Related
Hi this tutorial is for them who wants to upgrade to Android 6.0 on J5 and also for those who wants to downgrade back to 5.1 on their J5 (2015) manually using odin.
This tutorial will be divided into three section upgrade, downgrade and rooting.
Upgrade to Android 6.0
As Samsung has started rolling out android 6.0 for J5 (2015) model. It will be available to all the regions sooner or later on most of the models of J5. Incase if you are not getting OTA update of android 6.0 on your country and are curious to try Android Marshmallow, you can try to flash android 6.0 available for other country. For example: If you have J500H model and android 6.0 for J500H is available for some other countries but not in your country than you can download android 6.0 firmware of those countries and flash it through Odin.
Note: The model number of J5 should be same for example you cannot flash J500F firmware to J500H ,
you can only flash firmware of J500H to J500H, countries or area does not matter as long as the
device model is same.
Procedure:
1. Go to the link below and search for firmware for your device. (Eg: Galaxy J500H)
2. You will find firmware for various regions and android version. Download the android 6.0 firmware for your
region. If you don’t get android 6.0 for your region than download android 6.0 available for any region as you
prefer.
3. Download odin from the link below.
4. Backup any necessary things like apps, contacts or files as you may loose them.
5. Now follow the instruction given below and flash android 6.0 to your j5.
PRE-REQUIREMENTS:
Download & Install Galaxy USB Driver on your computer,
Enable USB debugging on your Galaxy J5 smartphone and OEM unlocking.
Your phone battery should be at 80% or above.
How to Install Stock Rom on Galaxy J5
1 . After downloading the Galaxy J5 Firmware and Odin software files from the download section.
2. Extract/unzip both files on your computer.
3. Now, boot your Samsung Galaxy J5 into download mode. To do that turn off the phone, after the phone is off,
press and hold the Volume Down + Home + Power buttons at the same time.
4. Connect your Galaxy J5 to your computer using USB Cable and wait till Odin software detects it. Once, Odin
software detects your phone, you will see the Added message on Odin.
5. Before installing the stock firmware on Galaxy J5 make sure that both Auto Reboot and F.Reset Time are selected.
Then, click on the AP button on Odin software and select the stock Rom where you have previously extracted it.
Now click start button. Odin will start flashing.
6. In the end, on the Odin software the pass message should be displayed and your Samsung Galaxy J5 will
reboot automatically.
7. Congratulation you have upgraded to android 6.0 Marshmallow.
Detailed tutorial for flashing via Odin:
https://androidmtk.com/flash-samsung-stock-rom-using-odin
Downloads:
1. Firmware
http://www.sammobile.com/firmwares/
http://updato.com/firmware-archive-select-model
2. USB driver
https://androidmtk.com/download-samsung-usb-drivers
3. Odin
https://androidmtk.com/download-odin-downloader-versions
Downgrade to Android 5.1.1
Incase if you don’t like android 6.0 and want to downgrade you can downgrade to android 5.1.1 by following these
steps.
1. Download 5.1.1 firmware for your region from the given link.
2. Follow the steps provided in above upgrade tutorial and flash the firmware using the Odin.
Rooting:
For rooting your J5 on Android 6.0 as well as Android 5.1.1 follow these steps.
1. Download the TWRP recovery from the link below.
Android 5.1.1 (Lollipop) ( Thanks @Nick Verse for TWRP recovery)
http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j5-t3338869
Android 6.0 (Marshmallow) (Thanks @ganesh varma for TWRP recovery)
http://forum.xda-developers.com/android/development/recovery-samsung-galaxy-j500f-t3416960
2. Download Supersu zip from the link below
https://download.chainfire.eu/696/supersu/
For Marshmallow Users if you are facing bootloop after flashing supersu.zip . Flash the supersu file given in the link below.
https://mega.nz/#!zNVBhKjb!FZFKq6vaIPudYMoIajb-3zwuLOC26OHtdYY_TKt-6Qs (Thanks @jka_dark28 for link)
3. Now flash downloaded TWRP via Odin. (Follow the same process to Flash)
4. Transfer supersu zip file to your sd card.
5. After flashing TWRP. Reboot to recovery by pressing and holding Volume Up + Home + Power Button.
6. Now in TWRP select install, locate your Supersu zip file and flash it.
7. Than reboot your device. Congratulation you have rooted your device.
Note: Flashing TWRP and Supersu will void your warranty. So think before you flash. After flashing
TWRP do a nandroid backup first before flashing anything (even supersu file) so that if anything
goes wrong you can restore back.
And most important do everything on your own risk. I will not be responsible to any damage made to your device. But if you follow the process carefully you will not face any problem.
Hope this tutorial will help you all who don't have idea about these things.
Do write your comments and Hit thanks if it helped you.:laugh::good:
thanks for the tutorial!
testing
FOR MM
Wipe data factory reset in LL
Flash done : J500MUBU1BPF3_J500MZTO1BPF2_J500MUBU1BPF2_HOME.tar
Device does not have drk please install drk first ( knox counter =01 ), reboot.
after 15 min device start.
- TWR Working
- Root not workin on MM J500MUBU1BPF3_J500MZTO1BPF2_J500MUBU1BPF2_HOME.tar (Brazil) use this:
https://mega.nz/#!zNVBhKjb!FZFKq6vaIPudYMoIajb-3zwuLOC26OHtdYY_TKt-6Qs
- For Xposed framework use xposed-v86.0-sdk23-arm-custom-build-by-wanam-20160709:
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
What did you tried to flash? Is it MM or LL Firmware? And thanx for xposed and root file link.
Does this work on SM-J500F/DS? Its basically a normal J5 but with dual sim but I wanna be sure.
ZemoDroid said:
Does this work on SM-J500F/DS? Its basically a normal J5 but with dual sim but I wanna be sure.
Click to expand...
Click to collapse
What are you trying to? Upgrade to MM or downgrade to LL. And yes you can flash the firmware of J500F.
rjrulz007 said:
What are you trying to? Upgrade to MM or downgrade to LL. And yes you can flash the firmware of J500F.
Click to expand...
Click to collapse
I'm trying to root it.
Just flash twrp via odin. And install supersu zip via twrp. And remember it will void your warranty. One more thing do a nandroid backup before flashing anything.
Do I need to unlock bootloader before flashing twrp.? If it is required how can I do it on Samsung galaxy J500H running marshmallow 6.0.1?
Thank you
Whatisausername said:
Do I need to unlock bootloader before flashing twrp.? If it is required how can I do it on Samsung galaxy J500H running marshmallow 6.0.1?
Thank you
Click to expand...
Click to collapse
You have to enable USB debugging on your Galaxy J5 and OEM unlocking by going into developer Options. To enable developer option go to system, About Phone, and tap Build number 5/6 times. Let me know if you need more help.
.yeah it helped but my phone is stuck at samsung.
Whatisausername said:
I did both however my phone simply does not boot into twrp.. Odin said passed and knox is tripped.
Click to expand...
Click to collapse
Untick the Auto Reboot from the options in Odin and flash the recovery. After flashing finishes,power off the device(by removing battery) and hold [ VOLUME UP+HOME+POWER] to enter into the recovery and swipe to 'allow modifications'. Hope This will help you.
Whatisausername said:
.yeah it helped but my phone is stuck at samsung.
Click to expand...
Click to collapse
Did you flashed anything after installing TWRP recovery, like any zip files?
rjrulz007 said:
Did you flashed anything after installing TWRP recovery, like any zip files?
Click to expand...
Click to collapse
Yeah update-superuser.zip
Edit: flashed stock rom ie 5.1.1 via odin and updating to 6.0.1 will try second file.
Whatisausername said:
Yeah update-superuser.zip
Edit: flashed stock rom ie 5.1.1 via odin and updating to 6.0.1 will try second file.
Click to expand...
Click to collapse
rjrulz007 said:
Did you flashed anything after installing TWRP recovery, like any zip files?
Click to expand...
Click to collapse
OK well which partitions should i backup?
Works great, Thanks
Downgrade
Hi All!
If I want to downgrade from 6.0.1 to 5.1.1 via Odin, is it sure, that I need only one AP/PDA file from firmware sites?
Because I remember with an older phone, that if I need to downgrade, it need the other files too - Bootloader, Phone, CSC.
Is it sure that there is no need for them? If it, where can I download them?
Thanks!
Hello mate, I have gone back and forward from LP - MM a number of times.
I have had no problem with it as all.
I just flashed the firmware from from Sam mobile ( there are lots us links through out the ROMs thread)
I have only had to put the file into the AP and flashed no problem.
Just mage sure that the firmware is the correct one for your model
Sent from my Galaxy J5 using XDA Labs
Hey, I have a SM J500F 6.0.1, can I root it the same way as an 6.0 or do I have tobdo anything diferent??
I Suggest that if your device won't pass Samsung logo, put it in recovery mode and Factory Reset.
I Had that issue and i solved it doing that.:fingers-crossed:
Do I need stock recovery to only root my J5?? And will I lose all my data if I root it??
For NewBie'sHii Today Iam Going To Help All New Users Of Grand 2 SM-G7102,SM-G7105.
BasicIf U Want To Install New Custom Roms Or Any Type Of Custom Rom Then Follow The Steps.
●First You Need A Custom Recovery To Install A Custom Rom Or Any Zip Files
●There Are Many Custom Recovery Available For Grand 2 Both Varients(But I Recommend TWRP).
How To Install Custom Recovery ?●First U Need To Download TWRP Recovery
●The Recovery Should Be In Tar Format(Odin Flashable)
●Then U Need To Download Odin Latest Version(I Added The Files Link Below)
●Then Extract Odin.zip In Desktop And Open Extracted Folder From There
●Now U Need To Access Your Phone Into Download Mode,To Access Download Mode U Need To Press(Volume Down+Home Button+Power Button Together)Then U Will See An Android Icon On Your Screen Press Volume Up Button To Continue,Now Connect Ur Device To Your PC Via An USB Cable.
●Ok Now Last Step Is Open Odin As Administrator By Right Click On Your Mouse.
●Now U Will See That Odin Is Opened And There Are Many Options Like AP,CP,Etc
●Now U Need To Select Ap Option And Find Ur Recovery.tar File Where U Placed It Then Click Start To Start The Installation.(Uncheck Auto Reboot Option If U Are On Stock Rom Means 4.4.2 Kitkat,This Will Bypass install-recovery.sh)
●It Will Take Some Seconds To Complete When U See Pass Message Then Look At Your Phone.
●Now Remove Battery And Reinsert The Battery And Press Volume Up+Home Button+Power Button) To Enter Into Recovery Mode.And U Will See That TWRP Is Written In Your Screen.
Congrats You're Successfully Installed Custom Recovery
How To Install Custom Rom Or Patches ?●First Download The Rom.zip File To Your Internel Storage Or Externel Storage Wherever U Want.
●Then In TWRP Recovery
●Select>Wipe Option Then Tick 4 Options
●Data,Cache,Dalvik-Cache,And System
●Now Install Ur Rom.zip File From Ur Specific Storage Where U Placed The Rom.zip File And Wait For Installation Complete(If There Is No Patch Required For The Rom,Then Follow This Instruction Only)
●And If There Is Any Patch Required To Fix Any Bug Of Any Rom That You're Installing Then All U Need To Do This Just Follow Above Step But Before Start U Select 1 Option Add Zip Files (Which Is Came After U Select Any Zip File),And Select Your Patch Zip For Your Rom,Then Start The Installation.
How To Fix BootLoop On Your Current Rom ?●Bootloop Is An Irritating Bug Of Any Device.
What Is Bootloop ?
●Look You're Using A Rom Such As Stock Or Custom Rom.And U've Powered Off Your Devicr Or U've Selected Restart,And Suddenly U're Saw That You're Phone Is Not Booting Or Stuck At Samsung Galaxy Grand 2 Logo Or In Boot Animation.And Not Booting Or Not Turning Up The Soft Key Lights.
How To Fix Bootloop ?
●If You've Did'nt Flashed Anything Then Select Wipe Dalvik Cache And Cache,After That Reboot Your Phone And Your Phone Will Start Within Some Minutes.
●If U Flashed Something That Is Not Supported By You're Device And U Dont Know What U've Done And U Saw Bootlooping Then Wipe All Partitions
System
Data
Dalvik-Cache
Cache
Then Reflash Your Rom With Patch(If U Remember How To Do This Then Ok Or Otherwise Follow My Step In This Thread Which I've Written Above.
How To Flash A Rom Without Loosing Any Of Your Personal Data Or Apps ?If U Want To Flash A Custom Rom With All Your Personal Data And Apps Then Stay Chilled You're In Right Place.
●First Of All Go To TWRP Recovery Go To Wipe And Select Only System,Cache,Dalvik-Cache Do Not Wipe Data
●Then Flash Your Favourite Custom Rom With Out Loosing Your Apps And Personal Data. :good:
Anirban Ganguly[email protected] Grand 2 duos,Lte(4G) Hit Thanks●If U Need Any Help Then Feel Free To PM Me At Xda.
●More Guides Are Coming Soon.
●Iam Bit Busy In Development,So When I've Free Time I Will Add More.
DownloadsDownloads Link In 3rd Post.
How To Install Boot.img Or Recovery.img Without A Pc ?●First You Will Need To Download Flashify From Play Store
●Open Flashify And Give It A Root Access
●Then Select Flash Img
●Then locate Your Img File Wherever You Placed It And Select Flash
●It Will Automatically Reboot
Thats It For Now More Guides Are Coming Soon
Reserved
DOWNLOADS
●TWRP[ms013g][Grand 2 Duos SM-G7102]
http://forum.xda-developers.com/galaxy-grand-2/orig-development/recovery-twrp-2-8-6-0-touch-recovery-t3107535
●Odin
https://drive.google.com/file/d/0BwyPHEL3RNOzRmtlZnA3UmwwZ1U/view?usp=drivesdk
Anirban Ganguly said:
DOWNLOADS
?TWRP[ms013g][Grand 2 Duos SM-G7102]
https://basketbuild.com/devs/aapav01/ms013g/TWRP/3.0.0
?TWRP[ms01lte][Grand 2 LTE SM-G7105]
https://www.dropbox.com/s/8lrh85ps62h2l8l/recovery.tar.md5?dl=0
?Odin
https://drive.google.com/file/d/0BwyPHEL3RNOzRmtlZnA3UmwwZ1U/view?usp=drivesdk
Click to expand...
Click to collapse
Bro Direct links of others work not allowed in xda... better give their thread link...so that no one will report to mod
....
Ok
Please, how do I flash recovery for Samsung Grand 2 without pc?
Billygent said:
Please, how do I flash recovery for Samsung Grand 2 without pc?
Click to expand...
Click to collapse
only possible only when a existing custom recovery installed on your device,if u want to flash zip but if u want to flash img file then follow my guide which is written above
This thread is really helpful for new users. Thx for this thread, really helpful.
Sincerely, NYT
I want to flash recovery.img for Samsung g7102 but I've got no pc. Is there a way to do that?
Flashing Recovery.IMG without PC
Billygent said:
I want to flash recovery.img for Samsung g7102 but I've got no pc. Is there a way to do that?
Click to expand...
Click to collapse
It is easy and convinient if you're gonna use this method somehow watch out for the bugs because it may cause u to get stuck on recovery booting or download mode (good news is it wont affect with ur memory).
Use flashify, select the downloaded recovery (Extract when needed) and wait for some few minutes to flash the file.
Billygent said:
I want to flash recovery.img for Samsung g7102 but I've got no pc. Is there a way to do that?
Click to expand...
Click to collapse
use flashify if you have root
To root without pc,you can use Kingroot
According to adilrenzu's guide here we are now able to root Lenovo K6 Note successflully. This guide is for users who want to change their phones to the factory original state, downgrade from 7.0 or unroot. I tested this with my lenovo k6 note. Bu as you know rooting and unrooting operations are dangerous and may brick your phone. Please do it with your own risk.
This downgrade process supports full OTA Upgrade.
Reguired Files
First Download all required files from here http://goo.gl/Gfs1zf
Install Drivers in 2_Driver.rar
Install softwares in 3_Microsoft C.rar (For 64bit Windows install Both)
Phone : In Developer Options >
>Turn on USB debugging
>Enable Oem Unlock
1. Uninstalling Root
We must uninstall root (supersu) on the device. Select supersu app and tap the settings.
Access > Default Access > Grant and Full Unroot > Continue > Yes > Yes
The phone is restarting now. Check the supersu app not in drawer.
Shutdown the phone.
2. Turn Phone To Download Mode.
Hold down together the Volume Up + Power button for a while. Release power key after lenovo logo shows up. On the menu select download. Download Mode dont have any screen. Screen is blank but working.)
Connect phone to PC
3. Flashing Rom
Unrar 5_K53_S123_170216_ROW_STOCK.rar (Latest) or 5_K53_S116_161115_ROW_STOCK.rar (Testing OTA)
Unrar 4_QcomDLoader.rar Open folder. Click and open QcomDloader.exe
On Downloder Window Click load button. (First on top left)
Select the directory of the rom files (The directory numbered 5 which contains many img files) Click OK.
Click settings button. (Second on top left)
Dont change anything. I was pre entered the options. Check the values. If wrong, correct.
Manifacture Order: EMPTY (Important)
Download Mode: UPGRADE
Chipset: 8937
Downloaded Rom: CHECKED
eMMC Programmer: prog_emmc_firehose_8937_ddr.mbn
Raw Program: rawprogram0.xml
patch0: patch0.xml
Click OK.
Click Start button. (Third on top left)
Status becomes Downloading. Wait for a while. Flashing finishes around 400-500 seconds.
Status becomes Finish. Progress Passed.
Disconnect the phone. Close the Downloader on PC.
Press Power button 10 seconds on phone. Device is restarting.
Wait a few minutes. Phone will be opened to first install mode . In language selection screen Shutdown the phone by pressing power button.
4. Installing ADB
Install 1_adb-setup-1.3.exe to the pc. (Select > Yes > Yes > Yes > Yes. In the opened window click Install)
5. Locking the Bootloader.
Restart phone in fastboot mode. (Hold down power + Volume DOWN keys. Fastboot Mode appairs left top of the screen.)
Connect phone to PC
Adb directory now located in C Drive. Open adb folder. Open a command window here. (CRTL+SHIFT right click on empty space. Select Open Command Prompt Here)
Type: fastboot devices then press enter. (Your device must be listing like: s356d3a9 fastboot)
Type: fastboot oem lock (OKAY [ 0.031s] finished. total time: 0.031s)
Type: fastboot oem device-info
Control all options are false.
Disconnect the phone. Restart phone by pressing power button 10 seconds.
Finished...
This rom contains no bloatware except Lenovo Help (a.k.a Lenovo Companion)
Changing The Phone Region (Optional)
Open Dialer > Type ####682# > Chose Your Region > Restart
Check Region > Type ####5993# > Last 2 chars are your region.
Changing the region gives you to access phone software's drive when connect it to PC
OFFICIAL ROM LINKS: (Lenovo Ota Server)
Update ROM S116-161115 to S123-170216
http://phonedl.ota.lenovomm.com/dls/v6/K53_S116_161115_ROW_TO_K53_S123_170216_ROW_WC2178D800.zip
Update ROM S123-170216 to S218-170605 (Official Android 7.0)
http://phonedl.ota.lenovomm.com/dls/v6/K53_S123_170216_ROW_TO_K53_S218_170605_ROW_WC48DE0BA5.zip
Changelog
Added Lenovo Vibe K6 Note Android 7.0 Nougat Official Rom Link: Download From Lenovo Server
Added Region Codes: S116-161115 Rom added to repository who wants to test OTA
....
Thanks for the thorough write-up!
Harder than unlocking bootloader
mehmet6ok said:
1. Uninstalling Root.
We must uninstall root (supersu) on the device. Select supersu app and tap the settings.
Access > Default Access > Grant and Full Unroot > Continue > Yes > Yes
The phone is restarting now. Check the supersu app not in drawer.
Shutdown the phone.
Click to expand...
Click to collapse
I've reached that stage, what should I answer to the questions about :
1. Restore original boot.img
2. Restore original recovery.img
I'm guessing a "NO" would be safer since they were modified and we're restoring anyway...ok did that.
ok, all good, although I did have to reboot my W7 computer to disable digital signing to install the Qualcomm drivers.
Thanks again, will be useful to upgrade to N on May 17th !
webvan said:
ok, all good, although I did have to reboot my W7 computer to disable digital signing to install the Qualcomm drivers.
Thanks again, will be useful to upgrade to N on May 17th !
Click to expand...
Click to collapse
Not may 17th. 2017 may:good:
Sorry what ? I'm pretty sure I got that date from Lenovo's site, let's see, yes : https://support.lenovo.com/fr/en/solutions/ht501098?cid=ww:display:1tf0ay#smartphone
"Lenovo VIBE K6 Note Android 6.0 Marshmallow Android 7.0 Nougat May-17 Pending"
Quick question, do you see any problem in flashing the recovery.img from your 5_K53_S123_170216_ROW_STOCK.rar ? I've just found out that you could easily remove the password locks by booting into TWRP and that's making me a bit nervous. Thanks !
Official OTA update rom added to first message.
webvan said:
Quick question, do you see any problem in flashing the recovery.img from your 5_K53_S123_170216_ROW_STOCK.rar ? I've just found out that you could easily remove the password locks by booting into TWRP and that's making me a bit nervous. Thanks !
Click to expand...
Click to collapse
No not tested. Not using phone locked. I tested the xposed and modules only.
mehmet6ok said:
According to adilrenzu's guide here we are now able to root Lenovo K6 Note successflully. This guide is for users who want to change their phones to the factory original state. I tested this with my lenovo k6 note. Bu as you know rooting and unrooting operations are dangerous and may brick your phone. Please do it with your own risk.
....
Click to expand...
Click to collapse
QUESTION
Is this rom can receive OTA Updates? /Excited about nougat update\
Can I flash the recovery.img and boot.img in 5 rom folder through adb/cmd command?
Do you have a flashable zip file?
Please reply to me I'm waiting
Here's the screenshot list of official update for k6 note
firemax13 said:
QUESTION
Is this rom can receive OTA Updates? /Excited about nougat update
Can I flash the recovery.img and boot.img in 5 rom folder through adb/cmd command?
Do you have a flashable zip file?
Please reply to me I'm waiting
Click to expand...
Click to collapse
Can receive Ota update: YES. select old firmware. After install you will receive the Ota update.
Tested with QComdownloader and Qfil. All OK. Not tested with command.
Flashable zip file: NO
mehmet6ok said:
Can receive Ota update: YES. select old firmware. After install you will receive the Ota update.
Tested with Qdownloader and Qfil. All OK. Not tested with command.
Flashable zip file: NO
Click to expand...
Click to collapse
Thanks!
mehmet6ok said:
According to adilrenzu's guide here we are now able to root Lenovo K6 Note successflully. This guide is for users who want to change their phones to the factory original state. I tested this with my lenovo k6 note. Bu as you know rooting and unrooting operations are dangerous and may brick your phone. Please do it with your own risk.
....
Click to expand...
Click to collapse
Question
It will wipe my all data and my important files?
firemax13 said:
Question
It will wipe my all data and my important files?
Click to expand...
Click to collapse
First time installation from root to unroot: YES
Do Backup
After installing the S116-161116, OTA UPDATE to S123-170216 Rom: NO
mehmet6ok said:
First time installation from root to unroot: YES
Do Backup
After installing the S116-161116, OTA UPDATE to S123-170216 Rom: NO
Click to expand...
Click to collapse
If I will flash the latest S123-170216 ROM still can receive the nougat update?
Or I need to flash the old S116-161116 ROM and update via OTA the latest S123-170216 ROM and receive the nougat update?
firemax13 said:
If I will flash the latest S123-170216 ROM still can receive the nougat update?
Or I need to flash the old S116-161116 ROM and update via OTA the latest S123-170216 ROM and receive the nougat update?
Click to expand...
Click to collapse
No difference and no matters. Old firmware was an ota working test for me.
According to net sniffing with latest rom, system updater apk can succesfully checks server and running.
There seems no problem.
Sent from my Lenovo Leovo VIBE K6 Note using XDA Labs
mehmet6ok said:
No difference and no matters. Old firmware was an ota working test for me.
According to net sniffing with latest rom, system updater apk can succesfully checks server and running.
There seems no problem.
Click to expand...
Click to collapse
SORRY FOR DISTURBANCE AND NOOB QUESTION
And also thank you so much for your cooperate
Sent from my Lenovo VIBE K6 Note using XDA Labs
---------- Post added at 03:03 PM ---------- Previous post was at 02:52 PM ----------
Reguired Files
First Download all required files from here http://goo.gl/Gfs1zf
Install Drivers in 2_Driver.rar
Install softwares in 3_Microsoft C.rar (For 64bit Windows install Both)
Can I upload your file to MediaFire and MEGA for faster download?
Because Google Drive is so slow downloading can't wait here in Philippines.....All we know here in Philippines the connection is to slow.....
I can provide you a link for both MediaFire and MEGA.
firemax13 said:
SORRY FOR DISTURBANCE AND NOOB QUESTION
And also thank you so much for your cooperate
Sent from my Lenovo VIBE K6 Note using XDA Labs
---------- Post added at 03:03 PM ---------- Previous post was at 02:52 PM ----------
Reguired Files
First Download all required files from here http://goo.gl/Gfs1zf
Install Drivers in 2_Driver.rar
Install softwares in 3_Microsoft C.rar (For 64bit Windows install Both)
Can I upload your file to MediaFire and MEGA for faster download?
Because Google Drive is so slow downloading can't wait here in Philippines.....All we know here in Philippines the connection is to slow.....
I can provide you a link for both MediaFire and MEGA.
Click to expand...
Click to collapse
No problem...And let me share the new links.
mehmet6ok said:
No problem...And let me share the new links.
Click to expand...
Click to collapse
I'm own my way tomorrow I will upload the link.
Please report to me if the link broke or down.
Thanks again!
mehmet6ok said:
According to adilrenzu's guide here we are now able to root Lenovo K6 Note successflully. This guide is for users who want to change their phones to the factory original state. I tested this with my lenovo k6 note. Bu as you know rooting and unrooting operations are dangerous and may brick your phone. Please do it with your own risk.
....
Click to expand...
Click to collapse
LINKSHere's the link I made.
I will upload the S116-161116 ROM and S123-170216 ROM later.
LINKS:
Adb_setup-1.3.zip
Link: http://www.mediafire.com/file/1s22pdptn8q8oox/1_adb-setup-1.3.exe
Driver.rar / Lenovo Usb Driver
Link: http://www.mediafire.com/file/rf4hfmm6nq8bw9s/2_Driver.rar
Microsoft C.rar
Link: http://www.mediafire.com/file/v6so59rww6o6b8f/3_Microsoft_C.rar
QcomDLoader.rar
Link: http://www.mediafire.com/file/i9pnl00kl2e22c2/4_QcomDLoader_(1).rar
Platform_Tools_Windows.zip with fastboot
Link: http://www.mediafire.com/file/1h71jaodrc2om06/platform-tools-latest-windows.zip
( PS. PLEASE REPORT IF THE LINK IS BROKEN OR CORRUPTED )
Please like button!!:good::good::good:
Wait for the ROM link I will upload it later
welcome ,
Moto One Power Stock Rom Twrp Flashable
with bootloop protection , Flashes are done inside fastboot environment
and you will experience a aroma based hyper shell user interface.
things You need
Full stock room zip download below
Twrp Installer zip v3.2.x : link Thanks to @lalitjoshi06
Motorola One Power , ofcourse
Steps to flash :
If you are in custom rom or stock rom steps are all same
boot to twrp
flash the zip
Do not wipe or erase anything all are automated , just reboot Twrp and flash the zip
PS: FULL STOCK ROM can take a little while to flash . have patience.
PSo not wipe or erase anything all are coded to be done automatically
just boot Twrp an flash the zip
Download Link : here
XDA:DevDB Information
Stock ROM and Firmware for TWRP, ROM for the Motorola One Power
Contributors
nageen9211, [email protected]
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Created 2019-03-29
Last Updated 2019-08-19
Reserved
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
nageen9211 said:
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
Click to expand...
Click to collapse
Do you have a guide on how to make a stock flash zip file. I want make one for my device as well. Or if I give you the files can you help me out?:fingers-crossed:
xperia_bird said:
Do you have a guide on how to make a stock flash zip file. I want make one for my device as well. Or if I give you the files can you help me out?:fingers-crossed:
Click to expand...
Click to collapse
#OT
it might vary from device to device.. in this what i did is:
* extracted partition dump from device using adb shell(need root)
Code:
dd if=/path/to/partition/ of=/sdcard/or/anything
* then made the zip (You can use mine just replace the files with your device correct files.. and you are good to go.
* othe guy did more amazing hacks.. like he made some fastboot envoronment in twrp and directly made zip from fastboot images.. although those images are pretty much same as extracted from sdb but sparsed you can have look on them too
hope it helped
nageen9211 said:
#OT
it might vary from device to device.. in this what i did is:
* extracted partition dump from device using adb shell(need root)
* then made the zip (You can use mine just replace the files with your device correct files.. and you are good to go.
* othe guy did more amazing hacks.. like he made some fastboot envoronment in twrp and directly made zip from fastboot images.. although those images are pretty much same as extracted from sdb but sparsed you can have look on them too
hope it helped
Click to expand...
Click to collapse
Thankyou for Reply and I want to try it. Because it might help me to get back to stock. But only problem is I have a stock rom on my computer. In my device is a custom rom installed. And cant go back to stock, because my device gets in bootloop after flashing stock rom.
Do you think when I make a flash zip, that I can bypass bootloop?
Bootlooping
xperia_bird said:
Thankyou for Reply and I want to try it. Because it might help me to get back to stock. But only problem is I have a stock rom on my computer. In my device is a custom rom installed. And cant go back to stock, because my device gets in bootloop after flashing stock rom.
Do you think when I make a flash zip, that I can bypass bootloop?
Click to expand...
Click to collapse
First you need to find the reason for bootlooping then only making the stock zip is possible
Actually installing stock ROM from pc should not give bootlooping if bootloop occcrs you messed up with files check whether the files belonging to your device model reply with device model and other stuffs
[email protected] said:
First you need to find the reason for bootlooping then only making the stock zip is possible
Actually installing stock ROM from pc should not give bootlooping if bootloop occcrs you messed up with files check whether the files belonging to your device model reply with device model and other stuffs
Click to expand...
Click to collapse
But how to take a log if i cant enter system or connect adb for trying find the reason of bootloop.
Do you maybe know a way?
xperia_bird said:
But how to take a log if i cant enter system or connect adb for trying find the reason of bootloop.
Do you maybe know a way?
Click to expand...
Click to collapse
Your device and model
[email protected] said:
Your device and model
Click to expand...
Click to collapse
Lenovo Z5, L78011.
nageen9211 said:
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
Click to expand...
Click to collapse
I tried an AOSP Rom and found out that VoLTE is not working. So I flashed to stock using this method.
All is now working, but I am repeatedly getting this error message regarding Motorola update being unsuccessful, which is burning down my battery faster.
What can I do about it?.
Please help.
Plz make multirom twrp for moto one
anurag_xpert said:
I tried an AOSP Rom and found out that VoLTE is not working. So I flashed to stock using this method.
All is now working, but I am repeatedly getting this error message regarding Motorola update being unsuccessful, which is burning down my battery faster.
What can I do about it?.
Please help.
Click to expand...
Click to collapse
is there any update available.. update that with fastboot firmware.. becuase for som ereason it cannot update for you..
nageen9211 said:
is there any update available.. update that with fastboot firmware.. becuase for som ereason it cannot update for you..
Click to expand...
Click to collapse
Thanks for the reply. I have downladed april fastboot flashable rom from Mororola updates (link shared at telegram channel) but when i unpacked it, there was no flash script inside, so I could not flash that stock rom and I am still getting this error.
If you or somebody can share that flashall.bat script, i will be thankful.
edit: managed to flash the latest official firmware using youtube tutorial by andro guruji.
All my data was also safe.
Thanks again.
Will I get official updates after flashing this stock rom??
flashall.bat error
nageen9211 said:
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
Click to expand...
Click to collapse
i got factory rom ie .tar file for moto one power
i try to flash from fastboot and using flashall.bat in the stock rom folwer it show error
the system cannot find the path specification
how to get ride from this
Directory error
lbcsc.clx said:
i got factory rom ie .tar file for moto one power
i try to flash from fastboot and using flashall.bat in the stock rom folwer it show error
the system cannot find the path specification
how to get ride from this
Click to expand...
Click to collapse
Do not open cmd directly go to the folder where your Moto system files present and press shift and write click then press open command window here then type fastboot commands
[email protected] said:
Do not open cmd directly go to the folder where your Moto system files present and press shift and write click then press open command window here then type fastboot commands
Click to expand...
Click to collapse
See the cmd in screenshot below
nageen9211 said:
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
Click to expand...
Click to collapse
Can you please post the link for the july patch or if possible please provide the link for july full stock rom. I am not able to update via OTP. Tried everything.
nageen9211 said:
welcome ,
Moto One Power Stock Rom Twrp Flashable
with bootloop protection , Flashes are done inside fastboot environment
and you will experience a aroma based hyper shell user interface.
things You need
Full stock room zip download below
Twrp Installer zip v3.2.x : link Thanks to @lalitjoshi06
Motorola One Power , ofcourse
Steps to flash :
If you are in custom rom or stock rom steps are all same
boot to twrp
flash the zip
Do not wipe or erase anything all are automated , just reboot Twrp and flash the zip
PS: FULL STOCK ROM can take a little while to flash . have patience.
PSo not wipe or erase anything all are coded to be done automatically
just boot Twrp an flash the zip
Download Link : here
XDA:DevDB Information
Stock ROM and Firmware for TWRP, ROM for the Motorola One Power
Contributors
nageen9211, [email protected]
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Created 2019-03-29
Last Updated 2019-08-19
Click to expand...
Click to collapse
hi i am bricked my moto
now i back to fast boot mod
how can i flash stock rom by twrp?
help me
i am horrified to brick my device again
I just share my experience. Do it at your own risk
I. Unlock bootloader
1. Enable developer options by tapping build number 7 times
2. Go to Developer options, turn on OEM unlocking
3. Turn off Tab A7 Lite, connect it to the computer while holding Volume Up and Volume Down keys until you see the bootloader screen
4. Long-press Volume Up key to enter Device unlock mode
5. Press Volume Up key to confirm and unlock the bootloader
Done
II. Root
1. Unlock bootloader (skip this if you have done it)
2. (On PC) Extract boot.img.lz4 from Stock AP...tar file, then copy it to Tab
3. (On Tab) Install ZArchiver to extract boot.img from boot.img.lz4
4. (On Tab) Install Magisk and patch the boot.img that you have just extracted from step 3
5. (On PC) Copy magisk_patched.img (in Tab\download) to pc, rename it to boot.img
6. (On PC) Use 7zip to pack boot.img from step 5 into boot.tar
7. (On PC) Use odin to flash boot.tar from step 6 (in AP slot)
8. After Tab reboot, open Magisk, update to newest version, open again and let it install something then reboot
Done
In case you don't want to do a full step by step as above, you can use my already patched boot.tar below, just download and flash it via odin. After flashing and reboot, open Magisk, update to newest version, open again and let it install something then reboot
For T225XXU1AUJ1:
boot
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
For T225XXU1AUL1:
boot
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
III. Debloat
1. Root
2. Open Magisk and install the following module:
https://www.mediafire.com/file/nlvw540lpgllygj/physwizz-debloater-module-v3.zip/file
3. Reboot
Sorry, I did put the tablet in download mode, but it says the boot image cannot be flashed with odin becaouse its custom binary even if developer mode is on and OEM unlock is on... Strange! Any Ideas?
Bercsenyilaszlo said:
Sorry, I did put the tablet in download mode, but it says the boot image cannot be flashed with odin becaouse its custom binary even if developer mode is on and OEM unlock is on... Strange! Any Ideas?
Click to expand...
Click to collapse
What binary is your Tab firmware ?
Sorry it was alright I just didnt press long enough the volume up button its different from a short press when unlocking the OEM.... Thats all a long press needed instead a short one.. Otherwise boot loader will stay locked.
Thanks for the thread GREAT WORK!
thatha said:
I just share my experience. Do it at your own risk
I. Unlock bootloader
1. Enable developer options by tapping build number 7 times
2. Go to Developer options, turn on OEM unlocking
3. Turn off Tab A7 Lite, connect it to the computer while holding Volume Up and Volume Down keys until you see the bootloader screen
4. Long-press Volume Up key to enter Device unlock mode
5. Press Volume Up key to confirm and unlock the bootloader
Done
II. Root
1. Unlock bootloader (skip this if you have done it)
2. (On PC) Extract boot.img.lz4 from Stock AP...tar file, then copy it to Tab
3. (On Tab) Install ZArchiver to extract boot.img from boot.img.lz4
4. (On Tab) Install Magisk and patch the boot.img that you have just extracted from step 3
5. (On PC) Copy magisk_patched.img (in Tab\download) to pc, rename it to boot.img
6. (On PC) Use 7zip to pack boot.img from step 5 into boot.tar
7. (On PC) Use odin to flash boot.tar from step 6 (in AP slot)
8. After Tab reboot, open Magisk, update to newest version, open again and let it install something then reboot
Done
In case you don't want to do a full step by step as above, you can use my already patched boot.tar below, just download and flash it via odin. After flashing and reboot, open Magisk, update to newest version, open again and let it install something then reboot
For T225XXU1AUJ1:
boot
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
For T225XXU1AUL1:
boot
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
III. Debloat
1. Root
2. Open Magisk and install the following module:
physwizz-debloater-module-v2
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
3. Reboot
Click to expand...
Click to collapse
Can you do files for a T220xxu1au13? Would love to debloat mine and start using it as a offline game tablet.
IronGearGaming said:
Can you do files for a T220xxu1au13? Would love to debloat mine and start using it as a offline game tablet.
Click to expand...
Click to collapse
Yes if I have some free time to download your firmware. If you can extract boot.img.lz4 from your firmware and send me, I can do it soon
I don't have boot . tar
master12311 said:
I don't have boot . tar
Click to expand...
Click to collapse
What country ?
england
Hello,
thank for your work I succeeded with root but I mistakenly installed a faulty twrp which bricked the tablet. I have access to download mode but I can't reinstall a functional version ("security fail tip) the only thing that odin accepts is your great work "patched boot.tar" but the boot still blocks. an idea to unlock it. thanks in advance
antineas said:
Hello,
thank for your work I succeeded with root but I mistakenly installed a faulty twrp which bricked the tablet. I have access to download mode but I can't reinstall a functional version ("security fail tip) the only thing that odin accepts is your great work "patched boot.tar" but the boot still blocks. an idea to unlock it. thanks in advance
Click to expand...
Click to collapse
I also bricked my tablet, and the only firmware ODIN accepted was downloaded by Frija. Got errors from Sam firm and Galaxyfirm.
antineas said:
Hello,
thank for your work I succeeded with root but I mistakenly installed a faulty twrp which bricked the tablet. I have access to download mode but I can't reinstall a functional version ("security fail tip) the only thing that odin accepts is your great work "patched boot.tar" but the boot still blocks. an idea to unlock it. thanks in advance
Click to expand...
Click to collapse
What is your firmware and country before ?
thatha said:
What is your firmware and country before ?
Click to expand...
Click to collapse
France and T225XXU1AUJ1
jorjee said:
I also bricked my tablet, and the only firmware ODIN accepted was downloaded by Frija. Got errors from Sam firm and Galaxyfirm.
Click to expand...
Click to collapse
thank I ve many error too whith Odin. I try to find it
antineas said:
thank I ve many error too whith Odin. I try to find it
Click to expand...
Click to collapse
What odin version are you using ?
antineas said:
Hello,
thank for your work I succeeded with root but I mistakenly installed a faulty twrp which bricked the tablet. I have access to download mode but I can't reinstall a functional version ("security fail tip) the only thing that odin accepts is your great work "patched boot.tar" but the boot still blocks. an idea to unlock it. thanks in advance
Click to expand...
Click to collapse
Flash stock recovery via odin in AP slot
recovery
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
thatha said:
Flash stock recovery via odin in AP slot
recovery
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Click to expand...
Click to collapse
Hello, thank you for taking the time to help me. the recovery is accepted and gave me back access to the recovery. A real progress but it still does not boot I did a factory reset without effect. I am not sure of the version I put image of the recovery in case .sorry I don't have much knowledge in these manipulations. I am only a copier...... But having access to recovery gives me hope. thank you very much
I use Odin 3_v3.14.
antineas said:
Hello, thank you for taking the time to help me. the recovery is accepted and gave me back access to the recovery. A real progress but it still does not boot I did a factory reset without effect. I am not sure of the version I put image of the recovery in case .sorry I don't have much knowledge in these manipulations. I am only a copier...... But having access to recovery gives me hope.
Click to expand...
Click to collapse
I think you should download and flash latest firmware. You can download from this site:
samfw.com
Hello,
thank you for your help i have repaired the boot. it was a question of firmware indeed but beware for tablets version T225 "N" the firmware is not the same and is more difficult to find. they are not offered on dedicated sites.