Hello guys,
I recently got an S6 Edge sprint.. G925P.
It went off few days ago and is now stuck in a bootloop.
I have wiped cache and data from recovery, still no joy.
It comes on.. says android is starting, optimizing app xx of 56.. It always reboots before it gets to 56.
I have downloaded a new rom from sammobile and flashed with odin, still wont work.
Here's the rom version i flashed.. G925PVPS4CPI3_G925PSPT4CPI3_G925PVPS4CPI3_HOME.tar
It;s been more than a week, still can't get it to work.. Any help is highly appreciated.
aniplus said:
Hello guys,
I recently got an S6 Edge sprint.. G925P.
It went off few days ago and is now stuck in a bootloop.
I have wiped cache and data from recovery, still no joy.
It comes on.. says android is starting, optimizing app xx of 56.. It always reboots before it gets to 56.
I have downloaded a new rom from sammobile and flashed with odin, still wont work.
Here's the rom version i flashed.. G925PVPS4CPI3_G925PSPT4CPI3_G925PVPS4CPI3_HOME.tar
It;s been more than a week, still can't get it to work.. Any help is highly appreciated.
Click to expand...
Click to collapse
What region are you in?
What android version?
It's a Sprint SM-G925P, and it's the 6.0.1 version, the latest on the sammobile site
aniplus said:
It's a Sprint SM-G925P, and it's the 6.0.1 version, the latest on the sammobile site
Click to expand...
Click to collapse
https://dl.twrp.me/zeroltespr/
Townload and flash twrp, from there wipe dalvik cache. This should fix it.
callumbr1 said:
https://dl.twrp.me/zeroltespr/
Townload and flash twrp, from there wipe dalvik cache. This should fix it.
Click to expand...
Click to collapse
Did that .. it just says starting apps... optimizing app xx of 56. . always reboots and starts over and over.
Which is the same problem im trying to solve
aniplus said:
Did that .. it just says starting apps... optimizing app xx of 56. . always reboots and starts over and over.
Which is the same problem im trying to solve
Click to expand...
Click to collapse
Try to flash stock again, try to flash with pit file to rebuild the partitions.
callumbr1 said:
Try to flash stock again, try to flash with pit file to rebuild the partitions.
Click to expand...
Click to collapse
where can i get that please?
aniplus said:
where can i get that please?
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/download/102199/G925PVPS4CPI3_G925PSPT4CPI3_SPR/
callumbr1 said:
http://www.sammobile.com/firmwares/download/102199/G925PVPS4CPI3_G925PSPT4CPI3_SPR/
Click to expand...
Click to collapse
I already have that firmware.. was asking about the pit file..
aniplus said:
I already have that firmware.. was asking about the pit file..
Click to expand...
Click to collapse
https://drive.google.com/file/d/0BzyeAt2hy6XeSlF6dk9hTVllWjQ/view
Make sure repartition is checked in odin. Flash it with the firmware
callumbr1 said:
https://drive.google.com/file/d/0BzyeAt2hy6XeSlF6dk9hTVllWjQ/view
Make sure repartition is checked in odin. Flash it with the firmware
Click to expand...
Click to collapse
Thanks for the file.. However, i just flashed it and its still the same rebooting loop..
Odin Flashes Succesfully..
then the system reboots and shows "installing system update"
at 32% it stops
then it shows "erasing"
then it restarts..
then shows android is starting...
optimizing apps xxx of 56...
before it gets to 56 it reboots , and keeps rebooting
aniplus said:
Thanks for the file.. However, i just flashed it and its still the same rebooting loop..
Odin Flashes Succesfully..
then the system reboots and shows "installing system update"
at 32% it stops
then it shows "erasing"
then it restarts..
then shows android is starting...
optimizing apps xxx of 56...
before it gets to 56 it reboots , and keeps rebooting
Click to expand...
Click to collapse
Im not entirely sure then to be honest, flashing stock should fix it along with data wipe and cache wipe.
Maybe one of the optimising apps is corrupted forcing it to reboot, but again a stock flash should replace everything.
You could try flashing a different region firmware like this...
http://www.sammobile.com/firmwares/download/102229/G925PVPS4CPI3_G925PSPT4CPI3_BST/
But again im not 100% sure it will work
Related
Hi!
My mother's galaxy ACE GT-S5830i stopped working while she was on holiday. It had never been rooted or anything.
I tried recovering it, but it stops on "Formating /data" and nothing else happens.
I also can't leave the recovery mode, when i select "reboot now", the screen is stuck on "-- Applying Multi-CSC --".
I also flashed the stock firmware with ODIN but after it had been flashed, the phone rebooted and got stuck on "-- Applying Multi-CSC --" again.
Has anybody any idea how i could solve this issue?
Thanks!
[email protected] said:
Hi!
My mother's galaxy ACE GT-S5830i stopped working while she was on holiday. It had never been rooted or anything.
I tried recovering it, but it stops on "Formating /data" and nothing else happens.
I also can't leave the recovery mode, when i select "reboot now", the screen is stuck on "-- Applying Multi-CSC --".
I also flashed the stock firmware with ODIN but after it had been flashed, the phone rebooted and got stuck on "-- Applying Multi-CSC --" again.
Has anybody any idea how i could solve this issue?
Thanks!
Click to expand...
Click to collapse
Flash with pit and a multi package stock firmware.
vainxs said:
Flash with pit and a multi package stock firmware.
Click to expand...
Click to collapse
thanks, it finally worked with a Spanish software and cleaning /data just after install and before first boot
Sadly, the problem appeard again after one day, while my mother was trying to install apps from the play store
i did it again, and until now it is working ok, but I really hope it's not gonna brick itself again...
[email protected] said:
Sadly, the problem appeard again after one day, while my mother was trying to install apps from the play store
i did it again, and until now it is working ok, but I really hope it's not gonna brick itself again...
Click to expand...
Click to collapse
Beno, same problem!
i got the flash with Odin succesully but when auto-reboot, the phone was stuck on
"Appling Multi CSC" message
Can u tell me which is your step by step procedure and which packages you have used?
thanx
Have searched through the posts but could not find a solution.
Flashed 5.1.1 stock firmware via odin couple of times. Even changed Odin from version 3.10.6 to 3.10.7. Still stuck on the Samsung Galaxy S6 edge powered by android screen. Have tried the recovery mode reset and wipe cache but to no avail.
Flashing via Odin was successful, then it reboots and the blue screen comes on "Erasing....." I don't think the Erasing thing gets completed and it reboots to the boot screen and stays there.
At the moment downloading the 5.0.2 firmware. Any help would be appreciated.
Seems downgrading is not a possibility. Have flashed the 5.1.1 firmware. Still stuck at boot. The reboot after flashing shows the blue scree and a task bar slowly filling up, then the "Erasing..." part starts and reboots and stays at the Galaxy S6 edge screen. Seems the Reactivation is on, and there's a "dm-verity verification failed...." on the bottom of the recovery.
Could be a corrupted download. Try downloading the 5.1.1 firmware again.
Rosies said:
Could be a corrupted download. Try downloading the 5.1.1 firmware again.
Click to expand...
Click to collapse
Thanks, will give it a go. Previous was downloaded from Sammobile.....any other safe sites?
I am having the same problem. I have been trying to fix this for almost a month but nothing is working. I had to buy another phone. Could you post if you find a solution? Thanks
Sent from my SM-N920P using XDA Free mobile app
bcombel said:
I am having the same problem. I have been trying to fix this for almost a month but nothing is working. I had to buy another phone. Could you post if you find a solution? Thanks
Sent from my SM-N920P using XDA Free mobile app
Click to expand...
Click to collapse
I will do if it works out. At the moment it's still the same. Downloaded the firmware again and back to square one......if anyone can solve it it's the people here, so still hoping....
Nothing seems to work. Smart Switch and Kies3 say "not supported device". Tried flashing TWRP, have that activation lock error. For the moment have a $600 paper weight
Halfbaked156 said:
Nothing seems to work. Smart Switch and Kies3 say "not supported device". Tried flashing TWRP, have that activation lock error. For the moment have a $600 paper weight
Click to expand...
Click to collapse
on the same boat.
its just my 3 rd day got the phone.
let me know if you have any luck.
bought the phone this Wednesday from JB HIFI, Sydney, Australia, 64GB, on the first day i update the phone to the latest stock rom 5.1.1 which is LMY47X.G925IDVU2DOI2.
Firstly, i installed TWRP and rooted the s6 successfully using TWRP Recovery 2.8.7.1 and Root for G925F Android 5.1.1 (unofficial).
Then I was trying to install custom rom. but i format the data in TWRP without backup anything, like efs.
1.Flashed the stock rom (G925IDVU2DOI2_G925IXSA2DOI2_XSA.zip) from sammobile.com odin with no errors. (I downloaded twice from different sources)
after, reboot. it shows cant find /cache and /system.
It shows dm-verity verification failed.
and then shows the stock recovery mode
then i use odin and flashed the TWRP from the above post, and it shows internal storage 0MB.
Checked Samsung Galaxy S6/S6 Edge PAC Firmware/PIT File Collection
The pac and pit file is not released yet.
Adb & Fastboot not working, it cant detect the device.
Smart switch didnt work, shows unsupported device.
is it the partition messed up?
Halfbaked156 said:
Have searched through the posts but could not find a solution.
Flashed 5.1.1 stock firmware via odin couple of times. Even changed Odin from version 3.10.6 to 3.10.7. Still stuck on the Samsung Galaxy S6 edge powered by android screen. Have tried the recovery mode reset and wipe cache but to no avail.
Click to expand...
Click to collapse
Install Unikernel via Odin, and then install a ROM through TWRP.
Uzair40 said:
Install Unikernel via Odin, and then install a ROM through TWRP.
Click to expand...
Click to collapse
Unikernal flashing did not work....Custom...something...R/L was the message. So the problem is the Reactivation Lock on?
Halfbaked156 said:
Unikernal flashing did not work....Custom...something...R/L was the message. So the problem is the Reactivation Lock on?
Click to expand...
Click to collapse
I remembered that i saw the R/L message on my phone yesterday too, yes, it it about the reactivation lock,
i went to the security setting and switch off the find my mobile remotely. and that message disappeared.
hi.
i used custom rom and my phone work good without problem but suudenly restart and hang on galaxy s6 edge and somtimes on samsung.
odin mode is work without any problem and flash without any problem.
i tried stock rom 6.0.1 G925FXXU3DPC2 but still problem.
i go to stock recovery and wipe cache and factory reset but still problem. stock recovey somtimes work somtimes hang but arter97 twrp3.0.2 is work perfect without hang and flash anything from recovey.
custom rom flash in recovery without problem but still problem with boot.
any idea??
:crying::crying::crying:
mehdips3 said:
hi.
i used custom rom and my phone work good without problem but suudenly restart and hang on galaxy s6 edge and somtimes on samsung.
odin mode is work without any problem and flash without any problem.
i tried stock rom 6.0.1 G925FXXU3DPC2 but still problem.
i go to stock recovery and wipe cache and factory reset but still problem. stock recovey somtimes work somtimes hang but arter97 twrp3.0.2 is work perfect without hang and flash anything from recovey.
custom rom flash in recovery without problem but still problem with boot.
any idea??
:crying::crying::crying:
Click to expand...
Click to collapse
Firmware is corrupted.
Flash this and you will be back up and fixed
It's BTU 6.0.1 firmware
https://drive.google.com/folderview?id=0B40ItdHKfkyQWmE5bTNiVzN3bTg
Let me know how you get on.
callumbr1 said:
Firmware is corrupted.
Flash this and you will be back up and fixed
It's BTU 6.0.1 firmware
https://drive.google.com/folderview?id=0B40ItdHKfkyQWmE5bTNiVzN3bTg
Let me know how you get on.
Click to expand...
Click to collapse
thanks but still problem
mehdips3 said:
thanks but still problem
Click to expand...
Click to collapse
Tell me exactly what happens
why my system status is not change even flash stock rom.
callumbr1 said:
Tell me exactly what happens
Click to expand...
Click to collapse
frist flash rom without pit after flash reset and bluescreen for install system update come and after a while rest and samsung logo come with blue led flash but after a second hang.
wipe cache and factory rest from recovery but still problem.
after that flash rom with pit file and still problem.
in recovery when use reboot option phone hang on Dm-verity verification check and i use hard rest.
somtimes led is white blinking.
in twrp recovery i don't have any problem.
sorry for my bad english.
very thanks
mehdips3 said:
frist flash rom without pit after flash reset and bluescreen for install system update come and after a while rest and samsung logo come with blue led flash but after a second hang.
wipe cache and factory rest from recovery but still problem.
after that flash rom with pit file and still problem.
in recovery when use reboot option phone hang on Dm-verity verification check and i use hard rest.
somtimes led is white blinking.
in twrp recovery i don't have any problem.
sorry for my bad english.
very thanks
Click to expand...
Click to collapse
Dm verity verification failed is problem with Imei.
Have you tried to flash the firmware that I posted?
1st - go into download mode on device. Hold home power and up.
Plug device in to odin.. on odin it should have blue box saying COM:1 or something like that.
Extract the firmware and put the .tar file in AP.
Make sure auto reboot and re partition are UNCHECKED.
Then start.
Try this and post a screenshot on here of odin one it's finished.
I had exactly the same issue and flashing this firmware fixed it.
callumbr1 said:
Dm verity verification failed is problem with Imei.
Have you tried to flash the firmware that I posted?
1st - go into download mode on device. Hold home power and up.
Plug device in to odin.. on odin it should have blue box saying COM:1 or something like that.
Extract the firmware and put the .tar file in AP.
Make sure auto reboot and re partition are UNCHECKED.
Then start.
Try this and post a screenshot on here of odin one it's finished.
I had exactly the same issue and flashing this firmware fixed it.
Click to expand...
Click to collapse
i do it but still problem.
:crying::crying:
mehdips3 said:
i do it but still problem.
:crying::crying:
Click to expand...
Click to collapse
very thanks for your help my problem is gone.
i apperciate you.
have a nice day.:fingers-crossed::fingers-crossed::laugh::laugh:
mehdips3 said:
very thanks for your help my problem is gone.
i apperciate you.
have a nice day.:fingers-crossed::fingers-crossed::laugh::laugh:
Click to expand...
Click to collapse
Your welcome! Glad I could help
callumbr1 said:
Your welcome! Glad I could help
Click to expand...
Click to collapse
i have same problem like this guy here. i cant fix my phone. I cant use custom roms. or stock roms. any idea?
lastest try is G925FXXU4DPGW_G925FBTU4DPH1_G925FXXU4DPGW without fixing via odin, no errors with odin, just blue screen, and stuck on android is starting apps is starting, 60 apps instal, and after that phone freze on android is startin. Official is DBT but they dont have update4 for replacing 4dpgw.
in download mode i have this Ap SWREV: B:4 K:2 S:2 allways
simche95za said:
i have same problem like this guy here. i cant fix my phone. I cant use custom roms. or stock roms. any idea?
lastest try is G925FXXU4DPGW_G925FBTU4DPH1_G925FXXU4DPGW without fixing via odin, no errors with odin, just blue screen, and stuck on android is starting apps is starting, 60 apps instal, and after that phone freze on android is startin. Official is DBT but they dont have update4 for replacing 4dpgw.
in download mode i have this Ap SWREV: B:4 K:2 S:2 allways
Click to expand...
Click to collapse
Boot into recovery, wipe cache partition and factory data reset. This should fix it.
If it sticks on android is starting just wait. It can take a while.
If this doesn't work let me know
Similar Problem
My phone was running stock lollipop and then I tried to update to marshmallow via odin. It all went well and phone is stuck in a bootloop. I can't access recovery but I can still go to download mode and I tried flashing again via odin. It says pass but phone is still in boot loop. Can u help me out.
muwahhid25 said:
My phone was running stock lollipop and then I tried to update to marshmallow via odin. It all went well and phone is stuck in a bootloop. I can't access recovery but I can still go to download mode and I tried flashing again via odin. It says pass but phone is still in boot loop. Can u help me out.
Click to expand...
Click to collapse
Try to flash a different stock firmware.
First though... in odin flash twrp recovery.
Boot into recovery and wipe cache partition and wipe data. Then restart phone. This should work. If not try the first step (flash a different stock)
https://www.youtube.com/watch?v=ze5WDUZPE2A this is my problem, any software i flash, gone erasing and delete somthing, then go to blackscreen. phone is g925f BTU version, but i updated it for lastest G925FXXU4DPGW_G925FBTU4DPH1_G925FXXU4DPGW_HOME.tar ! i need HELP!
simche95za said:
this is my problem, any software i flash, gone erasing and delete somthing, then go to blackscreen. phone is g925f BTU version, but i updated it for lastest G925FXXU4DPGW_G925FBTU4DPH1_G925FXXU4DPGW_HOME.tar ! i need HELP!
Click to expand...
Click to collapse
Boot into recovery, wipe cache partition. Wipe data factory reset. Then flash again
callumbr1 said:
Boot into recovery, wipe cache partition. Wipe data factory reset. Then flash again
Click to expand...
Click to collapse
doesnt work. i try wipe cash data with samsung recovery, try with twrp recovery, and try with philtz recovery format all boot cache modem system dada, all, doesnt work, always stay bootloader and modem i think. But i dont know why, cant find system for my phone who can accept this bootloader and modem.
simche95za said:
doesnt work. i try wipe cash data with samsung recovery, try with twrp recovery, and try with philtz recovery format all boot cache modem system dada, all, doesnt work, always stay bootloader and modem i think. But i dont know why, cant find system for my phone who can accept this bootloader and modem.
Click to expand...
Click to collapse
Maybe you can try flashing this 2016-07-22-6.0.1-BTU-G925FXXS4DPG2-1teilig.zip in odin ?
Can you give the screenshot or log from Odin ?
Good luck
Hi everybody,
Yesterday I decided I wanted to root my S6 Edge phone (SM-G925F, International Version) and flash a custom ROM onto it. I managed to root it successfully and install a working version of TWRP.
I began installing the XtreStoLite Custom ROM onto my S6 Edge. Around the 10% mark of installation, my phone suddenly booted. I read online that I should boot back normally and install an app which reduces my CPU power or something like that, can't really remember. But when I tried to boot back normally, it was stuck in a boot loop with only the Samsung S6 Edge logo appearing.
During installing TWRP I bricked my phone a couple of times because I installed wrong versions of TWRP. I flashed a stock firmware a few times to get rid of the brick (a similar bootloop), which worked every time like a charm.So I figured that with this "Custom ROM bootloop", I can just flash the stock firmware, boot everything back and try again. But after flashing the previously so glamorously working stock FW, I was stuck in a bootloop way worse than before.
This time the phone starts, I get the S6 edge logo, I get a "installing software update" screen for about a millisecond and then a "no command" screen. After the latter, it repeats. Once repeated for - I don't know - a 1000 times, it boots into stock recovery.
I tried factory resetting, which only gets rid of "software update" and "no command" screens. The bootloop stays.
What do you suggest I do? Can I do anything? Could it possibly work with 'another' stock firmware file?
Thanks in advance :good:
Probably you end up with dm verify verification error, drk issue, try to flash back stock firmware using repartition and a pit file to see if will fix your issue
Thanks for the quick reply mate. Just to get this right, I don't want to mess anything else up: first, I download a new firmware from lets say, SamMobile. When flashing with Odin, I check the box re-partition. What do I do with the pit file? If I download the FW from SamMobile, I'm supposed to get a CSC file right? With the pit file inside of it? Will Odin recognize it just like that (from the CSC file)?
you must download pit file and add in pit file, depending on your csc code of firmware you want to flash search that pit file on google
Okay, thanks. I googled and found this website: droidviews.com/download-pit-files-for-galaxy-s6-edge-all-models/
You figure I could just use a pit file downloaded from there? Or should I worry about 32GB / 64 GB pit files?
Also found this website: sammobile.com/forum/showthread.php?t=30136
It has an "SM-G925F OXA multi CSC ( BTU CPW DBT ITV KOR NEE XEF XEO XEU )" pit file. My S6 Edge is NEE region marked. Is this any better than the 'droidviews' one? Is it possible to tell or are they one and the same?
jalle65 said:
Also found this website: sammobile.com/forum/showthread.php?t=30136
It has an "SM-G925F OXA multi CSC ( BTU CPW DBT ITV KOR NEE XEF XEO XEU )" pit file. My S6 Edge is NEE region marked. Is this any better than the 'droidviews' one? Is it possible to tell or are they one and the same?
Click to expand...
Click to collapse
You need this firmware
http://updato.com/firmware-archive-select-model?record=85560321743B11E7963AFA163EE8F90B
And this pit file
https://mega.nz/#!rERH1LqK!QSYjirrXtPjKc1giOahnZI0BrWR2WXMg0GI3ZR3LLeY
Or just try to flash your original firmware
Ok so, I flashed the FW callumbr1 suggested, with the required pit file. Something happened! The phone now boots from the S6 Edge screen all the way to the next screen, the one with 'Samsung' text on it. The logo keeps flashing, with it never going away. So still in bootloop, but a little different one.
What now? Thanks for all of the advice thus far!
Its working! Oh thank each and every God, but most of all you guys.
So the phone was stuck in the Samsung boot logo. I booted into recovery, wiped cache, no result. 2nd try, I boot to recovery, do a factory reset, and it SEEMED like it was still in boot loop, with the logo flashing. I went to take a leak and my God, that leak turned out to be a leak of faith. I came back and the phone had booted. Now it seems to work normally.
Thank you so much!
jalle65 said:
Its working! Oh thank each and every God, but most of all you guys.
So the phone was stuck in the Samsung boot logo. I booted into recovery, wiped cache, no result. 2nd try, I boot to recovery, do a factory reset, and it SEEMED like it was still in boot loop, with the logo flashing. I went to take a leak and my God, that leak turned out to be a leak of faith. I came back and the phone had booted. Now it seems to work normally.
Thank you so much!
Click to expand...
Click to collapse
It's because the glowing Samsung logo is not actually a bootloop.
It's just on that logo while the phone builds the firmware. Usually takes about 10-20 minutes on that logo screen. Glad I could help and it's all working :good: thanks the posts if you can
Is your s6 edge bootloader unlocked? If so, how?
I am unable to load TWRP as my bootloader is locked, and can't find a solution anywhere. Any pointers?
callumbr1 said:
You need this firmware
http://updato.com/firmware-archive-select-model?record=85560321743B11E7963AFA163EE8F90B
And this pit file
https://mega.nz/#!rERH1LqK!QSYjirrXtPjKc1giOahnZI0BrWR2WXMg0GI3ZR3LLeY
Or just try to flash your original firmware
Click to expand...
Click to collapse
I'm in the exact same situation as the OP,with the exception that i cant even get to recovery
(I got the phone in that situation tbh so i dunno what happened)
I tried to flash the firmware and the pit file you provided but i got a cm.img error and binary error device 5 binary 4.
So i guess device had newer os installed.
I'm now trying to download(those sammob speed limits ) the newest btu file my question is the pit file you provided is for every btu firmware or do i need another one?
razenxd said:
I'm in the exact same situation as the OP,with the exception that i cant even get to recovery
(I got the phone in that situation tbh so i dunno what happened)
I tried to flash the firmware and the pit file you provided but i got a cm.img error and binary error device 5 binary 4.
So i guess device had newer os installed.
I'm now trying to download(those sammob speed limits ) the newest btu file my question is the pit file you provided is for every btu firmware or do i need another one?
Click to expand...
Click to collapse
Yes try the latest firmware.
The pit file will work for every btu firmware aslong as you have G925F. If it fails quote me and I'll try to help further
callumbr1 said:
Yes try the latest firmware.
The pit file will work for every btu firmware aslong as you have G925F. If it fails quote me and I'll try to help further
Click to expand...
Click to collapse
I've downloaded the latest BTU firmware with samfirm and flashed it along with the pit file
Again i got the updating screen which was already on 25% jumped to 32% and then got to erasing screen in which the refreshing icon froze.
I'm waiting for it to make something but nope.
razenxd said:
I've downloaded the latest BTU firmware with samfirm and flashed it along with the pit file
Again i got the updating screen which was already on 25% jumped to 32% and then got to erasing screen in which the refreshing icon froze.
I'm waiting for it to make something but nope.
Click to expand...
Click to collapse
See if you can manually boot to recovery. If so then wipe data and cache and reboot
callumbr1 said:
See if you can manually boot to recovery. If so then wipe data and cache and reboot
Click to expand...
Click to collapse
i can't.
It passes in some milisecs the updating screen and gettting me to the no command screen.
razenxd said:
i can't.
It passes in some milisecs the updating screen and gettting me to the no command screen.
Click to expand...
Click to collapse
Hold down and power until it completely reboots. As soon as it goes off switch to recovery combo and keep holding
callumbr1 said:
Hold down and power until it completely reboots. As soon as it goes off switch to recovery combo and keep holding
Click to expand...
Click to collapse
That's what i do, and i get what i said in the previous post
Now will try and give a flash the 4 file btu repair firmware which i downloaded from samfirm app along with the
ZEROLTE_EUR_OPEN.pit
Should i also check repartition and nand erase all in odin?
razenxd said:
That's what i do, and i get what i said in the previous post
Now will try and give a flash the 4 file btu repair firmware which i downloaded from samfirm app along with the
ZEROLTE_EUR_OPEN.pit
Should i also check repartition and nand erase all in odin?
Click to expand...
Click to collapse
Only check repartition if you flash a pit file. Don't select nand erase
callumbr1 said:
Only check repartition if you flash a pit file. Don't select nand erase
Click to expand...
Click to collapse
That's what i did.
Fingers crossed
Edit: Now stucked in galaxy s6 edge screen before samsung logo.
Edit 2 : Tried to access recovery, phone got again in system update screen and then stuck on erasing
rebooted then tried to access recovery again and got the no command screen again.
Edit 3 : After several attempts to access recovery it got me to the black screen before the wipe options of recovery appeared and phone hang up.
It has the following
No Support SINGLE-SKU
Supported API: 3
#MANUAL MODE v1.0.0#
Appling Multi-CSC
Applied The CSC Code :XEO
Succesfully applied multi-csc
Hum, just noticed in download mode that the device has on the reactivation lock.
Could that be one problem that i face?
Hi i was wondering if there is a way i would be able to find out information about my device such as the bootloader id so i can find the correct stock rom for my boot looped samsung s6 edge. Is there a way to view crash/bug reports i have sent to google play previously as they normally hold that type of info
iCrazyGaming said:
Hi i was wondering if there is a way i would be able to find out information about my device such as the bootloader id so i can find the correct stock rom for my boot looped samsung s6 edge. Is there a way to view crash/bug reports i have sent to google play previously as they normally hold that type of info
Click to expand...
Click to collapse
Did you tried to wipe cache, dalvick on recovery mode?
And it should written at your phone package
S6 edge is G925
But have models
Like G925F or S(don't remember exactly, you should check it)
amirizad_7436 said:
Did you tried to wipe cache, dalvick on recovery mode?
And it should written at your phone package
S6 edge is G925
But have models
Like G925F or S(don't remember exactly, you should check it)
Click to expand...
Click to collapse
Thanks for the reply. My phone is stock so didn't have a custom recovery. Also i checked the box but it doesn't tell you the info about the bootloader that you need to dowload the correct stock rom
iCrazyGaming said:
Thanks for the reply. My phone is stock so didn't have a custom recovery. Also i checked the box but it doesn't tell you the info about the bootloader that you need to dowload the correct stock rom
Click to expand...
Click to collapse
No need to twrp
Just go to stock recovery mode and wipe cache partition and wipe cache/reset factory
Do both
Last night my friend has same problem as you
It solved
amirizad_7436 said:
No need to twrp
Just go to stock recovery mode and wipe cache partition and wipe cache/reset factory
Do both
Last night my friend has same problem as you
It solved
Click to expand...
Click to collapse
It's abit too late for that lol. I already tried flashing it with a stock rom i thought was the right one but now get a failed to update screen when i try turning on my device. The battery is totally drained and doesn't hold it charge. I can only get into dowload mode that's why i need to somehow get all the correct info but not having any luck
iCrazyGaming said:
It's abit too late for that lol. I already tried flashing it with a stock rom i thought was the right one but now get a failed to update screen when i try turning on my device. The battery is totally drained and doesn't hold it charge. I can only get into dowload mode that's why i need to somehow get all the correct info but not having any luck
Click to expand...
Click to collapse
Check the information above screen at download mode
Should have model
As I said look for G925*
And * is your phone model that can solve your problem
GL
amirizad_7436 said:
Check the information above screen at download mode
Should have model
As I said look for G925*
And * is your phone model that can solve your problem
GL
Click to expand...
Click to collapse
It's a SM-G925F but I've heard you need to find your specific info or it wont flash because it just sits at instalization on odin
amirizad_7436 said:
Check the information above screen at download mode
Should have model
As I said look for G925*
And * is your phone model that can solve your problem
GL
Click to expand...
Click to collapse
When i tried flashing it with a BTU stock rom for my device model odin would fail at certain points and i was told to unpack to rom and flash the files individually and it would flash but i would still be stuck on a bootloop so i got told to try flash twrp and ever since i did odin just get stuck on instalization for about 20 mins then will just say it fails
iCrazyGaming said:
When i tried flashing it with a BTU stock rom for my device model odin would fail at certain points and i was told to unpack to rom and flash the files individually and it would flash but i would still be stuck on a bootloop so i got told to try flash twrp and ever since i did odin just get stuck on instalization for about 20 mins then will just say it fails
Click to expand...
Click to collapse
Wait Wait!
A Little confused
So yours is G925A
1-Did you flashed stock rom via Odin?(G925A)
2-Did it passed?
3-Did you use latest Odin?
amirizad_7436 said:
Wait Wait!
A Little confused
So yours is G925A
1-Did you flashed stock rom via Odin?(G925A)
2-Did it passed?
3-Did you use latest Odin?
Click to expand...
Click to collapse
No it's a G925F.
1.Yes i used odin to try and flash stock rom but it failed.
2. No
3. Yes i used the latest and a few other versions that people said worked best but had no luck with any 9f them
Can flashing your phone take up more storage on your device because i have tried around 3 different roms and know i didn't have much storage left so could this be why odin will no longer flash?
I'm just wondering if there is a way to find the phones baseband version so i can get the correct stock rom
iCrazyGaming said:
I'm just wondering if there is a way to find the phones baseband version so i can get the correct stock rom
Click to expand...
Click to collapse
Your phone is G925f
That's all you need to download a stock rom
Other words change with every update
Would you please pm me at telegram
My ID is same as here