Hi guys,
Anyone know what if I use Galaxy S6 quick charger for charging my G3? Quick Charge will work or not? Thanks.
Bump?
LG G3 supports Quickcharge 1.0 so it will charge faster with a Quickcharger compared to standard 2.0Amp charger but not as fast as a phone with Quickcharge 2.0 capability. All of my chargers home and car are now Quickcharge 2.0
Use the 1.8 stock charger that it came with
someguyatx said:
LG G3 supports Quickcharge 1.0 so it will charge faster with a Quickcharger compared to standard 2.0Amp charger but not as fast as a phone with Quickcharge 2.0 capability. All of my chargers home and car are now Quickcharge 2.0
Click to expand...
Click to collapse
i thought it support quick charge 2.0 since it use snapdragon 800 series
OtakuLi said:
i thought it support quick charge 2.0 since it use snapdragon 800 series
Click to expand...
Click to collapse
Then it should works...
OtakuLi said:
i thought it support quick charge 2.0 since it use snapdragon 800 series
Click to expand...
Click to collapse
Yes Snapdragon 800 series phones so support this in the chipset but it's up to the phone manufacturer to complete the charging circuit. Apparently LG didn't put in a Quick charge 2.0 compliant part in the second half of the charging circuit. Quick charge 2.0 uses 5V, 9V and 12V to charge faster. The G3 doesn't have the capability to charge on all of those voltages. Can't remember exactly what we have but it's Quick charge 1.0 compliant.
Bottom line get a good Quick charge 2.0 charger and it will charge this phone faster than a standard charger.
for me Stock charger G3 charge my phone 2%-100% in 2h . Today I buy samsung charger that have fast charger and charge my phone 2%-100% in 1h 45m .
I hear some G3 kernels have fast charge . which kernel have fast charge ? and its safe to use fast charge for this phone ? I know its active in kernel auditor app battery setting .
someguyatx said:
Yes Snapdragon 800 series phones so support this in the chipset but it's up to the phone manufacturer to complete the charging circuit. Apparently LG didn't put in a Quick charge 2.0 compliant part in the second half of the charging circuit. Quick charge 2.0 uses 5V, 9V and 12V to charge faster. The G3 doesn't have the capability to charge on all of those voltages. Can't remember exactly what we have but it's Quick charge 1.0 compliant.
Bottom line get a good Quick charge 2.0 charger and it will charge this phone faster than a standard charger.
Click to expand...
Click to collapse
Oh i see
Btw I should not damage battery If I use S6 charger?
Related
With my Note 22 I used an app called "Galaxy Charging Current". Unfortunately it doesn't work on this phone. With the best charger & cable, the Note 2 showed 1800mA charging. I am looking for an App that would give me similar information with the V10.
Ampere seems to work with the V10:
https://play.google.com/store/apps/details?id=com.gombosdev.ampere
currently using Ampere but getting mixed results
I use GSAM Battery Monitor.
with GSam & 35‰ charged it said the charger was charging @ 196mA. If that were so, then the factory fast charger is defective.
With Ampere & 45% charged it said the charger was charging @ 930mA. If that were so, then the factory fast charger is defective.
My Note 2 charges @ 1800mA and does not know what a fast charger is.
Sent from an AT&T LG V10
I use Battery Monitor Widget Pro. Best I've used so far to monitor battery usage. Haven't actually used it on my V10 but this post just reminded me to install it.
RDI said:
with GSam & 35‰ charged it said the charger was charging @ 196mA. If that were so, then the factory fast charger is defective.
With Ampere & 45% charged it said the charger was charging @ 930mA. If that were so, then the factory fast charger is defective.
My Note 2 charges @ 1800mA and does not know what a fast charger is.
Sent from an AT&T LG V10
Click to expand...
Click to collapse
quick charge 2.0 increases voltage to phone and drops the amps.
so a 5v 2.4a charger will put out around 1800mA (1.8a) on a note 2, the V10 with QC2.0 @ 930mA is prob feeding phone 9-12 volts
istehwin said:
quick charge 2.0 increases voltage to phone and drops the amps.
so a 5v 2.4a charger will put out around 1800mA (1.8a) on a note 2, the V10 with QC2.0 @ 930mA is prob feeding phone 9-12 volts
Click to expand...
Click to collapse
So fast charge capabilities are screwing around with our battery monitoring apps?
Or rather screwing our perception of speed of charge and ma draw?
Ampere.. been using it for years
Sent from my SM-N9200 using XDA Free mobile app
Ampere actually broke my "Estimated time remaining" under battery & storage settings. Just would sit on "calculating... please wait."
Uninstalled it and it's back to working again.
Sent from my LG-H901 using XDA Free mobile app
Techlyfe said:
So fast charge capabilities are screwing around with our battery monitoring apps?
Or rather screwing our perception of speed of charge and ma draw?
Click to expand...
Click to collapse
correct
istehwin said:
correct
Click to expand...
Click to collapse
So to sum up...
930 on a V10 is "the same" as 1800 on a note 2?
I also came from a note 2 and have been confused as heck trying to figure out if my v10 is charging at a decent rate.
I never have a problem with the oem charger but I was on a car trip and using an external battery pack and also tried plugging in to my car stereo but couldn't figure out how to "read" the charging apps.
Sent from my pretty nifty brand new LG V10
lol... I too came from a Note 2
RDI said:
with GSam & 35‰ charged it said the charger was charging @ 196mA. If that were so, then the factory fast charger is defective.
With Ampere & 45% charged it said the charger was charging @ 930mA. If that were so, then the factory fast charger is defective.
My Note 2 charges @ 1800mA and does not know what a fast charger is.
Sent from an AT&T LG V10
Click to expand...
Click to collapse
Take note that the v10 turns off fast charging while screen is on. And ampere is a gesstimate, no app can give you presice. Need to use a USB Doctor sleeve for better results.
Unfortunately Ampere remeassures every time the screen turns on. I used the paid version widget.
Additional note. Fast chargers and fast charging is not the same as Qualcomm Quick Charge 2.0.
A 2.4A charger will not quick charge qc 2.0 LG v10 in this case any faster than an old Iphone cube.
You need a qc (qualcomm) 2.0 compatible quick charger and decent cable. Zerolemon, aukey, tronsmart, Motorola turbo qc 2.0 chargers works great.
The LG v10 is capable of 2400-2850mA. Slightly slower then the Nexus 6, but faster than the G4.
The stock charge that comes with the v10 is qc 2.0 [email protected] or [email protected] max. Some chargers can do 12v, ZeroLemon is one.
Ampere's XDA forum http://forum.xda-developers.com/android/apps-games/app-ampere-charging-meter-t3012890
clockcycle said:
Take note that the v10 turns off fast charging while screen is on. And ampere is a gesstimate, no app can give you presice. Need to use a USB Doctor sleeve for better results.
Unfortunately Ampere remeassures every time the screen turns on. I used the paid version widget.
Additional note. Fast chargers and fast charging is not the same as Qualcomm Quick Charge 2.0.
A 2.4A charger will not quick charge qc 2.0 LG v10 in this case any faster than an old Iphone cube.
You need a qc (qualcomm) 2.0 compatible quick charger and decent cable. Zerolemon, aukey, tronsmart, Motorola turbo qc 2.0 chargers works great.
The LG v10 is capable of 2400-2850mA. Slightly slower then the Nexus 6, but faster than the G4.
The stock charge that comes with the v10 is qc 2.0 [email protected] or [email protected] max. Some chargers can do 12v, ZeroLemon is one.
Click to expand...
Click to collapse
Does it matter what cord is used?
I have the Aukey charging station..wish that power cord was longer
porscheoscar said:
Does it matter what cord is used?
I have the Aukey charging station..wish that power cord was longer
Click to expand...
Click to collapse
Yes in my experience, the quality of the cable makes a difference. I'm not sure if its the actual thickness or connections. I have a 6 foot braided flat cable that doesn't always fast charge on wall charger, but I have a 3 foot flat that does in the car. When I use my better cables it works every time.. I don't know if length makes a difference.
Yes, when I was using my Samsung Note 2 and an app called Galaxy Charging Current you could see the difference in mA. Using an Anker charger and a good cable got it up to 1800mA. It is harder to find longer cables that do not produce a loss. The quality of the conductor (metal /copper) shows up here. I wish that "Galaxy Charging Current" worked on the LG V10.
Sent from an AT&T LG V10
Try ampere... https://play.google.com/store/apps/details?id=com.gombosdev.ampere
Sent from my LG-H901 using Tapatalk
i use this cable by Zikko 1.5m long and max my note 2 with 1800mA. Also the cable works great with LG v10 and support Fast charging. Not only that the quality of the cable is superb. i broke one when my phone fell during charging and it landed on the the bottom first causing the micro usb from cable crooked. beside that the cable is great. http://www.hersheng.com/sites/default/files/1403253142.jpg
According the specification out V10 supports Quick Charge 2.0.
Does this mean any charge that support Quick Charge 2.0 should work? or it more hit or miss?
I purchased this http://www.amazon.com/gp/product/B0144S0PDK
and when I connect it I don't see it indicating quick charge.
thanks
This one is tricky. Regular high-amp (2.1A) chargers don't seem to do the trick; its more about amps AND volts on this phone. The only other charger I've gotten 'fast charging' to work with is the Motorola Turbocharger I got with my Nexus 6. I suppose if you found a charger that outputs the same amperage and voltage as the LG charger it would work, in theory.
The charger that came with mine is a fast charge charger. It shows fast charge when I plug it in.
The charger that comes with does indicate quick charging when I plug it in to it.
But the car charger that I purchased that claims quick charging support does not indicate quick charging when I plug it in.
Was looking for others experience to decide if I should return and complain.
Unless the chargers say that they are Quick Charge 2.0 or 3.0 they don't quick charge our phones. AC or Cigarette lighter charger. Now, there is at least one brand of charger out there that @ 5 volts DC used to charge my Note 2 at 1800mA, but it was smart not quick.
Sent from an AT&T LG V10
It does..i bought a quick charger for my htc one m9 before and it shows the fast charging when i tether the v10 to it
The phone will detect if it will quick charge when connected to a QC 2.0, you don't get a QC when you plug it in instantly, it will also depend on how much power you already have in the phone.
Aukey is a authorized with QC 2.0 and is listed in Qualcomm site.
I've got the power..
stevenlong said:
According the specification out V10 supports Quick Charge 2.0.
Does this mean any charge that support Quick Charge 2.0 should work? or it more hit or miss?
I purchased this http://www.amazon.com/gp/product/B0144S0PDK
and when I connect it I don't see it indicating quick charge.
thanks
Click to expand...
Click to collapse
thedrizzle said:
This one is tricky. Regular high-amp (2.1A) chargers don't seem to do the trick; its more about amps AND volts on this phone. The only other charger I've gotten 'fast charging' to work with is the Motorola Turbocharger I got with my Nexus 6. I suppose if you found a charger that outputs the same amperage and voltage as the LG charger it would work, in theory.
Click to expand...
Click to collapse
RDI said:
Unless the chargers say that they are Quick Charge 2.0 or 3.0 they don't quick charge our phones. AC or Cigarette lighter charger. Now, there is at least one brand of charger out there that @ 5 volts DC used to charge my Note 2 at 1800mA, but it was smart not quick.
Sent from an AT&T LG V10
Click to expand...
Click to collapse
What RDI said.
"Quick Charge" is not "Fast Charge" or "Adaptive Charge" - All of my 2.4amp Fast Chargers do not charge the G4 or v10 any faster than an old iphone power cube. YMMV
The V10 is Quick Charge qc (Qualcomm) 2.0.
There are already a couple of threads on the subject. here and here
@ZEROLEMON_OFFICIAL makes one of the best IMHO. Anker, Aukey/Tronsmart, and Motorola Turbo Chargers have qc 2.0 compatible ones. (always a sale on groupon or slickdeals)
Our phone, like the LG G4 switches to Quick Charge when the main screen is off. And tones it down to standard charging speed if you have the main screen on. The v10 Quick Charges at about 2850mA, slightly faster than the G4 at 2000~2200mA, but slower than the Nexus 6 at 2700~3200mA.
Attached are results by CoNsPiRiSiZe on this AT&T variant, and mine on Tmobile variant. Also included is my USB Doctor Sleeve using a Motorola Turbo Charger plugged into the v10 with screen off.
I am using the Samsung adaptive car charger while driving and it shows fast charging on the lockscreen
Sent from my LG-H961N using Tapatalk
Turns out I had a bad aukey charger, I bought another for my wife and it works fine, show quick charge.
Returning the bad one and getting another.
@clockcycle how are you able to measure current using ampere with display turned off?
BurtGummer said:
@clockcycle how are you able to measure current using ampere with display turned off?
Click to expand...
Click to collapse
I have paid version with notificaion ebabled. But you can run it, leave phone alone so it can meassure. Then turn on screen and screenshot results. It takes a few seconds before it drops or remeassures.
Do these really charge all that much faster than a 2.1a charger? Debating if it's worth it to go invest into a few of these QC chargers.
Thanks
adambean said:
Do these really charge all that much faster than a 2.1a charger? Debating if it's worth it to go invest into a few of these QC chargers.
Thanks
Click to expand...
Click to collapse
QC 2.0 allows up to a maximum of 3A of current. Every QC 2.0 enabled device will vary slightly in how much power they can draw due to internal circuitry. The V10 charges at about 2.85A as shown by Clockcyle so yes, a QC 2.0 charger will charge faster than a standard 2.1A charger.
Excellent, thank you! Going to pick up some of them now then.
Someone use qualcomm fast charger? Is it work on G3?
it works but does not uses qualcomms quickcharge 2.0 but it does charges my g3 a little bit faster than my stock charger.i am using aukeys quick charger.
^same here, aukey 1 port quickcharge 2
the Lg G3 is a funny case, the Snapdragon 801 supports QC 2.0, meaning it can charge at 7 and 9v.
BUT... Lg disabled the native SoC charge/battery controller and used a external Texas instruments one which removes QC 2.0 capability.
I mresured it and more or less the Lg G3 charges at 1400mA at 5v even when using a Aukey QC 2.0 charger.
That really piss me off so much when changing from note 3 to g3. Note 3 even charge 2-3 times quicker than g3.
When i plug in the charger on my note 3, and still using it while charging, took me around 60-90 mins to get full.
But with my g3, took me around 180-260 mins to get full when using it at same time.
Cant understand at all, so freaking slow =.=
I thought those quick charge can fckup your battery ?
Im using a Quickcharger from Anker with a USB from Anker too and its sooo much faster like the stock. Cant say if its fast as possible, but under normal usage while loading it takes me 40-50mins. Without using 20mins i think.
BrunoSlivar said:
Someone use qualcomm fast charger? Is it work on G3?
Click to expand...
Click to collapse
I use the real QC fast charge 2.0 and it does work. You have to enable it on the kernel level to fully utilize it. I am using a custom AOSP ROM with the the Nebula Kernel, and Kernel Adiutor to enable the fast charging.
A word of warning, however: Do not leave it on the charger after it's charged and do not use the phone while its fast charging, it will overheat the battery and possibly ruin it, or shut off the phone, or both.
Guys, what if I use Galaxy S6 quick charger to recharge my G3? It will work?
here on stock rom v30c using some Samsung 5v 2A charger from 7% to 100% in 80-90 minutes. fast enough for me
Hi i read that redmi 5 plus support qc so i had aquired samsung quick charger.When plugged phone shows quick charging but when i mesure mA while charing with qc and with normal charger there is no big difference according mesuring software.So what is real truth about qc?
petric1 said:
Hi i read that redmi 5 plus support qc so i had aquired samsung quick charger.When plugged phone shows quick charging but when i mesure mA while charing with qc and with normal charger there is no big difference according mesuring software.So what is real truth about qc?
Click to expand...
Click to collapse
Redmi 5 Plus supports QC (3.0 to be exact, as it's Snapdragon 625). Apps measuring charge rate won't show you real current, it's only approximation.
I've tested my charger, which supports QC 3.0, my 5+ uses 9Volts at almost 2Amps (when charging from 15-20%). Measuring software won't show you voltage that you are using to charge so you may not see the difference. But doing quick math - 5V*2A=10W (standard charging brick) whereas QC charger will use 9V*2A=18W. That means you are charging with 80% more power.
Keep in mind that charging with QC will get your phone a bit warmer, so phone will start to throttle the current, meaning that you won't be charging from 0% to 100% at full 18W
Yes. It charges with 9v and 1,7 amp max. (9v is static, amp is variable, that means it has only QC 2.0 mode.)
Its way faster than standart charger. I have Tronsmart QC 3.0 charger. But you can go with QC 2.0 charger.
does anyone tried to charge Mi 9 with this Baseus charger?
https://www.aliexpress.com/item/32988045731.html?spm=a2g0o.cart.0.0.71f43c00TyHdOp
is this charger compatible with 27W xiaomi charging?
I think it's just Quick Charge 3.0. You should buy the 27W charger imo. But i could be wrong
I have it, it does quick charge but not charge turbo
Good I stopped by XDA before purchasing it.
It does say if you scroll down on its specs it's a QC4 charger, but I assumed the described output would be a sum of both USB ports working simultaneously.
Already posted about it some weeks ago.
https://forum.xda-developers.com/showpost.php?p=79530777&postcount=73
It's indeed just a QC 4.0 charger. Will only do 18W.
Hi, I have one. For it to work properly you have to have the cable of more than 30w.
Load much faster than the original that comes in the box. I did a quick test from 75% to 100% with the phone turned off and charged in 25min; so you can assume if it's fast or not.
WTF ; does this phone even do QC4 ... the Xiaomi offical charger is 3.0 and I bought a $68 dollars Belkin QC : 4.0+ offical as per reviews and it caps out at. 3470 : it NEVER has said fast or TURBO and it ofen Ampere reports 1800 mah ? Can anyone explain this in any way
Do you really have to post the same thing in every single charger related topic ?
Ataemonus said:
Do you really have to post the same thing in every single charger related topic ?
Click to expand...
Click to collapse
I couldn't find this :/
hardtheory said:
I have it, it does quick charge but not charge turbo
Click to expand...
Click to collapse
Thanks for info dude
I suspect that Turbo Charge only happens with the 27W factory charger.
Because my Hama QC4+ charger, certified by Qualcomm, charges definitely faster than the 18W charger found in the package, but does not say Charge Fast or even Charge Turbo.
twojastara-5 said:
does anyone tried to charge Mi 9 with this Baseus charger?
https://www.aliexpress.com/item/32988045731.html?spm=a2g0o.cart.0.0.71f43c00TyHdOp
is this charger compatible with 27W xiaomi charging?
Click to expand...
Click to collapse
Call me crazy but I think it will charge the device at 27W speed.
A lot of people don't seem to realize but the "Xiaomi Turbo Charger 27W" is actually QC3, not QC4+, and it does charge the device at 27W. If you find a QC4+ charger that supports 27W and up, you will still get 27W charging but you won't see "Charge Turbo" because it will use the better, newer charging standard.
This can make charge turbo QC 3.0 and it's cheaper and with more ports:
https://www.banggood.com/AiNaU-3-US...amsung-S8-Letv-Xiaomi6-mi5-mi6-p-1168215.html
lusp00ky said:
This can make charge turbo QC 3.0 and it's cheaper and with more ports:
https://www.banggood.com/AiNaU-3-US...amsung-S8-Letv-Xiaomi6-mi5-mi6-p-1168215.html
Click to expand...
Click to collapse
Yeah but it can only charge at standard QC3 speeds, aka 18W at max. 9V/2A like the original one does. But the original one can also do 12V/1.5A. So it does not "Turbo Charge".
Careful many poster here are confused. My BELKIN true QC4.0+ never ever charged over 3200mA and averaged out at under 2200mA. Posters who speak about things without testing their theories are really frustrating. Do yourself a favor don't believe this phone accepts QC4 or QC 4.0+ (at least not @July 2019) only QC 3.0 NON FAKE xiaomi 27w can do the 4600mA + it would seem. Turbo charging is required for extremely rapid charge times. Make sure you get OFFICIAL 20V 1.35A from Xiaomi for Turbo Charge sustained charge and under one hour 0--100%
I also purchased a QC 4.0+ Hama DC charger cause Xiaomi doesn't make a DC charger to my knowledge. Guess what ; 18w ish charging speeds .. no Fast or Turbo classification ...
XIAOMI Hoe do you call this phone a QC 4.0/4.0+ unit !!! Cause look close at the charger Turbo pictures they are all using the "Original QC 3.0 Xiaomi charger that we ALL should have got in the box. Instead many of us have wasted tonnes of money and time buying useless to us QC 4.0+ tech that doesn't work or WORSE fake chargers that don't do more than 18w !! By the time we we have ordered 3-4 different chargers trying to get it to work we have to order it on Ali or gearbest or Gearvita. Cause the company does make them after all!! Enjoy the brutal shipping fees and heavy wait times. Well we order this and that trying to get the darn thing to work. So annoyed right now
Hi, I got the original charger and this if it gives the turbocharged 27w charge, however the baseus charger charges the same as the one that comes in the box or with the wireless charge.
I made this short video: https://youtu.be/nFBoPxORzEg
https://forum.xda-developers.com/k20-pro/how-to/mi-9t-pro-30w-charger-experiment-t4003595
read this. Also tested with a mi9 that my fried had. same result.( Turbo charging up to 30W using the baseus charger)
Posted for those who end up here like me and read mixed info
I also have the Baseus charger mentioned above (BS-EU906), the variant with 2 usb A ports.
When I charge with the cable from my samsung galaxy tab S5e it charges with a bit over 4200mA 20w-21w.
But when I charge with my Baseus 2m 5a capable cable (CATSS-B0G), it never goes above 3400mA ~14w.
It still chargers fast, but it is not what was advertised. Both the cable and charger are rated for QC3.
Baseus GaN charger 65W + Baseus 5A cable reaches 5000mA in Ampere, which is assuming 5V (that's what Ampere is assuming), equals to 25W. The fact is voltage in QC is never stable, it's the factor that allows it to dynamically supply power based on various parameters: battery temp, device temp, battery capacity and so on. If you have a USB-C USB doctor (and it should be more accurate than any software based monitoring) you can watch yourself that both the voltage and current are alternating constantly.