Dear android developers and hackers
i apply ota update after flashing stock rom using ygdp tool.
After its stucking in bootloop .
Cannot enter in to recovery mode by presssing hard keys.
Cannot connect to laptop it does not showing a device.
I cannot a flash a twrp in adb device comands. It shows no device found and no emulators found.
What can i do
kindly give me soluation .
I have only one mobile
Hi , try to uninstall all drivers for your device using USB Deview , once you do that Reboot your device , take battery off , hold power button about one minut , reinsert the battery , hold vol + and plug usb in if is not recognised then try on another usb port or another usb port. If that doesn't work press both vol + and vol - and see if is recognised .
Download from here : (scroll down )
https://www.nirsoft.net/utils/usb_devices_view.html
Related
I have one P350 and guy told me that it's flashed with "wrong" firmware.
Now it's totaly dead.
I was try to conect it to PC but nothing.
I was try vol up + vol down and connect USB but nothing.
Any help?
Thanks.
Can you do anything with it at all? For example turn it on?
Sent From This Thing Called An 'EVO 3D'
No it's totaly dead. Won't turn on, don't go to recovery mode. Nothing.
I was reading something about Medusa box and JTAG repair.
plavush said:
I have one P350 and guy told me that it's flashed with "wrong" firmware.
Now it's totaly dead.
I was try to conect it to PC but nothing.
I was try vol up + vol down and connect USB but nothing.
Any help?
Thanks.
Click to expand...
Click to collapse
Have you tried with fastboot mode? I recently bricked my lg p350 and recovery mode wasn‘t working but i was able to restore everything.
Sent from my LG-P350 using XDA App
I'm noob with that LG can you please tell me how to try that fastboot?
You need first to go in fastboot mode: from phone off you press button to start call + vol up + power button. After a bit should start the phone in fastboot mode and you need to install android sdk to be able to use adb. You should search on internet for more detailed informations.
Sent from my LG-P350 using XDA App
I was try all combination that i was found. HOME+VOL UP , CALL+VOL UP, MENU+VOL UP, VOL UP+VOL DOWN with POWER and without POWER but no luck. Nothing shown on mobile and i was try all of that with cable and computer don't recognize phone in any mode. :-(
another bricked p350
hi,plavush,i recently bricked my p350 too and he remain death no metter what i do. please ,if you have some clue how to repair it,please ,thank you.
plavush said:
I was try all combination that i was found. HOME+VOL UP , CALL+VOL UP, MENU+VOL UP, VOL UP+VOL DOWN with POWER and without POWER but no luck. Nothing shown on mobile and i was try all of that with cable and computer don't recognize phone in any mode. :-(
Click to expand...
Click to collapse
AFAIK unless you have an hardware problem if you mess up with recovery you should switch off the phone (To unsure that take off the battery and put it back) and keep pressed VOL UP+CALL and POWER until you see fastboot mode appear with few messages:
Fastboot mode started
udc_start()
It should work. At least it worked for me.
Cheers,
Gabriele
help needed
hey wat to do after that ?? i connect it to my ubuntu system and the messages of "-- suspend -- -- reset -- etc" comes up...
i am not able to communicate the phone with my laptop
ex : doing "fastboot erase recovery" just shows <waiting for device>
is there something i can tweak to make my phone to communicate with my ubuntu system... ? please help !
solved
just wrote the fastboot commands in sudo mode and it worked !
I have the same problem i tried to put custom rom on my p350 but something went wrong ,
Now i can go to fastboot mode and recovery too but i don't know what to do after that ( noob ) xD
What can i do with my PC how to unbrick my phone help me please !!!!
@jaypanda i have dual boot windows and ubuntu so if you unbricked your phone with ubuntu please tell me how to do so
SOLUTION
Ok i find the solution for this problem , for those who want to UNBRICK LG OPTIMUS ME P350 folow this short tutorial:
1.Download official lg optimus me firmware:
2.Download Kdz updater:
3.Download LG Optimus Me Drivers :
After downloading all files from above folow these steps :
1.Install all lg optimus me drivers from step 3. above
2. After instaling the drivers go to Device manager ( for windows users only )
3.Disable all LGE modem drivers (and restart your PC if u want
4.Extract KDZ_FW_UPD_EN.7z ( that you downloaded in step 2. )
5. After extracting from extracted file install msxml.msi FiRST
6. Put your phone to emergency mode to do so remove battery and put it back in the fone , then hold Volume up and Volume down buttons and power button ( hold all those buttons at the same time )
7. If you done with the step 6. on your phone screen you will see yelow background , thats good
8.plug your phone with Usb cable to your PC
9.Start KDZ_FW_UPD.exe that you downloaded and extracted in step 4.
10. choose settings : Type: 3GQCT Mode: DIAG
11.Choose your firmware that you downloaded
12. Finaly click "Launch Software Update"
13. Wait for process to finish , after that unplug your phone and power it up
OPTIONAL: If the KDZ_FW_UPD.exe won't recognize your phone remove SD Card from your phone or try to install Drivers once again , keep trying until KDZ_FW_UPD.exe recognize your phone
This tutorial work 100 % and i tested it !
Because i'm new member to the forum im not aloved to put links for downloading , if you need files for this tutorial contact me via PM , i will put the download links as soon as i get rights to do so
Good luck
P.S. Sorry about my bad English xD
^^
thanx man, you totally saved me
I'm glad i can help
hi, i have same problem with wrong fimware on my p350... but i was unable to turn it on in anny way... pls what should i doo? is there anny other solution
but my phone wont even show yelow screen
kenai666, a hard reset button does?
Hi I PM'ed u but u havent replied could you please reply or email me the links at [email protected]
mtssrbija said:
Ok i find the solution for this problem , for those who want to UNBRICK LG OPTIMUS ME P350 folow this short tutorial:
1.Download official lg optimus me firmware:
2.Download Kdz updater:
3.Download LG Optimus Me Drivers :
After downloading all files from above folow these steps :
1.Install all lg optimus me drivers from step 3. above
2. After instaling the drivers go to Device manager ( for windows users only )
3.Disable all LGE modem drivers (and restart your PC if u want
4.Extract KDZ_FW_UPD_EN.7z ( that you downloaded in step 2. )
5. After extracting from extracted file install msxml.msi FiRST
6. Put your phone to emergency mode to do so remove battery and put it back in the fone , then hold Volume up and Volume down buttons and power button ( hold all those buttons at the same time )
7. If you done with the step 6. on your phone screen you will see yelow background , thats good
8.plug your phone with Usb cable to your PC
9.Start KDZ_FW_UPD.exe that you downloaded and extracted in step 4.
10. choose settings : Type: 3GQCT Mode: DIAG
11.Choose your firmware that you downloaded
12. Finaly click "Launch Software Update"
13. Wait for process to finish , after that unplug your phone and power it up
OPTIONAL: If the KDZ_FW_UPD.exe won't recognize your phone remove SD Card from your phone or try to install Drivers once again , keep trying until KDZ_FW_UPD.exe recognize your phone
This tutorial work 100 % and i tested it !
Because i'm new member to the forum im not aloved to put links for downloading , if you need files for this tutorial contact me via PM , i will put the download links as soon as i get rights to do so
Good luck
P.S. Sorry about my bad English xD
Click to expand...
Click to collapse
I sended all files on PM CHECK PM
Sent from my Optimus Me using XDA App
My phone is royally stuffed now. A few days ago, it started showing error message (image) and this morning after a restart, its stuck at the green android logo and won't get into the operating system. I tried the following and didn't work:
- remove sd card, battery both sim cards
- press vol+ and insert into my computer's usb slot
- MT65xx preloader appeared briefly (about 3 secs) in Device Manager and disappear. Too brief for me to do anything
I also tried power and vol+ buttons to get into recovery but I only get a dead Android image with "No Command" message (similar to image).
Before this problem, my computer can connect to my phone fine and I am using ADB_usb_driver_120827 and successfully rooted it about 2 months ago.
I can try something if my computer can hold the USB connection but how to get a USB connection? Please help?
OK my computer can see my phone as an ADB Interface but I still can't connect MTK Tools or SP Flash to it. Any help?
dreamerman said:
OK my computer can see my phone as an ADB Interface but I still can't connect MTK Tools or SP Flash to it. Any help?
Click to expand...
Click to collapse
Connect to the same port you used for root....
Hold only vol up (may be down)
Reinstall drivers....
Follow more methods @ unbrick mt 6577 it may help....
Sent from my IRIS_501 using xda premium
akash akya said:
Connect to the same port you used for root....
Hold only vol up (may be down)
Reinstall drivers....
Follow more methods @ unbrick mt 6577 it may help....
Click to expand...
Click to collapse
Thanks for your help. I fixed it by entering into recovery mode and factory reset it.
hi..is there anybody can help me...
i got phone model 'ninetology insight' i9430.
it got brick during flash because usb disconnect..it doesn't shows anything...even charging..no display anything..cant turn it on..
hope somebody can help me with this problem..
can you get into bootloader or recovery, or see it via adb?
pavlpavel said:
can you get into bootloader or recovery, or see it via adb?
Click to expand...
Click to collapse
nope..
cant connect to pc either..when i try plug in using usb, nothing happen..
can help me how to connect to pc? thank you
Tab Bricked....Help
I used Swingtel HelloTab 16GB it bricked stuck on Boot LOGO
its CHIP is E720_SIGN & Processor is Qualcomm Powered Intelligent
pleas help me to install CWM & ROM Mathod
its not going to boot recovery MODE
its only BOOT with Vol+ & Power Button in DOWNLOAD MODE and
BOOT into Vol- & power Button in Fastboot Mode
how to Boot into recovery Mode Please HELP
I hope this helps, it happends to me when the 1st-5th time i install the Img file using LiveSuite
try to install USBDeview here the link ->tomsguidedotcom/us/download/USBDeview,0313-13254dothtml
(just retype the dot = "." , can post link here coz im new.
1. open Device Manager and USBDeview
2. click on "Created Date" on upper right of the program
3. uninstall all USB driver the date after the port hud driver (VID_1f3a_PID_efe8) on USBDeview. wait for the Device manager to install the important driver u accidentally uninstall.
4. hold power botton for at least 30 sec
5. run livesuit.exe, select your img file. connect the usb to the PC or laptop
6. while hold volume up insert the usb cable in the andriod device you have.
7. while holding the volume key, press power botton at least 2 sec, 4-5 times.
8.if unknow device show just install manually the usb driver in the livesuit folder using Device Manager (Update DriverSoftware->Browse my 9. Computer for Driver Software-> Let me Pick from the list of device -> Have Disk -> Browse (Go to the LiveSuit Folder click the *.inf driver in usb driver folder) just click ok
9. w8 for the LiveSuit to react. if nothing happend, reapeat Step 4.
10 click on "Created Date" on upper right of USBdeview, check if port hud driver (VID_1f3a_PID_efe8) turn "GREEN" mean conneted . this you click "Yes" on the LiveSuit option given.
Hope This one Help. Good luk!
rkillahph said:
I hope this helps, it happends to me when the 1st-5th time i install the Img file using LiveSuite
try to install USBDeview here the link ->tomsguidedotcom/us/download/USBDeview,0313-13254dothtml
(just retype the dot = "." , can post link here coz im new.
1. open Device Manager and USBDeview
2. click on "Created Date" on upper right of the program
3. uninstall all USB driver the date after the port hud driver (VID_1f3a_PID_efe8) on USBDeview. wait for the Device manager to install the important driver u accidentally uninstall.
4. hold power botton for at least 30 sec
5. run livesuit.exe, select your img file. connect the usb to the PC or laptop
6. while hold volume up insert the usb cable in the andriod device you have.
7. while holding the volume key, press power botton at least 2 sec, 4-5 times.
8.if unknow device show just install manually the usb driver in the livesuit folder using Device Manager (Update DriverSoftware->Browse my 9. Computer for Driver Software-> Let me Pick from the list of device -> Have Disk -> Browse (Go to the LiveSuit Folder click the *.inf driver in usb driver folder) just click ok
9. w8 for the LiveSuit to react. if nothing happend, reapeat Step 4.
10 click on "Created Date" on upper right of USBdeview, check if port hud driver (VID_1f3a_PID_efe8) turn "GREEN" mean conneted . this you click "Yes" on the LiveSuit option given.
Hope This one Help. Good luk!
Click to expand...
Click to collapse
i already try your method..but seems nothing happen...still my android cant connect to pc..
i just only need to connect to pc only..only that way i can solve my problem..thanks anyway..
sigh..
i think because i flash a wrong recovery then my phone brick...
xhitgirlx said:
i think because i flash a wrong recovery then my phone brick...
Click to expand...
Click to collapse
*is there any indication in ur device manager that u are connected wen u plug in the device?
*what usb cable are u using? try using another usb cable with complete pins.
rkillahph said:
*is there any indication in ur device manager that u are connected wen u plug in the device?
*what usb cable are u using? try using another usb cable with complete pins.
Click to expand...
Click to collapse
i try already another usb cable..nothing happen also..i dont know why..
it's like when you plug in your device to the pc nothing happen...
it means no device connected at the pc.
i think no body can help me in this situation..even the developers...thank you.:good:
Hello
Today today i was installing this rom and my phone is now bricked. It stucks on loading boot logo.
Now I'm trying to unbrick my phone following this guide but i have a problem.
I put my phone into Downloading mode (Volume Up+Volume Down+Power Button) , run Odin as administrator , but when i connect USB cable to PC , odin wont recognize my phone.
After connecting phone with PC , windows finds new device but it wont download drivers for it.
Here's screenshot of my Device Manager http://i.imgur.com/Dc4p7j2.png
When i right click the device and I try to update the driver using drivers i found on this site http://i.imgur.com/whLaWzJ.png
This happens http://i.imgur.com/rrPRjTj.png
edit// Fixed, delete thread please , cant find how to delete topic . sorry
I brought lyf wind 6, i used that phone for a year but now after i update that phone, it show '' system error : The phone has been locked because flashed with an unauthorized software '' and not booting, it only boot into recovery again and again, i update that phone with in update app which is in the settings. Now please help me what can i do, i try to flash stock rom with Qualcomm flash tool but it not connecting with pc. So please help me, how i can repair my phone, please help me.....
Thank you, if you will help me!!
Piyush4444 said:
I brought lyf wind 6, i used that phone for a year but now after i update that phone, it show '' system error : The phone has been locked because flashed with an unauthorized software '' and not booting, it only boot into recovery again and again, i update that phone with in update app which is in the settings. Now please help me what can i do, i try to flash stock rom with Qualcomm flash tool but it not connecting with pc. So please help me, how i can repair my phone, please help me.....
Thank you, if you will help me!!
Click to expand...
Click to collapse
Hi , make sure your device is off , now press and hold VOL + i VOl - an plug your device on pc using USB cable , just keep holding like that and see if the device is getting recognised on your PC rest is to reflash stock firmware ...
Make sure that System Update is set to ON on your PC .
Good Luck
Teddy Lo said:
Hi , make sure your device is off , now press and hold VOL + i VOl - an plug your device on pc using USB cable , just keep holding like that and see if the device is getting recognised on your PC rest is to reflash stock firmware ...
Make sure that System Update is set to ON on your PC .
Good Luck
Click to expand...
Click to collapse
Yep, I have successed to enter the system, but there is another problem; if i flash magisk and logging to google account , i cannot reboot to the system and an error occur shows "custom binary block by frp block, system error : The phone has been locked because flashed with an unauthorized software", does it mean that i cannot flash the magisk and logging the account at the same time?
Sorry not so techy do you mean volume up and volume down or is it the usual reboot keys vol up, power and home button?
QUOTE=Teddy Lo;76872909]Hi , make sure your device is off , now press and hold VOL + i VOl - an plug your device on pc using USB cable , just keep holding like that and see if the device is getting recognised on your PC rest is to reflash stock firmware ...
Make sure that System Update is set to ON on your PC .
Good Luck [/QUOTE]
Hi. i have Coolpad C3701A. Is there a way to flash firmware on this device? My Revvl Plus only boots to Security Error Message:: 101 "This device has been flashed with unauthorized software". Here is a link to how it looks... By the way, I cant find drivers or firmware. Can someone point me in the right durection...?