first hi guys ... and thank you in advance for help
Im newbie here and newbie too for installing ROMs ... i have a little big problem and i wish u help me ...
When i start my phone , it stuck on bootanimation .
And i can access to recovery mode ( twrp 3.0.0 ) normally ... and i want one of thoose options guys :
1/ get back my old sys .
2/ or get 8.1 android rom ( i prefered this one if its not too late ) .
Im new sooo plz help
More details :
* the problem start when i turned my phone off and i connected it to the pc and entered this command ( fastboot flash boot recovery.img) (the recovery is twrp 3.0.0 ) .
*i didn't wipe my data yet and i have a backup . ( 4 GB buckup for my current rom on scard ).
*and when i try this command ( fastboot flash recovery twrp.img) it says : failed <remote: command not allowed >
*and when i treied another command ( fastboot flash boot boot.img) and turning my phone on , it stuck on the bootanimation lol
- plz guys if there is any idea plz help
guys another question plz ..
why when enter this command ( fastboot flash recovery twrp.img) show me FAILED ( REMOTE : < COMMAND NOT ALLOWED >)
but when i enter this command ( fastboot flash boot twrp.img ) show me OKEY ..
??
lol another problem ... after i wiped the full system .. i start to flash the ROM ... its FAILED !!!!
gapps FAILED too
fix FAILED ... help me plz
thx in advance
.... ok restored my old rom backup but it stuck in bootanimation ...
any idea plz !!!
the thread is here of the custom rom is here :
https://forum.xda-developers.com/xperia-z1/general/rom-aicp-13-1-oreo-8-1-honami-t3768084/page13
Dr Nye said:
first hi guys ... and thank you in advance for help
Im newbie here and newbie too for installing ROMs ... i have a little big problem and i wish u help me ...
When i start my phone , it stuck on bootanimation .
Click to expand...
Click to collapse
You have to download the stock Android firmware for your Xperia Z5 on your computer – you can get it from Sony’s official website, or from any other source you prefer (for example: xda.developers.com).
Also, on your computer you have to download the Flash tool – you can get it from http://www.flashtool.net/index.php
Unzip and install the flashing tool.
Put your smartphone in fastboot mode and connect it with your computer.
Use the Flash tool and follow on screen prompts in order to reinstall the stock Android system on your Xperia Z5.
x.ak**** said:
You have to download the stock Android firmware for your Xperia Z5 on your computer – you can get it from Sony’s official website, or from any other source you prefer (for example: xda.developers.com).
Also, on your computer you have to download the Flash tool – you can get it from http://www.flashtool.net/index.php
Unzip and install the flashing tool.
Put your smartphone in fastboot mode and connect it with your computer.
Use the Flash tool and follow on screen prompts in order to reinstall the stock Android system on your Xperia Z5.
Click to expand...
Click to collapse
ty ... my phone xperia z
Related
Hello Spreadtrum Masters,
My Phone ; MICROMAX BOLT A27
CHIPSET ; SPreadtrum SC6820a
Os : android 2.3.5
Sw ; ZE25PAA_060A_V8_O7
Hw ; V2.0
kernal version ; 2.6.35.7
succesfully root it by unlock root
and install Cwm recovey
all steps are working fine
also i can acces fastboot mode in phone
i did a mistake
in cwm >>> mount storage >> i formatted
/ fixnv, / backupfixnv , / runtimenv, /productinfo
aftrr fon switch on
it stucks @ boot logo ( showing bolt)
i try to flash stoke rom
by Research download.
all drivers are installed properly
after Fdl2 >> reading flash >> operation failed
again i try to Flash by Uncheck 'NV' nvitem.bin
wow... succussefully Passed
after phone switch on its stuck at bootlogo...
again i Flash stoke rom check NV But UNCHECK in CALIBRATION TAB......
SUCCESFULLY FLASHED
FONE SWITCH ON ....BOOT NORMALLY..
but long time to catch operators signal
also imei no is changed in settings>> about phone
not like sticker imei in phone batterry back
pls help meeeee
Not here with a help but here to ask you for the help!!!
hi
not here with a help but here to ask you for the help!!! :silly:
i have bricked my Samsung Galaxy Star Pro GT-S7262 when i was trying to root it but it still goes in Download Mode
i tried to flash stock rom with odin but phone wont boot up..... as my phone is Spreadtrum SC6820 thought to ask you for the help... is there any thing you can do for me
wahab96 said:
hi
not here with a help but here to ask you for the help!!! :silly:
i have bricked my Samsung Galaxy Star Pro GT-S7262 when i was trying to root it but it still goes in Download Mode
i tried to flash stock rom with odin but phone wont boot up..... as my phone is Spreadtrum SC6820 thought to ask you for the help... is there any thing you can do for me
Click to expand...
Click to collapse
bro,
do u hav stoke rom? ????
if ur stoke rom. in .pac file u can flash ur phone by research dwnload.....
if flashing fail at fd2, ,, uncheck all boxes in calibration tab.....
flash it
wahab96 said:
hi
not here with a help but here to ask you for the help!!! :silly:
i have bricked my Samsung Galaxy Star Pro GT-S7262 when i was trying to root it but it still goes in Download Mode
i tried to flash stock rom with odin but phone wont boot up..... as my phone is Spreadtrum SC6820 thought to ask you for the help... is there any thing you can do for me
Click to expand...
Click to collapse
do u succesfully install driver in ur pc? ??
also battery charge abv 80% ??
Thanks for the respones bro!
mobinmk007 said:
bro,
do u hav stoke rom? ????
if ur stoke rom. in .pac file u can flash ur phone by research dwnload.....
if flashing fail at fd2, ,, uncheck all boxes in calibration tab.....
flash it
Click to expand...
Click to collapse
i have stock rom but in .tar.md5 file!
if you can help me to convert that in .pac file please
---------- Post added at 07:54 PM ---------- Previous post was at 07:36 PM ----------
mobinmk007 said:
Hello Spreadtrum Masters,
My Phone ; MICROMAX BOLT A27
CHIPSET ; SPreadtrum SC6820a
Os : android 2.3.5
Sw ; ZE25PAA_060A_V8_O7
Hw ; V2.0
kernal version ; 2.6.35.7
succesfully root it by unlock root
and install Cwm recovey
all steps are working fine
also i can acces fastboot mode in phone
i did a mistake
in cwm >>> mount storage >> i formatted
/ fixnv, / backupfixnv , / runtimenv, /productinfo
aftrr fon switch on
it stucks @ boot logo ( showing bolt)
i try to flash stoke rom
by Research download.
all drivers are installed properly
after Fdl2 >> reading flash >> operation failed
again i try to Flash by Uncheck 'NV' nvitem.bin
wow... succussefully Passed
after phone switch on its stuck at bootlogo...
again i Flash stoke rom check NV But UNCHECK in CALIBRATION TAB......
SUCCESFULLY FLASHED
FONE SWITCH ON ....BOOT NORMALLY..
but long time to catch operators signal
also imei no is changed in settings>> about phone
not like sticker imei in phone batterry back
pls help meeeee
Click to expand...
Click to collapse
Read this post, I hope this can help you!
http://forum.xda-developers.com/showthread.php?t=2018023&page=13
wahab96 said:
hi
not here with a help but here to ask you for the help!!! :silly:
i have bricked my Samsung Galaxy Star Pro GT-S7262 when i was trying to root it but it still goes in Download Mode
i tried to flash stock rom with odin but phone wont boot up..... as my phone is Spreadtrum SC6820 thought to ask you for the help... is there any thing you can do for me
Click to expand...
Click to collapse
bro
if u hav tar.md5 file u can easily flash by odin
can u tell which method is use to root ur phone? ??
reason for brick? ??
pls tell the steps ??? cauce of brick....
bro ,,,, pls tell the stepsss which cauce brick
wahab96 said:
hi
not here with a help but here to ask you for the help!!! :silly:
i have bricked my Samsung Galaxy Star Pro GT-S7262 when i was trying to root it but it still goes in Download Mode
i tried to flash stock rom with odin but phone wont boot up..... as my phone is Spreadtrum SC6820 thought to ask you for the help... is there any thing you can do for me
Click to expand...
Click to collapse
bro
if u hav tar.md5 file u can easily flash by odin
can u tell which method is use to root ur phone? ??
reason for brick? ??
pls tell the steps ??? cauce of brick....
Some one on the XDA guided me WRONG!!!
mobinmk007 said:
bro
if u have tar.md5 file u can easily flash by odin
can u tell which method is use to root ur phone? ??
reason for brick? ??
pls tell the steps ??? cause of brick....
Click to expand...
Click to collapse
There is a thread on XDA, [Q] Rooting Samsung Galaxy Star Pro Duos (GT-S7262) http://forum.xda-developers.com/showthread.php?p=47323217#post47323217
here someone shared some kind of boot.img and said to flash it with odin or ResearchDownload! to get my device rooted! So i replaced real (STOCK) boot.img with that boot.img in tar.md5 FILE and i flashed it with odin! and it went bricked
after that tried to flash stock ROM with odin but it,s not get my device back to life it Stuck on boot and start vibrating constantly
Please read that THREAD to know in detail that how i bricked my device:angel:
the soft brick is due to erase of boot.img from phone partiton
wahab96 said:
There is a thread on XDA, [Q] Rooting Samsung Galaxy Star Pro Duos (GT-S7262) http://forum.xda-developers.com/showthread.php?p=47323217#post47323217
here someone shared some kind of boot.img and said to flash it with odin or ResearchDownload! to get my device rooted! So i replaced real (STOCK) boot.img with that boot.img in tar.md5 FILE and i flashed it with odin! and it went bricked
after that tried to flash stock ROM with odin but it,s not get my device back to life it Stuck on boot and start vibrating constantly
Please read that THREAD to know in detail that how i bricked my device:angel:
Click to expand...
Click to collapse
bro ,
did u suceesfully flash rooted boot.img by odin? ???
in my view, ,, u didnt flash completely......by odin
jus erase ur boot.img in ur phone partiton......
is ur usb cable is good? ?
disable ur driver digital signature, if ur driver is not digitally signature......
wen u connect ur phone to pc.. is ur pc detect ur fone? ? beep sound in pc? ??
check the above conditons...
den try it by odin
second steps....fastboot mod / download mode
do u hav orginal boot. img in img format, ???
otherwise extract from mtd.5
den setup fastboot adb folder
install adb drivers
copy boot.img to the folder
open cmd prmpt by shift + right click>> open command prompt here...
then put ur fone in fastbootmode & connect to pc
type command
fastboot devices
if ur phone is detected it will show ur phone s seial no
then
jus flash it by
fast boot command
fastboot flash boot boot.img
so first try fastboot mode
then only try with spreadtrum research tool
in order to flash it by resarch tool
u want 3 file
fdl1. bin
fdl2. bin
& boot.img
no need of converting to pac file
also u dont want to flash to stoke rom
try it.... gud luck
pls verify .......is ur phone is detected in ur pc
by my computer >> device mannager
i attached a pic.
den u try to flaah
Thank you So Much!!! for the help!
mobinmk007 said:
bro ,
did u suceesfully flash rooted boot.img by odin? ???
in my view, ,, u didnt flash completely......by odin
jus erase ur boot.img in ur phone partiton......
is ur usb cable is good? ?
disable ur driver digital signature, if ur driver is not digitally signature......
wen u connect ur phone to pc.. is ur pc detect ur fone? ? beep sound in pc? ??
check the above conditons...
den try it by odin
second steps....fastboot mod / download mode
do u hav orginal boot. img in img format, ???
otherwise extract from mtd.5
den setup fastboot adb folder
install adb drivers
copy boot.img to the folder
open cmd prmpt by shift + right click>> open command prompt here...
then put ur fone in fastbootmode & connect to pc
type command
fastboot devices
if ur phone is detected it will show ur phone s seial no
then
jus flash it by
fast boot command
fastboot flash boot boot.img
so first try fastboot mode
then only try with spreadtrum research tool
in order to flash it by resarch tool
u want 3 file
fdl1. bin
fdl2. bin
& boot.img
no need of converting to pac file
also u dont want to flash to stoke rom
try it.... gud luck
Click to expand...
Click to collapse
Thank you So Much!!! for the help! I believe that this will help me... :angel:
I don't have my bricked phone these days... for some reasons as soon i get my phone back i will try that & will report!
THANKS AGAIN.... Your Tip Worth a Lot to me
My micromax stuck on logo
my micromax a27 is stuck on logo BOLT .
i have bricked my micromax bolt a27,
i have flash recovery using fastboot in place of original boot image and tried to install dreambolt without rooting
now my mobile is stuck on that logo,
Now i am trying to flash stock system using fastboot but don't getting success.
please help me ......
please tell me which tool u used to flash micromax A27 . i have tried (UPGRADEDOWNLOAD_R2.9.7003) from this tool but it cannot detect my device stuck on window "waiting......."
abut phone- my phone is continuous vibrating when it attached to usb or charger.
Micromax A27 Bootloop issue
mobinmk007 said:
Hello Spreadtrum Masters,
My Phone ; MICROMAX BOLT A27
CHIPSET ; SPreadtrum SC6820a
Os : android 2.3.5
Sw ; ZE25PAA_060A_V8_O7
Hw ; V2.0
kernal version ; 2.6.35.7
succesfully root it by unlock root
and install Cwm recovey
all steps are working fine
also i can acces fastboot mode in phone
i did a mistake
in cwm >>> mount storage >> i formatted
/ fixnv, / backupfixnv , / runtimenv, /productinfo
aftrr fon switch on
it stucks @ boot logo ( showing bolt)
i try to flash stoke rom
by Research download.
all drivers are installed properly
after Fdl2 >> reading flash >> operation failed
again i try to Flash by Uncheck 'NV' nvitem.bin
wow... succussefully Passed
after phone switch on its stuck at bootlogo...
again i Flash stoke rom check NV But UNCHECK in CALIBRATION TAB......
SUCCESFULLY FLASHED
FONE SWITCH ON ....BOOT NORMALLY..
but long time to catch operators signal
also imei no is changed in settings>> about phone
not like sticker imei in phone batterry back
pls help meeeee
Click to expand...
Click to collapse
i soft brick my micromax A27 ,
it goes into bootloop
i had installed cwm and dreambolt custom tom successfully
but when i tried to get back to the original rom i delted delvick and cache and restarted it.
that my mistake cost me my phone is in bootloop it goes to the home screen then restart again.
i only have access to fastboot mode. I cant go into recovery mode tried many tricks like previous but its not working.
Was this resolved?
Im into similar situation and cant find the way around.
Please help.
guys pls help,am a newbie don't know much about all these stuffs my phone is ....
xperia ray,rooted,bootloader unlocked without loosing DRM data ,currently on zellycream rom .ics
when am installing beanstalk rom in cwm recovery it show error like cannot install this zip file.and now stuck at sony logo cannot enter into cwm recovery .
before installing i tried to flash boot.img using flashtool it shows error (cannot do this in fastboot mode)so i tried some stupid method using cwm and later:crying::crying::crying:
realize its only for qualcom running device.
i cannot flash stock kernal in flash mode back button showing no response.
any body pls help :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed: :crying::crying::crying:
ramkumarkr666 said:
guys pls help,am a newbie don't know much about all these stuffs my phone is ....
xperia ray,rooted,bootloader unlocked without loosing DRM data ,currently on zellycream rom .ics
when am installing beanstalk rom in cwm recovery it show error like cannot install this zip file.and now stuck at sony logo cannot enter into cwm recovery .
before installing i tried to flash boot.img using flashtool it shows error (cannot do this in fastboot mode)so i tried some stupid method using cwm and later:crying::crying::crying:
realize its only for qualcom running device.
i cannot flash stock kernal in flash mode back button showing no response.
any body pls help :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed: :crying::crying::crying:
Click to expand...
Click to collapse
flash kernel usiing fastboot (not flashmode)
download this, then extract. (u need to have Android sdk installed, if not search google & install) http://www33.zippyshare.com/v/22861267/file.html
1. pur kernel into the fastboot folder
2. power off device. press & HOLD vol up button when u cannect to pc. the blue led should lit. leave phone
3. go back to fastboot folder click in empty space, then hold 'shift' & press right mouse button --> ''open console here''
4 now u should have a black box (cmd)
5 type ''fastboot flash boot boot.img'' (without quotes, & remeber the red text is the name of the kernel may u have to rename it)
6. fast boot should tell u all done, ok.
7. boot in CWM
ramkumarkr666 said:
guys pls help,am a newbie don't know much about all these stuffs my phone is ....
xperia ray,rooted,bootloader unlocked without loosing DRM data ,currently on zellycream rom .ics
when am installing beanstalk rom in cwm recovery it show error like cannot install this zip file.and now stuck at sony logo cannot enter into cwm recovery .
before installing i tried to flash boot.img using flashtool it shows error (cannot do this in fastboot mode)so i tried some stupid method using cwm and later:crying::crying::crying:
realize its only for qualcom running device.
i cannot flash stock kernal in flash mode back button showing no response.
any body pls help :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed: :crying::crying::crying:
Click to expand...
Click to collapse
download flash tool and install it ...
switch off phone
connect the usb to pc and phone by holding volume up key NOW blue led light up...u can see flash tool notify that device connected in fastboot mode..
Now press the lighting key select fastboot ...then select kernel to flash...
DONE...
Note: phone driver must be installed
well, i was clean installing Xperia STE CM 11 pepper ROM. I was already using the same earlier , but wanted to do a fresh install
Anyways, i entered TWRP, and Advanced WIPE everything , including sd-card, Android Secure , data, system , cache & alll .
well , then i thought after rebooting i would just flash the ROM. ZIP as usual, but my phone is now stuch at SONY logo, and i am unable to enter TWRP.
So i tried to fastboot boot.img , and it was successful , but still when i try to flash directly the ROM.zip , using
fastboot flash zip <rom.zip>
it sends , but then returns with an error
FAILURE <remote : Partition not found>
then i tried to use this recovery http://forum.xda-developers.com/xperia-u/sola-development/recovery-twrp-2-7-0-0-touch-recovery-t2683495
this returns me with error " daemon not running, starting it now on port 5037"
I also cant use ADB properly , my device isn't listed when i command adb devices
error : device not found.
( however lter on while doing the same via Flashtool , it does clarifies the reason that USB Debugging is turned off..so maybe that's why ADB is not working)
My laptop has win 7 , i double checked that i have all the necessary ADB and device specific usb drivers, and Under DEVICE MAnager Tab ,
so please tell me how to solve this...Android ADB Composote device is listed working properly.
So after that , i flashed this Kernel via fastboot Out Of desparation http://forum.xda-developers.com/xperia-u/sola-development/kernel-t2075093 [Sola] [CWM Touch] [6.1.1.B.1.54] [Unlocked Bootloader
and it worked , i mean i was able to enter CWM and navigate properly there, but i dont want to run stock firmware ICS again.
(also there i Explored my Internal SD Card , and it's completely empty)
So then i again flashed the boot.img from http://forum.xda-developers.com/xperia-u/sola-development/rom-cyanogenmod-11-t2743059 [ROM] [UB] [XperiaSTE] CyanogenMod 11
And well , the result is yet the same, my phone boots up and stays at SONY Logo, no LEDs flashing changing colors as it did earlier, and i cant enter TWRP , Neither can't i flash cm.11.0-12-pepper.zip via fastboot, it returns with error regarding messed up partitions.
also , i tried to explore/open Decompile the provided "boot.img" with PowerISo , ImgBurn , etc. and each says that the file is either damaged or corrupted.
MAYBE , that's the reason why me & many others aren't able to boot into recovery, there is something wrong with the boot.img of this rom , however i will try flashing Other ROM's Boot.img tomorrow.
I urge the developers to please look into that as you are our only saviors.
So my Questions now are
1. what should i do get a working CM 11 kk ROM for my device ?
2. Is my device Bricked ( because i am doubtful on that one, as i can connect it in fastboot as well as flashmode) ?
3. How to Create/repair the partitions , that CMD says are euther damaged or not found ?
4.Will flashing my stock firmware 6.1....54 , via FLashtool , solve all this & by solving i mean getting CM11 to work again . ?
PLease someone do reply , as i live in a remote town and i am all on my own completely. ThankS.
Try to use Xperia Sola AOSX ROM boot.img, then install cm11.
Try new version
Kindly iam asking for xda help
I hav Archos 50c Platinum
Android ver lollipop 5.1
Builde number ( [email protected] )
It comes with chines menu in recovery mode ... i tried to install English cwm recovery img by flash tool named (flashify) ... the phon made restart to get into recovry mode and failed to install the img then it has been restarted and the phon working normaly but with two issues .... first is every time after system starts up it shows error messege (update failed this should be a temporary issue .. we'll retry later) .....the second issue is that i can't enter recovery mode any more ... even withe hard method or software tools from the android system ... whenever i try to enter recovery mode it freezs in startup logo ... then i have to reboot it and it starts successfully .
i would like any help by pc or through apk app ... but pc not available for me now ... please try to make help without pc .
And thank you in advance .
If you can get to fastboot, just grab a rom from NeedRom, flash it and away you go.
I'm currently using a mtk phone ( allview v2 viper s ) , and what i want to do , is to copy the stock boot.img file from my phone , because i will need this file ( it needs to be patched in magisk ), and after that , i need to flash this image ( the patched one ) into my phone . I have installed the following programs :
- UniversalADBdriver
- Minimal adb and fastboot
I mentioned this , because i may need these programs to flash the specified patched image into my device .
Does anyone know a helpful method which works , ( i know , you need a pc to copy it , also DO i need the usb drivers in order to copy the boot image ? For eg : what driver do i need from media tek ? CDC , vcom ???
____ moving to the next step . After patching the stock boot image in magisk , i need to open a cmd prompt in minimal adb and fastboot and type the following command : fastboot boot ( and the image name , eg : if the image is called t.img , type fastboot boot t.img )
I would really appreciate to be helped , because magisk is the best rooting software for android , and in my case , it's very hard for me to install a custom recovery ( twrp ) because there are no official builds for my device . So , i'm supposed to use the method that i'm talking about right now .
leave me some suggestions , a program to copy the boot img file .
EDIT : , i also found this command adb pull /system systemdump , is it useful or ? I would like to use a program to pull the stock boot image.
Thanks you for replying to my post , if you have any solution ! Have a good day , guys !