Hello,
I use the data on your link to install the custom ROM:
http://forum.xda-developers.com/moto-z/development/rom-cyanogenmod14-1-moto-z-t3514432/page14
Now the install is done but the phone stuc on the page written "your device has been unlocked and can't be trusted lock"
The phone keeps reboot and can boot to the main android page.
How can I unstuck my phone?
Thankyou.
xav12358 said:
Hello,
I use the data on your link to install the custom ROM:
http://forum.xda-developers.com/moto-z/development/rom-cyanogenmod14-1-moto-z-t3514432/page14
Now the install is done but the phone stuc on the page written "your device has been unlocked and can't be trusted lock"
The phone keeps reboot and can boot to the main android page.
How can I unstuck my phone?
Thankyou.
Click to expand...
Click to collapse
Were you on android 7.0 before installing? If so that's why and you'll have to flash stock android 7.0. Unless I've missed something there's no way to downgrade and no way to flash that ROM on the new bootloader in android 7.0
supacrazyguy42 said:
Were you on android 7.0 before installing? If so that's why and you'll have to flash stock android 7.0. Unless I've missed something there's no way to downgrade and no way to flash that ROM on the new bootloader in android 7.0
Click to expand...
Click to collapse
My previous version was android 6.0. Is there a reason why this don't work properly?
xav12358 said:
My previous version was android 6.0. Is there a reason why this don't work properly?
Click to expand...
Click to collapse
I'm not sure then if you were on android 6.0.1, it seems someone is having a similar issue on the original thread, I'd ask there. Perhaps it's a problem with a certain version of the ROM.
How can I check the previous version of android ?
Related
Hello. I am currently on Alpha HC 6.0 and would like to update to 7.1 that just came out. Do I need to back up 6.0 using CWM and then install update.zip to go to 7.1? Or do I have to nvflash back to original and then do wipe/cache/dalvik and then install 7.1?
I am not sure if going from 6.0 to 7.1 requires to wipe/cache/dalvik everytime or just run the new update.zip and reboot w/o doing wipes/dalvik?
Just want to be sure before doing the update. Thanks in advance.
gtabrocks said:
Hello. I am currently on Alpha HC 6.0 and would like to update to 7.1 that just came out. Do I need to back up 6.0 using CWM and then install update.zip to go to 7.1? Or do I have to nvflash back to original and then do wipe/cache/dalvik and then install 7.1?
I am not sure if going from 6.0 to 7.1 requires to wipe/cache/dalvik everytime or just run the new update.zip and reboot w/o doing wipes/dalvik?
Just want to be sure before doing the update. Thanks in advance.
Click to expand...
Click to collapse
Ask in the thred for the rom you are using. Better yet, read that thread, your answer is probably already there.
TJEvans said:
Ask in the thred for the rom you are using. Better yet, read that thread, your answer is probably already there.
Click to expand...
Click to collapse
OK..thanks. I will search and post on the thread for that ROM.
Hello, I also have same quesetion. I use stock ROM 4349 to upgrade to backflash 6.0. It looks easy just copy command into recover folder and update in root. Then, go to recover mode and Gtablet do the updates automatically without any problem.
When I try to use same method for alpha 7.1, it brick the gtablet. I need to use NVflash to do it again. Do anyone know how to upgrade it correctly. BTW, when I install CWMOD form 4349 stock ROM, it fail and I will hang on the recovery mode. Anyone can help?
I've been messing with this all day, to no avail.
When I first got my M8, I unlocked it and installed Android Revolution HD 7.0. As part of the process, I created a backup of the stock ROM.
Everything worked fine until I decided today that I wanted to update to a custom ROM with Lollipop. I tried the newest version of Android Revolution HD and SkyDragon, several times each, and every time it got stuck on the boot screen. The only way I can fix it is restoring to the stock ROM.
As part of my troubleshooting process today, I went from S-ON to S-OFF and changed my CID. Still, nothing worked.
I also tried to update my recovery to a newer version of TWRP and broke it for a while. Mysteriously, when I tried to install CWM from the Play app, it ended up restoring my old version of TWRP.
I downloaded an older (pre-Lollipop) version of Android Revolution and tried to install that to get back to what I was used to, but that was unsuccessful as well.
Can someone please walk me through this process?
MostlyTherapeutic said:
I've been messing with this all day, to no avail.
When I first got my M8, I unlocked it and installed Android Revolution HD 7.0. As part of the process, I created a backup of the stock ROM.
Everything worked fine until I decided today that I wanted to update to a custom ROM with Lollipop. I tried the newest version of Android Revolution HD and SkyDragon, several times each, and every time it got stuck on the boot screen. The only way I can fix it is restoring to the stock ROM.
As part of my troubleshooting process today, I went from S-ON to S-OFF and changed my CID. Still, nothing worked.
I also tried to update my recovery to a newer version of TWRP and broke it for a while. Mysteriously, when I tried to install CWM from the Play app, it ended up restoring my old version of TWRP.
I downloaded an older (pre-Lollipop) version of Android Revolution and tried to install that to get back to what I was used to, but that was unsuccessful as well.
Can someone please walk me through this process?
Click to expand...
Click to collapse
Are you one the latest firmware for your device ?
Tigerstown said:
Are you one the latest firmware for your device ?
Click to expand...
Click to collapse
I don't think so. I'm on 4.4.2. I tried upgrading to 4.4.4 with the instructions from another thread, but had issues with that as well.
MostlyTherapeutic said:
I don't think so. I'm on 4.4.2. I tried upgrading to 4.4.4 with the instructions from another thread, but had issues with that as well.
Click to expand...
Click to collapse
You need to update your firmware 1st off. Do you recall your error when you were flashing firmware?
Tigerstown said:
You need to update your firmware 1st off. Do you recall your error when you were flashing firmware?
Click to expand...
Click to collapse
I used this thread that you linked previously: http://forum.xda-developers.com/att-htc-one-m8/general/att-4-4-4-firmware-signed-encrypted-t3031703
The first ZIP was corrupted, even after a second download.
I don't recall the error on the stripped down one, but I can mess with it again later today.
Do you have any other links for the firmware?
So if I need to install 4.44 before changing ROMs, do I also need to install 5.0 separately?
MostlyTherapeutic said:
I used this thread that you linked previously: http://forum.xda-developers.com/att-htc-one-m8/general/att-4-4-4-firmware-signed-encrypted-t3031703
The first ZIP was corrupted, even after a second download.
I don't recall the error on the stripped down one, but I can mess with it again later today.
Do you have any other links for the firmware?
So if I need to install 4.44 before changing ROMs, do I also need to install 5.0 separately?
Click to expand...
Click to collapse
Yes I got a s-off firmware link that will flash if you are doing it correct. I'm at work now when I go on lunch I'll send you it
---------- Post added at 11:28 AM ---------- Previous post was at 10:53 AM ----------
MostlyTherapeutic said:
I used this thread that you linked previously: http://forum.xda-developers.com/att-htc-one-m8/general/att-4-4-4-firmware-signed-encrypted-t3031703
The first ZIP was corrupted, even after a second download.
I don't recall the error on the stripped down one, but I can mess with it again later today.
Do you have any other links for the firmware?
So if I need to install 4.44 before changing ROMs, do I also need to install 5.0 separately?
Click to expand...
Click to collapse
Here is a 4.4.4 Att firmware.zip. download an flash using fastboot. It works I know I used it last night when repairing a phone.. So after you flash firmware an it updates let me know or if you can't fastboot for some reason.
https://www.androidfilehost.com/?fid=95916177934529541
Tigerstown said:
Yes I got a s-off firmware link that will flash if you are doing it correct. I'm at work now when I go on lunch I'll send you it
---------- Post added at 11:28 AM ---------- Previous post was at 10:53 AM ----------
Here is a 4.4.4 Att firmware.zip. download an flash using fastboot. It works I know I used it last night when repairing a phone.. So after you flash firmware an it updates let me know or if you can't fastboot for some reason.
-snip due to new user restriction-
Click to expand...
Click to collapse
Woo, it worked this time! I almost thought it was stuck again, but it managed to get through.
I'm on a custom ROM with 4.4.4 now. What do I need to do to get up to 5.0? Do I just flash a 5.0 ROM, or do you have a 5.0 firmware that I flash first?
MostlyTherapeutic said:
Woo, it worked this time! I almost thought it was stuck again, but it managed to get through.
I'm on a custom ROM with 4.4.4 now. What do I need to do to get up to 5.0? Do I just flash a 5.0 ROM, or do you have a 5.0 firmware that I flash first?
Click to expand...
Click to collapse
Idk of hand if there is lollipop firmware for Att as I'm not a Att user just helping out. So either try an flash a device compatible ROM an see what happens or see if there is L firmware but it should work on 4.4.4 firmware. Should that is. What twrp version r you using? I would fastboot flash the latest one for your device.
I've successfully updated to SkyDragon v37 (5.0)!
I guess the missing piece of the puzzle was just that 4.4 upgrade, immediately followed by a ROM update prior to reboot.
Thanks so much.
MostlyTherapeutic said:
I've successfully updated to SkyDragon v37 (5.0)!
I guess the missing piece of the puzzle was just that 4.4 upgrade, immediately followed by a ROM update prior to reboot.
Thanks so much.
Click to expand...
Click to collapse
No problem. Glad to help you out! Enjoy your lollipop
Hi guys,
I really need help here. I have a SGP312, bootloader unlocked, and I'd like to get back to stock rom 10.7.A.0.228 because I need MHL-Output and this doesn't work with any custom rom I tried. Here's the problem: I can get into fastboot and into flash mode but nothing I try is working. If I use flashtool the and flash latest XperiFirm ROM for SGP312 everything is running fine until I try to boot. The Sony logo appears and then nothing happens. Once I waited for over 30 minutes. Screen stays on but it's not booting.
So back to flashing recovery...in recovery I can flash ALL custom roms I want. LineageOS, crDroid, CyanogenMod, no problem. If I try to flash this: "https://forum.xda-developers.com/xperia-tablet-z/general/stock-10-7-0-228-vmo-t3303365" I have same problem as described before. Sony logo pops up, screen stays on, no boot.
Also I tried different recoveries TWRP, CWM, Phil's and so on and nothing seems to work. With wipes without wipes does not matter...
And I tried Sony flash tool Emma (with rom for SGP11) and I tried with TWRP to flash a backup of 10.7.A.0.228 I made...both with same results
Can anyone help? I just want to go back to Android 5.1.1 (root preferred but if no root it's also okay) or I need a custom rom with working MHL. Does anyone have the one clue that can get me back to stock rom?
Thanks guys!
johneggman said:
Does anyone have the one clue that can get me back to stock rom?
Thanks guys!
Click to expand...
Click to collapse
It's a known issue, especially after coming from android 7.x.x ROMs.
You need to flash ANY stock ROM except 5.1.1. 4.1.2 or 4.4.2 will do. After the ROM boots ok, you can flash 5.1.1 directly via Flashtool 0.9.18.6.
It will work.
Rootk1t said:
It's a known issue, especially after coming from android 7.x.x ROMs.
You need to flash ANY stock ROM except 5.1.1. 4.1.2 or 4.4.2 will do. After the ROM boots ok, you can flash 5.1.1 directly via Flashtool.
It will work.
Click to expand...
Click to collapse
Thank you very much! I'll give that a try. Right now I'm having problems with flashtool 0.9.23.2. It gives me the "Processing of loader.sin finished with errors" and "Error in processHeader : 1" when I try to flash. Drivers are installed correctly, tablet z is recognized as "Sony sa0107". I'm running Windows 10 64bit and flashtool as admin.
Any ideas?
johneggman said:
Thank you very much! I'll give that a try. Right now I'm having problems with flashtool 0.9.23.2. It gives me the "Processing of loader.sin finished with errors" and "Error in processHeader : 1" when I try to flash. Drivers are installed correctly, tablet z is recognized as "Sony sa0107". I'm running Windows 10 64bit and flashtool as admin.
Any ideas?
Click to expand...
Click to collapse
you need version 0.9.18.6.
Rootk1t said:
you need version 0.9.18.6.
Click to expand...
Click to collapse
Thank you! I'll give that a try as soon as I have time. If that also does not work I'll try flashing with my Macbook. Maybe my Windows computer really has some driver issues.
Rootk1t said:
you need version 0.9.18.6.
Click to expand...
Click to collapse
Hi Rootk1t,
thanks for the tip! It worked. I went from 4.4.4 to 5.1.1 prerooted although I had to do this with a Macbook. Even version 0.9.18.6 didn't want to flash my SGP312. I think the drivers on my windows machine are really messed up. But now everything is fine!
Thanks again!
Do you have any hints for me where I can find older stock versions?
schaeaef said:
Do you have any hints for me where I can find older stock versions?
Click to expand...
Click to collapse
Try finding your FTF on http://xperiafirmware.com/
johneggman said:
Hi Rootk1t,
thanks for the tip! It worked. I went from 4.4.4 to 5.1.1 prerooted although I had to do this with a Macbook. Even version 0.9.18.6 didn't want to flash my SGP312. I think the drivers on my windows machine are really messed up. But now everything is fine!
Thanks again!
Click to expand...
Click to collapse
So where did you find the stock 4.4.4 for SGP312? Every single thing I find, links are dead. Thanks
jhcomputerguy said:
So where did you find the stock 4.4.4 for SGP312? Every single thing I find, links are dead. Thanks
Click to expand...
Click to collapse
I'm gonna check as soon as get home. All I remember is, that I was searching a long time because, as you said, all links were dead. Maybe I still have the ROM somewhere in my files. I'll get back to you.
jhcomputerguy said:
So where did you find the stock 4.4.4 for SGP312?
Click to expand...
Click to collapse
I have some tablet firmwares saved.
Rootk1t said:
It's a known issue, especially after coming from android 7.x.x ROMs.
You need to flash ANY stock ROM except 5.1.1. 4.1.2 or 4.4.2 will do. After the ROM boots ok, you can flash 5.1.1 directly via Flashtool 0.9.18.6.
It will work.
Click to expand...
Click to collapse
This was exactly what I needed, thanks! Couldn't flash anything on my SGP311 with the latest Flashtool, but followed your advice and had no issue.
Rootk1t said:
It's a known issue, especially after coming from android 7.x.x ROMs.
You need to flash ANY stock ROM except 5.1.1. 4.1.2 or 4.4.2 will do. After the ROM boots ok, you can flash 5.1.1 directly via Flashtool 0.9.18.6.
It will work.
Click to expand...
Click to collapse
thanks this fixed my SGP311
I flashed 4.4.4 rom
managed to find on 4pda russian website. not sure if pasting link is allow here but just google 4pda and your model number or topic 470240
the page has a complete archive
This saved my SGP311! Thanks for sharing the breadcrumbs to an active download link for 4.4.4 in 2018, found it, downloaded it, flashed it, booted again!
Rootk1t said:
It's a known issue, especially after coming from android 7.x.x ROMs.
You need to flash ANY stock ROM except 5.1.1. 4.1.2 or 4.4.2 will do.
Click to expand...
Click to collapse
Just for the search engine: 5.0.2 didn't work for me either - same symptoms as with 5.1.1. Going back to 4.4.4 worked.
Rootk1t said:
It's a known issue, especially after coming from android 7.x.x ROMs.
You need to flash ANY stock ROM except 5.1.1. 4.1.2 or 4.4.2 will do. After the ROM boots ok, you can flash 5.1.1 directly via Flashtool 0.9.18.6.
It will work.
Click to expand...
Click to collapse
Thank you SO much! I have been flashing umpteen versions with no luck and now with a very ancient "store front" version I'm back up and running! Thanks!
I'm sorry but I can't find any suitable firmware for SGP312.
I'm currently on Android 5.1.1 (Build 10.7.A.0.228, Germany/EU if that matters), and I'd really like to try to upgrade it to LineageOS 15.1 for all kinds of reasons; but in case that I botch anything (or the apps I really need don't work, like the screen time manager, as it's the kids' device), I really want to have a working firmware at hand to at least recover it back.
Kinda-noob question: do I really need a flashable firmware or would a full nandroid backup work for a rollback once I have TWRP installed?
XPUser99 said:
I'm sorry but I can't find any suitable firmware for SGP312.
I'm currently on Android 5.1.1 (Build 10.7.A.0.228, Germany/EU if that matters), and I'd really like to try to upgrade it to LineageOS 15.1 for all kinds of reasons; but in case that I botch anything (or the apps I really need don't work, like the screen time manager, as it's the kids' device), I really want to have a working firmware at hand to at least recover it back.
Kinda-noob question: do I really need a flashable firmware or would a full nandroid backup work for a rollback once I have TWRP installed?
Click to expand...
Click to collapse
For a kids device, i would recommend to stay on sony stock 5.1.1, because games run faster there, also it is already tried and tested with easy root installation and debloating.
To revert back from custom ROM (LOS or RR) to stock you'll need to flash firstly any firmware (like 4.4.4) except the latest 5.1.1, then boot it, and afterwards update to 5.1.1 if you want so. If you revert straight to the latest 5.1.1 stock, you'll get permanent bootloop or black screen issue.
So you need to have at least two stock firmware packages.
As for nandroid backup, you can't revert from custom rom to stock via restoring nandroid backup.
Fresh install is recommended.
Can this even be accomplished ?
I am not very phone savvy. I have spent a ton of time reading (apparently) questionable directions/suggestions on what to do.
My ultimate goal was to flash some (any) form of LineageOS on this phone.
I have the USB drivers etc installed (I did manage to root the phone).
I have downloaded Odin (two versions : 3.09 which did not work and 3.14.14 which scared me with warning about deleting my google account...)
I was trying to flash TWRP-3.3.1-0jfltevzw.img.tar (and 3.3.0) obtained from the TWRP website.
I get Write FAIL! (Auth) error very early on.
I have NOT unlocked the bootloader (Is that possible ?). There is no OEM Unlock option in my settings.
I assumed that if the TWRP website published the recovery file that it must be possible to flash it - right ?
I also assume that if I can get ANYTHING flashed to the phone then I should be able to flash some sort of LineageOS. ???
If I ever get this to work, does the TWRP recovery co-exist with LineageOS or does is TWRP wiped when you flash LineageOS ?
Am I using the wrong tool ? Should I be using Odin or something else ?
Sorry for all the questions - but these are a reflection of my mind at this point (quite jumbled).
No LineageOS or TWRP. Verizon prevents the bootloader from being unlocked. You need an unlocked bootloader to install TWRP or an AOSP custom ROM like LineageOS. Some ROMs are possible, but they will all be based on TouchWiz. If you see a ROM with an Android version of 4.x.x, it's not compatible. Only 5.x.x works once you've updated. Here is a guide and list of ROMs: https://forum.xda-developers.com/t/...bricked-de-brick-rom-list-kernel-mod.3395833/
RaspberryPiBen said:
No LineageOS or TWRP. Verizon prevents the bootloader from being unlocked. You need an unlocked bootloader to install TWRP or an AOSP custom ROM like LineageOS. Some ROMs are possible, but they will all be based on TouchWiz. If you see a ROM with an Android version of 4.x.x, it's not compatible. Only 5.x.x works once you've updated. Here is a guide and list of ROMs: https://forum.xda-developers.com/t/...bricked-de-brick-rom-list-kernel-mod.3395833/
Click to expand...
Click to collapse
Hi I have the same problem how do I unlock my bootloader
Mooxxy said:
Hi I have the same problem how do I unlock my bootloader
Click to expand...
Click to collapse
Did you read my comment? It's not possible.
RaspberryPiBen said:
Did you read my comment? It's not possible.
Click to expand...
Click to collapse
i did sorry
hi
just got a SM-T225 via o2 in UK
It came with android 11 & one ui 3.1 and I've successfully unlocked the bootloader
what's the best way to get an android 13 build installed? I want a 'vanilla experience' if I can, I don't want Samsung apps but I can uninstall then with adb if necessary
I tried to update to android 13 but now it says FAILED, 'your tablet's operating system has been modified in an unauthorised way'
looks like I can get version T225XXU1CVL5 from samfw so is there a quick/dirty way to install that?
thanks!
punteruk said:
hi
just got a SM-T225 via o2 in UK
It came with android 11 & one ui 3.1 and I've successfully unlocked the bootloader
what's the best way to get an android 13 build installed? I want a 'vanilla experience' if I can, I don't want Samsung apps but I can uninstall then with adb if necessary
I tried to update to android 13 but now it says FAILED, 'your tablet's operating system has been modified in an unauthorised way'
looks like I can get version T225XXU1CVL5 from samfw so is there a quick/dirty way to install that?
thanks!
Click to expand...
Click to collapse
If you want a truly vanilla AOSP experience, you can follow my guide here to install an AOSP GSI.
Otherwise, if you're simply seeking to install stock Samsung A13 firmware, use Odin.
V0latyle said:
Otherwise, if you're simply seeking to install stock Samsung A13 firmware, use Odin
Click to expand...
Click to collapse
ok thanks for the reply
I'm on linux and I see there is a command line version available
Example :
$odin4 -b BL_XXXX.tar.md5 -a AP_XXXX.tar.md5 -c CP_XXXX.tar.md5 -s CSC_XXXX.tar.md5
BUT in the firmware download there is also a HOME_CSC_xxxxx file, do I need to do anything with that one?
cheers
punteruk said:
ok thanks for the reply
I'm on linux and I see there is a command line version available
Example :
$odin4 -b BL_XXXX.tar.md5 -a AP_XXXX.tar.md5 -c CP_XXXX.tar.md5 -s CSC_XXXX.tar.md5
BUT in the firmware download there is also a HOME_CSC_xxxxx file, do I need to do anything with that one?
cheers
Click to expand...
Click to collapse
If you're doing a clean flash and want to wipe data, use the CSC_xxxxx file. The HOME_CSC_xxxxx is when you're already on Samsung firmware and want to upgrade, as it does not wipe user data. As long as you never installed a custom ROM and are simply trying to upgrade the stock firmware, you can use HOME_CSC. It is still advisable to do a clean flash, however, just to prevent any issues with residual leftovers from older firmware.
quick follow up, odin4 on linux worked a treat
I was on T225XXU1AVE1 & updated like this following download from sam.fw
./odin4 -b BL_T225XXU1CVL5_T225XXU1CVL5_MQB60236739_REV00_user_low_ship_MULTI_CERT.tar.md5 -a AP_T225XXU1CVL5_T225XXU1CVL5_MQB60236739_REV00_user_low_ship_MULTI_CERT_meta_RKEY_OS13.tar.md5 -c CP_T225XXU1CVL5_CP23421020_MQB60236739_REV00_user_low_ship_MULTI_CERT.tar.md5 -s CSC_OXM_T225OXM1CVL5_MQB60236739_REV00_user_low_ship_MULTI_CERT.tar.md5
looking to debloat the samsung carp now
thanks again @V0latyle
V0latyle said:
Otherwise, if you're simply seeking to install stock Samsung A13 firmware, use Odin.
Click to expand...
Click to collapse
Hi V0latyle,
I'm in the same situation as punteruk. I just unlocked the A7 Lite (T220) that came with Android 11 and now want to flash Android 13.
I downloaded Android 13 for my region from samfw.com. Specifically, this one: https://samfw.com/firmware/SM-T220/XAC/T220XXU1CVL7. The ZIP file only has AP, BL, CSC and HOME_CSC. Is it okay to flash?
aospray said:
Hi V0latyle,
I'm in the same situation as punteruk. I just unlocked the A7 Lite (T220) that came with Android 11 and now want to flash Android 13.
I downloaded Android 13 for my region from samfw.com. Specifically, this one: https://samfw.com/firmware/SM-T220/XAC/T220XXU1CVL7. The ZIP file only has AP, BL, CSC and HOME. Is it okay to flash?
Click to expand...
Click to collapse
Yes. Follow his suggestions regarding CSC in previous posts.
One ui or aosp ?
Difficul said:
One ui or aosp ?
Click to expand...
Click to collapse
How is stock One UI with Android 13? I would probably prefer an AOSP/LOS build, but I've never used a GSI build before. Any limitations with using a GSI build?
aospray said:
How is stock One UI with Android 13? I would probably prefer an AOSP/LOS build, but I've never used a GSI build before. Any limitations with using a GSI build?
Click to expand...
Click to collapse
You should experience it yourself