Hi everyone, sorry for my bad english first.
Pleas help,
I have a Sm-G925F , Orginaly DDE firmware,,,
I try to fix lost imei. , and get mess somere , after flas via odin orginal fw , and same with kies, witch pass, my phone wont boot stock on powered by samsung with blue flasing light, i can go to download mode ant twpr custom and orginal, i did factory reset and wipe,, rty few difrent firmwares they all pass but no boot, and when i try to flash bootloader its always fail,
Pleas help?..
andriellka said:
Hi everyone, sorry for my bad english first.
Pleas help,
I have a Sm-G925F , Orginaly DDE firmware,,,
I try to fix lost imei. , and get mess somere , after flas via odin orginal fw , and same with kies, witch pass, my phone wont boot stock on powered by samsung with blue flasing light, i can go to download mode ant twpr custom and orginal, i did factory reset and wipe,, rty few difrent firmwares they all pass but no boot, and when i try to flash bootloader its always fail,
Pleas help?..
Click to expand...
Click to collapse
How did you try to fix lost imei?
Which bootloader are you flashing and what fail error in odin?
I did try to edit efs file but at the moment am not lucky yet with it.
But at the moment i try to fix the boot , cause cant go to the phone.
I try to flash Sboot from. G925FXXS4DPIQ_G925FDDX4DPG1_DDE
And i have message in odin
003-added!
003-odin engine v 3.1100
003-File analysis
033-SetupConnection
033-Initialzation
033-Get PIT for mapping
033-Firmware update start
033-SingleDownload
033-sboot.bin
033-NAND write start
033-FAIL!
033-
033-Complete Write operation Failed
OSM All threads completed. Succes 0 Failed 1
Any ideas?? I try almost everything ,,
andriellka said:
I did try to edit efs file but at the moment am not lucky yet with it.
But at the moment i try to fix the boot , cause cant go to the phone.
I try to flash Sboot from. G925FXXS4DPIQ_G925FDDX4DPG1_DDE
And i have message in odin
003-added!
003-odin engine v 3.1100
003-File analysis
033-SetupConnection
033-Initialzation
033-Get PIT for mapping
033-Firmware update start
033-SingleDownload
033-sboot.bin
033-NAND write start
033-FAIL!
033-
033-Complete Write operation Failed
OSM All threads completed. Succes 0 Failed 1
Any ideas?? I try almost everything ,,
Click to expand...
Click to collapse
Only way to fix efs really is with a zx3 box or something similar. If your efs has corrupted you probably wont get it back.
As for the bootloader it looks like your flashing an old one.
I will find you the latest one.
O thats will be big help, If i run my phone i wil try to contact somone for fix. Imei than.
So hope that wil help ..
Hello again, steel need help,, if any can help pleas? thank You.
I just repaired one of these with smart switch and I have the OFW files if someone knows where I can upload them I will
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Apathy772 said:
I just repaired one of these with smart switch and I have the OFW files if someone knows where I can upload them I will
Click to expand...
Click to collapse
Upload to mega? Or android file share or drive
Fix wich boot the phone again was ... Restore a backup from other same s6 edge without efs partition. With higher bootloader ,, and then the phone back to live again.
And now i wil try to fix efs wich is problem.. I dont have a backup .. Any ideas?
Related
Hi, I was trying to root my device with insecure kernel, and then my device hangs on galaxy i9100 boot screen,
so, I've tried to restore my stock kernel, but it didn't help...
finally I've tried to flash the jpkg2 stock rom from intratec thread, also the same...
i tried this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and my phone stoped at this
and with fully falied odion tests...
now I can enter the download mode.
but recovery mode is not working
Note: there was no Kies when I did this, after that I tried all the things before with kies installed, and with samsung_usb_driver, and still got no success.
Note: Odion recognize my device, download mode is fine.
any help would be apprecciated.
Quite clearly not a "How To", and what was wrong with your other thread?
plz help i9100 dead.
im trying here to make it more clearly
I did't find any help in my last thread, so I tried to be more specific here.
Taken from Intratech's thread http://forum.xda-developers.com/showthread.php?t=1075278
........................
3. Start Odin
4. Click on the PDA button and browse to the .tar file that you extracted in step 1
If the package has more than one .tar archive then they will be labelled with PDA, Phone/Modem and CSC. Just put them in the corresponding section of Odin
5. DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
Anyone ask about .pit file is a moron
Click to expand...
Click to collapse
First thing I notice when looking at your screenshot is that you have ticked re-partition.
Second thing I notice is that you have tried to flash a PIT file.
Maybe that's where you are going wrong??
I found this thread : http://forum.xda-developers.com/showpost.php?p=18961761&postcount=9
this man was unable to flash his device " Odion Fail"
so one of the suggestions was to use another computer, and yeh!! it works for him.
matrex722 said:
im trying here to make it more clearly
I did't find any help in my last thread, so I tried to be more specific here.
Click to expand...
Click to collapse
What was wrong with the replies? You didn't find a magic fix to your problem, which in all honesty, was just you being stupid putting the wrong files into the Odin boxes. If you want a magic fix, send your phone to Samsung and pay for the fix they do.
If you want a normal fix, listen to the replies given in the other thread. Don't start spamming new topics everywhere with the same question just because you don't like the answer. Remember, you killed your phone and others are actually trying to help you fix it....
meranto said:
What was wrong with the replies? You didn't find a magic fix to your problem, which in all honesty, was just you being stupid putting the wrong files into the Odin boxes. If you want a magic fix, send your phone to Samsung and pay for the fix they do.
If you want a normal fix, listen to the replies given in the other thread. Don't start spamming new topics everywhere with the same question just because you don't like the answer. Remember, you killed your phone and others are actually trying to help you fix it....
Click to expand...
Click to collapse
im not talking about replies sir
i was talking about the way i explain the problem
matrex722 said:
im not talking about replies sir
i was talking about the way i explain the problem
Click to expand...
Click to collapse
Then edit your post and topic title
I make mistake during instal ROM 4.0.4 by Odin. I think all system file was deleted.
I reinstall the old ROM but it stop in first screen (Samsung galaxy s2 ) . when I log in recovery mode it Says:
(can't mount /cache/recovery/command
can't mount /cache/recovery/log
can't mount /cache/recovery/last_log)
recovery mood image:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How can solve this problem ?
thank you:fingers-crossed:
flash any stock via ODIN, try one with CORRECT PIT file in it. then flash a matching rooted kernel via ODIN too. then /format system from CWMR, dalvik cache and factory resets, then flash ur rom via CWRM
more info
pelpa87 said:
flash any stock via ODIN, try one with CORRECT PIT file in it. then flash a matching rooted kernel via ODIN too. then /format system from CWMR, dalvik cache and factory resets, then flash ur rom via CWRM
Click to expand...
Click to collapse
Thank you
can you guide me :
How to get the correct PIT? and from where?
video or text help me to do the step
HRiyami said:
Thank you
can you guide me :
How to get the correct PIT? and from where?
video or text help me to do the step
Click to expand...
Click to collapse
Here the steps. When i get to work i ll try to find a rom with a pit in it.
1 download the rom
2 unzip it. U ll find 3 files one goes. Open odin and place one in pda, one in csc and the other in pit (when i have the link with the file i ll tell u which one in which place)
3 put your cell in dowbload mode ( hold volume down+ menu button+powerbutton till "samsung gt-i9100" screen appears)
4 Connect it to pc, in odin you ll see that everything is fine when u get a yellow rectangle
5 Press start and wait till the phone reboots it self
6 root your phone (i think u know how, if not tell me and ill help u too)
Sent from my GT-I9100 using xda premium
thank you
pelpa87 said:
Here the steps. When i get to work i ll try to find a rom with a pit in it.
1 download the rom
2 unzip it. U ll find 3 files one goes. Open odin and place one in pda, one in csc and the other in pit (when i have the link with the file i ll tell u which one in which place)
3 put your cell in dowbload mode ( hold volume down+ menu button+powerbutton till "samsung gt-i9100" screen appears)
4 Connect it to pc, in odin you ll see that everything is fine when u get a yellow rectangle
5 Press start and wait till the phone reboots it self
6 root your phone (i think u know how, if not tell me and ill help u too)
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
My phone work.:laugh: thank you my friend:highfive:
HRiyami said:
My phone work.:laugh: thank you my friend:highfive:
Click to expand...
Click to collapse
great! nice i could help you! i'm glad
now stick around and help some others
guys, my phone has been FINE for ages on I9300XXBLG8 ..then on friday while charging off my laptop ..i pull the plug and boom, it force restarts.
and has been doing so ever since ... just gets stuck at that very 1st galaxy s3 logo.
tried flashing the rom again ...odin fails saying no pit file found .... ditto flashing a kernal ...
looked around net and tried flashing a pit file ... odin log says > Re-Partition operation failed ....
anybody been able to fix something like this....? i have a few pit files i've found ..none seem to work.
are they rom specific ?
sun-drop said:
guys, my phone has been FINE for ages on I9300XXBLG8 ..then on friday while charging off my laptop ..i pull the plug and boom, it force restarts.
and has been doing so ever since ... just gets stuck at that very 1st galaxy s3 logo.
tried flashing the rom again ...odin fails saying no pit file found .... ditto flashing a kernal ...
looked around net and tried flashing a pit file ... odin log says > Re-Partition operation failed ....
anybody been able to fix something like this....? i have a few pit files i've found ..none seem to work.
are they rom specific ?
Click to expand...
Click to collapse
Why are you trying to repartition your phone..PIT-Partition Information Table..is used for partitioning the flash memory of your device.. flash the firmware as PDA with repartition checked off..
Sent from my GT-I9300 using xda app-developers app
zoot1 said:
Why are you trying to repartition your phone..PIT-Partition Information Table..is used for partitioning the flash memory of your device.. flash the firmware as PDA with repartition checked off..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
because trying to flash the normal way just gets me a "no pit file" error in odin.
and i can't get to recover ...
ok sorta progress .. trying to flash CWM recovery via odin3 1.85 gets me a progress bar at least ...but it's hung ... but thats the first progress bar ive seen on my phone afrter two days of trying ... might power off and see whats happens ..
nope...nand write fail :/
how is the phone now? still not working?
So what is the status now? your phone recovered or not?
I have the same problem
I have the same problem
What I already tried
I have it on another usb port (nothing):crying:
And other PC :crying:
And others type ODIN :crying:
And 5 other pit files :crying:
And other firmware Roms from XDA And Sammobile :crying:
It remains no pit file partitioning or no re-partitioning :crying:
Taxi341 said:
I have the same problem
What I already tried
I have it on another usb port (nothing):crying:
And other PC :crying:
And others type ODIN :crying:
And 5 other pit files :crying:
And other firmware Roms from XDA And Sammobile :crying:
It remains no pit file partitioning or no re-partitioning :crying:
Click to expand...
Click to collapse
Exactly same here!! Died today whilst charging - tried everything the OP did but nothing works.:crying:
Calpol said:
Exactly same here!! Died today whilst charging - tried everything the OP did but nothing works.:crying:
Click to expand...
Click to collapse
I'm a noob of android, but i can try this: http://forum.xda-developers.com/showthread.php?t=1840030
??i've got a stock galaxy s3, can only work in download mode :crying:
try this set but follow the screenshots carefully. If not... join the club, search for "sudden death" thread in General section, then, service can be your only option.
http://forum.xda-developers.com/showthread.php?p=31827683
i9.0.1.3k galaxy imperator
I've tried your rescue firmwere but odin return me always the same error, what can i do?only samsung service i think... :crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi, my friend's s3 is stuck on a bootloop (I guess)
I tried flashing through odin an official stock rom from the Philippines downloaded from SamMobile
(I9300XXUGNA5_I9300OLBGNB1_XTC)
but it always failed first attempt was like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://dl-1.va.us.xda-developers.com/2/8/1/3/6/3/2/s3.jpg?key=Tj5GRb3UvyE4DodynB_WbA&ts=1403537759
it was stuck for a long time and it failed
second was
http://dl-1.va.us.xda-developers.com/2/8/1/3/6/3/4/s31.jpg?key=SoUMDDJWbJAdsxo0EWL5Iw&ts=1403537810
I retried many times (restart pc, changing ports, and install drivers)
and one thing I noticed is when I connected the phone to pc the wondersharego software says
http://dl-1.va.us.xda-developers.com/2/8/1/3/6/3/3/s32.jpg?key=nNYeD2yvhQubpdRUDHobWQ&ts=1403537810
but the thing is on the battery slot the sticker said its GT-I9300
NOTE this is a Original product by Samsung (I know how to identify one)
I can only enter Download mode
by the way there are some small texts written on the upper left of the screen
Product Name: (blank)
Custom Binary Download : No
Custom Binary : Samsung Official
System Status : Custom
what should be the problem? I honestly don't have any ideas left
chaosreign09 said:
Hi, my friend's s3 is stuck on a bootloop (I guess)
I tried flashing through odin an official stock rom from the Philippines downloaded from SamMobile
(I9300XXUGNA5_I9300OLBGNB1_XTC)
but it always failed first attempt was like this
http://dl-1.va.us.xda-developers.com/2/8/1/3/6/3/2/s3.jpg?key=Tj5GRb3UvyE4DodynB_WbA&ts=1403537759
it was stuck for a long time and it failed
second was
http://dl-1.va.us.xda-developers.com/2/8/1/3/6/3/4/s31.jpg?key=SoUMDDJWbJAdsxo0EWL5Iw&ts=1403537810
I retried many times (restart pc, changing ports, and install drivers)
and one thing I noticed is when I connected the phone to pc the wondersharego software says
http://dl-1.va.us.xda-developers.com/2/8/1/3/6/3/3/s32.jpg?key=nNYeD2yvhQubpdRUDHobWQ&ts=1403537810
but the thing is on the battery slot the sticker said its GT-I9300
NOTE this is a Original product by Samsung (I know how to identify one)
I can only enter Download mode
by the way there are some small texts written on the upper left of the screen
Product Name: (blank)
Custom Binary Download : No
Custom Binary : Samsung Official
System Status : Custom
what should be the problem? I honestly don't have any ideas left
Click to expand...
Click to collapse
Blank product name usually means you need a new motherboard..You can try rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << but I doubt it will work..I suggest service repair
tallman43 said:
Blank product name usually means you need a new motherboard..You can try rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << but I doubt it will work..I suggest service repair
Click to expand...
Click to collapse
Thanks for that! I downloaded another stock from another country but it still not working
Currently downloading that restoration package hope it will work
tallman43 said:
Blank product name usually means you need a new motherboard..You can try rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << but I doubt it will work..I suggest service repair
Click to expand...
Click to collapse
I downloaded it from the thread ... the 4.3 one ... there's only 4 files the pit file is missing so I can't use it
flashed other stocks still not working
Search that thread, the pit file has been posted several times.
Sent from my GT-I9300 using Tapatalk
The product name is wrong alr. Most probably wrong file flashed by user.
Sent from my GT-I9300 using XDA Free mobile app
hi
i bought a new galaxy s6 edge phone
in lable of back of phone . its show : G925F
when phone its on , in setting , its show : G925F
BUT : when i go in download mode , its show : G925A !!!!
problem is : now phone hang on samsung logo
what should i do now ? flash g925f firmware ? flash g925a firmware ?
i flashed g925a firmware ( removed boot files of firmware first ) and it say : Fail !
i flashed g925f firmware too ( removed boot files of firmware ) and it say : Fail !
what should i do now ?
can you help me please
alishadlou said:
i flashed g925a firmware ( removed boot files of firmware first ) and it say : Fail !
i flashed g925f firmware too ( removed boot files of firmware ) and it say : Fail !
what should i do now ?
Click to expand...
Click to collapse
What do you mean by "removed boot files of firmware" ?
If you have a boot problem, that should not have to be done.
In order to get the most quality support possible, please be as detailed as you can. The mopre details the faster and easier the solution.
Flashed with ODIN? Firmwares from Sammobile?
Nice regards.
.
Kdio said:
What do you mean by "removed boot files of firmware" ?
If you have a boot problem, that should not have to be done.
In order to get the most quality support possible, please be as detailed as you can. The mopre details the faster and easier the solution.
Flashed with ODIN? Firmwares from Sammobile?
Nice regards.
.
Click to expand...
Click to collapse
Yes
Flashed With Odin , firmware downloaded from sammobile
i mean , becuase i didnt know what should i do , i exracted firmware files , then only create tar file with system.img ( if wrong boot file , phone dont lose boot )
alishadlou said:
becuase i didnt know what should i do , i exracted firmware files , then only create tar file with system.img ( if wrong boot file , phone dont lose boot )
Click to expand...
Click to collapse
You already lost boot dude. No point in removing what you need to be overwritten.
ALWAYS flash the entire Firmware and only after make your desired replacements.
To speedup your Sammobile experience, if you already didn't ...
[TOOL] SamFirm
Kdio said:
If you have a boot problem, that should not have to be done.
Click to expand...
Click to collapse
Nice regards.
.
boot problem , mean phone dead , no action , but i can enter : download mode , recovery mode , and all of this
i mean what firmware i should write to phone ? g925a ? or g925f ?
it show g925a in download mode , but its show g925f in phone setting , but hang on logo now
help me please .. .
Re flash stock firmware and dont mess around with the files. Go with G925F and see how it goes
in download mode its show G925A
What should i do now ? what rom i need to flash ?
help me please ...
i found 4 file firmware for G925A
I Write it , Finish 100% , after samsung logo , it show black screen , and nothing !!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
blue notification light is not blinking , its just blue
alishadlou said:
i found 4 file firmware for G925A
I Write it , Finish 100% , after samsung logo , it show black screen , and nothing !!
blue notification light is not blinking , its just blue
Click to expand...
Click to collapse
are you success to fix it.actually, i have the same problem.