Related
Hello,
- i'm the proud owner of an LG P500, i mannaged to "kill" it alot of times, one time i bricked it so bad the power button was useless. I'm going to tell you how i always manneged to fix it.
1. - install the USB DRIVERS for LG P500 Download LINK
2. - extract the KDZ archive , install msxml.msi, Download LINK, Download Froyo 2.2.2. v10E.kdz after that open >> KDZ_FW_UPD.exe, select type 3GQCT and mode DIAG (select this only if your phone starts when you connect the USB and the battery charging logo apears) if the phone starts in Emergency Mode or dosen't start at all >> remove battery and while holding the BACK and volume UP buttons connect the USB, the phone should start in Emergency Mode, after that select in KDZ, MODE > EMERGENCY, select file > V10E_00.kdz and press the "Launch software update" .
- wait for KDZ to do it's job ( until it says FINISHED) after it is finished it will reset the phone (alot of times the phone wolden't start after reset and i had to start it manualy @power button) an LG logo should apear , then an Android logo, wait about 5 - 10 min (the phone should start and you will have froyo 2.2.2. working), but if the Android LOGO stops or lags for 2,3 seconds then you must remove battery , put it back , and power on the phone. if it dose the same thing , then you must reflash your phone. Usualy it works with the battery on and simply flashing under DIAG mode.
- after reflashing if you have the same problem , you must remove battery and try installing it DIAG mode. if it still dosen't work enter emergency mode ( UP + BACK + connect USB (or press the power button)) and reflash using KDZ , MODE >>> EMERGENCY.
- when phone is connected go to COMPUTER > PROPERTIES > DEVICE MANAGER > MODEMS > and disable LGE Modem.. (some say it helps i diden't saw any difference.)
- as i was saying i killed my phone alot of times, KDZ always helped me bring it back to life , be patient.. and if you get alot of errors and flash meny times the phone gets hot , leave it to cool for a while and then try again.
be patient !! hope this will help you ..
sorry for my bad english !!
i dont mean to be rude, but there are guides on this already (i mean, how else would you know this yourself)
http://forum.xda-developers.com/showthread.php?t=1060121
http://forum.xda-developers.com/showthread.php?t=875881
sweetnsour said:
i dont mean to be rude, but there are guides on this already (i mean, how else would you know this yourself)
http://forum.xda-developers.com/showthread.php?t=1060121
http://forum.xda-developers.com/showthread.php?t=875881
Click to expand...
Click to collapse
- i understand, you'r right, but "I'm going to tell "you" how i always manneged to fix it."
PS: i wrote this tutorial after reading alot about unbricking , i tried to make it simple.
xzet2 said:
- i understand, you'r right, but "I'm going to tell "you" how i always manneged to fix it."
PS: i wrote this tutorial after reading alot about unbricking , i tried to make it simple.
Click to expand...
Click to collapse
what you posted is the exact same thing as what is posted in my links
okay , i diden't saw the detail'd tutorial with pictures , if this one is usless "someone" delete it.
no need delete
just edit ur thread with got solved or thread close something like this ~~
Thanks alot, dude. My phone is working again.
rainCz said:
Thanks alot, dude. My phone is working again.
Click to expand...
Click to collapse
well i think this one has helped someone
good luck
Bricked my phone beyond recovery
i totally bricked my phone, while i was using kdzupdater something went wrong . Finally had to go to the LG service center ( hope my warranty is not void in India). Well they said the phone is not responding to software it will need a new PCB. So my phone goes for like 2-3 days away from me.
As posted before, It's already been posted on here but great work nonetheless. It's better to have more posts like these then have more people posting about how to unbrick there phone.
Thanks for the post... I was a little unsure about flashing via KDZ, but this thread actually points few ways of procedure in case of things going wrong...
I think, this thread is pretty helpful and complements well with the others regular "how to" threads!
LG p500 Unbrick
Dear Sir,
I have lg p500, Yesterday i was downgrade my mobile software from 2.3.3 to 2.2 through KDZ updater. while updating error came finally my mobile now in dead condition, I tried to boot emergency mode (Volume UP+Back Button+USB Connect) there is no reaction on my mobile screen even though battery was removed.Any body help me to come back live my phone(I had lost my mobile purchase bill, if it is available i will give to LG service center)
xzet2 said:
Hello,
- i'm the proud owner of an LG P500, i mannaged to "kill" it alot of times, one time i bricked it so bad the power button was useless. I'm going to tell you how i always manneged to fix it.
1. - install the USB DRIVERS for LG P500 Download LINK
2. - extract the KDZ archive , install msxml.msi, Download LINK, Download Froyo 2.2.2. v10E.kdz after that open >> KDZ_FW_UPD.exe, select type 3GQCT and mode DIAG (select this only if your phone starts when you connect the USB and the battery charging logo apears) if the phone starts in Emergency Mode or dosen't start at all >> remove battery and while holding the BACK and volume UP buttons connect the USB, the phone should start in Emergency Mode, after that select in KDZ, MODE > EMERGENCY, select file > V10E_00.kdz and press the "Launch software update" .
- wait for KDZ to do it's job ( until it says FINISHED) after it is finished it will reset the phone (alot of times the phone wolden't start after reset and i had to start it manualy @power button) an LG logo should apear , then an Android logo, wait about 5 - 10 min (the phone should start and you will have froyo 2.2.2. working), but if the Android LOGO stops or lags for 2,3 seconds then you must remove battery , put it back , and power on the phone. if it dose the same thing , then you must reflash your phone. Usualy it works with the battery on and simply flashing under DIAG mode.
- after reflashing if you have the same problem , you must remove battery and try installing it DIAG mode. if it still dosen't work enter emergency mode ( UP + BACK + connect USB (or press the power button)) and reflash using KDZ , MODE >>> EMERGENCY.
- when phone is connected go to COMPUTER > PROPERTIES > DEVICE MANAGER > MODEMS > and disable LGE Modem.. (some say it helps i diden't saw any difference.)
- as i was saying i killed my phone alot of times, KDZ always helped me bring it back to life , be patient.. and if you get alot of errors and flash meny times the phone gets hot , leave it to cool for a while and then try again.
be patient !! hope this will help you ..
sorry for my bad english !!
Click to expand...
Click to collapse
Thank you for your information... Actually Today when i WAS UPDATING MY p500 FROM ROM 2.2.2 TO OFFICIAL 2.3 THROUGH KDZ,I got an error in the updating process, My phone shows only emergency mode... and after that i removed the battery and try to switch on the phone.. But my phone is seems totally dead.... I had also tried your procedure. But it wont work... Please help me how can I unbrick it..
Plz...plzz.plzzz.....
---------- Post added at 03:13 PM ---------- Previous post was at 03:08 PM ----------
sweetnsour said:
i dont mean to be rude, but there are guides on this already (i mean, how else would you know this yourself)
http://forum.xda-developers.com/showthread.php?t=1060121
http://forum.xda-developers.com/showthread.php?t=875881
Click to expand...
Click to collapse
Hello sir,
Thank you for your information... Actually Today when i WAS UPDATING MY p500 FROM ROM 2.2.2 TO OFFICIAL 2.3 THROUGH KDZ,I got an error in the updating process, My phone shows only emergency mode... and after that i removed the battery and try to switch on the phone.. But my phone is seems totally dead.... I had also tried your procedure. But it wont work... Please help me how can I unbrick it..
Plz...plzz.plzzz.....
i keep getting upgrade error
wparam:100
lparam: 502 ,
i have the optimus m , and when i connect it in emergency mode my computer AUTOMATICALLY says that there is a usb 2.0 slot avaible , and when i connect it to another it says the same thing , and i am positive that all my usbs are 2.0
Sent from my Mytouch 4G Running Capychimps Sense 3.5 rom (v.4.0)
and then KDZ force closes
Sent from my Mytouch 4G Running Capychimps Sense 3.5 rom (v.4.0)
also the phone unmounts (the screen flashes) every 25 seconds
Sent from my Mytouch 4G Running Capychimps Sense 3.5 rom (v.4.0)
---------- Post added at 04:34 PM ---------- Previous post was at 04:14 PM ----------
Heres my Log :
[16:30:43:509] : =============================================
[16:30:43:509] : Log is started on 06.01.2012, at 16:30:43:509,
executable: C:\Users\David\Desktop\KDZ_FW_UPD_EN\KDZ_FW_UPD.exe (ProcID: 0x00000a1c),
compile time : Dec 8 2010 09:19:37
[16:30:43:509] : Version :
[16:30:43:509] : Get Usb Port
[16:30:43:509] : rsi.strFriendlyName=LGE CDMA USB Serial Port (COM6)
[16:30:43:509] : FriendlyNameList[iii].szFriendlyName=LGE CDMA USB Serial Port
[16:30:43:509] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM6
[16:30:43:509] : Port = COM6
[16:30:43:525] : UNKNOWN : Req(12) -> Rsp(13)
[16:30:48:548] : RX Timeout : 5.0 seconds
[16:30:48:548] : RX TIMEOUT
[16:30:48:564] : UNKNOWN : Req(12) -> Rsp(13)
[16:30:48:564] : >> DIAG_STATUS_F FAILED
[16:30:48:579] : >>Get Model Name [DIAG_VERNO_F]
[16:30:51:606] : RX Timeout : 3.0 seconds
[16:30:51:606] : RX TIMEOUT
[16:30:51:621] : BAD CONN MODE : Req(0) -> Rsp(3)
[16:30:54:648] : RX Timeout : 3.0 seconds
[16:30:54:648] : RX TIMEOUT
[16:30:54:663] : BAD CONN MODE : Req(0) -> Rsp(3)
[16:30:57:690] : RX Timeout : 3.0 seconds
[16:30:57:690] : RX TIMEOUT
[16:30:57:705] : BAD CONN MODE : Req(0) -> Rsp(3)
[16:30:57:705] : FAIL (No Phone)
[16:30:57:705] : GetModelName() Operation Failed Check Diag CMD
[16:30:57:705] : EMERGENCY Booting Mode
[16:30:57:705] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[16:30:57:721] : 76XXT-6040-TSNCJPLYMta\Local\Temp\DZE51
[16:30:57:721] : First two character of model name is not BS
[16:30:57:721] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - No Phone
[16:30:57:721] : GetEmergencyModelName in Emergency Mode - FAILed (No Phone)
[16:30:57:721] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[16:30:57:721] : Close Port<<
[16:30:57:721] : TYPE_WPARAM_UPGRADE_ERROR
[16:30:57:752] : Log finished
then KDZ force closes .
;(
Yesterday, i've tried to go to recovery mode in powermenu [ROM CM7 nightly 1], but phone just stuck at lg logo. Then I've tried to unbrick it with KDZ. Something in first progress steps happened, and now my phone do not show any signs of life. Also I have no warranty.But i can fix it, i searched on every forum, and did not found anything, that would work. So is there any way i could unbrick my phone ?
Thanks
P.s.
And maybe i could fix it somehow using JTAG, but using arduino as that thing ? ( I don't have an arduino, but I am planing to have one)
It worked on my device , thank you:good:
xzet2 said:
Hello,
- i'm the proud owner of an LG P500, i mannaged to "kill" it alot of times, one time i bricked it so bad the power button was useless. I'm going to tell you how i always manneged to fix it.
1. - install the USB DRIVERS for LG P500 Download LINK
2. - extract the KDZ archive , install msxml.msi, Download LINK, Download Froyo 2.2.2. v10E.kdz after that open >> KDZ_FW_UPD.exe, select type 3GQCT and mode DIAG (select this only if your phone starts when you connect the USB and the battery charging logo apears) if the phone starts in Emergency Mode or dosen't start at all >> remove battery and while holding the BACK and volume UP buttons connect the USB, the phone should start in Emergency Mode, after that select in KDZ, MODE > EMERGENCY, select file > V10E_00.kdz and press the "Launch software update" .
- wait for KDZ to do it's job ( until it says FINISHED) after it is finished it will reset the phone (alot of times the phone wolden't start after reset and i had to start it manualy @power button) an LG logo should apear , then an Android logo, wait about 5 - 10 min (the phone should start and you will have froyo 2.2.2. working), but if the Android LOGO stops or lags for 2,3 seconds then you must remove battery , put it back , and power on the phone. if it dose the same thing , then you must reflash your phone. Usualy it works with the battery on and simply flashing under DIAG mode.
- after reflashing if you have the same problem , you must remove battery and try installing it DIAG mode. if it still dosen't work enter emergency mode ( UP + BACK + connect USB (or press the power button)) and reflash using KDZ , MODE >>> EMERGENCY.
- when phone is connected go to COMPUTER > PROPERTIES > DEVICE MANAGER > MODEMS > and disable LGE Modem.. (some say it helps i diden't saw any difference.)
- as i was saying i killed my phone alot of times, KDZ always helped me bring it back to life , be patient.. and if you get alot of errors and flash meny times the phone gets hot , leave it to cool for a while and then try again.
be patient !! hope this will help you ..
sorry for my bad english !!
Click to expand...
Click to collapse
after doing this my phone is not booting only
error with kdz
upgrade error
WParam : 100
LParam : 500
pls help me guys
I have one P350 and guy told me that it's flashed with "wrong" firmware.
Now it's totaly dead.
I was try to conect it to PC but nothing.
I was try vol up + vol down and connect USB but nothing.
Any help?
Thanks.
Can you do anything with it at all? For example turn it on?
Sent From This Thing Called An 'EVO 3D'
No it's totaly dead. Won't turn on, don't go to recovery mode. Nothing.
I was reading something about Medusa box and JTAG repair.
plavush said:
I have one P350 and guy told me that it's flashed with "wrong" firmware.
Now it's totaly dead.
I was try to conect it to PC but nothing.
I was try vol up + vol down and connect USB but nothing.
Any help?
Thanks.
Click to expand...
Click to collapse
Have you tried with fastboot mode? I recently bricked my lg p350 and recovery mode wasn‘t working but i was able to restore everything.
Sent from my LG-P350 using XDA App
I'm noob with that LG can you please tell me how to try that fastboot?
You need first to go in fastboot mode: from phone off you press button to start call + vol up + power button. After a bit should start the phone in fastboot mode and you need to install android sdk to be able to use adb. You should search on internet for more detailed informations.
Sent from my LG-P350 using XDA App
I was try all combination that i was found. HOME+VOL UP , CALL+VOL UP, MENU+VOL UP, VOL UP+VOL DOWN with POWER and without POWER but no luck. Nothing shown on mobile and i was try all of that with cable and computer don't recognize phone in any mode. :-(
another bricked p350
hi,plavush,i recently bricked my p350 too and he remain death no metter what i do. please ,if you have some clue how to repair it,please ,thank you.
plavush said:
I was try all combination that i was found. HOME+VOL UP , CALL+VOL UP, MENU+VOL UP, VOL UP+VOL DOWN with POWER and without POWER but no luck. Nothing shown on mobile and i was try all of that with cable and computer don't recognize phone in any mode. :-(
Click to expand...
Click to collapse
AFAIK unless you have an hardware problem if you mess up with recovery you should switch off the phone (To unsure that take off the battery and put it back) and keep pressed VOL UP+CALL and POWER until you see fastboot mode appear with few messages:
Fastboot mode started
udc_start()
It should work. At least it worked for me.
Cheers,
Gabriele
help needed
hey wat to do after that ?? i connect it to my ubuntu system and the messages of "-- suspend -- -- reset -- etc" comes up...
i am not able to communicate the phone with my laptop
ex : doing "fastboot erase recovery" just shows <waiting for device>
is there something i can tweak to make my phone to communicate with my ubuntu system... ? please help !
solved
just wrote the fastboot commands in sudo mode and it worked !
I have the same problem i tried to put custom rom on my p350 but something went wrong ,
Now i can go to fastboot mode and recovery too but i don't know what to do after that ( noob ) xD
What can i do with my PC how to unbrick my phone help me please !!!!
@jaypanda i have dual boot windows and ubuntu so if you unbricked your phone with ubuntu please tell me how to do so
SOLUTION
Ok i find the solution for this problem , for those who want to UNBRICK LG OPTIMUS ME P350 folow this short tutorial:
1.Download official lg optimus me firmware:
2.Download Kdz updater:
3.Download LG Optimus Me Drivers :
After downloading all files from above folow these steps :
1.Install all lg optimus me drivers from step 3. above
2. After instaling the drivers go to Device manager ( for windows users only )
3.Disable all LGE modem drivers (and restart your PC if u want
4.Extract KDZ_FW_UPD_EN.7z ( that you downloaded in step 2. )
5. After extracting from extracted file install msxml.msi FiRST
6. Put your phone to emergency mode to do so remove battery and put it back in the fone , then hold Volume up and Volume down buttons and power button ( hold all those buttons at the same time )
7. If you done with the step 6. on your phone screen you will see yelow background , thats good
8.plug your phone with Usb cable to your PC
9.Start KDZ_FW_UPD.exe that you downloaded and extracted in step 4.
10. choose settings : Type: 3GQCT Mode: DIAG
11.Choose your firmware that you downloaded
12. Finaly click "Launch Software Update"
13. Wait for process to finish , after that unplug your phone and power it up
OPTIONAL: If the KDZ_FW_UPD.exe won't recognize your phone remove SD Card from your phone or try to install Drivers once again , keep trying until KDZ_FW_UPD.exe recognize your phone
This tutorial work 100 % and i tested it !
Because i'm new member to the forum im not aloved to put links for downloading , if you need files for this tutorial contact me via PM , i will put the download links as soon as i get rights to do so
Good luck
P.S. Sorry about my bad English xD
^^
thanx man, you totally saved me
I'm glad i can help
hi, i have same problem with wrong fimware on my p350... but i was unable to turn it on in anny way... pls what should i doo? is there anny other solution
but my phone wont even show yelow screen
kenai666, a hard reset button does?
Hi I PM'ed u but u havent replied could you please reply or email me the links at [email protected]
mtssrbija said:
Ok i find the solution for this problem , for those who want to UNBRICK LG OPTIMUS ME P350 folow this short tutorial:
1.Download official lg optimus me firmware:
2.Download Kdz updater:
3.Download LG Optimus Me Drivers :
After downloading all files from above folow these steps :
1.Install all lg optimus me drivers from step 3. above
2. After instaling the drivers go to Device manager ( for windows users only )
3.Disable all LGE modem drivers (and restart your PC if u want
4.Extract KDZ_FW_UPD_EN.7z ( that you downloaded in step 2. )
5. After extracting from extracted file install msxml.msi FiRST
6. Put your phone to emergency mode to do so remove battery and put it back in the fone , then hold Volume up and Volume down buttons and power button ( hold all those buttons at the same time )
7. If you done with the step 6. on your phone screen you will see yelow background , thats good
8.plug your phone with Usb cable to your PC
9.Start KDZ_FW_UPD.exe that you downloaded and extracted in step 4.
10. choose settings : Type: 3GQCT Mode: DIAG
11.Choose your firmware that you downloaded
12. Finaly click "Launch Software Update"
13. Wait for process to finish , after that unplug your phone and power it up
OPTIONAL: If the KDZ_FW_UPD.exe won't recognize your phone remove SD Card from your phone or try to install Drivers once again , keep trying until KDZ_FW_UPD.exe recognize your phone
This tutorial work 100 % and i tested it !
Because i'm new member to the forum im not aloved to put links for downloading , if you need files for this tutorial contact me via PM , i will put the download links as soon as i get rights to do so
Good luck
P.S. Sorry about my bad English xD
Click to expand...
Click to collapse
I sended all files on PM CHECK PM
Sent from my Optimus Me using XDA App
Hi Guys !!!
I recently Soft Bricked My A311 and it was totally DEAD !!!!!! BUT AFTER TWO DAYS HARD WORK FINALLY GOT IT WORKING TOTALLY FINE FROM DEAD STATE !!!!
FOR BRIEFLY EXPLAINING VIDEOS N SHOWING ACTUAL FLASHING CLICK HERE
When To Use My Meathod :-
1.Not able to flash any ROM (Every Rom Fails)
2.Error Message "Unable to mount /Data" OR "Unable to mount /cache" while flashing Rom
3.Internal Storage Error "No such directory exists "
4.Unable to Boot ur device in any way
The Only Meathod I Suggest Is To Flash Stock Rom Using YGDP tool ........
BEFORE ACTUAL PROCESS FOLLOW THESE STEPS !!!!!
1.First u need to Download Micromax A310/A311 Stock Rom and YGDP tool for for this click on this link -http://androidxda.com/download-micromax-stock-rom-models
2.U need a usb cable with Standard Configuration
3.And Offcourse Ur Bricked Device
Now The Actual Process>>>>>>>
1.Unzip The Download Stock ROM rar into any directory of ur Computer(WINDOWS) and after unziping u will get a file in .CPB Format
2.Install YGDP Tool on the System by clicking next next next but Dont Run
3.Now the most Important and the most Tricky Part To Install The Device Drivers On The System...... If u already have drivers installed then u dont need to do this part...........To do this there r different methods for different OS of windows but i prefer Windows 7.......... steps r given below:
a . Go to start in Windows
b. Right click on computer and open manage
c. Device Manager will open
d. Now remove the battery of ur bricked phone and connect it to the pc via the USB Cable
e. Just on connecting usb cable hold volume down button and quickly press the power button around 10 times for system to detect
f. Then the MT65XXX divers installation will get started on the system
h. When the installtion get finished unplug the usb cable
i. Now again plug the usb cable without battery on device and u will see aditional port in device manager for 3-5 Sec named as MTXXX preloder blah blah
4. Seting Up YGDP Tool:-
a.As Installed Earlier u will see a YDGP shortcut on deskop
b.If it Stops working then dont panic Just go to application setting and set compatibility to windows 7
c.Now on opening it will ask for password ........type 369 in password and press enter
d.then the application will start
e.Now u will see a Config Icon on the left top ........Open it
f.Now a window will open with devices on left and CPB select on right .......
h.Now on right side select 8297W_I01 for A310 and for A311 select 8297W only !!!1
g.Now on right side browse the CPB file in ur system which u got on unziping the stock ROM
h.Click Apply and the CPB file check will start ........it will take aroung 2-5 Min
i.on completion u will again come on the home page ...
j.Now on the left top side of the application u will see Start icon ......click on it
k.Now connect ur bricked device via usb cable without battery and in power off state
l.Now if everything went correct then the Cell 0 icon will change into downloading icon ......it means ur phone is detected
m.Flashing will automatically start and will take around 5min
n. On completion the Cell 0 will become 100%
o. Unplug usb cable
p. REBBOOT DEVICE!!!!!!
CONGRATES UR DEVICE WILL RISE FROM THE DEAD !!!!! ENJOY !!!!!!!
AND DONT FORGET TO HIT THANKS IF I HELPED
not working
amitsharad7 said:
Hi Guys !!!
I recently Soft Bricked My A311 and it was totally DEAD !!!!!! BUT AFTER TWO DAYS HARD WORK FINALLY GOT IT WORKING TOTALLY FINE FROM DEAD STATE !!!!
I WILL UPLOAD A VIDEO ON YOUTUBE OF WHOLE PROCESS SOON
When To Use My Meathod :-
1.Not able to flash any ROM (Every Rom Fails)
2.Error Message "Unable to mount /Data" OR "Unable to mount /cache" while flashing Rom
3.Internal Storage Error "No such directory exists "
4.Unable to Boot ur device in any way
The Only Meathod I Suggest Is To Flash Stock Rom Using YGDP tool ........
BEFORE ACTUAL PROCESS FOLLOW THESE STEPS !!!!!
1.First u need to Download Micromax A310/A311 Stock Rom
a. For A310 Stock ROM ....Download From NEEDROM
b. For A311 Stock ROM .....Download From NEEDROM
2.Now Download YGDP FLASH TOOL from NEEDROM MICROMAX A311 SECTION THERE U WILL FIND THE DOWNOAD OPTION OR SEARCH WEB (JUST DOWNLOAD THE TOOL)
3.U need a usb cable with Standard Configuration
4.And Offcourse Ur Bricked Device
Now The Actual Process>>>>>>>
1.Unzip The Download Stock ROM rar into any directory of ur Computer(WINDOWS) and after unziping u will get a file in .CPB Format
2.Install YGDP Tool on the System by clicking next next next but Dont Run
3.Now the most Important and the most Tricky Part To Install The Device Drivers On The System...... If u already have drivers installed then u dont need to do this part...........To do this there r different methods for different OS of windows but i prefer Windows 7.......... steps r given below:
a . Go to start in Windows
b. Right click on computer and open manage
c. Device Manager will open
d. Now remove the battery of ur bricked phone and connect it to the pc via the USB Cable
e. Just on connecting usb cable hold volume down button and quickly press the power button around 10 times for system to detect
f. Then the MT65XXX divers installation will get started on the system
h. When the installtion get finished unplug the usb cable
i. Now again plug the usb cable without battery on device and u will see aditional port in device manager for 3-5 Sec named as MTXXX preloder blah blah
4. Seting Up YGDP Tool:-
a.As Installed Earlier u will see a YDGP shortcut on deskop
b.If it Stops working then dont panic Just go to application setting and set compatibility to windows 7
c.Now on opening it will ask for password ........type 369 in password and press enter
d.then the application will start
e.Now u will see a Config Icon on the left top ........Open it
f.Now a window will open with devices on left and CPB select on right .......
h.Now on right side select 8297W_I01 for A310 and for A311 select 8297W only !!!1
g.Now on right side browse the CPB file in ur system which u got on unziping the stock ROM
h.Click Apply and the CPB file check will start ........it will take aroung 2-5 Min
i.on completion u will again come on the home page ...
j.Now on the left top side of the application u will see Start icon ......click on it
k.Now connect ur bricked device via usb cable without battery and in power off state
l.Now if everything went correct then the Cell 0 icon will change into downloading icon ......it means ur phone is detected
m.Flashing will automatically start and will take around 5min
n. On completion the Cell 0 will become 100%
o. Unplug usb cable
p. REBBOOT DEVICE!!!!!!
CONGRATES UR DEVICE WILL RISE FROM THE DEAD !!!!! ENJOY !!!!!!!
IF U FACE ANY PROBLEM ANYWHERE AND WHATSAPP ME OR CALL ME EVEN ON 9927445068 BECAUSE I KNOW KI JAB PHONE BRICK HOTA HE TOH KITNE FHATI HE!!!!
AND DONT FORGET TO HIT THANKS IF I HELPED
Click to expand...
Click to collapse
i also bricked my nitro a311.... all checked all the step above.. but it stuck at the entering download mode .. nothing happens after thst..
please help me
I can't install the driver thats my prolem
Help me
Refer this
Ben02 said:
I can't install the driver thats my prolem
Help me
Click to expand...
Click to collapse
bro i had explained in detail .. you can visit it here...
http://forum.xda-developers.com/a310/help/solved-unbricked-a311-a310-nitro-t3187580
got stsuck
A311.. entering download mode... got stuck here help me help me!.. please
bro .. you can try to flash the stock ROM.... I will surely fix the problem... refer the link given in above reply
Thanks for your help. It might be so help ful for everyone
Sent from my Micromax A311 using XDA Free mobile app
My computer didn't detect my a311.So what can I do??? Pls help me...I have vcom,sp tool drivers and more
Sent from my Micromax A311
thanks for the procedure
fails in ygdp @ 83 percent everytime
ygdp tool fails while downloading the cpb
:crying::crying: a311
I m facing a problem. It stuck in 98%. I cant flash the rom. I download the rom and ygdp tool and install drivers successfully. After i choose 8297w for my a311 and select the cpb file. It unzib the file and so on. Then i select start the cell 0 is entered in download mode and stuck in 98%. Please help me buddy
moulishankar said:
I m facing a problem. It stuck in 98%. I cant flash the rom. I download the rom and ygdp tool and install drivers successfully. After i choose 8297w for my a311 and select the cpb file. It unzib the file and so on. Then i select start the cell 0 is entered in download mode and stuck in 98%. Please help me buddy
Click to expand...
Click to collapse
I'm too stuck with the same issue. But I've some what positive progress. It shows in 25 secs the failure message. So please help me too!!
Note: complete history of my case can be found here!
Thanks It works
Thanks for the post it saved me a lot troubles. .Had trouble finding free MT65XX. Please donwlaod it from by searching "SP flash tool + mediatek" mt65xx.
amitsharad7 said:
Hi Guys !!!
I recently Soft Bricked My A311 and it was totally DEAD !!!!!! BUT AFTER TWO DAYS HARD WORK FINALLY GOT IT WORKING TOTALLY FINE FROM DEAD STATE !!!!
FOR BRIEFLY EXPLAINING VIDEOS N SHOWING ACTUAL FLASHING CLICK HERE
When To Use My Meathod :-
1.Not able to flash any ROM (Every Rom Fails)
2.Error Message "Unable to mount /Data" OR "Unable to mount /cache" while flashing Rom
3.Internal Storage Error "No such directory exists "
4.Unable to Boot ur device in any way
The Only Meathod I Suggest Is To Flash Stock Rom Using YGDP tool ........
BEFORE ACTUAL PROCESS FOLLOW THESE STEPS !!!!!
1.First u need to Download Micromax A310/A311 Stock Rom and YGDP tool for for this click on this link -http://androidxda.com/download-micromax-stock-rom-models
2.U need a usb cable with Standard Configuration
3.And Offcourse Ur Bricked Device
Now The Actual Process>>>>>>>
1.Unzip The Download Stock ROM rar into any directory of ur Computer(WINDOWS) and after unziping u will get a file in .CPB Format
2.Install YGDP Tool on the System by clicking next next next but Dont Run
3.Now the most Important and the most Tricky Part To Install The Device Drivers On The System...... If u already have drivers installed then u dont need to do this part...........To do this there r different methods for different OS of windows but i prefer Windows 7.......... steps r given below:
a . Go to start in Windows
b. Right click on computer and open manage
c. Device Manager will open
d. Now remove the battery of ur bricked phone and connect it to the pc via the USB Cable
e. Just on connecting usb cable hold volume down button and quickly press the power button around 10 times for system to detect
f. Then the MT65XXX divers installation will get started on the system
h. When the installtion get finished unplug the usb cable
i. Now again plug the usb cable without battery on device and u will see aditional port in device manager for 3-5 Sec named as MTXXX preloder blah blah
4. Seting Up YGDP Tool:-
a.As Installed Earlier u will see a YDGP shortcut on deskop
b.If it Stops working then dont panic Just go to application setting and set compatibility to windows 7
c.Now on opening it will ask for password ........type 369 in password and press enter
d.then the application will start
e.Now u will see a Config Icon on the left top ........Open it
f.Now a window will open with devices on left and CPB select on right .......
h.Now on right side select 8297W_I01 for A310 and for A311 select 8297W only !!!1
g.Now on right side browse the CPB file in ur system which u got on unziping the stock ROM
h.Click Apply and the CPB file check will start ........it will take aroung 2-5 Min
i.on completion u will again come on the home page ...
j.Now on the left top side of the application u will see Start icon ......click on it
k.Now connect ur bricked device via usb cable without battery and in power off state
l.Now if everything went correct then the Cell 0 icon will change into downloading icon ......it means ur phone is detected
m.Flashing will automatically start and will take around 5min
n. On completion the Cell 0 will become 100%
o. Unplug usb cable
p. REBBOOT DEVICE!!!!!!
CONGRATES UR DEVICE WILL RISE FROM THE DEAD !!!!! ENJOY !!!!!!!
AND DONT FORGET TO HIT THANKS IF I HELPED
Click to expand...
Click to collapse
Great work... and very nice explanation.... keep goingg....
@moulishankar @sugarmurali
What did u do next after YGDP stuck at 98% for A311?
Andy5.1 said:
@[email protected]
What did u do next after YGDP stuck at 98% for A311?
Click to expand...
Click to collapse
Shut down and close computer thats all
someone please help me....i followed all the above steps but not getting success. The moment i click on Start nothing happens, it just says Entering Download mode and nothing happens. Please help me !!!
+91 9920778298 - Please help me !!!
still stuck on micromax logo after flashing 100%
hi please i have flashed rom via ygdp it shows 100% success but when i boot my a311 it stuck on micromax logo and i have also tried factory mode fix but after commanding ADB Shell it promt no device found.. Plz help me thanks in advance
Bricked micromax canvas a 311
My micromax canvas is not detecting in my system, I have installed all drivers manually. Some time it is stuck in bootloop, some times it get booted to a black screen and shows up setting stopped. But I can boot into recovery mode. Some one please tell me how to flash from memory card. No driver like adb or vcom detects my phone. I tried flash using fastboot mode but it is not detected. Please someone tells me a solution
My phone not turn on
I tried to install TWRP and got it, but then it did not power on anymore, and I connected to the pc and it turns off and on as you would to disconnect the cable and reconnect
Need Help please
My phone is Alcatel Pixi 3 (4013x)
my phone not turn on anymore
What you can try is this:
You can get the original firmware for this phone (just a quick google search) but make sure its sp flash tools flashable then extract the file with all the firmware
Then type in google: Alcatel pixi 3 (4) vcom drivers and then download them
Then extract the drivers to a place you can remember
Then press windows key + R
Type in devmgmt.msc
Then once device manager opens select a driver section such as ports (COM & LPT)
Then go to action, add legacy hardware
Then select the driver .inf you extracted earlier
Then once its Installed it will go to a screen where it says "the device cannot start (code 10)" just ignore it that's normal
Then open spflashtools and then select the scatter.txt in the firmware it should be something like "MT6580_Android_Scatter.txt" or different
Then it should load up all the partitions for flashing
Then click start keep your phone plugged in and if it says "Download DA 100%" with a red bar you've got it all right
Now all you have to do is wait....
And after 8 minutes (that's how long it took me to flash my Alcatel pixi 4) you have a working phone!
P.S: if you get "DA didn't send any data" that means you installed the drivers wrong or you don't have enough charge in your battery, just charge the battery and try to reflash the firmware and you should be able to flash the firmware!
Dear android developers and hackers
i apply ota update after flashing stock rom using ygdp tool.
After its stucking in bootloop .
Cannot enter in to recovery mode by presssing hard keys.
Cannot connect to laptop it does not showing a device.
I cannot a flash a twrp in adb device comands. It shows no device found and no emulators found.
What can i do
kindly give me soluation .
I have only one mobile
Hi , try to uninstall all drivers for your device using USB Deview , once you do that Reboot your device , take battery off , hold power button about one minut , reinsert the battery , hold vol + and plug usb in if is not recognised then try on another usb port or another usb port. If that doesn't work press both vol + and vol - and see if is recognised .
Download from here : (scroll down )
https://www.nirsoft.net/utils/usb_devices_view.html