Related
Hey guys, i just wanted to know if my Z2 (D6503) have the qualcomm's quick charge 2.0, but ofcourse it hase it since it is sd801 packed, but is it enabled in the stock rom? Or maybe stock-based like existenz.
Because im planning to buy the motorola turbo charger.
http://www.motorola.com/us/accessor...Turbo-Charger/motorola-turbo-charger-pdp.html
And also, if anybody knows any other charger that is packed by quick charge 2.0, and cheaper price
Not enabled, its disabled for safety because under testing with it enabled the device became very hot
I'm planning to get a 9V 2.5A DC power supply and find out.
V4LKyR said:
I'm planning to get a 9V 2.5A DC power supply and find out.
Click to expand...
Click to collapse
Whitepaper for Z2 says Upto 3A is safe
Up to how many Volts though?
V4LKyR said:
Up to how many Volts though?
Click to expand...
Click to collapse
Typical usb voltage 5V
V5
3A
Its what i saw on another thread where a few users were using such a thing
Envious_Data said:
Typical usb voltage 5V
V5
3A
Its what i saw on another thread where a few users were using such a thing
Click to expand...
Click to collapse
It must handle 9V 3A too
V4LKyR said:
It must handle 9V 3A too
Click to expand...
Click to collapse
9V may be too much
Maximum and typical avarage USB cable voltage is 4.9V... 5V basicly
Thanks
Hi guys,
Anyone know what if I use Galaxy S6 quick charger for charging my G3? Quick Charge will work or not? Thanks.
Bump?
LG G3 supports Quickcharge 1.0 so it will charge faster with a Quickcharger compared to standard 2.0Amp charger but not as fast as a phone with Quickcharge 2.0 capability. All of my chargers home and car are now Quickcharge 2.0
Use the 1.8 stock charger that it came with
someguyatx said:
LG G3 supports Quickcharge 1.0 so it will charge faster with a Quickcharger compared to standard 2.0Amp charger but not as fast as a phone with Quickcharge 2.0 capability. All of my chargers home and car are now Quickcharge 2.0
Click to expand...
Click to collapse
i thought it support quick charge 2.0 since it use snapdragon 800 series
OtakuLi said:
i thought it support quick charge 2.0 since it use snapdragon 800 series
Click to expand...
Click to collapse
Then it should works...
OtakuLi said:
i thought it support quick charge 2.0 since it use snapdragon 800 series
Click to expand...
Click to collapse
Yes Snapdragon 800 series phones so support this in the chipset but it's up to the phone manufacturer to complete the charging circuit. Apparently LG didn't put in a Quick charge 2.0 compliant part in the second half of the charging circuit. Quick charge 2.0 uses 5V, 9V and 12V to charge faster. The G3 doesn't have the capability to charge on all of those voltages. Can't remember exactly what we have but it's Quick charge 1.0 compliant.
Bottom line get a good Quick charge 2.0 charger and it will charge this phone faster than a standard charger.
for me Stock charger G3 charge my phone 2%-100% in 2h . Today I buy samsung charger that have fast charger and charge my phone 2%-100% in 1h 45m .
I hear some G3 kernels have fast charge . which kernel have fast charge ? and its safe to use fast charge for this phone ? I know its active in kernel auditor app battery setting .
someguyatx said:
Yes Snapdragon 800 series phones so support this in the chipset but it's up to the phone manufacturer to complete the charging circuit. Apparently LG didn't put in a Quick charge 2.0 compliant part in the second half of the charging circuit. Quick charge 2.0 uses 5V, 9V and 12V to charge faster. The G3 doesn't have the capability to charge on all of those voltages. Can't remember exactly what we have but it's Quick charge 1.0 compliant.
Bottom line get a good Quick charge 2.0 charger and it will charge this phone faster than a standard charger.
Click to expand...
Click to collapse
Oh i see
Btw I should not damage battery If I use S6 charger?
Hi, got the Nexus 6. Don't have the Motorola Turbo charger with it and it's not available in my country. Can you please help me in choosing the best quick charger from the ones available in my country? Here are some of the quick chargers that I can buy:
1. Tronsmart TS-WC1Q
2. Aukey PA-U28 Turbo
3. Tronsmart TS-WC3PC Quick Charge 2.0
4. USAMS US Plug Qualcomm Quick Charge 2.0 EPA-466644
5. Pisen Quick Charge 2.0 QC2.0 TS-C057
6. ROCK Quick Charge 2.0
Thanks in advance
yasirrfc said:
Hi, got the Nexus 6. Don't have the Motorola Turbo charger with it and it's not available in my country. Can you please help me in choosing the best quick charger from the ones available in my country? Here are some of the quick chargers that I can buy:
1. Tronsmart TS-WC1Q
2. Aukey PA-U28 Turbo
3. Tronsmart TS-WC3PC Quick Charge 2.0
4. USAMS US Plug Qualcomm Quick Charge 2.0 EPA-466644
5. Pisen Quick Charge 2.0 QC2.0 TS-C057
6. ROCK Quick Charge 2.0
Thanks in advance
Click to expand...
Click to collapse
Check the capacity of the chargers.
The original M-charger has a capacity of 1,6 A at 5V. You can use any charger with at least that capacity.
NLBeev said:
Check the capacity of the chargers.
The original M-charger has a capacity of 1,6 A at 5V. You can use any charger with at least that capacity.
Click to expand...
Click to collapse
Thanks. However, i also wanted to know the experience of existing users with these chargers, including power issues etc. I think I saw somewhere that the micro USB side of a quick charger melted when it was kept on in the power socket?
yasirrfc said:
Thanks. However, i also wanted to know the experience of existing users with these chargers, including power issues etc. I think I saw somewhere that the micro USB side of a quick charger melted when it was kept on in the power socket?
Click to expand...
Click to collapse
Get the Aukey one, it has a really really good review rate at Amazon. It also should come with a cable so you shouldn't be worried about that one.
yasirrfc said:
...wanted to know the experience of existing users with these chargers, including power issues etc.
Click to expand...
Click to collapse
I prefer wireless charging for my N4 and N6.
I am using cheap QI-chargers on several places. The QI-pads can be used with almost any USB charger. Of course wireless charging is slow.
I'm thinking of going with the Tronsmart WC1Q as it is cheap and has good Amazon reviews. I'm not really technical when it comes to chargers. This is the technical info: 5V/2.1A 9V/2A 12V/1.5A. Can anyone confirm if the power details of this charger will be fine with Nexus 6?
yasirrfc said:
I'm thinking of going with the Tronsmart WC1Q as it is cheap and has good Amazon reviews. I'm not really technical when it comes to chargers. This is the technical info: 5V/2.1A 9V/2A 12V/1.5A. Can anyone confirm if the power details of this charger will be fine with Nexus 6?
Click to expand...
Click to collapse
As long as it is Certified by qualcomm you should be fine.
Check this and if its mentioned there you can buy it:
https://www.qualcomm.com/documents/quick-charge-device-list
blanco2701 said:
Get the Aukey one, it has a really really good review rate at Amazon. It also should come with a cable so you shouldn't be worried about that one.
Click to expand...
Click to collapse
I recommend the aukey as well, I used it for my moto x 2nd gen and now my Nexus 6.
I got a Aukey one, and it's really great
In my experience and from others Anker makes good products might want to check into them. And a good charging cable is just as important.
Sent from my Nexus 6 using Tapatalk
I have an Aukey and a Tronsmart. Both work well. Strangely enough, the quality of your USB cable also appears to play a legitimate role in whether Quick Charge2.0 is consistently recognized and used. In other words, high quality charger AND high quality cable is recommended!
just want to ask if there is any correlation between using QC chargers & getting a bloated battery?
yasirrfc said:
I'm thinking of going with the Tronsmart WC1Q as it is cheap and has good Amazon reviews. I'm not really technical when it comes to chargers. This is the technical info: 5V/2.1A 9V/2A 12V/1.5A. Can anyone confirm if the power details of this charger will be fine with Nexus 6?
Click to expand...
Click to collapse
Most important is the 5V/2.1A. This is better than the original Motorola charger I have.
The other values are for Quick charging.
Also better than the original charger.
But I don't know if this Tronsmart is compatible with the quick charging mode of Motorola.
iluvatrix said:
just want to ask if there is any correlation between using QC chargers & getting a bloated battery?
Click to expand...
Click to collapse
Not at all... the phone is made to be compatible with QC. You can even use the QC charger with a phone that doesn't support it, what will happen is that the charger won't activate the QC and just charge at normal speed.
NLBeev said:
Most important is the 5V/2.1A. This is better than the original Motorola charger I have.
The other values are for Quick charging.
Also better than the original charger.
But I don't know if this Tronsmart is compatible with the quick charging mode of Motorola.
Click to expand...
Click to collapse
As long as it is Qualcomm 2.0 Certified it is supposed to work. Motorola's "turbo charge" is just a rebranded Qualcomm 2.0 Quick Charge.
I have just tried the Aukey in your list with my N6 and it did not work as a fast charger even tough the specs of the charger says so. to get the N6 to charge at QC2 you will need a charger with 9V 2A or at least 1.6A to reach approximately 14.4 watt.
many chargers do have the said specs but they won't recognize the N6 as a fast charging phone unfortunately. meanwhile still searching
ROIDjoy said:
I have just tried the Aukey in your list with my N6 and it did not work as a fast charger even tough the specs of the charger says so. to get the N6 to charge at QC2 you will need a charger with 9V 2A or at least 1.6A to reach approximately 14.4 watt.
many chargers do have the said specs but they won't recognize the N6 as a fast charging phone unfortunately. meanwhile still searching
Click to expand...
Click to collapse
My aukey works just fine, been using it for a while now. I even have a aukey portable battery charger with QC 2.0 and it works great as well, especially when I go out and play Pokémon Go
chapelfreak said:
My aukey works just fine, been using it for a while now. I even have a aukey portable battery charger with QC 2.0 and it works great as well, especially when I go out and play Pokémon Go
Click to expand...
Click to collapse
Thanks for your reply then it must be the piece that I have used had some problem
Sent from my HUAWEI NXT-L29 using XDA-Developers mobile app
I use this one and it works perfectly for me. It has an LED that changes color depending on whether it is in normal charging or fast charging mode. Unfortunately, I don't think it is on your list.
Fred
I am getting a kind of a weird experience this end. I use my Huawei quick charger of the mate 8, and it is only recognized by the Motorola Nexus 6 as a fast charger after I reboot the mobile then it starts charging at 9.15 V and 1.36 Amps. it does fast charge at this volt and amps at highs of 2240 mAps on Ampere application !!
I could not figure out another way to get the charger to recognize the Nexus 6 as a fast charging phone except by rebooting, and still working on it. in the meantime I have ordered a Choetech QC 3.0 and waiting for arrival. my question does this happen on your chargers or does it connect directly to 9V when connected to chargers like Aukey, Tronsmart, Anker etc. ??
Guys, is it normal that the phone get heated like an iron box when charging ? ( Well I noted that this happens only if my battery is below 50-60% ) Using Stock charger. Same happens (heating, but temperature is lower than before) even when I use One+ charger.
To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the Xiaomi Redmi Note 5 can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
last week i bought a Redmi 5 Plus 4gb/ 64gb Global then i tried to test charge time and quick charge.. 3-4 times with a qualcomm QC 3.0 charger and another QC 2.0 charger.. The results are similar: all about 2 hour.. the charge time with Xiaomi's own 2A Charger it take about 2 and half hour. i know its good but not so good.. By the way i notice that when test with QC3.0 charger it can not charge with 12V.. (i used a usb tester to see voltage and Current) i just saw 9.30v as max voltage. its behave look like QC2.0 not QC3.0
Snapdragon 625 should be support QC3.0 isnt it?
Are there anyone test quick charge?
I have a QC 2.0 charger,takes about 2 hour to fully charge my R5 phone... don't have tester to measure voltage,but phone doesn't heats up,its around 28 C when charging.Charger does
all my qc3.0 tests take 2 hours too. i see my qc 3.0 charger work as qc 2.0 charger. maybe my charger not work as qc 3.0 maybe our phone not support qc 3.0 we will see... i will buy a new qc 3.0 charger and i will test it again then i share the results here too.
using moto g4 plus turbo charger . charging speed 2600+mah . takes approx 1 n half hr.
rajit said:
using moto g4 plus turbo charger . charging speed 2600+mah . takes approx 1 n half hr.
Click to expand...
Click to collapse
thats good score :good::good: but i ordered another qc3.0 adaptor from aliexpress it has 3 port, i will share the score about a mont later
I think it has QC 2.0 instead of 3.0
A QC 3.0 charger is backward compatible.
redsfury said:
I think it has QC 2.0 instead of 3.0
A QC 3.0 charger is backward compatible.
Click to expand...
Click to collapse
i agree with you
welll my new charger delivered me from china, so i tested it a few times. its better than my qc2.0 charger and my other qc3 car charger ( i think its not qc3.0 its just qc2.0 ) My new charger is not as good as expected.. charge time is an hour and 45 minutes. .. its mean 15 min better than qc.2.0 ... i saw 10.1v and 1,35 amp on my usb tester, it could be 12v... Anyway we can see that the phone supports qc 3.0 but not at all its need powerfull and good qualty QC3.0 charger, so if you want to buy a QC3 charger i I recommend that you need to research well.
amedian said:
thats good score :good::good: but i ordered another qc3.0 adaptor from aliexpress it has 3 port, i will share the score about a mont later
Click to expand...
Click to collapse
I'm planning to buy my Xiaomi Redmi 5 Plus from AliExpress. Do you advise me to do so,?
I use my Axon 7 charger which works fine.
Envoyé de mon Redmi Note 5 en utilisant Tapatalk
I've seen mine go up to 2600 mah with a samsung quick charge adaptor, don't know waht version of QC thou, 1.5 hours to 100%.
Cheers!
Ramon S.
I'm using my old charger from vivo , is this normal charging speed?
I tried a charger that is certified by Qualcomm with QC3.0 and got around 2470 mAh (4.171 V)
PLease help! I am facing some battery calibration issues. The phone hardly charges up to 100% no matter how long you charge it. It just gets stuck at 96% or 97% and then the phone goes off at 19% on usage. I have tried different calibration apps to no avail. I even did a clean flash using the miflash tool, still no luck. Somebody help o
mathefaro said:
PLease help! I am facing some battery calibration issues. The phone hardly charges up to 100% no matter how long you charge it. It just gets stuck at 96% or 97% and then the phone goes off at 19% on usage. I have tried different calibration apps to no avail. I even did a clean flash using the miflash tool, still no luck. Somebody help o
Click to expand...
Click to collapse
You are not alone. R5 plus and some another xiaomi device, sometimes we see this problem. And there is no software solution. Wipe, mi flash, battery calibrationi root... I tried everything but no luck.
Only solution is;
Remove the back cover (i did it, its not so difficult.)
Remove the battery connector plug
Wait a few seconds
Plug it back.
Thats done. Problem solved.
https://www.youtube.com/watch?v=JkeP30myjF8
amedian said:
welll my new charger delivered me from china, so i tested it a few times. its better than my qc2.0 charger and my other qc3 car charger ( i think its not qc3.0 its just qc2.0 ) My new charger is not as good as expected.. charge time is an hour and 45 minutes. .. its mean 15 min better than qc.2.0 ... i saw 10.1v and 1,35 amp on my usb tester, it could be 12v... Anyway we can see that the phone supports qc 3.0 but not at all its need powerfull and good qualty QC3.0 charger, so if you want to buy a QC3 charger i I recommend that you need to research well.
Click to expand...
Click to collapse
Can you please confirm whether it supports quick charge 3.0 ?
I`m about to buy a mi quick charge 3 adapter.
You can post screenshot of your file located at /sys/class/power_supply/battery/uevent
Just want to be sure. That`s it.
I know I might be late but I'm getting around 4.4v is that normal?
kemdroid said:
I know I might be late but I'm getting around 4.4v is that normal?
Click to expand...
Click to collapse
if you use normal charger. im also getting 4.4V. You can try quick charge 2 or higher (it`s compatible)
paulb86 said:
if you use normal charger. im also getting 4.4V. You can try quick charge 2 or higher (it`s compatible)
Click to expand...
Click to collapse
Actually I heard it's fine. I'm using quick charge 3.0. Redmi Note 5 AI/Global. Fully charges from 0 in 1hr 50 mins.
What charging speed does POCO F1 Custom Kernels support? As SD845 supports QC 4+ does it support 30W or 27W charging?
veenaprem said:
What charging speed does POCO F1 Custom Kernels support? As SD845 supports QC 4+ does it support 30W or 27W charging?
Click to expand...
Click to collapse
I use USB PD charging but it slow than old QC 2 charging. Below 2000mA
First USB pD Baseus brand. Second pict QC2 is Aukey brand
Alvian_P said:
I use USB PD charging but it slow than old QC 2 charging. Below 2000mA
First USB pD Baseus brand. Second pict QC2 is Aukey brand
Click to expand...
Click to collapse
But there is 27W fast charging support for Xiaomi Mi A2 custom kernel
Intresting question...i will definitely want to hear from more knowledgeable guys on this
veenaprem said:
What charging speed does POCO F1 Custom Kernels support? As SD845 supports QC 4+ does it support 30W or 27W charging?
Click to expand...
Click to collapse
I have 3500 ma charging with stock charger and leeco qc3.
Seshstation kernel
D1stRU3T0R said:
I have 3500 ma charging with stock charger and leeco qc3.
Seshstation kernel
Click to expand...
Click to collapse
Are you sure? Can we have a ss and temprature while on charging..if you share ss please mention thats with orignal and thats with leeco charger
never tried 18/44 volts charger on custom kernel!
however on 5v it takes approx 2 hours to charge but if you switchoff mobile , it charges even faster but thats not recomended!
If my phone standby while charge, charger process is fast.
I searched the net for an answer for that question. But noone really described charging poco with qc4+ charger as its hard to obtain. Original charger is good enough as its 18W. I told myself to check the current while charging to my friend's mi9 charger, but I haven't done it yet.
Does stock kernel block more than 18w?