I'm looking to increase the charge speed of my phone with a QC3.0 charger, so I was wondering if any kernels have increased charging speed.
Try Radon Kernel 2.9 .
I am using it and my RN3 charges fast using qc charger 2.0
gulshanstrider said:
Try Radon Kernel 2.9 .
I am using it and my RN3 charges fast using qc charger 2.0
Click to expand...
Click to collapse
I'm using 3.0 of Radon, he mentions having QC "hacks" disabled for a while..
Related
I read that this phone doesn't have fast quick charge 2.0 and i tried to charge my phone with a Aukey charger and it's true, it doesn't have it but i tried with the original charger of my other phone (Moto X Pure) and an adapter to use micro-usb and surprise!!!
I use Ampere to measure the Max USB mA and the result was 1770Ma but when it is around 95% of battery it reduces to 660Ma.
Here is a screenshot of the charging performance. ( it says Pixel XL because of the modification on the Build Pro to have Google Asistent
I use CM14 and my phone it's not hot while charging.
It doesn't have fast charge no matter what adapter you use. 1770ma is normal as the stock adapter is 2 amps.
Wilsonn said:
It doesn't have fast charge no matter what adapter you use. 1770ma is normal as the stock adapter is 2 amps.
Click to expand...
Click to collapse
Something different it has because the original charger it's not too fast as it is.
Proof or didn't happen
Sent from my ONE A2005 using Tapatalk
fburgos said:
Proof or didn't happen
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
There you go!
That's the same current I get on stock or orzly cable on any of the 2amp chargers I have, and takes about two hours to get from 15% to 100%
How much time yours take?
Sent from my ONE A2005 using Tapatalk
Ive read that SD 650 supports quick charge 2.0 and it can b enabled using Agni/radon kernal.. Can someone suggest a good quick charger.. I tried moto g5s plus turbo charger but it heats up the device a lot.. Any other suitable one?
vgpranav said:
Ive read that SD 650 supports quick charge 2.0 and it can b enabled using Agni/radon kernal.. Can someone suggest a good quick charger.. I tried moto g5s plus turbo charger but it heats up the device a lot.. Any other suitable one?
Click to expand...
Click to collapse
use only 5v 2A chargers (original prefered) Do not use QC chargers or you will burn your charging board.
Use moto turbo charger I am using it
Hey there users, I would like to know does our redmi note 3 support fast charging.
not by default, you can flash custom kernels to enable fast charging
I'm using mi power bank 2 10000ma .it charges at 2000mA
Nabin Pokhrel said:
not by default, you can flash custom kernels to enable fast charging
Click to expand...
Click to collapse
Hey there, I'm currently using redmi note 3 with resurrection remix on it. So far it's awesome but during charging it takes too much time. I have tried few kernels on my device like radon kernel and unfortunately I had some issues like lagging performance and all and since then not a big fan of custom kernel. Even then I'll try if you say so I may have done something wrong during the installation process. Anyways thanks man for sharing your views thank you very much I apprecitiate you efforts thanks a lot
Sudhangshu said:
Hey there, I'm currently using redmi note 3 with resurrection remix on it. So far it's awesome but during charging it takes too much time. I have tried few kernels on my device like radon kernel and unfortunately I had some issues like lagging performance and all and since then not a big fan of custom kernel. Even then I'll try if you say so I may have done something wrong during the installation process. Anyways thanks man for sharing your views thank you very much I apprecitiate you efforts thanks a lot
Click to expand...
Click to collapse
Custom kernels may support USB fast charge ie they charge your phone at 900mA when connected to a USB 3.0 port. Remember this is not Qualcomm's quick charge which charges your phone at 5V, 9V, 12V which is not possible on Redmi note 3 since it lacks the hardware requirements.
ArK96 said:
Custom kernels may support USB fast charge ie they charge your phone at 900mA when connected to a USB 3.0 port. Remember this is not Qualcomm's quick charge which charges your phone at 5V, 9V, 12V which is not possible on Redmi note 3 since it lacks the hardware requirements.
Click to expand...
Click to collapse
Well thanks man for the info.
ArK96 said:
Custom kernels may support USB fast charge ie they charge your phone at 900mA when connected to a USB 3.0 port. Remember this is not Qualcomm's quick charge which charges your phone at 5V, 9V, 12V which is not possible on Redmi note 3 since it lacks the hardware requirements.
Click to expand...
Click to collapse
HEY MAN.. will it cause any harm to my phone if i use xiaomi qc 3.0 charger with Usb fast charge enabled in my rom ?
What charging speed does POCO F1 Custom Kernels support? As SD845 supports QC 4+ does it support 30W or 27W charging?
veenaprem said:
What charging speed does POCO F1 Custom Kernels support? As SD845 supports QC 4+ does it support 30W or 27W charging?
Click to expand...
Click to collapse
I use USB PD charging but it slow than old QC 2 charging. Below 2000mA
First USB pD Baseus brand. Second pict QC2 is Aukey brand
Alvian_P said:
I use USB PD charging but it slow than old QC 2 charging. Below 2000mA
First USB pD Baseus brand. Second pict QC2 is Aukey brand
Click to expand...
Click to collapse
But there is 27W fast charging support for Xiaomi Mi A2 custom kernel
Intresting question...i will definitely want to hear from more knowledgeable guys on this
veenaprem said:
What charging speed does POCO F1 Custom Kernels support? As SD845 supports QC 4+ does it support 30W or 27W charging?
Click to expand...
Click to collapse
I have 3500 ma charging with stock charger and leeco qc3.
Seshstation kernel
D1stRU3T0R said:
I have 3500 ma charging with stock charger and leeco qc3.
Seshstation kernel
Click to expand...
Click to collapse
Are you sure? Can we have a ss and temprature while on charging..if you share ss please mention thats with orignal and thats with leeco charger
never tried 18/44 volts charger on custom kernel!
however on 5v it takes approx 2 hours to charge but if you switchoff mobile , it charges even faster but thats not recomended!
If my phone standby while charge, charger process is fast.
I searched the net for an answer for that question. But noone really described charging poco with qc4+ charger as its hard to obtain. Original charger is good enough as its 18W. I told myself to check the current while charging to my friend's mi9 charger, but I haven't done it yet.
Does stock kernel block more than 18w?
Im rooted on stock TQ1A.230205.002 with radioactive kernel.
How do I enable fast charging? It worked on one rom but I can't remember which one. I have force fast charging enabled on fkm but still no luck
Everything I've read says fast charging isn't supported. 18w is the max even on the official 30w charger.