Each flashing rom always eror in "receiving hello packing"
Iam locked bootloader!!
In miui 8.0.50 global stable want to move to rom chinese dev for unlocking bootloader!!
Driver signature off
Win 7 64bit
Is there solution?
Sorry my bad english
Download fastboot edl in computer ,extract it..go to fastboot mode in phone and connect to PC ..now select edl from extracted folder ..now your phone Completely get turned off and led will be blinking ..now flash whichever ROM u want in flash tool
Same problem bro!! Receiving hello packet error
Related
Hi xiaomi users
if you bricked your mi5 after wrong flash or something went wrong and you not able any more to start you device normaly, so you'r in the correcte thread to unbrick your mi5 with the correcte fastboot rom and miflash beta
whatever the cause of bricking your device( in my case no boot, no recovery mode and no fastboot mode just black screen),if it connected to your laptop and show qualcomm QHsusb QDloader 9008 in devices manager then you have big opportunity to make it alive again :fingers-crossed:
1 :
download and install xiaomi flashing tool miflash beta frome here : http://en.miui.com/forum.php?mod=at...jYmIxNDZifDE0NjYzMTc1OTZ8MzEyNzU5MnwyODE5Nzk=
2 : download the correct fastboot rom for your xiaomi mi5 from here : http://update.miui.com/updates/v1/fullromdownload.php?d=gemini&b=X&r=cn&n=
note: i have chosen the latest china dev fastboot rom to unbrick my mi5,other fastboot roms not worked for me
put your fastboot rom to c/ drive and extract it ,not on desktop or other extension
3 : enter on fastboot mode by pressing power and volume down you will see logo of xiaomi its fastboot mode,if you cant access fastboot mode just connect you mi5 to your laptop it will detect it as qualcomm driver
4 : open miflash beta and check flash all,chose you rom in c drive then clik refresh button you will se your device as com port,now start flash by cliking on flash button and be patient it will take over 5 min, when success unplug your and start your phone,if not start just let it connected to your laptop over 30 min it will start automatically
now enjoy your mi5 with latest miui8 china developer,
hit thanks buton if im help you :good:
Hi guys, i was trying to flash a global stable rom with edl and miflash but something went wrong and miflash says that memory was unsifficient. What should i do? I'm on windows 10 64bit with all adb installed (i think). I even disabled the driver license. I didn't do nothing since the error and i don't know if i should unplug the cable or whatever.
hey, it says flash done (sucessful), but my phone still with black screen and nothing happens, should i just wait?
Hi guys, im not sure if this will help you or not but my phone bricked last night and ive manage make it work again by following this method but it little bit different so when it my phone successfully flashed, i just left it untill the batteries is empty by left it all night (before bricked the batteries was 50% i think), maybe it will take longer then mine and if this method work it showing battery empty indicator like normal phone.. ps: when my phone bricked i had no fastboot no recovery no edl, just black screen and red light indicator.. good luck guys
i have used the test point method and successfully flashed the latest Rom V8.5.2.0 with the latest MiFlash 201612220. after flash done, the phone still cannot turn on... anybody can help???
iam trying to unlock the bootloader of redmi note from this guide
https://www.youtube.com/watch?v=gIjVScTm4Es
in middle of flashing fastboot mode from edl mode accidently removed usb cable and again tried to reflash same procedure but showing error...
then tried to flash stock rom from fasttboot and showing error ....
ss attached please help what to do
agriculture said:
iam trying to unlock the bootloader of redmi note from this guide
https://www.youtube.com/watch?v=gIjVScTm4Es
in middle of flashing fastboot mode from edl mode accidently removed usb cable and again tried to reflash same procedure but showing error...
then tried to flash stock rom from fasttboot and showing error ....
ss attached please help what to do
Click to expand...
Click to collapse
You will have to force restart your phone into fastboot then again into edl then (first close mi flash ) then open and connect kenzo make sure your miui fast boot ROMs directory should before images folder
Refer screens
[email protected] said:
You will have to force restart your phone into fastboot then again into edl then (first close mi flash ) then open and connect kenzo make sure your miui fast boot ROMs directory should before images folder
Refer screens
Click to expand...
Click to collapse
solved thanks
first hi guys ... and thank you in advance for help
Im newbie here and newbie too for installing ROMs ... i have a little big problem and i wish u help me ...
When i start my phone , it stuck on bootanimation .
And i can access to recovery mode ( twrp 3.0.0 ) normally ... and i want one of thoose options guys :
1/ get back my old sys .
2/ or get 8.1 android rom ( i prefered this one if its not too late ) .
Im new sooo plz help
More details :
* the problem start when i turned my phone off and i connected it to the pc and entered this command ( fastboot flash boot recovery.img) (the recovery is twrp 3.0.0 ) .
*i didn't wipe my data yet and i have a backup . ( 4 GB buckup for my current rom on scard ).
*and when i try this command ( fastboot flash recovery twrp.img) it says : failed <remote: command not allowed >
*and when i treied another command ( fastboot flash boot boot.img) and turning my phone on , it stuck on the bootanimation lol
- plz guys if there is any idea plz help
guys another question plz ..
why when enter this command ( fastboot flash recovery twrp.img) show me FAILED ( REMOTE : < COMMAND NOT ALLOWED >)
but when i enter this command ( fastboot flash boot twrp.img ) show me OKEY ..
??
lol another problem ... after i wiped the full system .. i start to flash the ROM ... its FAILED !!!!
gapps FAILED too
fix FAILED ... help me plz
thx in advance
.... ok restored my old rom backup but it stuck in bootanimation ...
any idea plz !!!
the thread is here of the custom rom is here :
https://forum.xda-developers.com/xperia-z1/general/rom-aicp-13-1-oreo-8-1-honami-t3768084/page13
Dr Nye said:
first hi guys ... and thank you in advance for help
Im newbie here and newbie too for installing ROMs ... i have a little big problem and i wish u help me ...
When i start my phone , it stuck on bootanimation .
Click to expand...
Click to collapse
You have to download the stock Android firmware for your Xperia Z5 on your computer – you can get it from Sony’s official website, or from any other source you prefer (for example: xda.developers.com).
Also, on your computer you have to download the Flash tool – you can get it from http://www.flashtool.net/index.php
Unzip and install the flashing tool.
Put your smartphone in fastboot mode and connect it with your computer.
Use the Flash tool and follow on screen prompts in order to reinstall the stock Android system on your Xperia Z5.
x.ak**** said:
You have to download the stock Android firmware for your Xperia Z5 on your computer – you can get it from Sony’s official website, or from any other source you prefer (for example: xda.developers.com).
Also, on your computer you have to download the Flash tool – you can get it from http://www.flashtool.net/index.php
Unzip and install the flashing tool.
Put your smartphone in fastboot mode and connect it with your computer.
Use the Flash tool and follow on screen prompts in order to reinstall the stock Android system on your Xperia Z5.
Click to expand...
Click to collapse
ty ... my phone xperia z
Hi . after browsing in different threads i couldn"t find something to work .
after flashing different custom roms , i rebooted and ended up with no recovery , no os, only fastboot with bootloader unlocked but frp locked wich gives me no possibility to flash anything trough fastboot . i get an error mode with func NO:11(recovery image) error NO:2 (load failed ). and i can"t enter dload mode to try the 3-buttons update because i can"t completly turn off the phone . any suggestion ?
THANKS IN ADVANCE
Next time don't flash different custom roms.
Remember.....
Sp flash tool work (without authorization) with v11.0.4.0-v11.0.8.0......but v11.0.4.0 is best for sp flash tool work without authorized account...
This Post is very important for all redmi 9 users, who Want to modify his or her device At Home Without Going To xaiomi customer center and Pay somebody to fix His Or Her device.
Theory:
Our redmi 9 is MediaTek bAse Device. That's Mean it is easily to break without any reason. When Break your device you cannot go fastboot mode or recovery mood.Only boot logo is coming and then it reboot every time. Then The only option is left that is you can or must be flash it with SP flash tool. The SP flash tool flash device with Brom Mood.It is same as Snapdragon EDL mode. Unlik Snapdragon You do not need to disassemble your device to go Brom Mood.The Mood is always there when you reboot your device.If you connect your device With If your PC have Vcom port driver(can be download from this post) Then the computer Can recognise Your device As Vcom Port.But you cannot use this port to flash device Xiaomi Is lock the port. But good News is global V11.0.4.0 has some bug.You can use SP flash tool to flash. An upper Version it may possible But doesn't Know When they fix This Bug And SP flash tool is unable to flash lT.So you have to stay on V11.0.4.0. if You Are in higher version When You Read The Post Do Not Worry You Can Downgrade V11.0.4.0 . test All Framware At This Time of Writting The Post ,That The AntirollBack Protection Is Not Active.That's Mean You Can Downgrade Your Framwar.
How To Unbrick Your Device?:
If You Are In V11.0.4.0 then It Work Definitely Unless You Flash Wrong Preloader.Bin Or Earse Preloader.bin .intall Vcom Driver To Your Pc(DownloaD From Post).If Your Device Can Defect As Vcom Driver Then You Good TO Go....
Follow The Below Link To Flash With Sp Flash Tool.Remember Do Not Flaah Preloader.Bin File....
Redmi 9 brick problem solution.
1.if you are above v11.0.8.0 then go and follow below link... https://forum.xda-developers.com/t/disable-authorization-and-unbrick-your-redmi-9.4228213/ ================================== 2.Else follow it...
forum.xda-developers.com
How To UpdaTe Your Device Without UpdaTe The Framware?:
It is very good and important question. Because If you update your Device With Recovy Method With Recovery Rom Then Your Framware Is Also Update.So It Is Not Possible To Use Sp Flash Tool Then.To Avoid This Problen You Can Follow Two Method Which I Describe Below.....
1.Fastboot Rom Method(Easy):
You Have to download the fastboot version Of your ROM which You Want To Install.Then extract The Fastboot Rom And You Need super.img and boot.img File.You Also Need A vbmeta.Img(Download From This Post). Then Go to fastboot mode Of your device and Flash Via Below Cmd
fastboot flash super super.img
fastboot flash boot boot.img
fastboot flash vbmeta vbmeta.img
Erase your all user data from Going To Recovery Mood(power+Volume Down).Reboot Your Device If Get Bootloop Then Flash Magisk Patch Boot.Img From The Fastboot Rom.If you Do Not Know How To Patch Then Follow The Below Link..
Root Redmi 9 without twrp and data lost
VERY IMPORTANT: Please make sure your boot.img version matches the ROM version . that's mean if you update your device then you have to use patch boot.img from new recovery rom.never use the old one. If they mismatch you might brick your phone...
forum.xda-developers.com
In This Way You Can Flash Any Variant of FastbOot Rom.That's Mean You Can Use Chaina Rom With GlobAl Framware..
2.RecOvery Method(Hard)
Requirements:
*Recovery Rom(any Version And Any Variant)
*Pc Or Laptop With Windows And Linux(Ubuntu 20.4 is Batter)
*Some Knowledge About Ubuntu Cmd.
Linux part
Extract 4 file From The Downloaded Recovery Rom
1.system.new.dat.br
2.system.transfer.list
3.product.new.dat.br
4.product.transfer.list
And Download sdat2img.py(from This Post extract from dat2img-master.zip)
Keep This 5 file In Same Folder And Ooen A Terminal From The Same Location.run The Below Cmb In Linux Environment One By One.
brotli -d system.new.dat.br
brotli -d product.new.dat.br
./sdat2img.py system.transfer.list system.new.dat system.img
./sdat2img.py product.transfer.list product.new.dat product.img
After Run All 4 cmd Successful Then You Can Find Two File In Same Folder Which Are system.img And .product.img
Linux Part Is End Now Go To Window Os...
now Go To Your Device fastboot MooD And Connect Your Device With Pc And Run Below Cmd
fastboot reboot fastboot (For Going To Fastbootd Mood)
When You Go To Fastbootd Mood Then Open Cmd From Where Your CreateEd File Is And Run Below Cmd
fastboot flash system system.img
fastboot flash product product.Img
fastboot -w
fastboot reboot
Do Not Forget To Flash vbmeta(From This Post).flash vbmeta With fastboot Mood And When You Flash system and Product Then You Must Get A Error Like"Invalid spare At Header Magic" do Not Panic It Is Simple....
Extra:
if You Want To Use vendor.img Then you Can Also Extract vendor.img With The Above Method.and Can Flash It Via fastbootd Moid.If You Flash Vendor.img Then Do Not Forget Fo Flash boot.img From The Recovery Rom.flash boot.img with fastboot mood
If this post helpful them do not forget to thank me.Need lots time to make this post.if any questions then feel free to ask..
i had tested Recovery(Corrupted), after Reboot, i cant able to fastboot mode and Recovery mode
then i Flashed Via SP Flash Tool (With Preloader)
(((((i dont know about Preloader before Flash)))))
now device is dead, sp Flash tool not detects it error with code : Error status brom cmd fail (0xc0060005)
(Before this thread we have flashed still now there is no solution)
((3 Pleople are flashed, including me))
my device at service centre, They told that need to change motherboard,
not only me those 2 people also get same answer from service centre {need to change motherboard}
Preloader File can able to kill motherboard????
Any Solution to already Flashed Preloader devices (Redmi 9 Lancelot ) ????????
Mantipallykrishna said:
i had tested Recovery(Corrupted), after Reboot, i cant able to fastboot mode and Recovery mode
then i Flashed Via SP Flash Tool (With Preloader)
(((((i dont know about Preloader before Flash)))))
now device is dead, sp Flash tool not detects it error with code : Error status brom cmd fail (0xc0060005)
(Before this thread we have flashed still now there is no solution)
((3 Pleople are flashed, including me))
my device at service centre, They told that need to change motherboard,
not only me those 2 people also get same answer from service centre {need to change motherboard}
Preloader File can able to kill motherboard????
Any Solution to already Flashed Preloader devices (Redmi 9 Lancelot ) ????????
Click to expand...
Click to collapse
No need to replace motherboard....go xaiomi service shop and tell them what you done with your device and ask them if they hava authorization account...if they have them tell them to use it to fix your device...
there's no way to bring it back to life except using authorized mi account for flashing. in this state phone doesn't show preloader drivers when its connected to PC or laptop, it shows mtk port instead preloader
Haidershah907 said:
there's no way to bring it back to life except using authorized mi account for flashing. in this state phone doesn't show preloader drivers when its connected to PC or laptop, it shows mtk port instead preloader
Click to expand...
Click to collapse
Sp flash tool work (without authorization) with v11.0.4.0-v11.0.8.0......but v11.0.4.0 is best for sp flash tool work without authorized account...
please help me , Please help me, bootloader unlock for redmi 9 using other way not seem by using sim data ,because this way not work in country of Yemen , because sim data is very slow i will not registrate account Xiaomi and no service center in Yemen.
help my please.
other way to redmi 9 fastboot rom flash without unlock bootloader
send your solve to my gmail : [email protected]
neshwanalamery said:
please help me , Please help me, bootloader unlock for redmi 9 using other way not seem by using sim data ,because this way not work in country of Yemen , because sim data is very slow i will not registrate account Xiaomi and no service center in Yemen.
help my please.
other way to redmi 9 fastboot rom flash without unlock bootloader
send your solve to my gmail : [email protected]
Click to expand...
Click to collapse
Need registration is only way...use other sim card