Hello, i saw many people had the same problem with me and no one posted a solution.
This may work on other xiaomis also.
The solution is for working phone and touch screen but no display. Black screen.
First you will needed to install all the adb and drivers for your phone.
Then you will need mi pc suite.
Boot your phone and conect it to your pc
From suite you can see your screen.
( this is the hard one)
α) Go to Settings -- About Phone --> Touch 7 times on "MIUI version" to Enable Developer Options.
β) Now go to Settings - Additional Settings - Developer Options --> USB debugging. Enable USB Debugging and
Connect to PC.
If it will be asked then click always on this pc
Now again on your phone go to updater and click on the top right ( hidden menu)
and press go to recovery.
Make the wipe and reboot.
This worked for me, it was the only way to access the recovery.
Hope i helped.
If this will not work then try to flash the chinese developer rom through miflash and then do this moves again.
Related
my pantech sky vega a760s got soft bricked
here's what happened:
-the phone won't open unless connected to pc
-when connected, it will only go to charging mode
-when i try to enter recovery mode, this shows up:
"your phone will restart due to error occurred while running application "
i cannot access recovery mode, the only thing i can access is the s/w upgrade mode, which i don't know how to use since i'm not korean
and i can't understand pantech's website.
also, when i enter in fastboot mode, all drivers are installed except for a driver named "Android" which is too general for me to manual search (inlcuded an image attachment of the failed driver)
How can I unbrick my phone?
PLEASE HELP. THANK YOU IN ADVANCE.
same here..
same here my sky vega a760 stock on boot image anyone can help plsss how can i revive this..plsssss.
joekap said:
same here my sky vega a760 stock on boot image anyone can help plsss how can i revive this..plsssss.
Click to expand...
Click to collapse
You should re-install new room stook via home page iVeGa:good:
Re: Help..
tnx for the reply but how can i reinstall i dont know where to donwload and i cant understand in korean site.. plsss send me working rom for A760s plsss...tnx
[TUT]Recovery Mode Sky Vega Racer IM-A760S/A770K
joekap said:
tnx for the reply but how can i reinstall i dont know where to donwload and i cant understand in korean site.. plsss send me working rom for A760s plsss...tnx
Click to expand...
Click to collapse
To go into Soft/Ware download mode
1. Turn of phone
2. Simultaneously press: VOLUME UP + MENU + POWER
3. S/W Upgrading will now flash on the screen
To upgrade firmware back to version 1.47, you first need to have the UniUSBdriver installed on your computer.
4. After you have installed the driver, test your phone’s connection to the computer to initially determine all the required drivers were installed properly (this is while your phone is in S/W download mode). But before doing this, make sure that you have activated USB DEBUGGING on your phone.
Code:
>settings
>applications
>development
>usb debugging (must be checked)
5. Using Microsoft Internet Explorer v8 or v9, proceed to this page:
-------------->>> dmfile.isky.co.kr/NewSelfUpgrade/index.html?userid=&hpno
Notice when that page opens, it will prompt you to install ACTIVE X. Allow that installation to proceed.
6. After ACTIVE X has been installed, notice on the left side there is a something like loading prompt. Wait until it gets into blue bar with arrow up phrase noting USB with some Korean characters. Then boot to S/W mode your phone and plug it to your compurer then click the blue bar with arrow up.
7. Clicking the Blue bar with arrow up will turn it into a progressing bar. Notice the characters on top of the progress bar may change and at this point there is communication between the phone and the Sky download site. It may take a few minutes for the phone to establish a download connection between Sky’s services. Once a connection is established, the characters above the progress bar will turn into a progressing percentage bar starting from 1% and ending into 100%.
There will be two phases of the progressing percentage bar. The first phase is downloading the software while the second is loading the v1.47 software into the phone. After the 2nd phase, the phone will automatically reboot. The first phase will depend who slow or fast your internet connection is.
:fingers-crossed: Goodluck :fingers-crossed:
clearlangpo said:
To go into Soft/Ware download mode
1. Turn of phone
2. Simultaneously press: VOLUME UP + MENU + POWER
3. S/W Upgrading will now flash on the screen
To upgrade firmware back to version 1.47, you first need to have the UniUSBdriver installed on your computer.
4. After you have installed the driver, test your phone’s connection to the computer to initially determine all the required drivers were installed properly (this is while your phone is in S/W download mode). But before doing this, make sure that you have activated USB DEBUGGING on your phone.
Code:
>settings
>applications
>development
>usb debugging (must be checked)
5. Using Microsoft Internet Explorer v8 or v9, proceed to this page:
-------------->>> dmfile.isky.co.kr/NewSelfUpgrade/index.html?userid=&hpno
Notice when that page opens, it will prompt you to install ACTIVE X. Allow that installation to proceed.
6. After ACTIVE X has been installed, notice on the left side there is a something like loading prompt. Wait until it gets into blue bar with arrow up phrase noting USB with some Korean characters. Then boot to S/W mode your phone and plug it to your compurer then click the blue bar with arrow up.
7. Clicking the Blue bar with arrow up will turn it into a progressing bar. Notice the characters on top of the progress bar may change and at this point there is communication between the phone and the Sky download site. It may take a few minutes for the phone to establish a download connection between Sky’s services. Once a connection is established, the characters above the progress bar will turn into a progressing percentage bar starting from 1% and ending into 100%.
There will be two phases of the progressing percentage bar. The first phase is downloading the software while the second is loading the v1.47 software into the phone. After the 2nd phase, the phone will automatically reboot. The first phase will depend who slow or fast your internet connection is.
:fingers-crossed: Goodluck :fingers-crossed:
Click to expand...
Click to collapse
i need help. i just installed uniUSBdriver and it's successful. however, when i connect the phone there is one driver that is unable to install. the driver is just called "android" tried to look everywhere for a manual installer but the name of the driver is too vague to search. can you please help me with this one? it seems like the self upgrade site can't detect the phone without this driver installed.
Solution Soft brick, Android drivers in Fastboot
jimmygammi said:
i need help. i just installed uniUSBdriver and it's successful. however, when i connect the phone there is one driver that is unable to install. the driver is just called "android" tried to look everywhere for a manual installer but the name of the driver is too vague to search. can you please help me with this one? it seems like the self upgrade site can't detect the phone without this driver installed.
Click to expand...
Click to collapse
1. Connect your phone in Fastboot, and when your pc asks for 'Android' drivers, you need to install PDAnet, just google to download it.
2. then to Fastboot, and Install Recovery SWM v6 either normal or touch
3. Then go to Recovery and Install new stock/custom rom from SdCard.
thats all. :fingers-crossed:
bobby786pk said:
1. Connect your phone in Fastboot, and when your pc asks for 'Android' drivers, you need to install PDAnet, just google to download it.
2. then to Fastboot, and Install Recovery SWM v6 either normal or touch
3. Then go to Recovery and Install new stock/custom rom from SdCard.
thats all. :fingers-crossed:
Click to expand...
Click to collapse
can you post links where to get the recovery image and a link where to download roms? i'm trying to search but no luck. your help will be really appreciated. thank you very much :laugh:
stuck at s/w uploading
heeelp can anyone help me... my a760s dont turn on and if i plug a charger or into a pc the only thing that apears is "s/w uploading"
Did you fix it? results?
beakolang said:
heeelp can anyone help me... my a760s dont turn on and if i plug a charger or into a pc the only thing that apears is "s/w uploading"
Click to expand...
Click to collapse
Although its long enough for you to forget you once had Sky 760 but did you try the method posted by "clearlangpo"?
You phone reincarnated anyway?
clearlangpo said:
To go into Soft/Ware download mode
1. Turn of phone
2. Simultaneously press: VOLUME UP + MENU + POWER
3. S/W Upgrading will now flash on the screen
To upgrade firmware back to version 1.47, you first need to have the UniUSBdriver installed on your computer.
4. After you have installed the driver, test your phone’s connection to the computer to initially determine all the required drivers were installed properly (this is while your phone is in S/W download mode). But before doing this, make sure that you have activated USB DEBUGGING on your phone.
Code:
>settings
>applications
>development
>usb debugging (must be checked)
5. Using Microsoft Internet Explorer v8 or v9, proceed to this page:
-------------->>> dmfile.isky.co.kr/NewSelfUpgrade/index.html?userid=&hpno
Notice when that page opens, it will prompt you to install ACTIVE X. Allow that installation to proceed.
6. After ACTIVE X has been installed, notice on the left side there is a something like loading prompt. Wait until it gets into blue bar with arrow up phrase noting USB with some Korean characters. Then boot to S/W mode your phone and plug it to your compurer then click the blue bar with arrow up.
7. Clicking the Blue bar with arrow up will turn it into a progressing bar. Notice the characters on top of the progress bar may change and at this point there is communication between the phone and the Sky download site. It may take a few minutes for the phone to establish a download connection between Sky’s services. Once a connection is established, the characters above the progress bar will turn into a progressing percentage bar starting from 1% and ending into 100%.
There will be two phases of the progressing percentage bar. The first phase is downloading the software while the second is loading the v1.47 software into the phone. After the 2nd phase, the phone will automatically reboot. The first phase will depend who slow or fast your internet connection is.
:fingers-crossed: Goodluck :fingers-crossed:
Click to expand...
Click to collapse
Hello Hacker!
I am Zahid Gill and a software engineer by profession. Websites are my speciality. I love android and Korean phones. I have bricked/ unbricked fixed and patched many phone before (but only with XDA's help ) many
While flashing Sky vega 760s it stuck on some point. I waited long enough but thenI had to remove it and.... it was bricked.
I was still able to go to recovery, fastboot and bootloader. I tried wiping /system and others but cwm was not able to.
I tried flashing with offline flasher tool again but it went into red screen on bootloader, like here:
http://sphotos-g.ak.fbcdn.net/hphotos-ak-prn1/p206x206/26340_10200120329905648_1168156367_n.jpg
NOW, offline flashing stuck on 60%. I am unable to boot the phone in any other mode. Even putting on charging takes phone to this red s/w mode.
Are you able to help me with this? I shall be very thankful.
PS: I had stock ROM 4.1.2 originally updated with no custom tickling.
Did you find any solution
Hello I also stuck in same situation. My phone ima-760 got soft brick and red S/w upgrading only. Kindly help if any one has a solution.
Buddy
jimmygammi said:
my pantech sky vega a760s got soft bricked
here's what happened:
-the phone won't open unless connected to pc
-when connected, it will only go to charging mode
-when i try to enter recovery mode, this shows up:
"your phone will restart due to error occurred while running application "
i cannot access recovery mode, the only thing i can access is the s/w upgrade mode, which i don't know how to use since i'm not korean
and i can't understand pantech's website.
also, when i enter in fastboot mode, all drivers are installed except for a driver named "Android" which is too general for me to manual search (inlcuded an image attachment of the failed driver)
How can I unbrick my phone?
PLEASE HELP. THANK YOU IN ADVANCE.
Click to expand...
Click to collapse
I have the same problem but a lot of the answers are to re-install stock? Which part don't they understand...it's BRICKED ( and only shows the RED S/W Upgrading symbol) so it's impossible to Flash stock firmware in that state?
this is my first time asking a question here, as I just got my first android phone yesterday.
The phone is a UMI MAX. I went to reboot it today, and now its just forever showing the boot logo without starting.
I have already tried 'Recovery mode > Factory Reset > Wipe cache partition > Reboot', but that doesn't work.
I have tried flashing it back to the original ROM (from the official forums), but SP flash can't detect my phone, even after installing 'Preloader USB VCOM (Android)' driver. My phones battery cannot be removed so that may be a problem. I also disabled driver signature enforcement (I am on WIN 10)
Also, usb debugging is turned off, and I don't know how to turn it on
I just don't know what else to do
Search your mobile Drivers HERE
Kittey said:
this is my first time asking a question here, as I just got my first android phone yesterday.
The phone is a UMI MAX. I went to reboot it today, and now its just forever showing the boot logo without starting.
I have already tried 'Recovery mode > Factory Reset > Wipe cache partition > Reboot', but that doesn't work.
I have tried flashing it back to the original ROM (from the official forums), but SP flash can't detect my phone, even after installing 'Preloader USB VCOM (Android)' driver. My phones battery cannot be removed so that may be a problem. I also disabled driver signature enforcement (I am on WIN 10)
Also, usb debugging is turned off, and I don't know how to turn it on
I just don't know what else to do
Click to expand...
Click to collapse
flash official Rom From here
Every time I try to connect my phone in order to root it, there is no way windows detects it even after installing Samsung universal USB drivers. Is there some setting I have to enable in the phone? I have already enabled USB debugging still nothing. Please Help. I have tried so many different cords, and even really expensive cords, still nothing but charging only please help.
U have to open Developer Mode from ur setting : about phone, software information, n then touch the Build Number 7 times n ur Developer Mode will be opened.
Go back to setting, u will see Developer Option: n then swift "USB Debugging" on.
Now it will be done.
SXS4 said:
U have to open Developer Mode from ur setting : about phone, software information, n then touch the Build Number 7 times n ur Developer Mode will be opened.
Go back to setting, u will see Developer Option: n then swift "USB Debugging" on.
Now it will be done.
Click to expand...
Click to collapse
See above post ^^ he already enabled usb debugging
Hi,
I have a Redmi note 5, just 5 months old. Recently it fell down and the screen is completely broken. Unable to see the screen and touch is not working. I want to recover data from the phone. I was trying without any luck for past couple of days. Tried following things and none helped.
1. Connected phone to PC via USB cable, but since by default MTP is not enabled internal storage is not displayed.
2. Tried to use MI PC suit but seems like it's not supporting the Android version or MiUi version. I have Android N and MiUi 10. Tried with multiple versions of PC suit and no luck.
3. Reboot to fastboot mode : I don't have debugger option enabled, so only fastboot commands work, adb commands not working. Tried to unlock OEM, flash custom recovery etc: and nothing works! (Next time first thing I'll do with a new phone is enabling debug mode!!)
4. Tried to use Mi account to unlock bootloader but since device is not added into my acount, that also not possible.
5. Tried a bunch of softwares to cast screen to pc or control from pc , but nothing works as debugging not enabled.
I need help if anyone having any other ideas.
One way in my mind is to enable usb debugging just by using an otg keyboard. But this requires help from some one really kind.; to upload a video showing how to open settings and enable debugging only using a keyboard connected via OTG cable ( My phone is running on MiUi 10). I know it's too much to ask..but.. still..
Thank You
okay so, i just got this phone. did all updates, enabled bootloader unlocking and made my mi account, downloaded the mi unlock tool and everything.
heres where the problem comes in.
everytime i try the button combination to get into fastboot, it works. but then when i connect my phone to my computer, the fastboot splash screen turns black with little text at the top saying "press any button to shutdown" or something like that. it just wont stay on the fastboot screen, its like its exiting fastboot mode on its own.
why does it do this, and what can i do to fix it?
note: i have downloaded all drivers and software to get this to work, and nothing seems to be coming to light.
please help me, i am very confused.
update: actually, it seems to be fine before i open the mi unlock tool. it seems that when mi unlock tool is not open, it stays in fastboot mode, but as soon as i open mi unlock tool, it just kicks me out of fastboot mode, and goes to a black screen with something at the top saying the exact same thing i mentioned earlier.
Turn on the phone go into developer settings and enable usb debugging, im pretty sure that's it
Deexterity said:
Turn on the phone go into developer settings and enable usb debugging, im pretty sure that's it
Click to expand...
Click to collapse
i already have enabled usb debugging. but for some reason, it won't just stay in fastboot mode.
was thinking about calling xiaomi and seeing what they have to say. because i cant find anything on this matter, so its probably just something im doing wrong. though it may be my version of windows. i have Windows 8.1. so maybe thats the deal?
this is stressful lol
If I'm not mistaken, you should only connect the phone in fastboot mode when the program asks, not before you open it
Deexterity said:
If I'm not mistaken, you should only connect the phone in fastboot mode when the program asks, not before you open it
Click to expand...
Click to collapse
i know, i did that too. but the problem still persists... ill try some other time.
thanks for helping though
First off this is much better place to ask questions. When phone is running and you connect to pc can you access storage?
If not check drivers, try different usb cable, and try different usb ports.
If yes then can you access the phone via adb?
If not it is a pc issue probably drivers.
If so leave phone booted and connected then open unlock software. Once software is up and running go to terminal/command prompt and type "adb reboot bootloader" without quotes.
I don't think it is windows version but with Microsoft anything is possible. I still use windows 7 for all this stuff.
Had the same problem on my Desktop with Ryzen, i tried it on my laptop with Intel Celeron and it worked from the first try without any drivers installed. If you have AMD that might be the cause
Hello.
My personal experience says:
1 Install Drivers on the PC/Laptop.
2 Activate DEVELOPER OPTIONS
3 Accept O E M Unlock
4 Allow usb debugging
5 Shut down Wi-Fi and use only DATA in order to connect - verify the device to the Mi account you have. When connected, press "understood" or ""accept"" (however it pops up).
6 Connect the phone to the PC/Laptop
7 After being connected, shut down the phone and put it in FASTBOOT. Make sure your PC ""reads"" your phone. Do it through command line/power shell, and make sure it shows up as alphanumeric in command line (i hope you know what to type - e.g fastboot devices)
8 Download and use the mi unlock tool (preferable Versions 2.....). Connect through this tool to your Mi account
9 Ask for permission to unlock // unlock your phone if days-hrs have passed. Ignore any pop-up message/warning and go on.
VERY IMPORTANT NOTES:
A. The phone must be recognized from the PC as ADB INTERFACE (in device manager) both in normal and Fastboot modes. Any other case is waste of time.......
B. Use a good cable and have the mobile charged!
C. In case you have another (older) device connected to your account, disconnect-delete it or else you will end up stuck with a ""cannot unlock message""
D. The process will not work if your PC runs some Win 10 versions as well as if built with RHYZEN PROCESSOR. Prefer PCs running win 7 or 8.
E. You must have DATA connection available or else you will not be able to connect-verify the phone to/through your Mi account !!! it is a new (dual function) fail - safe procedure from xiaomi!!!
F. Make sure you have the correct drivers installed to avoid a brick - bootloop etc
Hope it helps!
Gathered from my own experience!
To summarize: The xiaomi imposes too much rodeo and much time spent of the user to just "try" to unlock a simple bootloader, better to change of apparatus and to be happy with the practicality. lol