Hello.
I have some problem with Z5c.
After i Replaced fullset(lcd+digitizer) my phone stopped working. I can charge the battery but when i turn it on, it only tries to boot for a few secconds. After that the red led blinks 4 times and phone restarts again and again. LCD is new and working. I've tried to flash many rom's using many softwares(se-tool, flashtool, xperia companion) but without result. I'm not sure, if it's a software problem.
Does anyone of You solved such issue? Any suggestions, what to do, where to find sollution?
I'd be grateful for any help.
Best Regards.
Olo
olszewek said:
Hello.
I have some problem with Z5c.
After i Replaced fullset(lcd+digitizer) my phone stopped working. I can charge the battery but when i turn it on, it only tries to boot for a few secconds. After that the red led blinks 4 times and phone restarts again and again. LCD is new and working. I've tried to flash many rom's using many softwares(se-tool, flashtool, xperia companion) but without result. I'm not sure, if it's a software problem.
Does anyone of You solved such issue? Any suggestions, what to do, where to find sollution?
I'd be grateful for any help.
Best Regards.
Olo
Click to expand...
Click to collapse
Bonjour avez vous trouvez une solution a* votre probleme, j'ai le meme cas sur 2 Z5 compact de clients, cela fais 3 ecrans que j'ai deja acheter et ne trouve pas de solutions
I this problem help me ?plase
[email protected]
olszewek said:
Hello.
I have some problem with Z5c.
After i Replaced fullset(lcd+digitizer) my phone stopped working. I can charge the battery but when i turn it on, it only tries to boot for a few secconds. After that the red led blinks 4 times and phone restarts again and again. LCD is new and working. I've tried to flash many rom's using many softwares(se-tool, flashtool, xperia companion) but without result. I'm not sure, if it's a software problem.
Does anyone of You solved such issue? Any suggestions, what to do, where to find sollution?
I'd be grateful for any help.
Best Regards.
Olo
Click to expand...
Click to collapse
Hello.Have you solved the problem? I have the same. You wrote that you have a new screen and it works .But how did you test it? I did the following thing: I disconnected the cable connecting the motherboard and display, reassembled the phone and turned it on. He has successfully booted up, I identified the sound from the speakers. Charging the phone went normally and the battery is fully charged soon. I think it's all about low-quality display in my case it is from China, will have to buy a new one. Maybe you have a different solution? Write some. Sincerely.
Related
Hi there.
Sorry about this thread if it has been disscused but I searched here a little and I didn't found something similar to my problem.
I bought my phone last summer in 2010 from Wien , Austria.
I decoded it here in Romania.
3 days ago I upgraded to 2.1...All good , but a few hours ago the phone was charging and someone called me , I answered talked for 10-15 sec then it turned off. I tried to take out battery , sim , memory card for 5-10 min but it didn't turned on , it was only vibrating.I tried to update again but it was only failing.I tried to take out battery etc etc...only vibrating.
Please help me ! Thanks.
Try flashing the stock 2.1 rom if it doesnt worl try the 2.2
Sent from my X10i using XDA Premium App
Thanks for this quick reply.There is one problem : ME .
I'm new to this x10 experience.
Don't have knowledge about cell phones their programs and stuff like that.
I searched a bit on google about flashing and really don't want to f**k this up.
Can you please give me a link or explain how I can do what you wrote above?
Try the power button.
So I downloaded the flash tool read all there but the problem is I can't turn on my phone to see the baseband...
When you try to turn it on does the led just flash red? Mine just did this and the problem is the battery was dead. For some reason it didn't charge while plugged into my laptop. I don't know why, but I had to charge it in my car. Not sure if it has something to do with my battery or from when I flashed/rooted to 2.1 a week ago. Been working fine until today.
The battery is full i just tried to charge it is GREEN and then it turns off just like when it's full.So what can i do about the baseband?
Morti mami lui de telefon !
alexspike said:
Morti mami lui de telefon !
Click to expand...
Click to collapse
Nu fi nervos pe telefon !! Nu el este de vina in cele mai multe cazuri, ci utilizatorul !
Acum ca sa te ajut uite ce trebuie sa faci mai intai verifica daca iti intra in flashmode, daca da atunci =>next da se poate rezolva.
Lasa chestia aia cu flashtool-ul daca nu sti basebandul, poti sa sari peste ea folosind softul original de la SE, SEUS acesta recunoaste automat ce baseband ai si iti downloadeaza firmwareul corect. Insa trebuie sa ii dai repair sa iti instaleze de la 0 tot romul, insa vei pierde toate datele.
daca nu si nici nu porneste=> atunci e de rau si trebuie sa duci telefonul in service, si ori ai stricat bootloaderul sau sa dus ceva hardware, oricum la nici unu nu ai acces deocamdata.
Sorry for that how not understand what i wrote, the men is really pissed off, and try to explain how to solve a solution in the native language.
Mersi sa vad ce rezolv revin cu un PM sau reply.
Does that mean it is fixed?
I have the same problem. My phone just cant start. Only green led and vibro....and black screen.
PROBLEM SOLVED SEUS RULZ ! (seus = sony ericsson update service)
@zeera
Well i just didn't do nothing about flash or something like that i just waited and tried to open it. My battery went red , I charged him all good full battery i plugged usb cable to PC runned update service and finally THE UPDATE WAS A SUCCES !
for 3 days I have been in to hell with everyone because a fu**ing phone ( wich I love )
Thanks all who tried to help me !
Sorry was going to post that but forgot my bad for the delay ;(
Sent from my X10i using XDA Premium App
hey can you explain exactly how you did it step by step?
I have this problem too.
isiena said:
hey can you explain exactly how you did it step by step?
I have this problem too.
Click to expand...
Click to collapse
Well the problem began when the phone was charging , someone called me , i answered , we talked for 10-15 seconds and then the phone turned off. I tried to turn it on but nothing. I didn't tried to flash or something like that instead i tried to install 2.1 again and again with update service from Sony Ericsson. I waited for a few days 2-3 days I guess and tried in these days to update him but was always failing.Yesterday my battery went red , I charged it and updated and it was a succes ! And then i was able to turn it on !
Hope it will be useful for you too.
Hi when the phone wasn't turning on did it connect to the computer at all? [Mine didn't]
Sony Ericsson Update Service
Hi,
Please have a look at the SEUS software for your phone.
http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/updateservice?cc=gb&lc=en
Download this and use it to restore your phone to an original state if something went wrong during an update or it has crashed totally and the phone is unusable. It will work!
If you want to customize your phone and use Flashtool to load a custom rom or firmware onto your device, you will need to have it in a working state to begin with and know which basebad you are running.
how can i update some software from SUES...flash it or do anything....if the phone is not detecting on my computer?
my phone was only vibrating for a sec when i switch it on till past few hours...no red light or green light...
but from past few mins i see red light blinking 3 times when i try to switch it on...and no display...and if i connect a charger(which i did for several hours) and the phone was only blinking red all the time..but there is no charge in the phone...
now there is no vibration but the red light blinks infinitely as i charge my phone...but no display when i turn it on....
is this a known issue? how do i flash it or update the software using SEUS on my phone in this condition?? because the phone wont turn on or detect on my computer... http://media.xda-developers.com/images/icons/icon9.gif
nrmr82 said:
how can i update some software from SUES...flash it or do anything....if the phone is not detecting on my computer?
my phone was only vibrating for a sec when i switch it on till past few hours...no red light or green light...
but from past few mins i see red light blinking 3 times when i try to switch it on...and no display...and if i connect a charger(which i did for several hours) and the phone was only blinking red all the time..but there is no charge in the phone...
now there is no vibration but the red light blinks infinitely as i charge my phone...but no display when i turn it on....
is this a known issue? how do i flash it or update the software using SEUS on my phone in this condition?? because the phone wont turn on or detect on my computer... http://media.xda-developers.com/images/icons/icon9.gif
Click to expand...
Click to collapse
My x10 has done this before, it does it when you drain you battery below a certain voltage, which is too low for the phone to begin charging it again. You could try putting your battery in a dock to charge it. All i did was cut the end off a usb cable, stripped the positive and negative wires and just held them against the batteries terminals for ten minutes white the other end of the cable was plugged into the computer. Put the battery back in my phone and it had 20% charge.
Hello, so this problem really started randomly, doesn't matter what I do, lets say I type a message my Lumia's screen is completely not responding like its dead, the search, windows or back keys, don't work either, but I can lock the phone, when I lock it and unlock it, everything is fine for some time, then again, I did a soft reset to check if there were no apps running that might have been stuck, nothing worked, then I actually did a hard reset, which helped for like 10 minutes and then the problem was there again... I am using Windows Phone 7.8, I don't know if that could be the problem, because I've been using it for few days and the problem came up only today, so, if anyone could help I would be really thankful, because the problem is really annoying.
Archanor said:
Hello, so this problem really started randomly, doesn't matter what I do, lets say I type a message my Lumia's screen is completely not responding like its dead, the search, windows or back keys, don't work either, but I can lock the phone, when I lock it and unlock it, everything is fine for some time, then again, I did a soft reset to check if there were no apps running that might have been stuck, nothing worked, then I actually did a hard reset, which helped for like 10 minutes and then the problem was there again... I am using Windows Phone 7.8, I don't know if that could be the problem, because I've been using it for few days and the problem came up only today, so, if anyone could help I would be really thankful, because the problem is really annoying.
Click to expand...
Click to collapse
eu estava com o mesmo problema que você voltei para a 7.5, e esta tudo bem agora.
davifs said:
eu estava com o mesmo problema que você voltei para a 7.5, e esta tudo bem agora.
Click to expand...
Click to collapse
This forum have only one language. English. Please, respect this fact.
I know its weird, but everythings alright now, I just kept the phone off for the night and in the morning, ta-da!
The thread can be closed.
Hi all,
Yesterday I completely drain my battery on my Desire X.
I've recharged it but ... the led still orange (no green as fully recharged) and the phone doesn't boot ... the screen still black ... no vital signs.
If I connect phone to battery recharge, the led become orange ... but the behavior still the same ... black screen and no vital signs.
I've tried with VOL DOWN+POWER but nothing happens ... no recovery screen, only a black screen.
Could anyone help me? Is my phone dead?
Thanks in advance
SR
sreggy said:
Hi all,
Yesterday I completely drain my battery on my Desire X.
I've recharged it but ... the led still orange (no green as fully recharged) and the phone doesn't boot ... the screen still black ... no vital signs.
If I connect phone to battery recharge, the led become orange ... but the behavior still the same ... black screen and no vital signs.
I've tried with VOL DOWN+POWER but nothing happens ... no recovery screen, only a black screen.
Could anyone help me? Is my phone dead?
Thanks in advance
SR
Click to expand...
Click to collapse
If your bootloader is bricked, you can only go to a service.
xpirt
xpirt said:
If your bootloader is bricked, you can only go to a service.
xpirt
Click to expand...
Click to collapse
Thanks a lot xpirit.
I haven't installed any custom Rom, there is the original one. I've bought the phone in Germany because I was not able to find it in Italy so the Rom is branded T-Mobile.
Could my bootloader be bricked without any action on Rom or phone (it is not rooted)?
Thanks again
SR
sreggy said:
Thanks a lot xpirit.
I haven't installed any custom Rom, there is the original one. I've bought the phone in Germany because I was not able to find it in Italy so the Rom is branded T-Mobile.
Could my bootloader be bricked without any action on Rom or phone (it is not rooted)?
Thanks again
SR
Click to expand...
Click to collapse
If you are on stock maybe is a problem hardware-side.
OT: lol possiamo parlare anche in italiano allora cmq anke io l'ho comprato in germania perchè non esiste neancora in italia penso..
xpirt
Try with another battery... Your battery can't start the phone, and it can't accept charge because you can't boot to android or recovery...
Flowed from my HTC branded muffin...
Stereo8 said:
Try with another battery... Your battery can't start the phone, and it can't accept charge because you can't boot to android or recovery...
Flowed from my HTC branded muffin...
Click to expand...
Click to collapse
Hi,
I've tryed to boot without battery plugged to the recharge ... the orange led still on but nothing happen.
I've no another HTC battery ... could I try connecting + and - to another battery for example a Samsung one ... both are 3.6V and mAh are more then 1650 of the HTC battery?
Thanks again
SR
Hello,
I have a Samsung galaxy S3 I9300.
I had a couple problems with my Phone. Camera not working, boot loops, stuck on bootanimation. All of these problems are fixed.
But now the big problems are beginning.
When I turn on the Phone I see the samsung s3 logo over and over again (boot loop). But when I put the Phone on the charger or usb it boot normally.
And when my Phone is running (on charger or usb), It can't connect to the network and I see red and green stripes in the screen.
So my Phone can only run on a charger, because when i take of the charger, the Phone turns off and restart with the bootloop.
I have tried another good battery, but it didn't work.
I tried to install custom kernels etc. but everything is back to stock now.
Can somebody help??
Kind regards,
Casper
P.S.: Sorry for bad English, I come from the Netherlands.
@casperlutt: hi casper, Hollanders praten meestal prima engels, toch?
If you've installed the right actual firmware for your phone, it's the hardware. Maybe battery: it's only good, if it works satisfying in another phone. Further USB-socket: cheap to repair. Or display/mainboard: repair IMHO not very efficient for this old lady.
Hello,
Thanks for helping me, i really appreciate that.
I have the problems fixed, but now i have a problem with a bad IMEI number.
I have no backup of the IMEI. Is there any way to repair this without paying for this?
Kind regards,
Casper
I THINK......
casperlutt said:
Hello,
Thanks for helping me, i really appreciate that.
I have the problems fixed, but now i have a problem with a bad IMEI number.
I have no backup of the IMEI. Is there any way to repair this without paying for this?
Kind regards,
Casper
Click to expand...
Click to collapse
I think you may have used a bad software version!!
Please find your software here!!
Samsung ODIN Service Files
Then Flash using Odin3:
Odin v3.10.zip
And finally "Select" these Checkboxes!
Auto-Reboot
F.Reset Time
Phone Bootloader update
Phone EFS Clear
This should Fix you right UP!!
I got a P9000 in the late spring, and have been really happy with it. Unfortunately I dropped it on the ground, and the screen cracked, after which the touch function did not work (but the phone did) I finally managed to get a new screen from China, and it has been installed by a local shop dealing with mobiles. However, the shop told me they could/would not deal with anything else but changing the LCD screen. The phone switches on (I can hear starting jingles and emails downloading etc) but the screen just turns from black to dark blue and stays that way. I have been trawling through the forums, but not sure what to do next. Take it that I need to flash it, and have followed the instructions given here, but it just seems to time out. Anyone got the patience to walk me through this?
UKrugger said:
I got a P9000 in the late spring, and have been really happy with it. Unfortunately I dropped it on the ground, and the screen cracked, after which the touch function did not work (but the phone did) I finally managed to get a new screen from China, and it has been installed by a local shop dealing with mobiles. However, the shop told me they could/would not deal with anything else but changing the LCD screen. The phone switches on (I can hear starting jingles and emails downloading etc) but the screen just turns from black to dark blue and stays that way. I have been trawling through the forums, but not sure what to do next. Take it that I need to flash it, and have followed the instructions given here, but it just seems to time out. Anyone got the patience to walk me through this?
Click to expand...
Click to collapse
I am facing same thing here. The screen is not coming up at all, But I can hear sound too. ANyone else who has changed the screen successfully before?
yes, i changed the screen successfully. After screen replacement i flashed the newest rom with flashtools and all was ok.
DonMagnifico said:
yes, i changed the screen successfully. After screen replacement i flashed the newest rom with flashtools and all was ok.
Click to expand...
Click to collapse
Can you describe the precise process you followed. I seem to get stuck when I try to flash the phone
UKrugger said:
Can you describe the precise process you followed. I seem to get stuck when I try to flash the phone
Click to expand...
Click to collapse
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
change screen start logo screen after light on/off all the time 2sec
DonMagnifico said:
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
Click to expand...
Click to collapse
hello, thank you for you help. i've change the screen p9000 and when i put battery the screen logo elephone turns on and turns off two second always.is it normal and is it essential new flash when you put a new screen. in periph manager i see two second USB Vcom MT 65xx preloader but it's disapear 2seconde all the time because logo elephone light on and off two second. If you give me a solution, you are the best.
the pc don't recognize telephone of course. but i'm tm trying your methode but i've meet difficult with install pilot.
thank you XDA
thank you to help me, all the day i'm trying solutions,after the screen change, Flashtool tell sucess download, but it continues to turn on and off with the logo elephone starts. in peripheral it appears and disappears every two seconds. i don't know if there is a room in my phone. how to inject the files in the phone with a Peripheric always on and off. help me please. after flashtool ok download the screenis black and nothing i move battery and after logo elephone on/off but nothing else. someone know the reason on/off and appear an desappear in device : Mt65xx USBVCOM.
tanguy66 said:
hello, thank you for you help. i've change the screen p9000 and when i put battery the screen logo elephone turns on and turns off two second always.is it normal and is it essential new flash when you put a new screen. in periph manager i see two second USB Vcom MT 65xx preloader but it's disapear 2seconde all the time because logo elephone light on and off two second. If you give me a solution, you are the best.
the pc don't recognize telephone of course. but i'm tm trying your methode but i've meet difficult with install pilot.
thank you XDA
Click to expand...
Click to collapse
You are in a boot loop. This is not a bad sign, now you know the screen works. It's normal that you have to flash the Rom again after replacing the screen. if you use flashtool, start download in flashtools before you connect your phone to the PC, then hold vol+ on your P9000 and connect the phone to the pc.
DonMagnifico said:
You are in a boot loop. This is not a bad sign, now you know the screen works. It's normal that you have to flash the Rom again after replacing the screen. if you use flashtool, start download in flashtools before you connect your phone to the PC, then hold vol+ on your P9000 and connect the phone to the pc.
Click to expand...
Click to collapse
always the same problem: light on off all 2 seconds, with B+vol+ i see recovery 1 seconde. i haven't the time to do something. question is it possible the battery bad, the logo flash all the time if the battery bad the logo don't go isn't it. please help i'm trying plenty solution but no good . thank you.
tanguy66 said:
always the same problem: light on off all 2 seconds, with B+vol+ i see recovery 1 seconde. i haven't the time to do something. question is it possible the battery bad, the logo flash all the time if the battery bad the logo don't go isn't it. please help i'm trying plenty solution but no good . thank you.
Click to expand...
Click to collapse
no, it's not the battery. You made a mistake by flashing the rom, now you are in a boot loop. Ignore the message on the screen. Try to flash the rom again. start flashtool, select the scattertext, click download, hold vol+ button on the phone and connect the phone to the PC
PLEASE HELP me, can you give me a solution to start up the phone again
hello , before flash tool all is ok flashing GOOD, now it's more bad now i have no lignt no logo, and when use flash tool always stop download 20% BROM error: status dowwnload exeption (0xc0050003) (HINT) : , i don't know if i have a good battery
yesterday i have a new image appears it'a big beautiful battery only one bar after logo several times. i'm found an d try all solutions, 4 days , i sleep at 1 oclock. help to find a solution. how to know or test if the telephone is dead or little life.
OK now i arrived with flash tool i begin all zero, and message OK Good, i'm verry worried, no light , no logo??have you a solution to know if the battery now? thank you help.
do you know when the message tell OK,it means all things an room is now ok in the phone. I'm not sure
just now i'm testing battery with tester 3v 1ma it's good. how to do to light screen now. it's strange.
and with electric power it must work normaly ,or not if the battery dead?
i think you flashef the wrong preloader. flash the phone again with the newest firmware. in #5 you find a link to the needed files.
DonMagnifico said:
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
Click to expand...
Click to collapse
After a couple of tries, I did manage to get this working. Initial failure seemed to be me not pressing the "Vol +" button. Thanks very much for your help
DonMagnifico said:
i think you flashef the wrong preloader. flash the phone again with the newest firmware. in #5 you find a link to the needed files.
Click to expand...
Click to collapse
thank you. i use flash tool v5.1620. i have windows 7 32 bit,mtk 65 vcom is update, i'm not sure what do you mean. newest firmware. i have last room for p9000. can you tell more details please or more link to succeed. i read, and i trying a lot, now i swimming again.
UKrugger said:
After a couple of tries, I did manage to get this working. Initial failure seemed to be me not pressing the "Vol +" button. Thanks very much for your help
Click to expand...
Click to collapse
ok , i don't understand with flash tool i have plenty of time a big download is ok, if the download is ok why it's doesn't working.
the phone is often remains dark. I put in charge the battery with two 2mn special machine at my work , and it's wake up the phone souddenly appears again the elephone logo and battery with 1 once bar, I don't know if it's me or the battery or something else. normally if I plug in USB i must have lignt Electric power? but nothing.
thank you and not let me down please i need you.
tanguy66 said:
ok , i don't understand with flash tool i have plenty of time a big download is ok, if the download is ok why it's doesn't working.
the phone is often remains dark. I put in charge the battery with two 2mn special machine at my work , and it's wake up the phone souddenly appears again the elephone logo and battery with 1 once bar, I don't know if it's me or the battery or something else. normally if I plug in USB i must have lignt Electric power? but nothing.
thank you and not let me down please i need you.
Click to expand...
Click to collapse
Sorry, I can' t help you more. All I know i telled you. But write a private message to skeleton1911, he has a great experience in reactivating Phones. May be he can help you.
P9000 screen replacement
Hi . I had my p9000 about 2 months when I sat on it and cracked the screen,the casing was very slightly curved so I gave it to a shop to repair,now nearly 2 months later they say they can't get it to start up. They tried a new battery and I told them what I'd read on this forum regarding flahing the rom but They gave me back the phone with a new screen and nothing else, so I told them i'm not paying for 1/2 a repair and told them to remove the new screen and give me back the phone as it was . What do you think could be the problem if a repair shop cannot repair a screen and install new sorftware is there hope for it?
Hi, i broked my screen again so i am not a newbie about this... but this time after flashing the Phone show nothing at all... the small LED Dot is shining when android is boot, so i dont think the cable is connected wrong. The touch works fine..What can it be??