Related
I checked out a few other threads, on a couple forums and dont think anyone has been stupid enough to do this so far...
about 4 months ago, I was lost and my phone was dead, having bodged a car charger together I plugged it in.
The phone turned on, booted up and I got the SatNav software running, but before I could drive off it started flashing.. screen, lights, like a tiny disco....
Then it smoked, quite a lot for a second or two, by this time I'd took battery out and dis-connected the charger but it was too late, the phone was dead.
I got home, put the battery in a desktop charger til it was full and the phone has remained at it's current condition since.
So; it won't turn on, vibrate or flash any lights. The ONLY thing it does, is power up the right hand side bottom white light between the home key and back button.
I've been Ebaying since the day I killed it for a spares one, tried buying a main board but no joy anywhere without paying over £70 (and that's for a complete but knackered handset).
My dad's good with phones, his mate better also both of which said i've burnt out some chips. Some do kinda, have small 'holes' in, and I wiped a 2GB card too, wont work in anything else.
Without spending silly amounts on a new phone can I not do anything with this? Apparently everything except the main board should work (screen, digitizer etc)..
Help anyone please? -ta.
I suggest that you contact your local support team because I think this is something that needs to be examined at a repair center.
http://www.sonyericsson.com/cws/corporate/common/contact/phonelist
I dropped my X10a, and cracked the screen/digitizer. Is it easier to replace the whole housing or just the digitizer? Any suggestions on which company supplies OEM parts at the best prices?
agentJBM said:
I dropped my X10a, and cracked the screen/digitizer. Is it easier to replace the whole housing or just the digitizer? Any suggestions on which company supplies OEM parts at the best prices?
Click to expand...
Click to collapse
I've found some an i will keep looking but here is some at the bottom of my post and if you know of some please do post them here and all update this. good luck
http://forum.xda-developers.com/showthread.php?p=15712166#poststop
My transformer used to work fine, then after the Jellybean update it would randomly shut off. After a while it would only stay on when charging even if battery was 100% charged. I also noticed that if i factory restored or if there was a new update it it would work for a long time before plugging it in, but then the next time I would have to keep it charging to stay on.:crying:
I had a similar problem on my Prime. I opened mine a re-attached the battery cable, after that it worked fine for a couple of weeks until it happend again. I opened it again and saw that the batteries screw holes all were empty so the battery was lose and the cable was all that kept it stuck. Such a chame on ASUS to deliver such poor build quality. I attached the battery with scotch tape and after that it I haven't had any problems but I expect I will need to open it again.
There are threads for opening the Prime, I started with my nails and then used credit cards starting att the bottom.
Cheers
JayElh said:
I had a similar problem on my Prime. I opened mine a re-attached the battery cable, after that it worked fine for a couple of weeks until it happend again. I opened it again and saw that the batteries screw holes all were empty so the battery was lose and the cable was all that kept it stuck. Such a chame on ASUS to deliver such poor build quality. I attached the battery with scotch tape and after that it I haven't had any problems but I expect I will need to open it again.
There are threads for opening the Prime, I started with my nails and then used credit cards starting att the bottom.
Cheers
Click to expand...
Click to collapse
Thanks i opened mine up and looked around trying to find loose cables or other problems, but I didn't see anything. Anyway, I closed it, and them it worked fine. There must have been a loose cable or something. Again, THANKS~!~!~!~!~!~!~!~!~
:highfive: :victory::good:
Just did a motherboard swap on mine and I too had some screws missing. It was odd because the broken prime I bought had all the screws in all the holes but my bricked prime was minus two screws one on the MOBO and the other on the battery. I've never rma'd my prime so I know it was straight from the factory that way. Cheap Asus. Its like they had a set amount of screws to use on each tablet and that was less than the total amount needed.
Sent from my large and in charge GN2 using Forum Runner
Got a unique issue with my G5. Have had it in a Lifeproof case for awhile now.
Last night, it spent most of the time riding in my back jeans pocket where it always does. I've had zero issues with sitting in the car, and whatnot....as I'm not a hipster that wears tight jeans that could possibly damage the device. Anywho, I got out of the car, dropped the phone into my pocket, and went about my evening at work - which involved ZERO sitting.
I go to pull out the device to make a call, verify my fingerprint, and nothing. Well, almost nothing. Its as if half of my screen is "disconnected", and the other half is out of sync. I've attached a youtube video to see what I'm talking about. ( https://youtu.be/357GcnV2-9Y ) My first thought was the ribbon cable became partially dislodged from its plug on the motherboard. I first tried flexing the phone, to see if it magically worked, or changed. Nada.
This am, brought it to the VZW store, expecting a quick fix, but since it shows no damage at all I got nothing but a warranty replacement request, and a promise it would be delivered within 3 days. Thats not good enough, as I use this thing for work. So I looked at alternatives...
I've browsed the teardown on ifixit, and was surprised at its simplicity. I pulled it apart, and re-seated the display ribbon cable, to no avail. Still apparently toast.
I've managed to get through the boot up pattern security I set up, and the phone is active. I just cant get it into MTP mode to copy my crap as I'm guessing I need to pull down and click on the notification to switch it.....which, of course, I cannot see. Basically, I just want to get my crap out of the internal storage before I ship this one back. Obviously I'm going to wipe it with the Android Device Manager before I deactivate, but still would like to salvage something.
Anybody have any thoughts? Or maybe is there a second ribbon cable somewhere that wasnt mentioned in the teardown?
Youtube link: https://youtu.be/357GcnV2-9Y
I have no advice as to how to get your files off, I'm sorry about that.
But I wanted to confirm that this isn't an isolated occurrence and it happened to me! I also babied my phone and never dropped it and it was always in a case.
I don't know what to blame as the cause, I'm hoping just bad quality control. I was hoping it's not due to flexing because it's not as sturdy due to the bottom of the phone not being physically attached.
Photos of the same thing on mine: https://imgur.com/a/eEAmA
This happened 15 days after I bought it and Best Buy returned it for a new one which three weeks later started bootlooping which was a whole fiasco to get repaired and took over a month. LG's quality control is horrible.
+1 as I am having this issue on a Sprint G5, sent to LG for repair after Sprint was no help. 29 days after purchase.
Hello. A few quick searches on my part found a thread here on the forums for controlling your device from your PC. It also includes a script to run when your phone is in recovery to enable USB Debugging. Try it out ( http://forum.xda-developers.com/showthread.php?t=2786395 ). Hopefully I have helped. If you want to just salvage files, you can enable USB Debugging and pull everything through the USB. However, if you want to still use your apps, or harvest app data, or even use titanium backup or the like to make a complete backup to transfer to the new device, enable USB Debugging, then control your phone. Follow the above thread's instructions to do so.
Thank you for your time,
Xzanah
Hi, I have a problem with my T399n.
My phone doesn't turn on, I installed CM12 and it was good, then I flashed the stock ROM from metro again, everything was good about a month, one day I made a call, whatsapp, text and then I put it in my pocket, then when I pulled it out like 10 minutes later and it was rebooting, I didn't pay attention to this because sometimes my phone reboots itself, later It was power off. I pulled the battery, reinserted it and nothing, connected usb cable, nothing, tried to charge it and nothing, Its like my phone died. Looking for a fix, there is the usb jig that work with others galaxy's.
So I just want to know if I'm fried or if there's a last hope to revive this phone with the usb jig
Thanks!
Something similar to this happened to me, would love to know the answer...
just today...
just today, not 2 hours ago at most I was playing around with my galaxy light, deciced to root and mod it.. first step was to, ofc flash a custom recovery... well like most things I pursue I ended up fighting the damn thing for HOURS!! could not get it to register on my computer for the life of me.. now I'm far from a dev and probably one of the least experienced on/around here but something so trivial as lack of drivers, udev, faulty port/cords isn't my forte.. so eventually I whipped out my handy dandy usb jig and .... nothing... *head scratch* hmmm.... now its got my attention... so I get out the multimeter usb data/charging cable and it does show signs of life, easily registering 5.1v / 0.4 mah ... now I'm getting anxious.... so its time for the next test... usb-otg connected to dbl usb-type-A converter to connect to the pooter (it never works but I wish it would ) and nothing there... so otg to my main mobile, reverse it... hmmm seems this lil guy is taking in charge and no data xfer of any kind... since id already rotated various cables I turned my attention to the charging port.. under 6x magnification and too many lumens light I could hardly see any problems but persisted with the 99% isopropyl anyhow... end result "wtf is wrong with this garbage....?) and just as I went to throw it at the wall I spotted my personal "boneyard" where all of my former problematic/faulty devices end up and just in sight was another tmobile galaxy light, broken lcd but logic board intact.. so a quick flip of the wrist and a smack on the back and the 2 became one... fired her up, plugged it in and BAM.. instantly detected... and for some reason I cant quite seem to put my finger on, I had the urge to power it back off and insert my usb jig one final time to see if it infact would work with the galaxy light.... *device in left hand... jib in the right.... bead of sweat steadily sliding down my ruffled brow... time seemed to all but come to a screeching halt as the two came closer until the moment of trust had arrived... the initial contact, the penetration (lol) .. the pause... BOOM factory mode*
so, now that u read that half illiterate rambling from a barely educated redneck shut-in to determine if the usb jig works with galaxy light or not .. the answer is yes... it does unless its a piece of crap like one of the 2 I own is...
KatharsisSoul said:
Hi, I have a problem with my T399n.
My phone doesn't turn on, I installed CM12 and it was good, then I flashed the stock ROM from metro again, everything was good about a month, one day I made a call, whatsapp, text and then I put it in my pocket, then when I pulled it out like 10 minutes later and it was rebooting, I didn't pay attention to this because sometimes my phone reboots itself, later It was power off. I pulled the battery, reinserted it and nothing, connected usb cable, nothing, tried to charge it and nothing, Its like my phone died. Looking for a fix, there is the usb jig that work with others galaxy's.
So I just want to know if I'm fried or if there's a last hope to revive this phone with the usb jig
Thanks!
Click to expand...
Click to collapse
It does in fact work. If asking about the USB mount, from my knowledge you would've had to already installed them by turning the function on like I did in the first screen shot.
If you need them I can link them to my drive or mega. Whichever is best. Think I have drop box still too.
And yes. I have bricked this phone I'm using now for a solid 3 days when I first started with it. However cm12 has bugs, after the second time it rebooted and bricked on me I went back to Tigerlily I even had no SIM error but somehow fixed that when flashed back to stock. Cm12 caused me to flash back to stock about 3 times a day. Too much headache. Guess thats why we are not supposed to do this to our primary phones. on tigerlily ive Had a little trouble keeping super su in his place too, Got home last night and POOF, just gone for no known reason. finally got him to stick by installing him into the system with lucky patcher. Flashify, flashfire, and even rom installer all failed to keep him there. . I have also stripped down almost every file just for fun to see what other fine items I could damage, Finally found where they hide the dialer codes for the phone. They are not in any files that i have spent the last for years looking in. The codes are inside of the APK. The last place I decided to look. Everything I know is self taught and just recently started working with apps for windows 10 and merging android files into windows apps.
Now , I'm actually quite impressed with it's capabilities .
Really what's helped me dial everything in was the helped of an app called Mixplorer with all the ad-on's all of which are free.
Good luck with your brick. Myself, I have 3 other phones I'm currently working on unbricking. One of which is a hard bricked LG motion. Flashed th err wrong firmware to it a year ago. Just this week got the cup to recognize it. the code to get into the first service menu pictured here on the bottom left is *#0808#
Really what's helped me dial everything in was the helped of an app called Mixplorer with all the ad-on's all of which are free.
Good luck with your brick. Myself, I have 3 other phones I'm currently working on unbricking. One of which is a hard bricked LG motion. Flashed th err wrong firmware to it a year ago. Just this week got the cup to recognize it.
when youre ready to really see whats going on you can dial *#9900# for all the System Dump features.
after taking the module apart and putting it back the phone stuck not booting up with a message "insert a supported module to turn on your phone".
The issue I believe is not related to the module itself, since the same story with camera module.
The phone could have been exposed to the high humidity the day before. Before taking it apart the phone used to make occasional sound notification like it has been plugged in to charge.
Tried to clean data pins, disassemble it but no success.
I am having the same exact problem and I was wondering if you ever figured out how to fix it?
yobritt said:
I am having the same exact problem and I was wondering if you ever figured out how to fix it?
Click to expand...
Click to collapse
no, LG has told me to send the device for a service.
I'm on a trip and quite far from any cell phone store but I would appreciate on updates with your phone as well.
upd. I have a suspicion on two metal pins going from the module. if that's the module detector pins, then they might not be connected properly. blocking them w a tape on a working phone could shed some light on this theory.
My Experience
Thought I was the only one with this problem! My phone suddenly started constantly flashing the "USB" symbol with the "Insert Cable to Charge Phone" message and associated beep, which forced me to turn off the master volume...so I couldn't hear the phone ring!. The "Insert Supported Module" happened a few times at the beginning when I first pulled out and re-inserted the module/battery, but then mysteriously stopped. I went to an AT&T store and swapped the module with their display phone, and it seemed to stop (at least for the 5+ min I tried it), so I've been trying to find a replacement bottom module (I believe it's called the "Charging Module" or "Loudspeaker"), but to no avail. I tried purchasing one (SSTParts dot com look for "LG G5 Loudspeaker"), but that came without the electronic board, so I also picked up Ebay #282082091333) to go with it...but lo and behold, when I put them together and tried it, the phone gives me the "Insert Supported Module" message and won't boot. I then tried the old circuit board with the new housing, and it did boot up...but the flashing USB came back, at least for a few minutes. So I'm waiting to see if the problem comes back full blast. So we now know that the phone will only take an OEM part, at least regarding the electronics. Called LG to see if I could buy one, but they said I had to send it in for repairs...which I don't want to do (you know how it is with intermittent problems...). One thing I was able to do was to turn off the "Notification" volume (there are four Volume controls in the "Sound" settings; this is the 3rd one down) and it seems that this quieted the problem...so it keeps happening, but it's not causing me any functional concerns...though I worry that one day it might. I've looked at Ebay #401119970468, but though it looks identical, the listing says it's for an H850, and mine's the H820...so is it worth the risk? Any other updates or ideas out there? I'm thinking of going to the AT&T store and swapping out the display model's module when no one's looking...
I sent my phone for service. Hopefully I'll have the news soon.
Okay, so they they returned the phone back to the store saying "the damage is too expensive" and it's beyond the warranty. I'm pretty mad, will go to pick it up and see wtf is going on.
Won't turn back on..
ArtDesire said:
after taking the module apart and putting it back the phone stuck not booting up with a message "insert a supported module to turn on your phone".
The issue I believe is not related to the module itself, since the same story with camera module.
The phone could have been exposed to the high humidity the day before. Before taking it apart the phone used to make occasional sound notification like it has been plugged in to charge.
Tried to clean data pins, disassemble it but no success.
Click to expand...
Click to collapse
Happened to me about 5 minutes ago. Try blowing some air on the module.. trust me it will work.
Also if no airdryer is handy, take out the module let it sit out overnight and reconnect few hours later.it works. It gives time to dry out. This is a major flaw.mother****ers; They owe us the G6
Air it out it'll come back at around half an hour,expect it to also have low battery power.
airing it out didnt work for me.
the only thing that worked for me was to replace the bottom part, ie. the charging module. I got one from ebay and it worked like a charm. My g5 is almost back in its new condition.
on ebay, search for Genuine Charging Module Bottom Chin
Fixed
My wife's phone had this same problem. I think it mostly dirty contacts that cause this problem. I used contact cleaner, let dry assembled and it worked great. These companies have you over a barrel when you send it in.
this issue is with the dumb bottom power module I have same issue but I am lucky that I had bought the LG Camera module that has this module built in, so I had a backup so to speak (other than I can't use my case at the moment) and Sprint no longer has the module, so I will be ordering these http://www.ebay.com/itm/like/282313529509?chn=ps&dispItem=1 (They look new and having a pack of 3 of these should be worth it.) hopefully this works for others too.
Thanks.
I have a doubt
I have in my hands 2 g5 phones
one from sprint and one from cellcom?fixme?
however I CAN NOT exchange this module among phones. If I do so, I receive the error which prevents booting.
But every module works fine on its phone
I talked to a friend who received a lot of these phones for sale
all from sprint, and he say he could not exchange this part in the phones and instead he had to mark every part to its phone to prevent accidental swapping.
I told to him it should be impossible to be this way, and came to this forum/thread to satisfy my ignorance.
any comments?
yurais said:
I have a doubt
I have in my hands 2 g5 phones
one from sprint and one from cellcom?fixme?
however I CAN NOT exchange this module among phones. If I do so, I receive the error which prevents booting.
But every module works fine on its phone
I talked to a friend who received a lot of these phones for sale
all from sprint, and he say he could not exchange this part in the phones and instead he had to mark every part to its phone to prevent accidental swapping.
I told to him it should be impossible to be this way, and came to this forum/thread to satisfy my ignorance.
any comments?
Click to expand...
Click to collapse
I have a Verizon and sprint g5 and its the same between the two modules which irritates me too cause I figured extra parts
ArtDesire said:
Okay, so they they returned the phone back to the store saying "the damage is too expensive" and it's beyond the warranty. I'm pretty mad, will go to pick it up and see wtf is going on.
Click to expand...
Click to collapse
This is far far too late, I know. But those brass (I assume, as they are contacts which would need to be fairly durable) connectors you mentioned covering are 100 % the problem. I lightly, and I do mean very lightly, wet the pad of my fingertip and wet each of those connectors for the hope of conductivity. It worked like a charm. After around 100x of the module error, blowing with a blow dryer and trying to clean off the inner contacts blindly, it finally worked. I've had to do this on a few occasions now and it always works.
Hope this helps someone out,
regurak
I found the solution, you dont have to buy another one, it's just maintenance.
I tried doing some maintenance to all metal contacts I found and it's fixed right away, I assume this would apply to most if not all cases, some contact points are in the upper phone body, so no wonder why someone would get the error with any modules he/she tried. Let me know if it works for you but I think it will, you dont need to buy another part/phone.
Don't forget to hit the THANKS button.
SamaelThuum said:
I tried doing some maintenance to all metal contacts I found and it's fixed right away, I assume this would apply to most if not all cases, some contact points are in the upper phone body, so no wonder why someone would get the error with any modules he/she tried. Let me know if it works for you but I think it will, you dont need to buy another part/phone.
Don't forget to hit the THANKS button.
Click to expand...
Click to collapse
Ok it's been a week or two after I dissassembled the charging piece and posted those pictures and all that and IT JUST HAPPENED AGAIN LAST NIGHT. I noticed it happened because my battery was totally dead and I tried to start charging from my computer's USB 3.0, I remember it also started like this the first time, SO, I guess it's a software thing, not hardware. As soon as you plug it to the computer it will start taking energy, so, you know that even if you unplug the phone from anything, it will still show the error message supported module blabla. As soon as this happens to you, UNPLUG THE PHONE so it doesnt take charge, so, if it keeps showing the error message by itself and hopefully the battery would be so low that it wont show it for more than a minute before it shuts off due to battery. (I know you would say, well, just hard cycle the phone by taking the battery out and in again and try to turn it on or to plug to normal charger, I tried this but it would still show the error, even after I tried draining phone by holding power button without battery for like 1 min, only way that seemed to "reset" it was if batt COMPLETELY died, there's a point where if u try to turn on it only says like "battery too low to turn on"), SO, after battery COMPLETELY died, I plugged it to A NORMAL CHARGER and it worked it time.
SO, if battery is dead, I wont try to charge by PC USB for now
Just happened to my phone out of nowhere.
I kept getting the usb connection options message on my phone, then it just kept buzzing for no reason. So I went to restart the phone and now I'm getting the Insert Supported Module error.
I already know AT&T and our phone insurance will be completely useless. Damn phone isn't even paid off. The LG G5 was the BIGGEST waste of money ever. I hate this stupid phone.
JC Pro1000S Phone NAND IC Programmer
latest JC Pro 1000S programmer which it can match most of the testing module, recently i found a new web for phone repair tools supplying, it is a nice team, and i have ordered a data test module with jc pro 1000s for my phone repair shop, honestly it is a nice experiences, it can save time and solve the motherboard fault fast.
And recently ,i found there exist products in amazon, i want to try, is there someone can provide some advise for me ?
I spilled coffee on my phone and it started sating "insert a supported module to turn on your phone" I put it in a bag of rice over night and it is still displaying the same message. I have no idea what to do. Im worried that all the pictures/videos I have on the phone is lost as well. has anyone that was able to get their phone working again lost all pictures or videos?