I am running the latest nightly of RR Rom 5.8.1 and
My gyroscope stopped working !
This is what happened:
I was running cm14.1 !
My phone suddenly rebooted itself !
Then i booted twrp and wiped cache and dalvik cache !
And rebooted my phone ! After reeboting !
My gyroscope stopped working !
I can say this as auto rotate doesnt work and in racing games like nfs no limits the tilt controls do not work !
And also from then my proximity sensor also stopped working !
Then I wiped everything and installed latest nightly of RR Rom ! It was in vain as even in this rom both the sensors stop working !
Plz help !
Thanks in advance !
Are you using last firmware and/or SuperSU? I had your issued, SuperSU was the problem, and try to update your firmware because Gyroscope didn't worked for me on MIUI even without SuperSU
MurdererFight said:
Are you using last firmware and/or SuperSU? I had your issued, SuperSU was the problem, and try to update your firmware because Gyroscope didn't worked for me on MIUI even without SuperSU
Click to expand...
Click to collapse
Oh ! I will try that thanks !
MurdererFight said:
Are you using last firmware and/or SuperSU? I had your issued, SuperSU was the problem, and try to update your firmware because Gyroscope didn't worked for me on MIUI even without SuperSU
Click to expand...
Click to collapse
Thanks mate !
Now everything is working fine !
But su is not updating so I left it like that !
Saraf Vikyath said:
Thanks mate !
Now everything is working fine !
But su is not updating so I left it like that !
Click to expand...
Click to collapse
Which version of SU are you using? I remember that 2.79 fixed this issue, or anyway you can use in-built root of Resurrection Remix
MurdererFight said:
Which version of SU are you using? I remember that 2.79 fixed this issue, or anyway you can use in-built root of Resurrection Remix
Click to expand...
Click to collapse
Yeah i am using the built-in one !
I tried to update it coz when i was running cm14.1
Hashtag symbol showed up when i was using built-in root !
But in rr there seems no problem ! So yeah all good !
Related
Hi Guys
need Help i have installed latest CM13 Final Build .......
after the CLEAN installation i try to use Android Auto App ..but after starting the app Start Screen comes 1 sek and the closes the app:crying:
can anyone try Android Auto app ? please give me your experience
thx Chris
You are right, it has never worked in CM13.
Deepflex wrote that the drivers have some problems. I think it will never gonna work but its strange because on stock it works well.
regards
I Can only tell that it Works on latest Eragon
Sent from my P9000 trough Tapatalk
I rooted my LG G5 and installed Fulmics ROM 2.0 and running on Android 7.0 and using magisk as my superuser. Now I have a problem with my settings app. It just crashes and once this happens I have to restart the phone to get it working again for a while. I tried wiping cache and davlic cache by TWRP but problem wasn't fixed. How can I fix this problem?
Thanks.
Guys I would really appreciate some help on this. ??
mike.bss said:
Guys I would really appreciate some help on this.
Click to expand...
Click to collapse
install latest fulmics rom
akki7636 said:
install latest fulmics rom
Click to expand...
Click to collapse
Yes I just did. Thanks again.
I found oreo and pie roms for our ultra on androidfilehost but after flashing I am not able to get the touch working. I think its a recovery issue, but the twrp-3.1.1 uploaded by zawzaw doesn't mount my system read/write, so no luck. Can anyone test the roms please? Also is there newer version of twrp available for our device?
Here is the link
https://androidfilehost.com/?w=search&s=togari
I want to test it but mw z ultra cant get a single twrp working, is there a way to flash it without twrp?
billyliem said:
I want to test it but mw z ultra cant get a single twrp working, is there a way to flash it without twrp?
Click to expand...
Click to collapse
Have you tried 3.0.2-0? That has been working for me on my C6833.
Yes, it is not working for me
Hello does the rom working? I cant install it because i cant have TWRP working in my device
Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check
Rom tester
Hello
First of all thank you for your work, we really appreciate it, i have a suggestion, please make a Telegram group so we can join and test the rom and tell you the bugs and issues, thank you again
Which Kernel to use with this Rom?
raschad said:
Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check
Click to expand...
Click to collapse
the custom rom of the android pie will be continued ?, and I think you could do a post of your roms I think it would give a good revival in this forum and release the source code of the roms and the kernel
raschad said:
Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check
Click to expand...
Click to collapse
I tried the last build of your oreo version, after i had done this solution to fix the touch issue https://forum.xda-developers.com/xp...t/fix-fix-touch-roms-6-0-6-0-7-x-8-x-t3884411
I run the rom for half a day, and the touch worked fine using the solution above, i only had problem with the sim card, the rom doens't recognize it so i can't have mobile network and make calls, and i lost my imei too, another problem that i ran to was that the camera didn't worked too.
beside that i didn't have any problem, but i came back to RR 5.8.3 since i couldn't use mobile network in this rom.
I would love to at least have a custom Android rom oreo stable and functional but by the way it will take a little longer for this to happen
...
I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no work even in the recovery.
Jaime albino said:
I tried the last build of your oreo version, after i had done this solution to fix the touch issue https://forum.xda-developers.com/xp...t/fix-fix-touch-roms-6-0-6-0-7-x-8-x-t3884411
I run the rom for half a day, and the touch worked fine using the solution above, i only had problem with the sim card, the rom doens't recognize it so i can't have mobile network and make calls, and i lost my imei too, another problem that i ran to was that the camera didn't worked too.
beside that i didn't have any problem, but i came back to RR 5.8.3 since i couldn't use mobile network in this rom.
Click to expand...
Click to collapse
phhuang said:
I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no work even in the recovery.
Click to expand...
Click to collapse
Same Here , flashed the fix , and no touchscreen response after boot
phhuang said:
I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no
work even in the recovery.
Click to expand...
Click to collapse
pvillasuso said:
Same Here , flashed the fix , and no touchscreen response after boot
Click to expand...
Click to collapse
i wasn't using those roms anymore because in the oreo version the camera doesn't work and mobile network too, the
9.0 version didn't work either, it's always in bootloop, but i flashed the oreo version again and the touch fix
using philz recovery and twrp and the touch worked like a charm as i said you just need to wait a few seconds, the
purpose of this fix is to fix the touch problem within the rom and not in the recovery, if your recovery doesn't
have touch is not something that this fix or i can do sorry. But i can guarantee that this fix works in this oreo
version because i tested it myself after a clean flash, please try again and tell me if it worked for you.
Hi, everyone! I'm compilled new ROM
Android 9.0 - AOSP Extended 6.1 for Togari
I dont know how working touchscreen.
Check it
DOWNLOAD
install error 7 in TWRP?
raschad said:
Hi, everyone! I'm compilled new ROM
Android 9.0 - AOSP Extended 6.1 for Togari
I dont know how working touchscreen.
Check it
DOWNLOAD
Click to expand...
Click to collapse
phhuang said:
install error 7 in TWRP?
Click to expand...
Click to collapse
Yep same to me.
Malle355 said:
Yep same to me.
Click to expand...
Click to collapse
Open on PC through WinRar and edit
META-INF/com/google/android/update-script
And delete the top 3 lines (getprop...)
raschad said:
Open on PC through WinRar and edit
META-INF/com/google/android/update-script
And delete the top 3 lines (getprop...)
Click to expand...
Click to collapse
Its booting but touch not working. Tried to flash the touch_fix.zip but not working.
someone needs to compile a new twrp recovery for us, xperia z ultra orphans
I have an unlocked bootloader. The fingerprint is not working on any custom rom when I tap on fingerprint nothing happens, it don't even show any messege.
It is working correct on stock rom.
I tried pixel experience, lineage os, aosp extended and all other roms.
I have tried flashing stock rom then other custom rom but it's still not working.
Any suggestion is appreciated.
Thanks
krishna.rag said:
I have an unlocked bootloader. The fingerprint is not working on any custom rom when I tap on fingerprint nothing happens, it don't even show any messege.
It is working correct on stock rom.
I tried pixel experience, lineage os, aosp extended and all other roms.
I have tried flashing stock rom then other custom rom but it's still not working.
Any suggestion is appreciated.
Thanks
Click to expand...
Click to collapse
I am able to add one but same problem for another finger.
if I added second user than fingerprint didn't work.
i also tried in most of ROMs but same problem.
1. Clean fingerprint scanner
2. Change firmware
3. Delete fingerprints from android folder, reboot
I think that firmware has a problem too. I recently experience some clean flash on any pie rom that has a problem with FP at times
kamalder said:
I am able to add one but same problem for another finger.
if I added second user than fingerprint didn't work.
i also tried in most of ROMs but same problem.
Click to expand...
Click to collapse
Yeah, I am just using a single user still not able to add even a single fingerprint.
amnher said:
I think that firmware has a problem too. I recently experience some clean flash on any pie rom that has a problem with FP at times
Click to expand...
Click to collapse
I tried latest global beta and latest stable but still facing the same.
If you tell me which one worked for you then I'll be very thankful. ?
mindblower01 said:
1. Clean fingerprint scanner
2. Change firmware
3. Delete fingerprints from android folder, reboot
Click to expand...
Click to collapse
Tried not working.
But one thing that I have observed is whenever I add another user it works for the other user and in guest mode as well but only not working for admin user.
I had the same issue. I downloaded older version of the gapps and I fix the issue.
flash this file from twrp i think your problem will be solved
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
Thanks buddy, it worked
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
REALLY GOOD JOB. THANKS A LOT! I spend more than a week looking for a solution.
It's working. Thank you very much. My was working partially, now this perfect, rom AOSP Extended Pie.
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
Thank you sir! It is working again (Arrow-v9.0-mido-OFFICIAL-20190327)
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
really thanks dude. It works. thanks again!
Thank you so much
Thank you so much, fingerprint scanner now works
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
Thanks a ton
Worked for me . Iam using the CAF version of pixel experience (15/06)
mindblower01 said:
1. Clean fingerprint scanner
2. Change firmware
3. Delete fingerprints from android folder, reboot
Click to expand...
Click to collapse
I'm sorry I'm new to this, may I know how to change the firmware
Update,, I found the answer, I can flash it after the Rom
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
Thanks a lot working perfectly.:laugh::laugh:
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
Thanks alot brother
was searching for this for the last 3 days
thank you soo much
i tested many ways , many Roms and kernels , with encryption and without!
just with flashing this , it solved
I installed pixel experience (not caf) rom today on my poco F1 and the look and feel is great..but when I'm using it the touch isnt working sometimes it stucks. Only fix is to lock and unlock phone again ..then after couple minutes the issue will appear again need help
I have the same issue
If anyone knows how to fix this please help me!! Much appreciated
What version of the vendor did you flash?
It needs to be higher than 9.2.15
riseofsand said:
What version of the vendor did you flash?
It needs to be higher than 9.2.15
Click to expand...
Click to collapse
beryllium-9.4.1-9.0
I am using pixel experience CAF version and vendor 9.4.1... there is no touch issues .. try CAF version and clean flash it
This happens for me too whenever I have TWRP recovery installed, with any ROM (both stock *and* custom ones). I only get this behaviour when entering my SIM cards PIN code or when booting TWRP (I can't swipe so I must turn the screen off, wait for about 5 seconds, then turn it in again)
On PE aosp u can flash miui kernel and fix it! Idk about caf.
What touch panel do you have? check out my thread https://forum.xda-developers.com/poco-f1/help/damn-screen-freezes-t3912069
vamshikailasa said:
I am using pixel experience CAF version and vendor 9.4.1... there is no touch issues .. try CAF version and clean flash it
Click to expand...
Click to collapse
Did u use aosp version? What is the most stable ? Most battery efficient? More smooth? Can u tell me answers for each questions? Thanks alot
Mooatreides said:
On PE aosp u can flash miui kernel and fix it! Idk about caf.
What touch panel do you have? check out my thread https://forum.xda-developers.com/poco-f1/help/damn-screen-freezes-t3912069
Click to expand...
Click to collapse
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
Is it correct?
u wont face any touch issues if u use 9.3.28 kernel, only stock kernel has no issues with touch, idk if pe will boot with it or not... try it yourself, bt i am sure that 9.3.28 has the best touch drivers.
gigishan said:
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
Is it correct?
Click to expand...
Click to collapse
Well try man and see, go for aosp
U can just take the boot.img from miui also only. On PE
FINALLY!!!!
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
ITS WORKING NOW - YET I'LL LET KNOW IF THE ISSUE STILL EXISTS SOMEHOW THANK YOU EVERYONE WHO HELPED ME
gigishan said:
FINALLY!!!!
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
ITS WORKING NOW - YET I'LL LET KNOW IF THE ISSUE STILL EXISTS SOMEHOW THANK YOU EVERYONE WHO HELPED ME
Click to expand...
Click to collapse
MAZAL TOV man! enjoy the good life with no freezes lol. Its like having a tooth hurt forever and you forgot what normal was, then all of a sudden no freezing screen pain hahah!
Mooatreides said:
MAZAL TOV man! enjoy the good life with no freezes lol. Its like having a tooth hurt forever and you forgot what normal was, then all of a sudden no freezing screen pain hahah!
Click to expand...
Click to collapse
Hahaha yeah man thank u so much for the help
gigishan said:
FINALLY!!!!
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
ITS WORKING NOW - YET I'LL LET KNOW IF THE ISSUE STILL EXISTS SOMEHOW THANK YOU EVERYONE WHO HELPED ME
Click to expand...
Click to collapse
I already have PE aosp installed with 9.5.8-9.0 vendor-firmware on my Poco F1. Is it alright to flash just the MIUI kernel (kernel-beryllium_global_9.4.8-ak2.zip) and nothing else?
Or do I need to repeat the whole flashing firmware / installing PE OS thing?
Mariorio said:
I already have PE aosp installed with 9.5.8-9.0 vendor-firmware on my Poco F1. Is it alright to flash just the MIUI kernel (kernel-beryllium_global_9.4.8-ak2.zip) and nothing else?
Or do I need to repeat the whole flashing firmware / installing PE OS thing?
Click to expand...
Click to collapse
Just flash the kernal alone you will be fine
Will just leave it here. Hope someone finds it useful.
I fixed the screen freeze issue using the vendor-firmware and kernel fix on the links below:
Files:
beryllium-9.4.12-9.0-vendor-firmware.zip
kernel-beryllium_global_9.4.12-ak2.zip
Links here.
Also, I am on Lineage OS, latest build.
Thank you for this thread!
gigishan said:
FINALLY!!!!
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
ITS WORKING NOW - YET I'LL LET KNOW IF THE ISSUE STILL EXISTS SOMEHOW THANK YOU EVERYONE WHO HELPED ME
Click to expand...
Click to collapse
Same problem here since couple of weeks. Flashed these using lastest build of Nitrogen OS and everything is working fine so far! Thank you
Mooatreides said:
MAZAL TOV man! enjoy the good life with no freezes lol. Its like having a tooth hurt forever and you forgot what normal was, then all of a sudden no freezing screen pain hahah!
Click to expand...
Click to collapse
Edu Lezcano said:
Same problem here since couple of weeks. Flashed these using lastest build of Nitrogen OS and everything is working fine so far! Thank you
Click to expand...
Click to collapse
Will these vendor and kernel combo work for the latest Pixel Experience update(05082019)?