapse
I'll tell you what I did and you can decide if this contains stock recovery. Me device came with C432B140. I downloaded C432B340 and used the dload folder to upgrade. I then flashed twrp onto the device and took a backup. So I am not sure if stock recovery still exists in the file. I am an amateur so I am not very sure. But if you think this will help others then yeah sure you can post it to the file depot. Glad to be of help.
---------- Post added at 02:00 AM ---------- Previous post was at 01:58 AM ----------
Bayont said:
It's restore without problem. But it's the same issue: Boot loop.
PS. Why in boot logo, first letter changed to red. When i'm bricked my phone all of letters were white. Maybe I should install C185? I'm from center of Europe.
Click to expand...
Click to collapse
If you bought the device in europe then why do you want C185 ? If I understand it right C185 are middle eastern models. I bought my device in Germany if that info is of any help to you. As far as the boot loop and the red letter goes, I am sorry . I didn't face any issues.
Bayont said:
It's restore without problem. But it's the same issue: Boot loop.
PS. Why in boot logo, first letter changed to red. When i'm bricked my phone all of letters were white. Maybe I should install C185? I'm from center of Europe.
Click to expand...
Click to collapse
Try clearing cache and dalvik cache.
coffee_addict01 said:
I do not have 10 points yet and so I am not able to reply with external hyperlinks. Remove the spaces and you have your backup - h t t p : / / d - h . s t / 4 j p j
Click to expand...
Click to collapse
I tested out of curiousity and restore works fine. One question though, it asks for unclock password after restart? have you set up one?
nrpetonr said:
I tested out of curiousity and restore works fine. One question though, it asks for unclock password after restart? have you set up one?
Click to expand...
Click to collapse
Just wipe data and you're good.
Sent from my honor 5X using XDA Labs
adriansticoid said:
Just wipe data and you're good.
Sent from my honor 5X using XDA Labs
Click to expand...
Click to collapse
well, thanks for the hint, it is clear for me. but I am kinda lazy to go over data restore again I believe provider of this backup knows the pin let's see
btw, someone was asking if it contains stock recovery, it does not.
nrpetonr said:
well, thanks for the hint, it is clear for me. but I am kinda lazy to go over data restore again I believe provider of this backup knows the pin let's see
btw, someone was asking if it contains stock recovery, it does not.
Click to expand...
Click to collapse
Yes of course stock recovery won't be included because TWRP was used in that.
Sent from my honor 5X using XDA Labs
I take advanced wipe and i checked: System, Data, Cust, Dalvik, Cache. And now i'm restored this backup: System, Data, Boot. Next I wiped dalvik/cache factory reset by TWRP. And reboot to system. And the same, I'm waiting and nothing. Can you do backup with cust, EFS and Recovery? Only with them.
Bayont said:
I take advanced wipe and i checked: System, Data, Cust, Dalvik, Cache. And now i'm restored this backup: System, Data, Boot. Next I wiped dalvik/cache factory reset by TWRP. And reboot to system. And the same, I'm waiting and nothing. Can you do backup with cust, EFS and Recovery? Only with them.
Click to expand...
Click to collapse
Stock recovery cannot be backed up with TWRP as it is replaced once you flash TWRP. You also cannot use EFS of other phones. It will destroy your IMEI.
Sent from my honor 5X using XDA Labs
OK, thank you. I'm just looking for backed up cust for B340
adriansticoid said:
Stock recovery cannot be backed up with TWRP as it is replaced once you flash TWRP. You also cannot use EFS of other phones. It will destroy your IMEI.
Sent from my honor 5X using XDA Labs
Click to expand...
Click to collapse
You can backup stock recovery by booting TWRP and not flashing it.
And you are correct DO NOT RESTORE EFS from another phone to yours.
/cust is ok just not oeminfo or efs1 or efs2
All this talk is mostly useless he is going to need a full update.app of B340 to get his working. I know it sucks waiting but he made many mistakes along the line before he came here for help.
His story started here -> http://forum.xda-developers.com/showthread.php?p=69147372
Sent from my SM-N920T using Tapatalk
clsA said:
You can backup stock recovery by booting TWRP and not flashing it.
And you are correct DO NOT RESTORE EFS from another phone to yours.
/cust is ok just not oeminfo or efs1 or efs2
All this talk is mostly useless he is going to need a full update.app of B340 to get his working. I know it sucks waiting but he made many mistakes along the line before he came here for help.
Click to expand...
Click to collapse
Oh man. I didn't know that. I should have backed up my stock recovery first for emergency purposes. Thanks again bro.
nrpetonr said:
I tested out of curiousity and restore works fine. One question though, it asks for unclock password after restart? have you set up one?
Click to expand...
Click to collapse
I might have setup a password . Sorry about it . Try 1989
---------- Post added at 01:14 PM ---------- Previous post was at 01:08 PM ----------
clsA said:
You can backup stock recovery by booting TWRP and not flashing it.
And you are correct DO NOT RESTORE EFS from another phone to yours.
/cust is ok just not oeminfo or efs1 or efs2
All this talk is mostly useless he is going to need a full update.app of B340 to get his working. I know it sucks waiting but he made many mistakes along the line before he came here for help.
His story started here -> http://forum.xda-developers.com/showthread.php?p=69147372
Click to expand...
Click to collapse
I tried booting twrp a few times during the process and could never get it working . Could you please provide more info on this ? What is the procedure and syntax ?
Ok, i was trying to get back to stock again cuz i have my S8 now.
Thing is, i did a factory reset in the Phones settings and it got me to TWRP i forgot i had that, i tought i had stock recovery, so it removed the whole OS for me, so now im here with no OS.
What should i do?
I have no SD-Card so i cant put anything there, what should i do?
Rommco05 said:
U can enter to fastboot? DC Phoenix is good tool for repair phone but is payed.
Click to expand...
Click to collapse
Ye, the white thing where it says phone unlocked? Dont really wanna pay for something.
Rommco05 said:
Yes. Ok
Click to expand...
Click to collapse
Any other things to do?
How can i flash a stock rom or something via twrp? fastboot or somth.
Rommco05 said:
Try use rebrand method, is in guide section
Click to expand...
Click to collapse
Hmm, tried it out but i didnt managed to get it to work.
Can i use any rom to flash trough FASTBOOT?
or should i get an SDCard and put a rom on it ?
had the same.problem last week and it drove me.nuts. if you have stf l09c432 version there is a b130 service firmware. you can put it on micro sd, format it exfat which is important due to size and then press vol up, vol dn and power simultaneously. recovery will install and phone will boot for sure with stock recovery. the only way which worked for me. capacitive bhttons are dead which is the downside of this method.
Sent from my GT-I9300 using Tapatalk
More suggestions are welcome, i dont have an SDCard right now, and i want it to work so i can sell it.
for me this was the only firmware that worked after no os. i tried huawei multitool. this has an unbrick section, all it does is flashing cust, boot, data, recovery and userdata in the right order using fastboot flash cust cust.img for example. didnt work i tried flashing all parts with fastboot flash command on my own including vendor.img etc. still never worked.
Sent from my GT-I9300 using Tapatalk
---------- Post added at 09:11 PM ---------- Previous post was at 09:10 PM ----------
rommco05 has a backup madw with twrp i think of his c432 firmware maybe flash that back in via twrp works well
Sent from my GT-I9300 using Tapatalk
Rommco05 said:
You have still twrp?
Click to expand...
Click to collapse
Yes
Rommco05 said:
Have u unlock code for bootloader?
Click to expand...
Click to collapse
No. Was trying acessing the chinese website i got it from but site was down
Rommco05 said:
If cant boot to rom where u want find product ID from your phone?
Click to expand...
Click to collapse
Idk haha.
There must be a way to fix it.
Can i buy a sdcard and put a custom rom on it?
Rommco05 said:
Yes u can try but I don't know how restore stock rom when u don't have unlock code
Click to expand...
Click to collapse
Cant i see my Product id if i get it to boots?
What a **** phone why it wipes whole os just because i wanna reset it
Rommco05 said:
Can u use warranty? I know how lock bootloader without code
Click to expand...
Click to collapse
Ye i can use it.
But dont they notice anything then
Rommco05 said:
If u lock bootloader is high chance to no. You can tel him small story (u must little bit lie) about problem with OTA updating
Click to expand...
Click to collapse
Ok. There is no way to get Product id now?
How can i lock it?
Rommco05 said:
ou no, u need for this sdcard :/
edit: u see folders in internal memory in twrp?
Click to expand...
Click to collapse
No, i cant see any download folder or something in twrp, thats why im guessing i need a sdcard, im getting my code soon, i emailed huawei and they will send
Hi, I know there are some TWRP images shared in this subforum but we felt like releasing our own, so that it remains updated and we have control over the source.
This is TWRP 3.1.1-1, nothing you haven't heard about, regular TWRP. The special part of it is that it supports data decryption.
What do I have to do for data decryption to work?
Just remove the screen lock (pin, password, pattern...) and it should be decrypted automatically, don't forget about this!
Whenever you've finished, you can set your password again, but it should be removed every time you want to decrypt data in TWRP.
You can download it here (provisional, I'll find a better way)
Have fun!
Just awesome
So, Can we take full Nand backups from TWRP now?
Hi, I l already have a twrp installed but I couldn't take the full backup as I got some error as reported by a lot of other users. So, If I flash this recovery, will I be able to take full backups?? Can I flash this TWRP using my already installed TWRP or do you recommend command line? Appreciate your work and thanks in advance.
I guess you can flash it from anywhere you want, backups should also work fine.
Thetpcguy said:
Hi, I l already have a twrp installed but I couldn't take the full backup as I got some error as reported by a lot of other users. So, If I flash this recovery, will I be able to take full backups?? Can I flash this TWRP using my already installed TWRP or do you recommend command line? Appreciate your work and thanks in advance.
Click to expand...
Click to collapse
Anyone tried it?
Ak931560 said:
Anyone tried it?
Click to expand...
Click to collapse
I tried and it installed well and all but when I tried to take back up from this TWRP version, it comes up with some error and the backup is not successful. I disabled all the pin/passwords.
---------- Post added at 06:21 AM ---------- Previous post was at 06:19 AM ----------
XePeleato said:
I guess you can flash it from anywhere you want, backups should also work fine.
Click to expand...
Click to collapse
Dear Developer, I just wanted to let you know that I installed this TWRP version over my openkirin TWRP version. It installed well but the backup doesn't work and is not successful. I disabled the pin/passwords also. What am I doing wrong?
Not working
Thetpcguy said:
I tried and it installed well and all but when I tried to take back up from this TWRP version, it comes up with some error and the backup is not successful. I disabled all the pin/passwords.
---------- Post added at 06:21 AM ---------- Previous post was at 06:19 AM ----------
Dear Developer, I just wanted to let you know that I installed this TWRP version over my openkirin TWRP version. It installed well but the backup doesn't work and is not successful. I disabled the pin/passwords also. What am I doing wrong?
Click to expand...
Click to collapse
Not working data still encrypted cant flash anything system always remains busy
I tried to make a backup partition BOOT and DATE. Everything turned out well after I restored it perfectly, but I confirm there is an error "the system partition can not be unmounted" system busy
Dear Developer @XePeleato
Tried on BND-AL10 with following findings.
1. Several times Backup Error
2.Failed to Unmount system
3.Failed to write backup on Internal Memory (i think decrypt failed)
4.Does not memorise the setting eg. enable compression, skip md5, also everytime asks to modify or keep system read only prompt.
after getting error during backup 5-6 times, this twrp managed to create a full backup. however i did not try restoring backup because i dont know unbrick methods, also stock rom has not released yet.
Can anyone conferms if restore works perfectly or not?
---------- Post added at 07:36 PM ---------- Previous post was at 07:34 PM ----------
svatoslav_p said:
I tried to make a backup partition BOOT and DATE. Everything turned out well after I restored it perfectly, but I confirm there is an error "the system partition can not be unmounted" system busy
Click to expand...
Click to collapse
did u try full backup and restore?
does full backup and restore work properly?
Please let me know.
Dr.Anshuman said:
Dear Developer @XePeleato
did u try full backup and restore?
does full backup and restore work properly?
Please let me know.
Click to expand...
Click to collapse
Yes, but I did this only with the BOOT, DATA sections. After the restore, everything worked exactly the same, except that the authorization of Google was deleted. With the SYSTEM section it does not work as "SYSTEM BUSY". However, you can backup / restore the SYSTEM partition through another TWRP. Here is the confirmation (in Russian, but I think it's understandable) 4pda.ru/forum/index.php?act=findpost&pid=70660590&anchor=Spoil-70660590-1
XePeleato said:
...it supports data decryption
Click to expand...
Click to collapse
What are the chances this will get ported to the Huawei P10/P10 Plus (Nougat) ? I'd really like to backup my data before playing with an Oreo update
Dear Developer,My SDCard is Not Being Detected or Mounted the Backup is Working Fine But Sdcard is not Mounting
Recovery 3.1.11
I have honor 7x,this twrp work perfectly, i did nandroid backup finally, very thangs
XePeleato said:
You can download it here (provisional, I'll find a better way)
Click to expand...
Click to collapse
Do you have a new download location? The old link says, "Not Found." Thanks in advance.
iammudd said:
Do you have a new download location? The old link says, "Not Found." Thanks in advance.
Click to expand...
Click to collapse
Yep! Link is dead and I hope you can provide new one.
Vink67 said:
Yep! Link is dead and I hope you can provide new one.
Click to expand...
Click to collapse
Is too bad, this went offline. The oreo version has decryption though
XePeleato said:
Hi, I know there are some TWRP images shared in this subforum but we felt like releasing our own, so that it remains updated and we have control over the source.
This is TWRP 3.1.1-1, nothing you haven't heard about, regular TWRP. The special part of it is that it supports data decryption.
What do I have to do for data decryption to work?
Just remove the screen lock (pin, password, pattern...) and it should be decrypted automatically, don't forget about this!
Whenever you've finished, you can set your password again, but it should be removed every time you want to decrypt data in TWRP.
You can download it here (provisional, I'll find a better way)
Have fun!
Click to expand...
Click to collapse
If you can re-upload the files because the link is dead, I think I'm not the only one who need this.
THX
Vink67 said:
If you can re-upload the files because the link is dead, I think I'm not the only one who need this.
THX
Click to expand...
Click to collapse
This has been dead for long time. And it was recovery for nougat not Oreo.
request for 'data\hw_init' folder backup EMUI8
request for 'data\hw_init' folder backup EMUI8 as I can't apply any themes due to abscence of stock themes
surdu_petru said:
Just awesome
Click to expand...
Click to collapse
Can it comfortable with BND-AL10,with running official oreo
plz help me sir
My phone is an Honor View 10 model BKL-L04 (American model) build 8.1.0.133 (C567GT).
These are the steps that I used to remove the stock firmware and recovery and replace them with something more to my taste. I did < 1% of the actual work here, I'm just putting everything that I did in once place so that other people may not have to look so hard to find answers.
Requirements
View 10 - If you don't have one then you're in the wrong place. Do NOT follow these directions for any other phone as both the directions and the links are specific to the model mentioned above.
Cash/PayPal - Most of us don't have the skills to pry out the bootloader unlock code ourselves so we must pay someone who does. God knows the manufacturer isn't going to help us out here
SD Card - You can probably get this done purely on internal storage, but weren't you going to put in a nice, big SD card anyway?
SD Card Writer (optional) - You'll need a way to load files onto the card prior to flashing. IMHO getting an SD card writer is the simplest way, but to each their own.
Unlocking
This guy will get you an unlock code for your View 10 for $22 (USD). Order a Bootloader Unlock Code, select the Huawei option "with IMEI", put BOTH of your IMEI numbers in the comments field, submit it and pay via PayPal. I got a code in about an hour. Once you have the code you can follow these directions to perform the unlocking process. If you need a bit more help getting though it then try this guide.
Flash Recovery
Don't use the official TWRP images. As of Dec 8, 2018 neither 3.2.1-0 nor 3.2.1.-1 worked for me (-0 dropped to fastboot after a few seconds and -1 caused a bootloop when entering recovery). Use the latest unofficial image from this page. Directions included. More detailed directions can be found here but make sure to use the TWRP image from the first link.
Copy Zips
Now pick out a ROM (I went with LineageOS 15.1) and copy all the zips you need to your SD card. The list probably includes the ROM itself, gapps, and some type of su/root package. Put them all on your card.
Flash ROM
If you're going with LIneageOS 15.1 as I did then this guide should get you the rest of the way. It has the links for the ROM itself as well as gapps and the su package. Again, be very careful to match exactly your phone model and architecture (arm64 for the View 10) when grabbing these packages.
Extras
You can find the latest stock firmware image for the BKL-L04 here. Be damn sure your phone matches mine before you use it! If you need to pull out the stock recovery for any reason, you can use the update extractor to do this (grab recovery_ramdisk), then flash it the same way you flash TWRP.
Good luck and have fun! I'll try to help if you get stuck but the real knowledgeable people are those that wrote the articles I've linked to.
Cheers!
- E
Is "twrp_bkl_0.7.img" the latest one?
As of Dec 9 I believe it is, yes.
Eimafn said:
As of Dec 9 I believe it is, yes.
Click to expand...
Click to collapse
It installed but it keeps saying unable to unmount system so I can't backup or flash a new rom.
MikeyJay530 said:
It installed but it keeps saying unable to unmount system so I can't backup or flash a new rom.
Click to expand...
Click to collapse
I didn't have that issue when I was first flashing the ROM, but I do now. If you're having it prior to flashing your ROM would it be because you didn't wipe & format beforehand? The guide I linked in step 5 leads you through this procedure if you need it.
As far as the unmounting error, I think that's something we'll have to live with until the issue is corrected in TWRP.
- E
Eimafn said:
I didn't have that issue when I was first flashing the ROM, but I do now. If you're having it prior to flashing your ROM would it be because you didn't wipe & format beforehand? The guide I linked in step 5 leads you through this procedure if you need it.
As far as the unmounting error, I think that's something we'll have to live with until the issue is corrected in TWRP.
- E
Click to expand...
Click to collapse
Then how can I flash a custom rom?
MikeyJay530 said:
Then how can I flash a custom rom?
Click to expand...
Click to collapse
I think it works if you wipe/format first. The guide I linked walks you through this.
Eimafn said:
I think it works if you wipe/format first. The guide I linked walks you through this.
Click to expand...
Click to collapse
I did wipe/format first lol still messed up
MikeyJay530 said:
I did wipe/format first lol still messed up
Click to expand...
Click to collapse
Hmm. Well, you can either try one of the official builds (here) or wait for the guy doing our customized build to fix this issue. You might even post a note on this thread describing your issue so that he can track how many people are having it.
Sorry I couldn't be more help. The View 10 is not the easiest phone to work with by a long shot.
- E
MikeyJay530 said:
I did wipe/format first lol still messed up
Click to expand...
Click to collapse
You should do it from emui settings not from twrp .
miststudent2011 said:
You should do it from emui settings not from twrp .
Click to expand...
Click to collapse
What do you mean?
MikeyJay530 said:
What do you mean?
Click to expand...
Click to collapse
You have told that you have formatted your device, if you have formatted it from twrp it will cause issues, you should format it from emui system settings.
miststudent2011 said:
You have told that you have formatted your device, if you have formatted it from twrp it will cause issues, you should format it from emui system settings.
Click to expand...
Click to collapse
No I need to do it in TWRP if I want to install a custom rom...lol
MikeyJay530 said:
No I need to do it in TWRP if I want to install a custom rom...lol
Click to expand...
Click to collapse
Seriously you are laughing at me for trying to help you ?
I need to do it in TWRP if I want to install a custom rom --> Where did you get it ?
Currently available TWRP are buggy and are causing issues.
miststudent2011 said:
Seriously you are laughing at me for trying to help you ?
I need to do it in TWRP if I want to install a custom rom --> Where did you get it ?
Currently available TWRP are buggy and are causing issues.
Click to expand...
Click to collapse
Noooo I'm laughing because I'm confused lol I got the twrp from the link on this thread.
MikeyJay530 said:
Noooo I'm laughing because I'm confused lol I got the twrp from the link on this thread.
Click to expand...
Click to collapse
TWRP is not needed if you try to flash openkirin roms they are among the best roms available right now for this device. go to openkirin.net for more details.
miststudent2011 said:
TWRP is not needed if you try to flash openkirin roms they are among the best roms available right now for this device. go to openkirin.net for more details.
Click to expand...
Click to collapse
I'm wanting to flash Pixel Experience though.
---------- Post added at 08:21 AM ---------- Previous post was at 08:06 AM ----------
miststudent2011 said:
TWRP is not needed if you try to flash openkirin roms they are among the best roms available right now for this device. go to openkirin.net for more details.
Click to expand...
Click to collapse
Also, how do I get TWRP off my phone so I have EMUI recovery back?
MikeyJay530 said:
I'm wanting to flash Pixel Experience though.
---------- Post added at 08:21 AM ---------- Previous post was at 08:06 AM ----------
Also, how do I get TWRP off my phone so I have EMUI recovery back?
Click to expand...
Click to collapse
Download full firmware package from firmware finder and extract recovery from update.app and flash it ,
BTW what is your current phone state ?
miststudent2011 said:
Download full firmware package from firmware finder and extract recovery from update.app and flash it ,
BTW what is your current phone state ?
Click to expand...
Click to collapse
Is there a guide for that? Sorry I'm new with this phone. My phone is unlocked.
MikeyJay530 said:
Is there a guide for that? Sorry I'm new with this phone. My phone is unlocked.
Click to expand...
Click to collapse
What is your phone current state, you have just flashed only twrp or any other changes ?
did you format your phone through emui settings before flashing twrp ?
what build are you on currently ?