Hello guys,
I open a new post because I have not found solutions.
I attached and detached the USB cable and the battery several times to try to get into the S / W Upgrade mode.
Suddenly the phone screen is not turned on. I can no longer access the S / W Upgrade mode. I tried to connect it with the USB to the PC and detects it but after three seconds you disconnect, then again begins again and goes on for a couple of minutes until no longer be detected.
The PC tells me it can not recognize the device.
Someone what can you do?
Thanks and sorry for my bad English.
Related
Hello Comunity
I´ve got a problem with my galaxy player.GP-Y70 International Version :crying:
It doesn´t connect with the pc when i pluged in the usb of any pc, i´ve tried several pc´s, and the pc never recognize that i have just pluged in a device and the GP just get to charge but never shows up usb Connection, i also tried many usb cables 2 from samsung devices and 1 from motorola but nothing, the weird thing is that i just finished installing root with the superoneclick and when i rebooted into download mode to install cwm Odin didnt recognized it (i have all the drivers installed, and so Kies) then i rebooted into Android and my nightmares started, the usb connection is dead (for now) i can charged it, but i cant see it on any pc, i been searchin all over the web and found nothing,
BTW this Galaxy Player had the same problem before but my sister says she found a page where it said that she had to enter to download mode then to recovery mode and select the first option, and then she doesn´t remember and that it worked for her, but the page or the proceedure she followed is nowhere to be found. Also it had the problem that it just refused to charge the battery and it would just drained to death, so i left it several days charging with my Nexus 10 two amp charger until one day charged 100% :victory: and scince then it was fine.
So please help me!! :crying:
it turns out that i opened my galaxy player and cleaned out the main board with alcohol and closed it, so when i connected the player to the pc in download mode windows recognized it back again!
Hopefully this is useful to somebody and if it is, please let me know, if you need help to open your GP, i´ll make a video on how to ... if you ask me to
Hello to everyone!I received an OTA update to my Lenovo P70-A it has been installed without any issues.After hour or two i saw that my IMEI is invalid and started to have issues with my network connection.I decided to go back on 4.4 KIT-Kat which worked perfectly.I flashed it somehow and after that my phone is bricked no screen no light no vibrate no nothing it just KEEPS connecting and Disconnecting via usb and i hear sounds of connect and disconnect also i see that it connects as preleoader vcom usb and after that mtk USB port com 5 .From what i read it's called a META MODE but i cannot go out of it it keeps connecting and disconnecting with my pc on different ports and nothing. Please help i saw many videos how to get out of this META MODE but i really couldn't achieve this.
https://www.dropbox.com/s/q1x223rxqjyqkps/mtk.png?dl=0
Please anyone share experience with me my phone is dead i only hear usb sound and nothing else i cannot recover restore anything.What kind of mode is this i really can't get out of it
Hey, I got wiko ridge 4g that was bricked, it won't turn on but the light is blinking when battery is not full when i connect him on charger. I have connected the phone with PC via USB and he recognized him as 'qhsusb_bulk', i tried to unbricked it with SRK Tool 2.0, but i can't turn on usb debbuging and i don't know if the phone is rooted or not, but i did it anyway. So i managed to delete partitions with that program, but later the phone was recognized as Unknown USB Device. So my question is : is there any other way to brick the phone back, without phone being turned on, via PC ?
Thank you very much.
muki22 said:
Hey, I got wiko ridge 4g that was bricked, it won't turn on but the light is blinking when battery is not full when i connect him on charger. I have connected the phone with PC via USB and he recognized him as 'qhsusb_bulk', i tried to unbricked it with SRK Tool 2.0, but i can't turn on usb debbuging and i don't know if the phone is rooted or not, but i did it anyway. So i managed to delete partitions with that program, but later the phone was recognized as Unknown USB Device. So my question is : is there any other way to brick the phone back, without phone being turned on, via PC ?
Thank you very much.
Click to expand...
Click to collapse
Hm, nobody answered to this ,so i keep digging out on internet,and after some searching i use the qfil app, also i downloaded original stock rom for my wiko ridge 4g, through qfil i installed that rom , the pc in one point recognized my device as 4g ridge, but then just started to showing quallcomm hs-usb diagnostic mode 9092 when it connected to PC via USB. My phone show some signs ,screen was black but it vibrating, and a assume it's turned on when i press touch screen or volume changer button he reproducing sound, but on pc he is readed like quallcomm hs-usb diagnostic mode 9092! If somebody know how to fix that problem, please answer me!
Hey guys,
I tried to root my SM-G930F and I probably have used the wrong ROM.
When I turn it on I got the following message:
"An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software.".
Problem:
Phone will turn on just if it is connected to the charger/PC. (Otherwise the screen will be always dead black).**
**If connected to PC it will power off in 30 seconds or less.
OBS:
1. Phone NEVER turn off while connected to the CHARGER.
2. If connected to the PC it will turn off after 30 seconds, no matter if I'm in the message screen or in download mode.
Already:
3. Tried several cables (Including stock cable).
4. Tried to charge the phone.
5. Tried to remove SD card and SIM card.
6. Tried other USB ports and a USB Hub with external power source.
Any help would be great!
Thanks for reading and have a great day.
Did you tried to flash fast in odin stock image ? Did you tried with other charger ?
Hi,
maybe one of the experts can help...
I have a LEMAX2 with X820_20S_ROW_CUOCO92 ROM.
Since half a year or so the USB-Connection to the PC does not work anymore. Tried several cables and several PCs, no change.
I can boot the phone in RECOVRY Mode, but it It shuts itself off immediately.
I can enter fastboot mode, but the phone is still not recognized by the PC.
When I connect the phone via MyPhoneExplorerClient, WLAN works, but MyPhoneExplorerClient says 'USB-Cabel 'Not conneced.'
When I unplug and re-plug the USB-Cable, for a short time MyPhoneExplorerClient says 'USB-Cabel 'conneced', but no setting option for USB configuration can be found and after a second or so MyPhoneExplorerClient shows 'USB-Cabel Not conneced' again.
I tried to find out how to change or repair the firmware but all howtos require a USB Connection.
Mayby I accidentaly removed some system software responsible for the USB Connection?
Any idea?
:crying:TWSMS