Like most people I updated to the 4.3 and the new base band through the sony pc companion and everything was great for the first week, but then the red flags started to go off and here is the list:
- My games and apps that were working fine would not open even sonys stock apps. Tried re starting the phone and it would still not let me use them.
- draw back issues on the lock screen (5sec) and home screen wallpaper (10 sec) plus it auto reverted back to an older wall paper.
- when I connect it to my dock the lock screen does not auto rotate to landscape mode.
I have gone back to factory reset but issue number 2-3 still persist. Can any one help me either solve these issues or tell me the best way to downgrade to the 4.2 stock firmware.
MOEL C6833
current base band is 8974-AAAAANAZQ-10270025-26
KERNEL VERSION
3.4.0-PERF-G4F35567
[email protected]#1
TUE NOV 19 19:53:25 2013
BUILD NUMBER
14.2.A.0.290
Any help will be greatly appreciated. Thanks.
ujan1 said:
Like most people I updated to the 4.3 and the new base band through the sony pc companion and everything was great for the first week, but then the red flags started to go off and here is the list:
- My games and apps that were working fine would not open even sonys stock apps. Tried re starting the phone and it would still not let me use them.
- draw back issues on the lock screen (5sec) and home screen wallpaper (10 sec) plus it auto reverted back to an older wall paper.
- when I connect it to my dock the lock screen does not auto rotate to landscape mode.
I have gone back to factory reset but issue number 2-3 still persist. Can any one help me either solve these issues or tell me the best way to downgrade to the 4.2 stock firmware.
MOEL C6833
current base band is 8974-AAAAANAZQ-10270025-26
KERNEL VERSION
3.4.0-PERF-G4F35567
[email protected]#1
TUE NOV 19 19:53:25 2013
BUILD NUMBER
14.2.A.0.290
Any help will be greatly appreciated. Thanks.
Click to expand...
Click to collapse
Do a repair via the Sony PC companion for windows or sony bridge for mac. It may help.
My issue is the dialer. If I answer or call someone, the screen goes black.
Sent from my C6833 using Tapatalk 4
Leechoonhwee said:
My issue is the dialer. If I answer or call someone, the screen goes black.
Sent from my C6833 using Tapatalk 4
Click to expand...
Click to collapse
Do you use front screen protector? maybe you need to replace it with the better one (clear) or use screen protector that has a hole to make the proximity sensor side not covered.
Leechoonhwee said:
My issue is the dialer. If I answer or call someone, the screen goes black.
Sent from my C6833 using Tapatalk 4
Click to expand...
Click to collapse
That happened to me too after updating to 4.3. A reboot fixed it temporarily, but i haven't had any issues after i did a full wipe.
ujan1 said:
Like most people I updated to the 4.3 and the new base band through the sony pc companion and everything was great for the first week, but then the red flags started to go off and here is the list:
- My games and apps that were working fine would not open even sonys stock apps. Tried re starting the phone and it would still not let me use them.
- draw back issues on the lock screen (5sec) and home screen wallpaper (10 sec) plus it auto reverted back to an older wall paper.
- when I connect it to my dock the lock screen does not auto rotate to landscape mode.
I have gone back to factory reset but issue number 2-3 still persist. Can any one help me either solve these issues or tell me the best way to downgrade to the 4.2 stock firmware.
MOEL C6833
current base band is 8974-AAAAANAZQ-10270025-26
KERNEL VERSION
3.4.0-PERF-G4F35567
[email protected]#1
TUE NOV 19 19:53:25 2013
BUILD NUMBER
14.2.A.0.290
Any help will be greatly appreciated. Thanks.
Click to expand...
Click to collapse
- Bluetooh Share Force Closing when Bluetooth is turned off (Not always)
- Launcher redraw is a bit common with 4.3 but loading it back doesn't take too much time due to fast hardware so no big complaint
- Sketch and Note app should be able to be placed at landscape mode. But it's a minor issue.
- Superior Auto Mode.. Man, i do really wish that they just need to reduce the ISO and then voila the result will be a lot better! Tested in Manual Mode and it is confirmed that ISO bigger than 400 will destroy the picture quality, lot of smudges and artifact everywhere!
abuihsan said:
Do you use front screen protector? maybe you need to replace it with the better one (clear) or use screen protector that has a hole to make the proximity sensor side not covered.
Click to expand...
Click to collapse
No screen protector on at all.
LordManhattan said:
That happened to me too after updating to 4.3. A reboot fixed it temporarily, but i haven't had any issues after i did a full wipe.
Click to expand...
Click to collapse
Well. Will try that if it is possible
Hi, after upgrading to 4.3, here are some issues:
+ Device heating + battery super drain
after a lot of flashing and tweaking (not twerking), the current situation is:
+ Normal heat, battery still drain like hell, Android OS takes up to 70%
HI,
As i have some issues. I would like to download the Old version of Gione Elife e3 over-the-air (OTA) update. It was launched in May 2014.
This update doesn’t upgrade the Android version but brings new Camera features including new modes picture clear, best picture, muli-angle shots and beauty effects.
E3 (204.15 M) that's the size of the download.
The reason i am saying this becz my Camera has some problems. Earlier it was crystal clear, now i can see the Rear camera of Elife e3 camera has problems like when i click i get blurry picture. The secondary camera is HD so that's perfectly fine. But the Front camera is having problems specially the AUTO Focus mode.
However once i had tried to remove the back cover and when i tried to close it by mistake my hands went on the volume button and the power button as i was trying to press from the side. Now that time i saw that my Mobile started flashing some blue screen like the ones which we can see in computer. I saw there were some tests running like image test and some other tests going on. I immediately stopped it by pressing power button. I have newer seen such test earlier.
Now my question is that is there any test possible in Elife E3 via power button + volume button??? i am not talking about the factory reset.
After this i tried to take camera shots but all looked blured??? SO i think that it might be becz of the test that happened where i had stopped forcefully. So i think may be by restoring the OLD Version of the OTA Update thinks might work.
So how to downgrade to the old version for ELIFE E3?
Dear,
I am here to clarify a thing.
I am using moto g 1st gen.
On/off switch on pcb got separated.
Can the switch can be re-soldered in the board again ?
I dont know about hardware but till then you can use "awesome on off" app to wake your device up
Regards milkyway3
My shot at my favorite watch face - Moto 360 Dials.
Advantages:
1. I own a Moto 360 (2015) version, however with this one I get the same face in Ambient mode too! Please be wary of affect on watch battery life though. I still end the day with around 30% battery left, however that might vary for you.
2. Digital time and day and date
3. Non-Moto 360 owners with a round Android Wear smart watch can use this watch face.
If I make further changes such as font, adding the "moto" text, new watch hands etc, I'll share it again.
Enjoy and hope you like it!
http://pujieblack.com/share/?scv2=-...anZKULs1zEE_8ExQpaWWQ2HmnIY8K9bHZu2YEKxyXVNoA
https://facerepo.com/app/faces/details/moto-360-dials-15c819f1fc7
Download Pujie Black : https://goo.gl/JOfgMO
#AndroidWear #WatchFace #PujieBlack
Hi all - I've installed the Ugoos AM2 ROM on my Minix U1 box:
Android 6.0.1 Firmware V1.1.1 for AM2 Android 6.0.1 Firmware V1.1.1 for AM2 440.33MiB 21/06/2017
at http://ugoos.net/downloads.
Everything is fine, except that I cannot use the power button on the A2 lite remote. It will start the box, but will not power down. I've read that this could be due to a limitation of android 6, but am not sure. And no matter what setting is entered in Settings->Display->Daydream, I cannot get the unit to fully power down - only sleep ( green light ). So far i have tried:
- changing "stay awake" to "off" in developer mode
- power key action to "shutdown" in display->daydream settings
- HDMI CEC setting = off
... but nothing works. And as mentioned, the A2Lite remote will turn the box on from a dead state, but the power key becomes unresponsive once the rom loads - tested with a keymap app and it wouldn't even register a keypress when I pressed the power button.
I think I found the answer here, but not sure how to enter the data:
https://kodi.wiki/view/MINIX_A2#keyboard.xml_per_Window_customization.2C_refining_remote_actions
#5
5 remote.conf example for amlogic boxes
/etc/amremote/remote.conf
Example settings needed to map the power button (note - this only applies once the device has booted, the initial power on detection appears to be in hardware)
....
factory_code = 0xfe010001
key_begin
0x18 116 # power
key_end
....
..
Very much appreciated - thanks!
A couple questions: 1) Do you get full 4K HDR res - either youtube or personal videos? 2) The power button thing is a mystery - I think the Kodi wiki nailed it when it mentioned that the remote activates the box from a dead state (hardware-based), but becomes unresponsive after boot-up. Any chance I could have a look at the remote.conf of your ROM and see if I can modify it to add functionality?
Also, what the heck happened to the forum - It's still an active company, no? I've been looking at the posts through search engine caching, but those are gradually disappearing ..