Hi
change settings through USB?
I have a lumia 925, with screen and touch broken, so I managed to install last firmware with recovery tools, and phone boot normal. but I can't enable "project my screen" because screen is black and touch doesn't work.
There is a way to enable/disable this option using USB conection? (Like ADB tools on android?
thanks
Related
hello there,
I'm using Galaxy S1 I9000, and my screen just got broken, and shows nothing now (black screen).
I have found this PC software that allows me to see my android device screen Via my computer.
Unfortunately my "USB debugging mode" wasn't turned on, so I am not able to use this software.
I'm able to get inside CWM mode, but I do not know how to enable this option .
so my question is, is there any way to enable usb debugging mode through CWM on the device and ADB on my computer??
I have tried to use the ADB software but when I enter: "adb devices" it shows no devices.
any solution to my problem without buying a new screen?
I used SLIMROM with JB, has CWM 6.
Thank you.
Hi guys!
I have a Galaxy S3 with broken display and (MHL tested) broken digitizer.
Device works, I get home screen but can't unlock.
I would rescue the smartphone and I think that the way is using ADB (with [email protected], screencast or similar).
I don't have alternatives right?
The problem is that I can't use ADB cause actually it does not have USB debugging enabled.
Just a couple of questions:
Can I use ADB in recovery mode (without USB debugging)?
With MHL I get broadcast in home screen, not before, is that normal? How about MHL in recovery mode?
I can only imagine a solution: Go in recovery mode and execute a "no-look" change of ROM installing something with USB debugging option enabled by default.
Do you have other solutions?
Who can help me doing this? Does exist a "how-to" somewhere? Which ROM?
Thanks!!
Hello,
i had the same problem, i could solve it. Here is how i did it:
Click.
I first had to root the phone and also get a recovery on it (i think it enabled ADB).
The problem is the broken digitizer. You can't use the USB-Debugging because you need to confirm a popup from Android (i think it depends on the Version of Android).
Hope it helps.
Hey guys,
I've been given an SGS3 (I9305T) with a dead screen. I've managed to gain access via an 11-pin HDMI cable, and then from my laptop using Mobizen which gives me access to ADB.
I'm attempting to use it as a reversing camera; which is proving surprisingly effective! however, I need to be able to restart it on power connected (should it ever go flat)... and I'm stuck for options.
I would have tried 'fastboot oem-off-mode-charge 0', EXCEPT for the fact that fastboot isn't enabled on Samsungs :/
Is there any other options available that might enable this feature? Alternate kernel? build.prop mod? This detailed LG attempt??
Hi there,
I have a samsung galaxy s3 i9300 with broken display and I need to run a software to recover deleted files on the memory of the phone. This software requires to doo usb debugging to the phone in order to do its job. I was already able to enable it changing buold.prop using adb in recovery mode. Now the phone waits for the user to touch the "ok" button in order to allow the pc, unfurtunately my display is broken so I can't do it. Do you have any idea on how to let the phone accept adb/usb debugging connections from my pc, or to completely disable the confirmation box and accept the requests automatically?
Does your touch screen still register touch? If so, I'd try borrowing same model of phone from a friend, connecting it to computer to see where exactly is the OK button, then try to tap same location on the broken screen of your phone>
Hello, i saw many people had the same problem with me and no one posted a solution.
This may work on other xiaomis also.
The solution is for working phone and touch screen but no display. Black screen.
First you will needed to install all the adb and drivers for your phone.
Then you will need mi pc suite.
Boot your phone and conect it to your pc
From suite you can see your screen.
( this is the hard one)
α) Go to Settings -- About Phone --> Touch 7 times on "MIUI version" to Enable Developer Options.
β) Now go to Settings - Additional Settings - Developer Options --> USB debugging. Enable USB Debugging and
Connect to PC.
If it will be asked then click always on this pc
Now again on your phone go to updater and click on the top right ( hidden menu)
and press go to recovery.
Make the wipe and reboot.
This worked for me, it was the only way to access the recovery.
Hope i helped.
If this will not work then try to flash the chinese developer rom through miflash and then do this moves again.