Related
I have been looking through the posts here and on other sites, and I cannot seem to find anyone with experience of rooting the Blackview A8
I have tried using the Kingo Root phone app and their PC software application, which did not work and left a number of other applications installed.
I want to root the A8 in order to be able to use ES File Explorer and StickMount to download photos direct to USB sticks.
If anyone has any suggestions to help with this they will be very gratefully received.
Bump ...
The processor is a Mediatek 6580A, in case anyone has rooted another device with this processor...
Full specs for the Blackview A8 on devicespecifications.com - I cannot post the Url at present
The device has the possibility of USB OTG, but does not connect to any device I have tried, and the USB OTG Checker App tells me that the API is installed, but no USB OTG in the Kernel.
Dropbox works fine as a backup/ transfer method, but I want to be able to use USB Sticks for when I am not on WiFi/ Network...
bump... need root for blackview a8 too
Rooting Blackview A8
segaodma said:
bump... need root for blackview a8 too
Click to expand...
Click to collapse
I have successfully rooted my Blackview Y806 A8 phone. I flashed a TWRP recovery first and then manually flashed the supersu zip. I will try to find time to write more detailed instructions asap.
mrgadgetuk said:
I have successfully rooted my Blackview Y806 A8 phone. I flashed a TWRP recovery first and then manually flashed the supersu zip. I will try to find time to write more detailed instructions asap.
Click to expand...
Click to collapse
Will also wait for files and procedure. Thanks.
---------- Post added at 08:38 PM ---------- Previous post was at 08:30 PM ----------
If it can help...
https://www.dealabs.com/bons-plans/...m-2050mah-double-sim--/256438?comment=4381794
Rooting A8
solid.snake said:
Will also wait for files and procedure. Thanks.
---------- Post added at 08:38 PM ---------- Previous post was at 08:30 PM ----------
If it can help...
https://www.dealabs.com/bons-plans/...m-2050mah-double-sim--/256438?comment=4381794
Click to expand...
Click to collapse
I have the TWRP recovery img and the supersu zip file. Does anybody know whether I'm allowed to upload these files directly to this website? And or put links to other websites relating to rooting the A8? One more thing. I believe there are two types of A8s. The Y806 and the Y813. I have the Y806 but my son has the Y813. There is a way of telling them apart. I will make a start on the instructions once someone confirms whether I can proceed.
mrgadgetuk said:
I have the TWRP recovery img and the supersu zip file. Does anybody know whether I'm allowed to upload these files directly to this website? And or put links to other websites relating to rooting the A8? One more thing. I believe there are two types of A8s. The Y806 and the Y813. I have the Y806 but my son has the Y813. There is a way of telling them apart. I will make a start on the instructions once someone confirms whether I can proceed.
Click to expand...
Click to collapse
Never mind, upload it.
How to make the difference between both A8?
Rooting A8 Instructions
First you need to download the correct Stock ROM for your device:
THIS IS FOR THE Y806 VERSION:
http://bbs.blackview.hk/viewtopic.php?f=136&t=57766
THIS IS FOR THE Y813 VERSION:
http://bbs.blackview.hk/viewtopic.php?f=136&t=32613 (THIS ALSO SHOWS YOU HOW TO IDENTIFY YOUR DEVICE.)
1. Download and extract (to a place where you can easily find it again) one of these ZIPs.
2. Rename the ‘recovery.img’ file inside, ‘recovery2’. Download the ‘A8 recovery.img’ from here https://mega.nz/#!PoJ3gJLA!-xm4X6AzmzsWl5LgQm2gFKaxr-yIC2B492LW4ucVWGY and copy it into the above extracted folder and rename it ‘recovery’ (without the inverted commas).
3. Here http://www.needrom.com/download/blackview-a8/ you will see ‘Flashtools’ about a quarter of the way down the page. Click on it and download will begin of Pack-Flashtool-v5.1604.00.000.
4. Unpack FlashTools. (There is a folder inside named ‘Driver’ if it’s required) and click on Flash_tool.exe inside the folder called SP_Flash_Tool_exe_Windows_v5.1604.00.000.
5. Select "scatter-Loading" and search for MT6580_Android_scatter.txt in the extracted ROM above and wait for the files to be added into Flash Tool.
6. Un-tick/unselect all, EXCEPT ‘recovery’.
7. Select "Download only".
8. Turn off your phone, remove the battery (if the battery is removable) and replace it after some seconds (and don't turn on the phone).
9. Press the “Download” button to start and then connect your phone into the computer via USB data cable.
10. The process will start (If it doesn’t start after 5 seconds or so, unplug the cable and plug it back in).
11. A green circle with a tick will be displayed signifying it’s finished!
12. You can now safely disconnect your phone and turn it on.
FLASHING SuperSu.zip
1. Copy the SuperSu.zip file to your SD Card.
2. Reboot your phone into the new TWRP Recovery
3. Select ‘Install’ and locate the SuperSu.zip file and select ‘Install Image’.
4. After flashing has completed, reboot your phone and you will finally have root.
I BELIEVE I HAVE INCLUDED ALL THE INSTRUCTIONS. IF I’VE MISSED ANYTHING, LET ME KNOW AND I WILL TRY TO REPLY ASAP.
I’VE ALSO ATTACHED SOME IMAGES PROVING THAT MY A8 HAS BEEN ROOTED.
P.S. I’M NOT RESPONSIBLE IF YOU BRICK YOUR PHONE ACCIDENTALLY. SO READ INSTRUCTIONS CAREFULLY.
My phone has no white sticker, but a black sticker the size of the small white one. Would that be the y814?
Then it's a Y813
Here :
Y813 :
Y806 :
mrgadgetuk said:
First you need to download the correct Stock ROM for your device:
THIS IS FOR THE Y806 VERSION:
http://bbs.blackview.hk/viewtopic.php?f=136&t=57766
THIS IS FOR THE Y813 VERSION:
http://bbs.blackview.hk/viewtopic.php?f=136&t=32613 (THIS ALSO SHOWS YOU HOW TO IDENTIFY YOUR DEVICE.)
1. Download and extract (to a place where you can easily find it again) one of these ZIPs.
2. Rename the ‘recovery.img’ file inside, ‘recovery2’. Download the ‘A8 recovery.img’ from here https://mega.nz/#!PoJ3gJLA!-xm4X6AzmzsWl5LgQm2gFKaxr-yIC2B492LW4ucVWGY and copy it into the above extracted folder and rename it ‘recovery’ (without the inverted commas).
3. Here http://www.needrom.com/download/blackview-a8/ you will see ‘Flashtools’ about a quarter of the way down the page. Click on it and download will begin of Pack-Flashtool-v5.1604.00.000.
4. Unpack FlashTools. (There is a folder inside named ‘Driver’ if it’s required) and click on Flash_tool.exe inside the folder called SP_Flash_Tool_exe_Windows_v5.1604.00.000.
5. Select "scatter-Loading" and search for MT6580_Android_scatter.txt in the extracted ROM above and wait for the files to be added into Flash Tool.
6. Un-tick/unselect all, EXCEPT ‘recovery’.
7. Select "Download only".
8. Turn off your phone, remove the battery (if the battery is removable) and replace it after some seconds (and don't turn on the phone).
9. Press the “Download” button to start and then connect your phone into the computer via USB data cable.
10. The process will start (If it doesn’t start after 5 seconds or so, unplug the cable and plug it back in).
11. A green circle with a tick will be displayed signifying it’s finished!
12. You can now safely disconnect your phone and turn it on.
FLASHING SuperSu.zip
1. Copy the SuperSu.zip file to your SD Card.
2. Reboot your phone into the new TWRP Recovery
3. Select ‘Install’ and locate the SuperSu.zip file and select ‘Install Image’.
4. After flashing has completed, reboot your phone and you will finally have root.
I BELIEVE I HAVE INCLUDED ALL THE INSTRUCTIONS. IF I’VE MISSED ANYTHING, LET ME KNOW AND I WILL TRY TO REPLY ASAP.
I’VE ALSO ATTACHED SOME IMAGES PROVING THAT MY A8 HAS BEEN ROOTED.
P.S. I’M NOT RESPONSIBLE IF YOU BRICK YOUR PHONE ACCIDENTALLY. SO READ INSTRUCTIONS CAREFULLY.
Click to expand...
Click to collapse
The MEGA link always give me download failed even I have a stable wifi connection. Any other miror on y813 stock rom link?
The Mega account for the ROMs isn't mine. It belongs to Blackview.hk
Edit:
Silly me... I was holding wrong keys for the start menu... thank you, it works!
Whoever you are... I owe you a beer!
Old message:
I did all from the tutorial (I have a black Y813). It finds the phone when I connect it to the USB, says all OK. But when I try to boot into TWRP (holding Volume- and Reset button) it still boots in the original factory Chinese boot mode. No TWRP mode.
Works! Works! Works!
Okay, now I have root. So far understood.
What have I to do if I would like to renew the total system. In may case the Android system has several adware included. I wish to change the rom against a "clean" system.
wollilolli said:
Okay, now I have root. So far understood.
What have I to do if I would like to renew the total system. In may case the Android system has several adware included. I wish to change the rom against a "clean" system.
Click to expand...
Click to collapse
I solved it myself. I have flashed the whole downloaded y806 file and checked all items in flashtool to be flashed. After a longer boot duration the system works great and ....without adware. Great!!
---------- Post added at 10:52 AM ---------- Previous post was at 10:46 AM ----------
segaodma said:
Edit:
Silly me... I was holding wrong keys for the start menu... thank you, it works!
Whoever you are... I owe you a beer!
Old message:
I did all from the tutorial (I have a black Y813). It finds the phone when I connect it to the USB, says all OK. But when I try to boot into TWRP (holding Volume- and Reset button) it still boots in the original factory Chinese boot mode. No TWRP mode.
Works! Works! Works!
Click to expand...
Click to collapse
Hi, but which keys are the valid ones?
Guys, do you got problems with A8's battery?
Is there a connection between rooting of A8 and decreasing A8's high phone idle?
Hey guys! I'm about to root my Blackview A8 using the method mentioned in this thread. How is everyone's experience with this? Is rooting my phone using the above-posted method completely safe?
I'll recommend this
mrgadgetuk said:
First you need to download the correct Stock ROM for your device:
THIS IS FOR THE Y806 VERSION:
THIS IS FOR THE Y813 VERSION:
] (THIS ALSO SHOWS YOU HOW TO IDENTIFY YOUR DEVICE.)
1. Download and extract (to a place where you can easily find it again) one of these ZIPs.
2. Rename the ‘recovery.img’ file inside, ‘recovery2’. Download the ‘A8 recovery.img’ from here and copy it into the above extracted folder and rename it ‘recovery’ (without the inverted commas).
3. Here you will see ‘Flashtools’ about a quarter of the way down the page. Click on it and download will begin of Pack-Flashtool-v5.1604.00.000.
4. Unpack FlashTools. (There is a folder inside named ‘Driver’ if it’s required) and click on Flash_tool.exe inside the folder called SP_Flash_Tool_exe_Windows_v5.1604.00.000.
5. Select "scatter-Loading" and search for MT6580_Android_scatter.txt in the extracted ROM above and wait for the files to be added into Flash Tool.
6. Un-tick/unselect all, EXCEPT ‘recovery’.
7. Select "Download only".
8. Turn off your phone, remove the battery (if the battery is removable) and replace it after some seconds (and don't turn on the phone).
9. Press the “Download” button to start and then connect your phone into the computer via USB data cable.
10. The process will start (If it doesn’t start after 5 seconds or so, unplug the cable and plug it back in).
11. A green circle with a tick will be displayed signifying it’s finished!
12. You can now safely disconnect your phone and turn it on.
FLASHING SuperSu.zip
1. Copy the SuperSu.zip file to your SD Card.
2. Reboot your phone into the new TWRP Recovery
3. Select ‘Install’ and locate the SuperSu.zip file and select ‘Install Image’.
4. After flashing has completed, reboot your phone and you will finally have root.
I BELIEVE I HAVE INCLUDED ALL THE INSTRUCTIONS. IF I’VE MISSED ANYTHING, LET ME KNOW AND I WILL TRY TO REPLY ASAP.
I’VE ALSO ATTACHED SOME IMAGES PROVING THAT MY A8 HAS BEEN ROOTED.
P.S. I’M NOT RESPONSIBLE IF YOU BRICK YOUR PHONE ACCIDENTALLY. SO READ INSTRUCTIONS CAREFULLY.
Click to expand...
Click to collapse
I'm really thanks with you, this really worked and I recommend this process (I've a Y806) But you missed something. To install the drivers of the FlashTools you have to disable the obligatory use of signed drivers before to install it (If you don't have disable, The installation won't finish) Thanks
Hi. I've managed the first part of the process, up until receiving the green tick and copying the SuperSU.zip to the memory card on my A8. The problem comes when I want to go into TWRP: I manually enter recovery mode and I get a dead android icon with the line "no command".
Any ideas would be greatly appreciated.
John
Hi All,
Really annoying self inflicted problem, changed the swipe code, forgot it, google account ADM wont reset phone, no sequence of button pressing gets phone into recovery mode, USB debugging appears to be off. How can I save my phone??!??!?!?!? What sequence should I follow, what ROM should I install, need a step by step if at all possible, complete newbie!!1? Thanks in advance.
Jacko110 said:
Hi All,
Really annoying self inflicted problem, changed the swipe code, forgot it, google account ADM wont reset phone, no sequence of button pressing gets phone into recovery mode, USB debugging appears to be off. How can I save my phone??!??!?!?!? What sequence should I follow, what ROM should I install, need a step by step if at all possible, complete newbie!!1? Thanks in advance.
Click to expand...
Click to collapse
ok you are most likely on 20160810 where recovery does not work.
you are most likely on windows 10 as well. first lets find a rom where recovery works.
We can use 20160810 rom and wipe userdata partition..
Here is the download link https://mega.nz/#!ys4DTIxa!8rrL0aktVQ8W7Q4Et8fvQ8jk2tAxLZvJOJH48S9Vkyk .
Once you have finished downloading you should then extract it to a folder.
Next we need to prepare your computer for the flashing process by installing the correct drivers.
look in this thread http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042 scroll for your version of windows. follow the instructions and everything should work.
If you dont have add hardware option in windows then hit windows button and r and enter hdwwiz.exe.
now you have installed the drivers we need to download sp flash tools which is what we need to install the rom.
So go this website http://spflashtool.com/ now click on the first download link 'SPFlash Tool 5.1628' .
this will download a zip file. again extract it to a new folder. ok now you need to go in the flash tool and run flash_tool.exe by just clicking on it. now the software will load up.
You need to load the scatter file from the rom folder. The scatter file should be outside the encrypt folder and should be called MT6755_Android_scatter.txt . Now the rom should be loaded. You have some more options here, you can either untick all boxes and leave userdata (where your security and codes are stored) ticked or you can leave everything ticked which would flash the rom again. So once you have decided what option you have you need to turn your phone off. you then need to click download in flash tools and then connect your phone to the pc and hold the vol+ button. Then wait for it to flash, once the box with the tick opens you can close the program and restart your phone.
no recovery
there is no recovery in this build.........you have to flash one of your own.....
No recovery
Thank you, will start trying now and let you know.
Success!
Pro4TLZZ said:
ok you are most likely on 20160810 where recovery does not work.
you are most likely on windows 10 as well. first lets find a rom where recovery works.
We can use 20160810 rom and wipe userdata partition..
Here is the download link https://mega.nz/#!ys4DTIxa!8rrL0aktVQ8W7Q4Et8fvQ8jk2tAxLZvJOJH48S9Vkyk .
Once you have finished downloading you should then extract it to a folder.
Next we need to prepare your computer for the flashing process by installing the correct drivers.
look in this thread http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042 scroll for your version of windows. follow the instructions and everything should work.
If you dont have add hardware option in windows then hit windows button and r and enter hdwwiz.exe.
now you have installed the drivers we need to download sp flash tools which is what we need to install the rom.
So go this website http://spflashtool.com/ now click on the first download link 'SPFlash Tool 5.1628' .
this will download a zip file. again extract it to a new folder. ok now you need to go in the flash tool and run flash_tool.exe by just clicking on it. now the software will load up.
You need to load the scatter file from the rom folder. The scatter file should be outside the encrypt folder and should be called MT6755_Android_scatter.txt . Now the rom should be loaded. You have some more options here, you can either untick all boxes and leave userdata (where your security and codes are stored) ticked or you can leave everything ticked which would flash the rom again. So once you have decided what option you have you need to turn your phone off. you then need to click download in flash tools and then connect your phone to the pc and hold the vol+ button. Then wait for it to flash, once the box with the tick opens you can close the program and restart your phone.
Click to expand...
Click to collapse
Thank you soo much, all sorted. Take it that I can now use these tools and newly gained knowledge to upgrade OS???
Jacko110 said:
Thank you soo much, all sorted. Take it that I can now use these tools and newly gained knowledge to upgrade OS???
Click to expand...
Click to collapse
You can but be careful as you could damage your phone
Has anyone got a link to a custom recovery I can flash on to p9000 running latest ROM
haidar123 said:
Has anyone got a link to a custom recovery I can flash on to p9000 running latest ROM
Click to expand...
Click to collapse
http://forum.xda-developers.com/ele...nofficial-twrp-elephone-p9000-t3426678/page11 use a p9000 scatter file
Hi,
I have the same problem with my P9000 : Elephone_P9000_20160810, I even cannot install the last update 20170112 because the recovery mode is not working. but I use Linux mint on my laptop.
I already downloaded the Linux version of the flashing tool, give it a try but at the time of the flashing my laptop freeze. Scarred to death, I restarted my phone, no damage done, but now, after stay away from the idea the time to recover from my post traumatic syndrome disorder, I am ready to try again with the help of peoples knows what they are doing.
What are the points I have to be aware using Linux mint when I follow this tutorial.
Thanks for your time
New Recovery File
Need to use this one. I had the same problems https://redirect.viglink.com/?format=go&jsonp=vglnk_148541845062211&key=f0a7f91912ae2b52e0700f73990eb321&libId=iye3se1601000n4o000DA1jol7bnvwro0d&loc=https%3A%2F%2Fforum.xda-developers.com%2Fsitesearch.php%3Fq%3Dp9000%2520twrp%2520unofficial&v=1&out=https%3A%2F%2Fwww.google.com%2Furl%3Fq%3Dhttps%3A%2F%2Fforum.xda-developers.com%2Felephone-p9000%2Fdevelopment%2Frecovery-unofficial-twrp-elephone-p9000-t3426678%26sa%3DU%26ved%3D0ahUKEwiR2N_0rt_RAhUF5xoKHQaCAEUQFggEMAA%26client%3Dinternal-uds-cse%26usg%3DAFQjCNEDufTDo_BhHEYeYoUxe8gtq12xsw&title=General%20Search&txt=%5BRECOVERY%5D%20%3Cb%3EUnofficial%20TWRP%3C%2Fb%3E%20for%20Elephone%20%3Cb%3EP9000%3C%2Fb%3E%203.0.2-8
As someone who has done this a few times - and forgotten this vital step almost every time, just a reminder that when using SPFlash Tool - after you set up the scatter file, you click on download so that it is trying to communicate with the phone before you even plug the cable into the phone, then with your phone turned off you hold Vol+ as you plug in the cable. It should send the file almost instantly.
hi guys
i have a problem
when i want to unlock my bootloader with this method
http://en.miui.com/thread-253680-1-1.html
i got this error 0x80070026 receiving Hello Packet error
my device bootloader id locked and i want to unlock it without permission from miui
how can i fix this error
every things in my pc is ok
the drivers is installed succesfuly-my windows is 7 x64
i can go to edl
and try 2 version of mi flash(2015 - 2016)
:crying::crying::crying::crying:
and second question. how long does it take to I receive the permission form the miui in official method of unlocking bootloader
sorry for my bad english:good:
booshveg said:
hi guys
i have a problem
when i want to unlock my bootloader with this method
http://en.miui.com/thread-253680-1-1.html
i got this error 0x80070026 receiving Hello Packet error
my device bootloader id locked and i want to unlock it without permission from miui
how can i fix this error
every things in my pc is ok
the drivers is installed succesfuly-my windows is 7 x64
i can go to edl
and try 2 version of mi flash(2015 - 2016)
:crying::crying::crying::crying:
and second question. how long does it take to I receive the permission form the miui in official method of unlocking bootloader
sorry for my bad english:good:
Click to expand...
Click to collapse
It happened to me too. Tried many version of mi flash but it says error once hello packet and once not enough memory.
I was not able to boot up. I once again tried it.
Opened PC booted into edl mode. Flashed the ROM by proper settings by mi flash. It again showed error. Not enough memory. But this time I didn't turn my phone off. I straightly ran unlock bootloader.bat file and then flash twrp. Bat file. It worked and my phone rebooted into twrp. I wiped all data except microsd and flashed cm13 official because j need to boot up atleast. And now using it like charm flashing and installing any ROM of my choice
---------- Post added at 07:05 PM ---------- Previous post was at 07:01 PM ----------
This for other problem but may help you.
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
Yes even I got the same error when flashing fastboot ROM.. tried with older version of miflash... success... then use the batch files provided in the above post... everything will be fine..
One problem though fingerprint isn't working after flashing RR or any other custom ROM..
Hi! I need help to unlock my Vodafone Smart Turbo 7 (VFD-500), is locked on Vodafone Romania. I found some tools like Furiousgold, NCK Dongle, Otsmart for unlock carrier, but i dont know why not running on my pc, i dont know what drivers i need for this phone. Please help!
vfd simlock
Download the vdf 500 firmware you can find it at firmwarefiles .com . The file from the site has all the tools including the firmware.
1. Extract the zip.
2. Install the drivers.
3. Open start SP Flashtool.
4. From flashtool locate scatter file.
5. From download options select ,,format all + download.
6. Press download, connect device.
7. Disconnect the device immediately after formatting completes, before the download starts.
8. From download options select Download, then unchecked "Simlock" .
9. Press download and connect device.
You're done. Please thank me
Crack-roach said:
Download the vdf 500 firmware you can find it at firmwarefiles .com . The file from the site has all the tools including the firmware.
1. Extract the zip.
2. Install the drivers.
3. Open start SP Flashtool.
4. From flashtool locate scatter file.
5. From download options select ,,format all + download.
6. Press download, connect device.
7. Disconnect the device immediately after formatting completes, before the download starts.
8. From download options select Download, then unchecked "Simlock" .
9. Press download and connect device.
You're done. Please thank me
Click to expand...
Click to collapse
I had a chance to get my hands on this "crappy" piece of device , helping some friend ... so ,
i've tried your tutorial and the phone was stuck in a loop (loading circle ... ) , so i've tried modding the simlock file which worked :fingers-crossed: !
I have used this firmware (click after creating account and login on that website , post link here)(MT6735M_S00_EMMC_Vodafone_VFD 500_6_0_alps-mp-m0_mp1-V2_39_1_jhz6735m_35u_vf_m_P197(2017_07_31_18_14) and SP_Flash_Tool_v5.1828_Win) the scatter file with the modded simlock can be downloaded from here (*this also contains twrp recovery and root zip , flashable with the same sp flash tool by loading scatter file) what i did was to first follow your tutorial , format all partitions , then download the firmware into the phone without the simlock file, since that wasn't working (stuck in a loop) , i went into modding the simlock file (from the firmware above) with a hex editor and then download (only ! no format !! ) the simlock file into the phone (load scatter file in the sp flash tool , select download and check box only for the simlock file (*the modded one) and reboot it , worked like a charm , phone booted in a blink and started processing (app processing , creating dalvik cache etc) , i've tried an orange *operator / network sim and worked ! .
TIPS : YOU CAN TRY JUST TO DOWNLOAD ONLY THE MODDED SIMLOCK FILE INTO YOUR PHONE USING SP FLASH TOOL BY LOADING THE SCATTER FILE (ZIP LINK ABOVE) WITHOUT FLASHING THE WHOLE FIRMWARE , IT MIGHT WORK AS WELL , SINCE THE FILE IS FLASHED ... GO CLEAR CACHE FROM THE RECOVERY MENU AND REBOOT YOUR DEVICE , DON'T FORGET TO REPORT HERE .
I initially wanted to create a separated thread for this but since i've found this post via google i believe is more helpfull for the others by writing all this in here :silly: .
Hello community
Can someone please give me valid links and tutorials for unlock this phone, i´ve been here for more than 6 hours looking on how to do this, but there´s always a software or file missing. I can´t even install the USB drivers, or find a TWRP properly.
What a headache..
Thanks in advance
Need Help!! Realme 1 stuck at Orange State Your phone is Unloaked & no longer secured
I recently tried to Root My Realme 1 Phone It by following the Official Guide from here https://c.realme.com/in/post-details/1101401810746212352 . My phone was rooted Successfully but then i tried to Install magisk by this Guide https://forum.xda-developers.com/realme-1/development/official-method-root-realme-1-install-t3908030 now my Phone is Stuck at Orange State, Your Device is unlocked and can't be trusted, Your device will reboot in 5 second. This is playing again and Again. Even adb or Fastboot tool is not Detecting my device now.
SarvinBatra said:
I recently tried to Root My Realme 1 Phone It by following the Official Guide from here https://c.realme.com/in/post-details/1101401810746212352 . My phone was rooted Successfully but then i tried to Install magisk by this Guide https://forum.xda-developers.com/realme-1/development/official-method-root-realme-1-install-t3908030 now my Phone is Stuck at Orange State, Your Device is unlocked and can't be trusted, Your device will reboot in 5 second. This is playing again and Again. Even adb or Fastboot tool is not Detecting my device now.
Click to expand...
Click to collapse
did you update your device with latest update before doing root?
are you able to go to recovery mod ? if yes
format your device and see..
abhi.s4u said:
did you update your device with latest update before doing root?
are you able to go to recovery mod ? if yes
format your device and see..
Click to expand...
Click to collapse
Yes it was updated to the Latest version. In recovery mode i see only Reboot, Turn off and Wipe data option i tried each one of them but as soon as phone start the same loop start again.
help
same problem bro please anyone can provie full backup without using of oppo download tool as it requires staff account :crying:
SarvinBatra said:
I recently tried to Root My Realme 1 Phone It by following the Official Guide from here https://c.realme.com/in/post-details/1101401810746212352 . My phone was rooted Successfully but then i tried to Install magisk by this Guide https://forum.xda-developers.com/realme-1/development/official-method-root-realme-1-install-t3908030 now my Phone is Stuck at Orange State, Your Device is unlocked and can't be trusted, Your device will reboot in 5 second. This is playing again and Again. Even adb or Fastboot tool is not Detecting my device now.
Click to expand...
Click to collapse
Bro Provide me your whatsapp number as only be can help each other for fixing realme 1
need help asap
mine too same problem.. wiped data tried installing ota using sd card but no success finally installation failed,again I tried online updating via Wi-Fi it shows no downloadable version detected tried flashing .ofp firmware without any luck it shows encod data checksum error,incorrect scatter file format bla bla bla.. I'm tired of this ****.. gys plez help
Same here..tried flashing using download tool but cnt,,any help appreciated
Hard Brick Fix(Not Hard Brick Actually)
Step 1:
Just download miracle box and install it on your pc
Step2:
Download scatter file, recovery img and boot img keep all of them in one folder and then
Step3:
Follow flash stock ROM guide
Recovery :
https://mega.nz/#!QgRDGYZD!3vaot9F9A...FbeRv1BXq5jwWU
Boot:https://mega.nz/#!AlRXnQ4a!VNE1a3xRc...Kwd4L1BnAfzArs
Scatter:https://mega.nz/#!JtZzlAib!OoICrY7n8..._AWUNgMMFIz1us
Miracle Box:https://mega.nz/#!lVsQGSaC!6TTJopMyn...Ibhx2qWL_ZqDyI
Rename boot.IMG to boot.bin like and place recovery.bin,boot.bin ,scatter.bin in same folder
Credits @anuragroy
Flashing Part:
Now : Install Miracle Box > launch > go to MTK > click services > select Write from the available options > select mtk 6771 from boot options > then fron second option select realme 1 > then load mtk 6771 scatter file > check skip preloader file > then hit start
Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
Now hold power button, your phone should boot normally
Thanks to @Hamza417 for tutorial
abhi.s4u said:
Hard Brick Fix(Not Hard Brick Actually)
Step 1:
Just download miracle box and install it on your pc
Step2:
Download scatter file, recovery img and boot img keep all of them in one folder and then
Step3:
Follow flash stock ROM guide
Recovery :
https://mega.nz/#!QgRDGYZD!3vaot9F9A...FbeRv1BXq5jwWU
Boot:https://mega.nz/#!AlRXnQ4a!VNE1a3xRc...Kwd4L1BnAfzArs
Scatter:https://mega.nz/#!JtZzlAib!OoICrY7n8..._AWUNgMMFIz1us
Miracle Box:https://mega.nz/#!lVsQGSaC!6TTJopMyn...Ibhx2qWL_ZqDyI
Rename boot.IMG to boot.bin like and place recovery.bin,boot.bin ,scatter.bin in same folder
Credits @anuragroy
Flashing Part:
Now : Install Miracle Box > launch > go to MTK > click services > select Write from the available options > select mtk 6771 from boot options > then fron second option select realme 1 > then load mtk 6771 scatter file > check skip preloader file > then hit start
Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
Now hold power button, your phone should boot normally
Thanks to @Hamza417 for tutorial
Click to expand...
Click to collapse
Hello, I am not able to download the files from the mega link, Its not loading, and when I open the link with VPN, it says wrong decryption key, Can you please upload the files to Google Drive or something else?
adityadtr said:
Hello, I am not able to download the files from the mega link, Its not loading, and when I open the link with VPN, it says wrong decryption key, Can you please upload the files to Google Drive or something else?
Click to expand...
Click to collapse
sorry bro i don't have backup of links...
go through this link u have to
download whole stock rom... i haven't tested it so do it on your own risk..
Mod edit: Link removed
Hello, I know i'm a bit late on this I had this problem recently and found out that flashing the latest ota update gets rid of the problem. The message wont disappear but the phone will boot properly. Just download the latest OTA update from the realme website and put it in you sd card and flash it from recovery. Also protip everytime you flash a file reboot manually not from adb fastboot as that leads to the bootloop.
Hope it helps.
after downloading latest OTA from realme website and tried flashing using recovery mode. installation failed is showing? sombody help!
---------- Post added at 06:31 PM ---------- Previous post was at 06:21 PM ----------
bidhan001 said:
mine too same problem.. wiped data tried installing ota using sd card but no success finally installation failed,again I tried online updating via Wi-Fi it shows no downloadable version detected tried flashing .ofp firmware without any luck it shows encod data checksum error,incorrect scatter file format bla bla bla.. I'm tired of this ****.. gys plez help
Click to expand...
Click to collapse
mine same problem, did you solved the problem now?
please help if sombody has working solution/method, let me know. my realme 1 also facing same problem and tried flashing latest OTA update from official site but no luck showing installation failed:crying::crying:.
abhi.s4u said:
Hard Brick Fix(Not Hard Brick Actually)
Step 1:
Just download miracle box and install it on your pc
Step2:
Download scatter file, recovery img and boot img keep all of them in one folder and then
Step3:
Follow flash stock ROM guide
Recovery :
https://mega.nz/#!QgRDGYZD!3vaot9F9A...FbeRv1BXq5jwWU
Boot:https://mega.nz/#!AlRXnQ4a!VNE1a3xRc...Kwd4L1BnAfzArs
Scatter:https://mega.nz/#!JtZzlAib!OoICrY7n8..._AWUNgMMFIz1us
Miracle Box:https://mega.nz/#!lVsQGSaC!6TTJopMyn...Ibhx2qWL_ZqDyI
Rename boot.IMG to boot.bin like and place recovery.bin,boot.bin ,scatter.bin in same folder
Credits @anuragroy
Flashing Part:
Now : Install Miracle Box > launch > go to MTK > click services > select Write from the available options > select mtk 6771 from boot options > then fron second option select realme 1 > then load mtk 6771 scatter file > check skip preloader file > then hit start
Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
Now hold power button, your phone should boot normally
Thanks to @Hamza417 for tutorial
Click to expand...
Click to collapse
Hey, I'm having the same problem, orange state bootloop. The mega links need paid account, while sp flash tool doesnt recognize the device. I am yet to find a version of the rom which has the scatter file. Miracle doesnt work because of the mega links. I am able to go to stock recovery, however, sd card installation says "installed version is older than current one" while wifi says no update available. Any help would be much appreciated.
StripsOfTatti said:
Hey, I'm having the same problem, orange state bootloop. The mega links need paid account, while sp flash tool doesnt recognize the device. I am yet to find a version of the rom which has the scatter file. Miracle doesnt work because of the mega links. I am able to go to stock recovery, however, sd card installation says "installed version is older than current one" while wifi says no update available. Any help would be much appreciated.
Click to expand...
Click to collapse
ok i hv find this video.. plz check
Mod edit: Link removed
SarvinBatra said:
I recently tried to Root My Realme 1 Phone It by following the Official Guide from here https://c.realme.com/in/post-details/1101401810746212352 . My phone was rooted Successfully but then i tried to Install magisk by this Guide https://forum.xda-developers.com/realme-1/development/official-method-root-realme-1-install-t3908030 now my Phone is Stuck at Orange State, Your Device is unlocked and can't be trusted, Your device will reboot in 5 second. This is playing again and Again. Even adb or Fastboot tool is not Detecting my device now.
Click to expand...
Click to collapse
Bro I have the same problem please help if u fixed it in phone when I opening the recovery mode it showing"Oppo verify pass fastboot_unlock_verify ok".
How to fix it bro
realme 1 problem
plz help me i cannot get into recovery mode on realme 1 and it is stuck in logo and orange state and restart over and over
I have same problem when i gone to REALME service centre they told me that we can not fix this because it is root and they were saying it can charge 5000-6000rs for motherboard and they said that it may be not work (Realme 1)
my phone is stuck on boot screen and i can not booting in recovery mod
what can i do please help me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
please!please!please!please!please!please!please!please!please!please!please!please!please!please!please!please
same problem on realme u1
what should I do?
ASHISH12345677 said:
Bro Provide me your whatsapp number as only be can help each other for fixing realme 1
Click to expand...
Click to collapse
my number 7999809456 plzz help me out i am ready to pay u plzz
SarvinBatra said:
Yes it was updated to the Latest version. In recovery mode i see only Reboot, Turn off and Wipe data option i tried each one of them but as soon as phone start the same loop start again.
Click to expand...
Click to collapse
I was unlocked bootloader of Realme c2 and installed twrp patched file. Successfully installed. Now i unable to go to recovery mod. Showing ''5 second to reboot." And "Oppo verify pass ok". Please help me.