Hi.
A year ago i got for free the Intellibook tablet with android 5.0
after some time my device crashed.
No it's showing: Entering DNX mode, waiting for fastboot command...
The company in Germany doesn't exist anymore. I cant get the stock rom.
The tablet looks the same as Nextbook Ares 8. (with bay trail cpu, 8GB internal memory)
I played with fastboot, but without luck. (now everything is erased)
Can someone help me to get back working android on it?
Also Nextbook Ares 8 provided firmware update tool don't recognize the tablet. So, it's not Nextbook i gues?!
Related
At first guys, excuse me if the topic isnt at right place but i cant find the right section.
So i have a Prestigio Multipad 8.0 HD (PMP5588C).I think i have bricked it.I erased NAND with Amlogic Image Burning Tool and now the device wont boot.The screen is black even when im charging it.I wont boot at all.I tried to boot in recovery but no succsess.Ive tried to boot it normally and in recovery (even when i charged it 10 hours usually it charges for 4 hours) but the screen is black.When i connect it with Power and Vol- buttons it shows up in the device manager as M6-CHIP and ive installed the drivers so now is World Cup Device.Ive tried to use Amlogic Image Burning Tool again but it fails on load spl.Any ideas?
Thanks in advance!
Best regards, Stoio.
Im sorry for my English but im from Bulgaria.
Unbrick amlogic tablets
Hello stoio
I have almost the same Tablet. It's a Prestigio PMP5580C, for me it is labeld as Intenso Tab 814, but they are completely the same. I have tried to find the u-boot.bin in the stock firmware, but I didn't sucess yet. I've downloaded several tools which allows me to make my 16 GB MicroSD card recognized as a 512 MB SD card, there I have to put the files on it to unbrick my tablet, it's amlogic (like my username) (someone told me that this is the chipset). It has a TOSHIBA TC58TEG6DCJTA00 NAND flash chip of 8 GB capazity. I also need help by getting my tablet unbricked.
In the future Inwant to learn with this amlogic based tablet how to create custom ROM's, recoveries and custom boot splash screens.
Thanks for any help, I reall appreciate your help,
Please note that I'm from Germany and my English is not good as it should used to be, but I have a dictionary (as a normal book) where I can get good communication with you. I like the idea of using english only.
Every Image (.img) were made with the dd command, I need to look inside in the images and open the content, I used a hex editor and tried to strip off the 2k of data, but I can't success. I'm using this tutorial:
I'm using this hex editor under linux: Okteta
I don't know how to delete the 2k of data. I need to know what content the partitions have to unbrick my amlogic based tablet, cause I'm seeing still the white android robot, and the charging battery or charged plugin picture, but this tablet doesn't have a bootloader or recovery so I'm out of ideas, the only way for me is to use a microsd card like an live cd to automatically let this tablet flash stock firmware, but where is it? Please help me out, I meight be wrong, it's possible that different repairing ways exist, too.
Hello,
I have a Samsung Note Tab 8, China version so it does not have Download Mode so I may be able to root it and install a custom ROM neither can upgrade the Android version to a later Android version. As far as I explore, the tablet has a Fast Boot mode where I can send commands via CMD from Windows 8. Tried to flash a ROM using ADB, but CMD says there is no device attached to the laptop. I am very stuck, and the tablet entered in LOOP when you boot it. Also the tablet has a Factory menu but is in Chinese and I do not understand a thing from that menu. As stated, Android version was 4.2.9 and the tablet model GT-N5100 according to About section of the tablet.
Is there any way I can make it work again ?
PS: All this started when I saw that the Android shown that out from 16 GB of storage, I was able to use only 4, and after I installed 4 or 5 applications the OS told me that I do have insufficient storage to install another app.
Regards,
Cosmin
Hi all,
Hoping someone might have some knowledge on this Chinese cheap build tablet.
Its an iRulu eXpro X1, model X10. Inside is the Allwinner A83T with 16Gb Rom and 1 Gb RAM.
This was previously with my daughter but we just upgraded her to a Sumsung Tab A, so I thought I'd play with the iRulu (bad mistake lol).
The iRulu was still running kitkat so I rooted it (Kingo Root works fine in anyone else is trying), attempted to install CWM and TWRP. Both failed, every attempt through adb / fastboot gave bootloader: secure mode fail error.
So I them decided to flash the new rom from iRulu's website - using PhoenixUSB.
All was going well, the tablet went into download mode (hold Esc button, plug USB cable in and press power button 10 times in rapid succession.) and the firmware started to download. At 80% PhoneixUSB threw a boot(0) error and stopped.
After this the tablet will not start (nothing on display) nor even show the charging icon on the screen! It does however still enter the download mode so I can try other images. So far I have tried 5 different images (including darkglow10.1_android5.1.img, A83T_N102_N1021L1BC_20151123.img) however all of then error when writing to the bootloader. I have also tried PhoenixCard to write an image in Startup mode - this gave nothing Live Suite makes no difference either, using the images I have.
Unfortunately the serial number has worn off the device so I cant be sure of the exact firmware from iRulu website to install. (I've mailed them for what its worth).
I have opened the device and the pcb is marked INET-N102-REV01 and Zeng-gc2014-12-22. Google has some stuff on it but nothing I understood
Does anyone have any thoughts? I'm concerned that the bootloader is locked / corrupt in some fashion which is stopping the download.
thanks
update: using the x1081 firmware from iRulu and PhoneixCard I have restore functionality. The device thinks its an expro x2 plus and it doesnt recognise the SD card slot (tried multiple cards) but other than that it seems okay
Will try to figure the correct firmware thou - anyone?
thanks
Having the same issue
Hello, I am having the same problems with that tablet, got it from this girl I'm seeing. It was freezing whenever it connected to the internet, I assume was a ROM issue, i flashed an incorrect recovery on it after getting frustrated. Can you please help?
I went to charge my tablet and noticed that it was stuck on the logo screen that displays "Insignia". So i rebooted the device but it reboots back to the same screen.Is there a stock rom or perhaps a rom out there i can use that is compatible ? ADB and the sdcard slot both work.I would need full instructions and the tools on how to perform this recovery.This is the last gift i received:crying: before my Dad passed away and i love it to death.PLEASE PLEASE PLEASE HELP if its possible.
I do know how to use PhoenixSuit
Tablet is an Insignia Flex 10.1 NS14T004.
Jelly Bean 4.1
Nvidia Tegra 3
16gb 1gb ram
I will be using a windows 10 64 bit computer to recover my tablet.
Hi. I have a Lenovo Tab 4 8 inch tablet (TB-8704F). I rooted the tablet and in the process of trying to get rid of the Wifi feature I tried deleting the file wlan.ko from /system/lib/modules. Now the tablet refuses to start and it's not detected by my computer. I assume it's soft or hard bricked. Anyone could help to re-soft it or something like that?
Any luck yet ?
Any luck yet? Can you get the device in Fastboot mode ? In case you need IMG files: Using the brilliant YouTube tutorial from RootJunky on 'How to pull your own stock Android firmware from your device', I have pulled BOOT.IMG, SYSTEM.IMG and RECOVERY.IMG from my device, TB-8704F - Android 8.1.0.