Related
So sorry for being so new to this and confused but i've downloaded Bodhi from the posts (That insist it's for Archos gen8) but i can NOT figure out how to actually install it. I've tried Updating my FW via Recovery, several times with sever different things and also I've tried flashing (but Bodhi is in the wrong format) nothing is seeming to work.
-Can someone either point me in the direction of a TUT(link) or just give me the run down here, I will be IMMENSELY grateful
P.S. Ive been at this for about a week now :/
kartkid said:
So sorry for being so new to this and confused but i've downloaded Bodhi from the posts (That insist it's for Archos gen8) but i can NOT figure out how to actually install it. I've tried Updating my FW via Recovery, several times with sever different things and also I've tried flashing (but Bodhi is in the wrong format) nothing is seeming to work.
-Can someone either point me in the direction of a TUT(link) or just give me the run down here, I will be IMMENSELY grateful
P.S. Ive been at this for about a week now :/
Click to expand...
Click to collapse
You really need to read up on your device and how it works. Have installed the SDE or the openAOS boot menu? Google is your friend, instructions have been posted on multiple websites. If you have installed the SDE, and only want Bodhi and the stock Android, just download the bodhi image and replace the rootfs.img on your internal storage with the bodhi image. Then boot into Developer Edition by holding the volume key down and selecting Developer Edition.
If you want more than 2 OSes, install the openAOS boot menu. Here's an entire wiki just for our gen8s. http://dev.openaos.org/wiki/SettingUpMultiRootGen8
msticninja said:
If you want more than 2 OSes, install the openAOS boot menu. Here's an entire wiki just for our gen8s. http://dev.openaos.org/wiki/SettingUpMultiRootGen8
Click to expand...
Click to collapse
Here is a big full instructions thread from me
http://forum.xda-developers.com/showthread.php?t=1153522
msticninja said:
You really need to read up on your device and how it works. Have installed the SDE or the openAOS boot menu? Google is your friend, instructions have been posted on multiple websites. If you have installed the SDE, and only want Bodhi and the stock Android, just download the bodhi image and replace the rootfs.img on your internal storage with the bodhi image. Then boot into Developer Edition by holding the volume key down and selecting Developer Edition.
If you want more than 2 OSes, install the openAOS boot menu. Here's an entire wiki just for our gen8s. http://dev.openaos.org/wiki/SettingUpMultiRootGen8
Click to expand...
Click to collapse
I did read up, i have UrukDroid installed and I believe i have done what u insisted to multiple times with no success.
Lenn said:
Here is a big full instructions thread from me
http://forum.xda-developers.com/showthread.php?t=1153522
Click to expand...
Click to collapse
Thnx man, I've seen you help others with their problem and to be honest i was hoping that it'd be you who helped me as well.
I've heard good things about the OpenAOS but bad things for it on the Arcos 101. I'll give it a try though i suppose tho i only want bodhi and Archos OS
TY for all the help thus far to both of you.
kartkid said:
Thnx man, I've seen you help others with their problem and to be honest i was hoping that it'd be you who helped me as well.
I've heard good things about the OpenAOS but bad things for it on the Arcos 101. I'll give it a try though i suppose tho i only want bodhi and Archos OS
TY for all the help thus far to both of you.
Click to expand...
Click to collapse
If you have Urukdroid, then you have more than just Archos and Bodhi. Urukdroid uses the developer edition's OS slot, so you are actually trying to use three OSes. If you want to keep Uruk, you'll need the openAOS boot-menu, which is a better solution, in my opinion, than $auron's AlternativeOS menu.
I'm on a 101, so I had to do some stuff to make Uruk and Bodhi display correctly. All this stuff has been added to Lenn's tutorial. If you want to keep Uruk and have Bodhi, it's the best way. If you can deal with just having the stock Archos firmware and Bodhi, then you can just use reinstall the sde and overwrite the rootfs.img(sde must be reinstalled though, uruk has overwritten it).
kk thnx, so i just reinstall SDE?
and also the zImage file in http://download.openaos.org/bubu/gen8/ keeps DLing as a txt file. can u help me with that? :/
please and thankyou.
kartkid said:
kk thnx, so i just reinstall SDE?
and also the zImage file in http://download.openaos.org/bubu/gen8/ keeps DLing as a txt file. can u help me with that? :/
please and thankyou.
Click to expand...
Click to collapse
Just reinstall SDE and copy the rootfs.img if you don't need Urukdroid. If you want multiboot, use Bubu's initramfs and zimage. Just rename the zimage.txt to zimage, it will still work.
msticninja said:
Just reinstall SDE and copy the rootfs.img if you don't need Urukdroid. If you want multiboot, use Bubu's initramfs and zimage. Just rename the zimage.txt to zimage, it will still work.
Click to expand...
Click to collapse
That doesnt work..
kartkid said:
That doesnt work..
Click to expand...
Click to collapse
Did you tried it according to my How to ?
download link of Bodhi for Archos 101it
Hi, this is an old post, but I would like to post the link where I downloaded Bodhi for my Archos 101it. I have been using it for more than a year and it's awesome. It's just a pity the project has been abandoned. I hope some illuminated genius could retake it and configure the system for sound, videos and camera, which aren't working.
The link is:
mirror.transact.net.au/pub/sourceforge/b/project/bo/bodhilinux/ARM/ALPHA/
New link
The above link seems to be dead. I have uploaded the file here:
dl.dropboxusercontent.com/u/38867415/bodhi-linux-archos-g8.zip
Just write https:// before that.
ulyses3 said:
The above link seems to be dead. I have uploaded the file here:
dl.dropboxusercontent.com/u/38867415/bodhi-linux-archos-g8.zip
Just write https:// before that.
Click to expand...
Click to collapse
Someone should really make a new index of roms and iso's for the g8, anyway if u want help on setting up sound you can ask me, cause I used this for a while and I know how to start the sound, but it will have a "glitch" when no sound is playing (as in the tab will make odd sounds randomly). If you fixed that already then sorry, I read ur last comment before this one and even if it was in may I was thinking I may help.
I would greatly appreciate if you can help me configure sound with Bodhi linux, so I don't have to change to stock android firmware to play videos or music. I don't mind the glitch, though.
Did you install any codecs? I have been playing with the settings of the recognised Wolfson audio card, but without any luck.
ulyses3 said:
I would greatly appreciate if you can help me configure sound with Bodhi linux, so I don't have to change to stock android firmware to play videos or music. I don't mind the glitch, though.
Did you install any codecs? I have been playing with the settings of the recognised Wolfson audio card, but without any luck.
Click to expand...
Click to collapse
So as I can understand u know how to access alsamixer in terminal, I don't remember what the settings I left on were, but I know I enabled everything and set all volumes to maximum and then I started playing music and disabled the settings one by one till I was left with only the needed settings enabled, hope it helps, if u want I can reinstall bodhi and do the settings on Monday and post them here.
Sound problem solved
Thank you, as you suggested, I set all volumes to the maximum in alsamixer. Then I selected the alsa Wolfson driver under the audio preferences in smplayer2, and the both the music and videos are playing well now! The only problem I find is with the video drivers, with the videos not playing smoothly, but they're ok.
ulyses3 said:
Thank you, as you suggested, I set all volumes to the maximum in alsamixer. Then I selected the alsa Wolfson driver under the audio preferences in smplayer2, and the both the music and videos are playing well now! The only problem I find is with the video drivers, with the videos not playing smoothly, but they're ok.
Click to expand...
Click to collapse
There is nothing to do about that, I was trying to build lubuntu as described at the openaos site (cause that seems to be 100% functional....or at least as much as it can be) but ended up being unable so I am now using debian with lxde (works way better), but it took a bit to setup the screen to auto turn off and I didn't manage to set long press as right click.
EDIT: Also I didn't manage to get e17 to work on it so I am kinda stuck with lxde, too bad, really loved e17 on bodhi.
This is a compilation, some of my own thoughts combined with ideas from others scattered throughout this forum... I really can't credit anyone other than who has already been credited above because it's just standard ideas.
Please feel free to add legitimate tips and tweaks to this thread so everyone can have a better TP experience! If it's noteworthy and people say it's helpful, I will add it to this OP!
1. Download the proper GAPPS and GAPPS fix to get Calendar working (thanks Stroid01, I borrowed your links from the original install thread)
2. Download the Charging and SystemUI fix from Dalingrin
3. Download Chainfire3D and install the Beta EGL drivers. Why? They fixed a lot of visual glitches that came with the stock ones.
4. Download and install the latest Adobe Flash 11.1 from the Market to enable Flash video, otherwise it won't work right out of the gate.
5. Enable USB transfer: Settings -> Storage -> Advanced (the 3 little dots in the top right corner) -> USB computer connection, then check the box next to "Media Device (MTP)"
6. It was in my best interest to change the DPI of the LCD, it'll look much better and the icons won't be so huge, my favorite has been 132 (though others have reported 145 to be good as well): Edit the build.prop in Root Explorer (mount R/W first) and change the line "ro.sf.lcd_density = 160" to "ro.sf.lcd_density = 132"
7. Install the cracked Market to fix any issues with your new DPI settings (Thanks, marios96)
8. To run Gamelot games edit your build.prop (it's located in your /system directory) to say this (I changed mine to XOOM instead of DROIDX but the idea is the same, thanks ssconceptziew):
ro.product.model=DROIDX
manufacturer=motorola
I guess this could be moved to the Development forum, I just thought this would be appropriate here since it's not actually involving developing something, just tweaks.
thanks, guess i will try the chainfire thing
How did you install chainfire. Tells me my device isnt compatible. And where do i find the drivers. Thanks in advance
Tapatalkin in from my ICS equipped Touchpad
When I try to install an app in the market, it gets stuck at the downloading stage. Is there a way to fix this? I've tried doing a fresh wipe and install of CM9 but nothing has worked! Also, I'm having problems downloading the UI fix. The countdown keeps on repeating.
Thanks. Looks much better now.
On WinXP I could not get MTP to work until I disabled debugging. Once I did that it showed up on my computer as a media device.
http://rootzwiki.com/topic/15568-rel-market-fix-dpi-compatibility/
Also install the cracked market from above to fix any compability issues with the new DPI.
wizegui said:
When I try to install an app in the market, it gets stuck at the downloading stage. Is there a way to fix this? I've tried doing a fresh wipe and install of CM9 but nothing has worked! Also, I'm having problems downloading the UI fix. The countdown keeps on repeating.
Click to expand...
Click to collapse
I have the same problem. If I figure it out I'll post it here as well.
jok3sta said:
How did you install chainfire. Tells me my device isnt compatible. And where do i find the drivers. Thanks in advance
Tapatalkin in from my ICS equipped Touchpad
Click to expand...
Click to collapse
Find an APK online. I'm not telling you to go get warez and download the pro version, I'm saying go get a free version.
And Chainfire is a driver program. That's what it's for, installing new drivers
I already got the pro version . The free version dosnt have the driver
Tapatalkin it from my Epic 3g Touch
You can also mention changing the kernel so you can get voltage control.
Samsung Galaxy S Captivate ICS CM9, Glitch Kernel | HP TouchPad CM9
iamsamsamiam said:
You can also mention changing the kernel so you can get voltage control.
Samsung Galaxy S Captivate ICS CM9, Glitch Kernel | HP TouchPad CM9
Click to expand...
Click to collapse
Flashing the new kernel didn't give me any voltage control in SetCPU.
treehumper said:
Flashing the new kernel didn't give me any voltage control in SetCPU.
Click to expand...
Click to collapse
Yeah, there's no voltage control in SetCPU even though he states it in his change logs. It does work in System Tuner though.
Tried, and you're right. The different kernel is a bit more unstable at this point in time, however. I am using it, but it's not for those that don't mind more frequent reboots (what's funny is that this is also my primary work device.... lol).
I have a tweak.
To run Gameloft Games edit your build.prop to say this:
ro.product.model=DROIDX
manufacturer=motorola
ssconceptz said:
I have a tweak.
To run Gameloft Games edit your build.prop to say this:
ro.product.model=DROIDX
manufacturer=motorola
Click to expand...
Click to collapse
Doesn't work for me. I still cant play modern combat 3
Tapatalkin in from my ICS equipped Touchpad
Did you copy the build.prop to your internal, edit then replace and restart. You can't edit it in place.
Sent from my SPH-D710 using xda premium
ssconceptz said:
Did you copy the build.prop to your internal, edit then replace and restart. You can't edit it in place.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I used root explorer to edit it.. changing it dis something because before I did I couldn't even download the game from the market. But now I can't download the data file
Tapatalkin it from my Epic 3g Touch
Use the method I described
Sent from my SPH-D710 using xda premium
Is it possible to install xposed on Remix OS?
Nope. Goes into bootloop.
I've copied all x86 xposed files to system, its booted, but show notif "xposed installed, but not active".
It's also prevent me from installing any app.
Aguys said:
I've copied all x86 xposed files to system, its booted, but show notif "xposed installed, but not active".
It's also prevent me from installing any app.
Click to expand...
Click to collapse
Does not matter. Even if you do copy it, it wont work.
You wanna try the better method? Here.
1) Press Alt+F1. You will activate the terminal. Main terminal, not terminal emulator or something like that.
2) type "cp -avR /sdcard/xposed_data /system"
3) This copies all the xposed data to the system, where it is supposed to be.
4) Reboot.
5) Praise Altman, as you get to witness the bootloop, as xposed is not supported.
On the other hand, if you use android 4.4 rc3 from the android x86 project website, you can install xposed using the echo and chmod commands.
Aguys said:
I've copied all x86 xposed files to system, its booted, but show notif "xposed installed, but not active".
It's also prevent me from installing any app.
Click to expand...
Click to collapse
this happened with me too, but not remix os, it happened with me on genymotion android 5.1.1
NHK said:
this happened with me too, but not remix os, it happened with me on genymotion android 5.1.1
Click to expand...
Click to collapse
Do you mean you got xposed working on Remix OS ?
if so, how ? can you please write a small guide ?
gps3dx said:
Do you mean you got xposed working on Remix OS ?
if so, how ? can you please write a small guide ?
Click to expand...
Click to collapse
i said "but not remix os" so idk if it must work on Remix OS. and i didnt provide a solution even , thats my previous post
this happened with me too, but not remix os, it happened with me on genymotion android 5.1.1
Click to expand...
Click to collapse
ill edit: that happened on genymotion and i didnt get a solution
NHK said:
i said "but not remix os" so idk if it must work on Remix OS. and i didnt provide a solution even , thats my previous post
ill edit: that happened on genymotion and i didnt get a solution
Click to expand...
Click to collapse
There is already a thread explaining this and it is possible but it is a lot of work. Search the forum for this exact title.
Help
So have any of you been able to get xposed framework onto remix os and if so how?
mystery6006 said:
So have any of you been able to get xposed framework onto remix os and if so how?
Click to expand...
Click to collapse
Read my post above yours. Google or search this XDA forum. I am being lazy and not finding it for you.
Thanks I think
I do not mind doing some work to get exposed going so far I have tried modifying the system files using Ubuntu and And mounting the system image to no avail. The previous posts in this thread would suggest that it is not possible at the moment I do not believe it. Orion what I am asking is for you to point me to the correct information for accomplishing the task of installing xposed on remix os.
mystery6006 said:
I do not mind doing some work to get exposed going so far I have tried modifying the system files using Ubuntu and And mounting the system image to no avail. The previous posts in this thread would suggest that it is not possible at the moment I do not believe it. Orion what I am asking is for you to point me to the correct information for accomplishing the task of installing xposed on remix os.
Click to expand...
Click to collapse
And I am saying search this forum.
its all about "Symbolic link" if we know witch files we should create for then that will be easy
More info
Along those lines how can I take a xposed zip made for x86 5.1 and arrange it in the system files of remix os keeping all file permissions and symbolic links the way they need to be and updating the binary if anyone knows of a script I could run in terminal from Ubuntu with the remix is file system mounted that would be great.
mystery6006 said:
Along those lines how can I take a xposed zip made for x86 5.1 and arrange it in the system files of remix os keeping all file permissions and symbolic links the way they need to be and updating the binary if anyone knows of a script I could run in terminal from Ubuntu with the remix is file system mounted that would be great.
Click to expand...
Click to collapse
Do you think scripts come from the linux god? lol. If a method existed, and a manual method would have to exist in order for a script of the process to exist, someone would have posted it by now. Scripts are nothing more than automation of multiple manual steps. So please, unless a method has already been posted or you're willing to work out all of the proper steps, don't ask for a script that will do it for you. I too want xposed on remix, but am I willing to put in the time to attempt to get it working? No. Not right now at least. So I don't bother asking someone else to do it for me. This is XDA. Asking for OTAs and asking for something you could search for are both frowned upon here. Sorry if that seems harsh, but until you've at least attempted to develop something, don't just assume it's a walk in the park for others to do so. Especially with something as complex as xposed.
Thanks. Hope I didn't startle you.
systemless xposed might be the best route: patch ramdisk.img and create and mount /data/xposed.img
very close to working with systemless root
Maromi said:
very close to working with systemless root
Click to expand...
Click to collapse
big thanks for investig your time into this !
silly question: have you tried to enable the toggle button named "xposed status" ?
keep up the wonderful work :good:
that screenshot is from 64-bit remix there isn't x86_64 xposed.
it fully works on 32-bit android-x86 MM builds. haven't tried 32-bit remix yet.
Maromi said:
that screenshot is from 64-bit remix there isn't x86_64 xposed.
it fully works on 32-bit android-x86 MM builds. haven't tried 32-bit remix yet.
Click to expand...
Click to collapse
Do you have a copy of the xposed.img and ramdisk.img from Ax86; just want to take a look.
This week's OTA update integrates Android M's latest security patch as well as Android-x86 rc2.
If you're new to Remix OS for PC, you can download it here: http://www.jide.com/remixos-for-pc#downloadNow
Here are the full release notes:
Remix OS for PC version: 3.0.201
Release date: August 16, 2016
Added latest Google Android M Security patch
Latest Android-x86 RC2 has been integrated and the highlighted features are as follows:
Fixed more Wi-Fi issues
Fixed more audio card loading issues
Fixed software rendering crashing issues on VM's like QEMU and VirtualBox
OTA support disabled if software was NOT installed by official Jide installer
Newly installed apps will have a small blue icon on it so they can be easily identified
As always, please give us your feedback here and help us continue to develop better!
https://docs.google.com/forms/d/1cZNesOmnmO2esilFpvMzFZ874rvwsiKgWIX2fo9QsDk/viewform
Thanks!
I'm using 3.0.104, there is no ota update yet?
Sent from my Moto G using XDA Labs
Aguys said:
I'm using 3.0.104, there is no ota update yet?
Sent from my Moto G using XDA Labs
Click to expand...
Click to collapse
@Aguys Can you check again? From our end, it looks good. Thanks for your patience!
Fresh install :
find --set-root --ignore-floppies /menu.lst
error 15: File not found
Remix folder injured I can not delete.
krystyan84 said:
Fresh install :
find --set-root --ignore-floppies /menu.lst
error 15: File not found
Remix folder injured I can not delete.
Click to expand...
Click to collapse
@krystyan84 - Are you using UEFI or Legacy boot? Can you send us feedback and a screenshot here?
https://docs.google.com/forms/d/1cZNesOmnmO2esilFpvMzFZ874rvwsiKgWIX2fo9QsDk/viewform
Thanks!
krystyan84 said:
Fresh install :
find --set-root --ignore-floppies /menu.lst
error 15: File not found
Remix folder injured I can not delete.
Click to expand...
Click to collapse
Run chkdsk on the partition.
@RemixOS_Jason These OTAs seem to take 1-2 days to show up for me; are they rolled out by location?
RemixOS_Jason said:
@krystyan84 - Are you using UEFI or Legacy boot? Can you send us feedback and a screenshot here?
https://docs.google.com/forms/d/1cZNesOmnmO2esilFpvMzFZ874rvwsiKgWIX2fo9QsDk/viewform
Thanks!
Click to expand...
Click to collapse
Sent :good:
Legacy boot Remix OS 3.0.201 (win10/remix dual boot 3.0.104 It worked well)
IMG
http://imgur.com/a/F1uZm
EDIT:
HypoTurtle:Run chkdsk on the partition.
This is interesting, chkdsk it was executed without error.
Reboot and Remix is boouted up :good:
krystyan84 said:
Sent :good:
Legacy boot Remix OS 3.0.201 (win10/remix dual boot 3.0.104 It worked well)
IMG
http://imgur.com/a/F1uZm
EDIT:
HypoTurtle:Run chkdsk on the partition.
This is interesting, chkdsk it was executed without error.
Reboot and Remix is boouted up :good:
Click to expand...
Click to collapse
In my case, when Remix OS running don't eject partition where Remix OS installed. If something wrong happens, that partition will not affected... CMIIW
Sent from my Moto G using XDA Labs
EDIT:
OTA update didn't work, I didn't wait and installed it once again on my Lenovo miix 700, but a HUGE DISAPPOINTMENT:
1) audio still not working (Realtek high definition audio),
2) no USB mount, it gives an error about a corrupted usb card.
3) YouTube doesn't work
4) kernel is not updated to 4.4.1.7
audio worked on Android x86 RC2
Any idea @RemixOS_Jason ?
Hi @RemixOS_Jason In my laptop, kernel verson is still 4.4.14 even after the update,Is it 4.4.17??? My update went fine and i'm on 3.0.201 now.
is over hdmi fixed? someone please try it.
KamaL said:
EDIT:
OTA update didn't work, I didn't wait and installed it once again on my Lenovo miix 700, but a HUGE DISAPPOINTMENT - audio still not working (Realtek high definition audio), no USB mount and now YouTube doesn't work.
audio worked on Android x86 RC2
Any idea @RemixOS_Jason
Click to expand...
Click to collapse
I thought your audio would be working with remix os since it's working on latest Android x86; that's very strange
Ludespeed said:
I thought your audio would be working with remix os since it's working on latest Android x86; that's very strange
Click to expand...
Click to collapse
unfortunately not... maybe because kernel isn't updated to the new version mentioned in the changelog
A clean install using Titanium Backup to restore apps. Very fast, smooth.
A few glitches:
1 phantom usb drive
2 no way to change the notifications
3 bluetooth doesn't work
still have the "sleep mode wake up hang" bug
KamaL said:
EDIT:
OTA update didn't work, I didn't wait and installed it once again on my Lenovo miix 700, but a HUGE DISAPPOINTMENT:
1) audio still not working (Realtek high definition audio),
2) no USB mount, it gives an error about a corrupted usb card.
3) YouTube doesn't work
4) kernel is not updated to 4.4.1.7
audio worked on Android x86 RC2
Any idea @RemixOS_Jason ?
Click to expand...
Click to collapse
1) audio still not working (Realtek high definition audio) - We are still working on more support for audio cards. Please be patient as this is still a continual work in progress.
2) no USB mount, it gives an error about a corrupted usb card - Our testers have shown that most external USB drives are supported. Can you send us your info through our user feedback form so we're aware of your specific device's issues? https://docs.google.com/forms/d/1cZNesOmnmO2esilFpvMzFZ874rvwsiKgWIX2fo9QsDk/viewform
3) YouTube doesn't work - I've been testing YouTube all day on my Remix OS for PC device. The app works fine. Watching on YouTube through Chrome has some issues, but on the whole, still works. Just not as well as the app. So, are you referring to the app or in browser experience?
4) kernel is not updated to 4.4.1.7 - I just checked with our PM and he stated that they're still testing this. Though we integrated rc2, this is one thing that was held back for testing to make sure it didn't affect overall system stability. However, stating it on the release notes was a mistake made on my part. There was miscommunication between myself and the PM and I listed this when it was still in our internal testing phase. I do apologize for this mistake and the confusion it may have caused!
HypoTurtle said:
Run chkdsk on the partition.
@RemixOS_Jason These OTAs seem to take 1-2 days to show up for me; are they rolled out by location?
Click to expand...
Click to collapse
@HypoTurtle It may be due to the servers in your location. Where are you writing to us from?
RemixOS_Jason said:
@HypoTurtle It may be due to the servers in your location. Where are you writing to us from?
Click to expand...
Click to collapse
The UK
where is the ota Update option in remix 3.0 32-bit , not find it.
RemixOS_Jason said:
1) audio still not working (Realtek high definition audio) - We are still working on more support for audio cards. Please be patient as this is still a continual work in progress.
2) no USB mount, it gives an error about a corrupted usb card - Our testers have shown that most external USB drives are supported. Can you send us your info through our user feedback form so we're aware of your specific device's issues? https://docs.google.com/forms/d/1cZNesOmnmO2esilFpvMzFZ874rvwsiKgWIX2fo9QsDk/viewform
3) YouTube doesn't work - I've been testing YouTube all day on my Remix OS for PC device. The app works fine. Watching on YouTube through Chrome has some issues, but on the whole, still works. Just not as well as the app. So, are you referring to the app or in browser experience?
4) kernel is not updated to 4.4.1.7 - I just checked with our PM and he stated that they're still testing this. Though we integrated rc2, this is one thing that was held back for testing to make sure it didn't affect overall system stability. However, stating it on the release notes was a mistake made on my part. There was miscommunication between myself and the PM and I listed this when it was still in our internal testing phase. I do apologize for this mistake and the confusion it may have caused!
Click to expand...
Click to collapse
Thank you for the detailed reply:
1) no audio - This is a popular sound card, and there are other threads on XDA and Google groups talking about this, so I hope it's high in your priority list. If you need me for any beta testing for this audio card, I'm in!
The fact that Android x86 RC2 has audio working gives hope it's not that difficult to implement it, right?
2) I was actually talking about a microSDXC card with exFAT format, a Kensington 64GB card, which doesn't mount. Is it a known bug?
3) Youtube doesn't work both using the standalone app and through browser. I don't know why.
4) This explains why it still shows the older kernel. Maybe this is the reason for missing audio???
Keep up the good work!!
Hello guys!
I'm starting this thread as I managed to install win10 on my X90L (Android) YogaBook
It was not easy to find a way to fix the ACPI error but it is possible!
Will update this post in a few hours with a guide on how to do it yourself.
UPDATE: link to the guide -> poz1.com/windows-on-android-lenovo-yogabook/
PLEASE NOTE THAT IF YOU CONTINUE YOU WILL END UP WITH A YOGABOOK WITHOUT INPUT DEVICES!!!
(EXTERNAL KEYBOARD WILL BE NEEDED) AND NO ANDROID INSTALL!!!
So far i got almost everything working except:
- Touchscreen
- Keyboard
- Webcam in the keyboard panel (the other one works fine)
- NFC
- Backlight Control (added 25/5/2018)
I'm getting very near to have the touch and the keyboard working though
P.s. In attach you find the outputs from 3DMark - IceStorm Extreme (default settings), would be much appreciated if someone with the real Win version shared its score
Any chance of posting you work to date. Got an X90F just crying out for Windows.
Broomfundel said:
Any chance of posting you work to date. Got an X90F just crying out for Windows.
Click to expand...
Click to collapse
I have added the link to the guide! If yo have any issues let me know but keep in mind that currently no input devices (touchscreen or keyboard) work!
Thanks for posting this. I am really so impressed. Will be trashing my X90F tomorrow. Just got to dig out a powered USB hub. Ill report back, and lets see what happens.
(Hopefully not a brick)
OK,
So far so good. I get to the amending of the of aml. But keep getting.
Intel ACPI Component Architecture
ASL+ Optimizing Compiler/Disassembler version 20180508
Copyright (c) 2000 - 2018 Intel Corporation
iASL: Segmentation Fault
iASL: Terminating
To clarify the process. Decompile the DSTDroid.aml, then insert the OperationRegion (GNVS, SystemMemory, 0x7B3CF000, 0x0369)
Field (GNVS, AnyAcc, Lock, Preserve)
{ etc.. } section from the DSTDroid.dsl and use it to replace the equivalent section in the DSTWin.dsl in your files.
Then compile the DSTWin.dsl with the
iasli -ta DSDTWin.dsl
command.
This is how I am reading it, but have not managed to get it to work yet.
It decompiles with the two errors you mention, but wont recompile no matter how I try it.
I am using Notepadd++ so its not hidden characters.
Any thoughts, and thanks again for your efforts on this.
Broomfundel said:
OK,
So far so good. I get to the amending of the of aml. But keep getting.
Intel ACPI Component Architecture
ASL+ Optimizing Compiler/Disassembler version 20180508
Copyright (c) 2000 - 2018 Intel Corporation
iASL: Segmentation Fault
iASL: Terminating
To clarify the process. Decompile the DSTDroid.aml, then insert the OperationRegion (GNVS, SystemMemory, 0x7B3CF000, 0x0369)
Field (GNVS, AnyAcc, Lock, Preserve)
{ etc.. } section from the DSTDroid.dsl and use it to replace the equivalent section in the DSTWin.dsl in your files.
Then compile the DSTWin.dsl with the
iasli -ta DSDTWin.dsl
command.
This is how I am reading it, but have not managed to get it to work yet.
It decompiles with the two errors you mention, but wont recompile no matter how I try it.
I am using Notepadd++ so its not hidden characters.
Any thoughts, and thanks again for your efforts on this.
Click to expand...
Click to collapse
Hello Broomfundel,
I never got that error, but it seems to be a problem of the ASL Compiler build not of your file.
I am using Mac so I have another build, if you want to post the file I can compile it for you .
Otherwise you can try an older release or to build the tool from source maybe?
Poz1 said:
Hello guys!
I'm starting this thread as I managed to install win10 on my X90L (Android) YogaBook
It was not easy to find a way to fix the ACPI error but it is possible!
Will update this post in a few hours with a guide on how to do it yourself.
UPDATE: link to the guide -> poz1.com/windows-on-android-lenovo-yogabook/
PLEASE NOTE THAT IF YOU CONTINUE YOU WILL END UP WITH A YOGABOOK WITHOUT INPUT DEVICES!!!
(EXTERNAL KEYBOARD WILL BE NEEDED) AND NO ANDROID INSTALL!!!
So far i got almost everything working except:
- Touchscreen
- Keyboard
- Webcam in the keyboard panel (the other one works fine)
- NFC
I'm getting very near to have the touch and the keyboard working though
Click to expand...
Click to collapse
Hi, i have the Lenovo Yoga Book Windows version, im crying to install Stock Android on it, can you PLZ write a guide about doing it, or at least if there is a way to install the kernelflinger.efi or the fastboot mode on YB windows it will be great.
to fix the whole bugs you faced, try to reinstall windows 10 using this methode https://forum.xda-developers.com/yoga-book/how-to/windows-guide-creating-windows-10-t3718823
Thanks
THE MAXIMUM POWER said:
Hi, i have the Lenovo Yoga Book Windows version, im crying to install Stock Android on it, can you PLZ write a guide about doing it, or at least if there is a way to install the kernelflinger.efi or the fastboot mode on YB windows it will be great.
to fix the whole bugs you faced, try to reinstall windows 10 using this methode https://forum.xda-developers.com/yoga-book/how-to/windows-guide-creating-windows-10-t3718823
Thanks
Click to expand...
Click to collapse
Hi,
KernelFlinger is opensource and come with an installer, it should be pretty simple to install it.
Right now I don't have my YogaBook as I am travelling but I can try in the next few days
OK, Older release worked, but I get a .hex file, your instructions talk about a new aml file. Do I use the .hex file or is there another option other than the -ta one that would create the aml.
BTW. I am enjoying this. So thanks again.
Broomfundel said:
OK, Older release worked, but I get a .hex file, your instructions talk about a new aml file. Do I use the .hex file or is there another option other than the -ta one that would create the aml.
BTW. I am enjoying this. So thanks again.
Click to expand...
Click to collapse
With the -ta option I get both the .hex and the .aml file but you can try -tc if it doesn't work. Maybe due to the different build
P.s. (for other people that may incur in this) If you don't get the output files check that you have as last line of the terminal
"Compilation complete. 0 Errors"
OK, I am getting 7 errors. My current theory is that the DSTDWin.dsl will only compile with the same version number of the compiler it was decompiled with. I have attached my DSDTDroid.dsl so you can have a go. At least it will prove I got things right up to that point. Might be worth posting the original DSTDWin.aml for me to try this end.
If we are lucky it might turn out that the patched DSTDWin.aml files are consistent across the same model devices.
So... It seems both pen mode and keyboard mode of holo keyboard won't work... Am I right?
It's sad that if they won't work even we install the drivers from the lenovo website
Poz1 said:
Hi,
KernelFlinger is opensource and come with an installer, it should be pretty simple to install it.
Right now I don't have my YogaBook as I am travelling but I can try in the next few days
Click to expand...
Click to collapse
can after installing Windows booting to kernelflinger? if you can make a thread about how can you install/reinstall kernelflinger will be amazing?
Thank you
Poz1 said:
Hello guys!
Click to expand...
Click to collapse
Have you tried with the ISO from this forum with the Windows injected drivers? Here https://forum.xda-developers.com/yoga-book/how-to/windows-guide-creating-windows-10-t3718823
As Poz1 is obviously busy at the moment. Can anyone else get the DSTDWin.aml file for me to try and decode?
Thanks
Sorry guys I've been busy with university
Broomfundel said:
OK, I am getting 7 errors. My current theory is that the DSTDWin.dsl will only compile with the same version number of the compiler it was decompiled with. I have attached my DSDTDroid.dsl so you can have a go. At least it will prove I got things right up to that point. Might be worth posting the original DSTDWin.aml for me to try this end.
If we are lucky it might turn out that the patched DSTDWin.aml files are consistent across the same model devices.
Click to expand...
Click to collapse
There you go I'm also updating the files DSTDWin of my blog with one with some fixes Well they depend on the settings you use in your Bios (that's why Windows may not boot after install, it changes some parameters (the wait time of the bios and the default boot partition)). When you use the builtin one is the bios that "updates" it for you but for now we need to do it by hand If we are going to end with everything working we can release a patched "Win" bios and everything will be simpler
Riskypedia said:
So... It seems both pen mode and keyboard mode of holo keyboard won't work... Am I right?
It's sad that if they won't work even we install the drivers from the lenovo website
Click to expand...
Click to collapse
I know There something in the DSDT (the file that tells the os which and where your pc components are) that has to be fixed to make Windows see these parts correctly
THE MAXIMUM POWER said:
can after installing Windows booting to kernelflinger? if you can make a thread about how can you install/reinstall kernelflinger will be amazing?
Thank you
Click to expand...
Click to collapse
Didn't try Will do as soon as I have some free time :fingers-crossed:
Kinyapiplele said:
Have you tried with the ISO from this forum with the Windows injected drivers? Here https://forum.xda-developers.com/yoga-book/how-to/windows-guide-creating-windows-10-t3718823
Click to expand...
Click to collapse
Yep, but the problem is in the DSDT Thanks fot the input anyway
Poz1 said:
Sorry guys I've been busy with university
Click to expand...
Click to collapse
Don't worry, we all have real lives as well. I'm in the UK and we have a bank holiday on Monday. So this weekend, Ill get stuck in again.
Thanks for all your doing on this. You have already got further than anyone else who tried.
let me know if you have more problems
I have added a 3DMark test in the first post for those that are interested in how it performs
Poz1 said:
let me know if you have more problems
I have added a 3DMark test in the first post for those that are interested in how it performs
Click to expand...
Click to collapse
Just another Question, you as a Advance user, do you believe that we (yoga book Windows owners) can boot Android yb STOCK ROM ( i mean not the Android x86 based distros)?
Yes, but I think you would have to do the "reverse" DSDT injection (from win to android) as the official ROM has drivers for that components.
This means that, if you're lucky you would end up with our same problems (keyboard, pen and touch). If we don't fix that before
The problem with Android is that it is meant to be flashed on rom instead of being installed and this makes things more difficult.
It should be possible to flash the rom on an USB key, add grub and use it for DSDT injection like we do and see what happens.
Another problem is that the provided kernelflinger seems to have most of the security options enabled so 99% it will refuse to boot anyway.
Since it is opensource it should be possible to fix this anyway.
So yes, but it a loooong journey