I bought a used Samsung tab a 9.7 and I can't use it, goes on and off in loop when I power on. I tried an hard reset and message is dm-verity verification failed. I don't know what to do with it, so I think that reinstalling the original firmware would be the solution. The no. of the model that appears on the screen is SM-T550nzaaxar. I would appreciate very much if somebody has a link of the firmware as I can download it. I don't even have the driver when I connect on my PC a link of firmware would be appreciated too.
Thank you for any support that be done.
Related
Tried to flash the wrong rom. now tablet wont turn on. when plugged into pc it comes up as m6 chip and i have no drivers. can anyone point me in the right direction.
Hello,
I suggest you to download AMLOGIC BURNING TOOL
this will also install the required drivers for M6 Chip .... but you have to find out correct files for using with it.
.........................................................................................
.........................................................................................
I am also facing same problem of Hard Brick ST10 tab, I found the software but not able to get correct zip file to flash.
akashdubey22 said:
Hello,
I suggest you to download AMLOGIC BURNING TOOL
this will also install the required drivers for M6 Chip .... but you have to find out correct files for using with it.
.........................................................................................
.........................................................................................
I am also facing same problem of Hard Brick ST10 tab, I found the software but not able to get correct zip file to flash.
Click to expand...
Click to collapse
found this site in my searches. still haven't found anything stock or modded for mine yet. maybe you will have better luck . freaktab.(12skip[/url] a few) com/forumdisplay.php?33-NextBook-Tablets[/url] . wont let me post full link yet
HArd Bricked Nextbook nx007hd
So my tablet crashed a while ago, so i tried to flash my nextbook hd7 and it seems I used the wrong firmware, right now it doesnt turn on at all, the only thing i get is, if i hold power button for about 5-10 secs, i hear the usb connect sound, but my pc is unable to see any drivers, and reads as unknown device......any help would be appreciated....at this moment.
Model Number Nx007hd
Also i ordered two of these and was able to do a rum dump on the working one, but i dont know how to flash it on the non-working one.
Any help Please
sorillo555 said:
So my tablet crashed a while ago, so i tried to flash my nextbook hd7 and it seems I used the wrong firmware, right now it doesnt turn on at all, the only thing i get is, if i hold power button for about 5-10 secs, i hear the usb connect sound, but my pc is unable to see any drivers, and reads as unknown device......any help would be appreciated....at this moment.
Model Number Nx007hd
Also i ordered two of these and was able to do a rum dump on the working one, but i dont know how to flash it on the non-working one.
Any help Please
Click to expand...
Click to collapse
I read on another webforum about how to write back a rom dump using uberizer, careful though, i remember some version being unable to restore a rom dump
sorillo555 said:
So my tablet crashed a while ago, so i tried to flash my nextbook hd7 and it seems I used the wrong firmware, right now it doesnt turn on at all, the only thing i get is, if i hold power button for about 5-10 secs, i hear the usb connect sound, but my pc is unable to see any drivers, and reads as unknown device......any help would be appreciated....at this moment.
Model Number Nx007hd
Also i ordered two of these and was able to do a rum dump on the working one, but i dont know how to flash it on the non-working one.
Any help Please
Click to expand...
Click to collapse
Revisiting this tab as my solution for having it work was to fling together parts of the nx008, not perfect, I still needed to get the original ROM.
Can you perhaps provide me with a dump of the original ROM?
Also if you need help loading the rom onto the bricked one, I believe I can be of some help.
Thanks
I recently bought a GS5 Att model SM-G900A and attempted (foolishly it would seem) to downgrade the OS version. Unfortunately this caused some sort of issue that has forced the phone to be unable to boot or enter recovery mode. It will go into download mode but neither Odin nor Kies can seem to flash. Kies gives a falure and prompts me to recover but it wont recognize the phone to recover it. Odin always falils after Nand writing and the phone gives SW rev check fail : aboot fused 4> binary 1. After some research I suspect it has something to do with the 5.0 OS making it impossible for the 4.4.2 to flash. But I cant seem to find G900AUCU2AND3 anywhere and even kies doesn't find it. Any advice would be greatly appreciated
I have a LG K7 MS330 whose software was not working properly. Looking for a solution, I found that there were several firmware updates of this terminal (I had the version 10e compilation), which basically consisted of more recent versions of compilation distributed in kdz files. I proposed to download the latest update available ensuring I download the file corresponding to the smartphone region (MTP in my case).
So, I downloaded the file MS33010k_00_0405.kdz, the tool LGUP 1.14.3 and the file LGUP_MS330.dll version 0.1.2.7. I connected the phone to the PC and started the process.
At 99% the installation failed. However, I could still enter in download mode. So, I download an older version, the MS33010h_00_1021.kdz and repeated the process. This time I got no error.
However, when I finished, my phone went into hardbrick mode. Check the battery and no problem, even charging perfect inside the phone. I do not think the device has any problem with hardware as it worked before. The only life signal I have now from the device is connecting it via USB to PC and press the VOL +, VOL- and POWER buttons simultaneously. In this way, Windows recognizes it as "unknown usb device".
I would be grateful to anyone who can help me with this problem. Regards
I have the same problem!! Please!!
WOoh, I can't believe it. I have the same HEAD-BRICK, because my head has really bricked with this. I came here looking for answers and I just found that someone have the same problem than me, and with no answer. I did similars procediments before I get the hardbrick mode. Please, someone help me, I will really apreciate your help!!!! I really need to fix this!!! Please Please Please :crying: :crying:
i have the same problem too can some one help... no download mode.. no
emergency mode...please
Same.. Did anyone find out how to fix it?
Same issue... stuck in Qualcomm mode.
Any fix yet?
Need an mbn file for this K7. Looks like the only
Hope is finding the qfil file and firehose? Firehouse?. I forget. Xml file. If anyone has leads to where to start or links. It
Would be appreciated. Thank.
I have the exact same problem
I have the exact same problem that you have. I flashed an older rom by accident and now the screen is black and it is detected as qdloader9008. If anyone has found the firehose and the rest of the QFIL files then please help us.
Hello, I need help, I own a Samsung galaxy s8 and I tried to root it, I failed and ****ed up hard :'(
I tried to flash it following multiple tuto and it failed, I had the issue :
sw rev check fail bootloader device 3 binary 2
but now, my phone has a blue screen with :
an error has occurred while updating the device software.
Use the emergency recovery function in the smart switch PC software
The smart switch pc software doesn't recognize my phone.
Please help me i'm out of option :'(
Hi , try to put your phone into Download mode , and use latest Odin version in order to re-flash the latest stock version of OS if you are note sure which one is , just send me 7 and 8 number from imei ...
Thank you for your answer, I managed to fix my phone by flashing the latest firmware. I was downloading it from a website and it turns out it wasn't the last one.
After I looked on different site, I went on sammobile and I downloaded the latest version, It took me one entire day, the download speed was slow AF and my internet connection crashed in the middle of it.
I had to ask a friend to download it at his place and then, bring it to me.
I'm really happy, I managed to fix it.
I attempted to flash my SM-T970 XAR with stock firmware using Odin. It failed, and now says "An error has occurred while updating the device software". Is there any way I can recover or have I just bricked my S7+? Any help would be greatly appreciated...
Try the Samsung smart switch(PC) to recovery if not you need fine the frp hijack by hagard do recovery(sofebrick)...reboot it will got you back to download mode.
Smart switch was unable to locate the device, but I tried flashing again using Odin and it worked this time! No idea why the first time failed - I did it exactly the same way.