Hello,
Previously, I was using a OnePlus 5.
This phone had the ability on Oxygen OS to disable one sim-card.
This was very nice and important for me.
Currently my Pocophone runs on Lineage OS 16, and it seems not possible to disable one sim-card.
Is there an app our a way to disable one sim-card?
I would like to use this every day, because I don't need to be available for my work after the office hours.
If there isn't an app, cli is also fine.
If somebody is running Miui stock and it's possible there, please let me know.
Also if you're running on Miui stock, are the bluetooth hickups solved when listening to audio on your car radio, streamed through bluetooth?
Hello. There is no ANT Hal Service on Android Pie, which is responsible for wireless radio communication (Radio Service ANT) Android devices with third-party gadgets using ANT + technology. I tried to transfer this service from oreo, but it does not work. ANT + is very important to me, but for some reason this service is absent on all androyd pie including all rom's custom. Who can help with the solution of this issue.
Here too. Ant+ has dissapear! Terrible.
Enviado desde mi POCOPHONE F1 mediante Tapatalk
Me too
Went for a run this morning and my heartrate monitor wouldn't connect... Ant+ checker apps say there's no built-in ant installed.
I’m talking about this and saying that ANT + does not work on all the firmware on the 9th android both on miui 10 stable and beta, as well as on all custom. And no one talks about this, except for me, as if no one uses ANT + except me.
Question to the creators of the firmware. How to make ANT+ work on Android 9 Pie.
chumack said:
Question to the creators of the firmware. How to make ANT+ work on Android 9 Pie.
Click to expand...
Click to collapse
I have problem too. No function ANT+ with watch Garmin. Please help!
Does the Poco have an ANT sensor built in? Did it work with Oreo roms? I just checked with an App and it told me that there is no ANT sensor built into this device (MIUI global stable, Pie 10..13)
daun20 said:
Does the Poco have an ANT sensor built in? Did it work with Oreo roms? I just checked with an App and it told me that there is no ANT sensor built into this device (MIUI global stable, Pie 10..13)
Click to expand...
Click to collapse
On Android 8.1 oreo ANT+ works, and on 9 Android does not work see my posts above. The sensor ANT+ have poco f1 there is.
Hey guys, I would like to start a discussion about the Android Auto and it's issues on the latest ROMs for k20/9t pro. For instance I find it barely working on latest pixel experience but the January version of this rom is not affected.
I consider Android auto as must be as well as correct notification that's why I have chosen custom rom.. but now I'm at the crossroads.
What seems to be a problem? Is there any hope for positive future implementation of this app?
I believe there were no topics like this If so let me know.
I don't know why xiaomi phones have such problems with android auto, in custom roms it doesn't work also in all xiaomi roms (global, stable, beta, eu, china...) If you enable dual app it stop working and it does that in every xiaomi phone(to be exact mi mix 3, mi8, k20 pro is the same scenario)
It's not Xiaomi phone's fault , android auto is not working in many other custom , I had Google pixel 2 xl as well, and it was running on havoc os and still android auto were not working in that model.
It's google problem poor programators like in M$
Sometimes, when I plug the phone, media controls (on steering wheel) don't work, and Spotify doesn't show on screen, and I need to unplug and plug again the phone for getting them to work.
Except this, I don't have other problems.
Sorry for the off-topic, but how about MirrorLink? Is it still only compatible with Samsung, Sony, and Nokia phones? It would be great to be able to mirror screen to my 10" in-car screen. My last 3-4 phones had luck only with Android Auto, and some of them barely worked. 2020, and there's still no proper communication standard (wireless preferably) between Android phones and cars.
Is CyanogenMod the only ROM for Touchpad that has bluetooth enabled? I've been using Evervolv but it seems that bluetooth still is not functioning there.
jo15765 said:
Is CyanogenMod the only ROM for Touchpad that has bluetooth enabled? I've been using Evervolv but it seems that bluetooth still is not functioning there.
Click to expand...
Click to collapse
From all the available Android ROM from this guide:
https://forum.xda-developers.com/hp-touchpad/general/hp-touchpad-optimize-android-swap-t3901773
WiFi works on all ROMs:
Bluetooth works on:
Kitkat , Lollipop and Nougat.
It all depends what features of Bluetooth is been use. Is an old hardware it has it limitations.
For File transfer it is best to use WiFi, take a look here:
https://forum.xda-developers.com/hp-touchpad/help/bluetooth-file-transfer-t4111579
HP_TOUCHPAD said:
From all the available Android ROM from this guide:
https://forum.xda-developers.com/hp-touchpad/general/hp-touchpad-optimize-android-swap-t3901773
WiFi works on all ROMs:
Bluetooth works on:
Kitkat , Lollipop and Nougat.
It all depends what features of Bluetooth is been use. Is an old hardware it has it limitations.
For File transfer it is best to use WiFi, take a look here:
https://forum.xda-developers.com/hp-touchpad/help/bluetooth-file-transfer-t4111579
Click to expand...
Click to collapse
I'm wanting to use it for music streaming and bluetooth connect a speaker to stream from pandora/YouTube music.
Do you have a recommend?
Interesting enough, I'm currently on Evervolv which runs Nougat but bluetooth does not work for me.
jo15765 said:
I'm wanting to use it for music streaming and bluetooth connect a speaker to stream from pandora/YouTube music.
Do you have a recommend?
Interesting enough, I'm currently on Evervolv which runs Nougat but bluetooth does not work for me.
Click to expand...
Click to collapse
What version of Evervolv Nougat?
I am referring to 7.1.2 from this guide:
https://forum.xda-developers.com/hp-touchpad/general/hp-touchpad-optimize-android-swap-t3901773
The Tablet does a very good job at streaming and also playing with the loud speakers it has.
I know the Bluetooth works as I use it for the OBDII on the car.
When it comes to music and do not like Bluetooth for its low quality, I use wire AUX connection.
HP_TOUCHPAD said:
What version of Evervolv Nougat?
I am referring to 7.1.2 from this guide:
https://forum.xda-developers.com/hp-touchpad/general/hp-touchpad-optimize-android-swap-t3901773
The Tablet does a very good job at streaming and also playing with the loud speakers it has.
I know the Bluetooth works as I use it for the OBDII on the car.
When it comes to music and do not like Bluetooth for its low quality, I use wire AUX connection.
Click to expand...
Click to collapse
Looking at my settings it shows:
Android Version -> 5.0.2
Kernel version -> [email protected] #1
Thu Mar 19 05:47:08 PDT 2015
okay super old version
Interesting enough - the bluetooth option now seems to be working, but the wifi shows an exclamation point beside it and is not working atm. It was working a few days ago when I was trying to get bluetooth to work.
I'm going to do some googling but I think there was a way I could update directly from the touchpad.
Here I am almost 24 hours later and still unable to get the wifi to connect. Since I am already on evervolv - what steps would I need to take to update to the most recent version sans wifi?
jo15765 said:
Here I am almost 24 hours later and still unable to get the wifi to connect. Since I am already on evervolv - what steps would I need to take to update to the most recent version sans wifi?
Click to expand...
Click to collapse
WiFi works with all ROMs and Bluetooth up to Evervolv 7.1.2
For WiFi to work the router needs to be properly configure and the user must know how to connect to the WiFi network.
By the way, I did try Bluetooth for playing music on a car stereo and works perfectly, hours of playing with no issues. I was very impress!
For the second time, here is a link to all Android ROMs and to flash it to get the most out of it.
https://forum.xda-developers.com/hp-touchpad/general/hp-touchpad-optimize-android-swap-t3901773
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Why Android 11 GO version? According to the Android 11 Go Edition Device Setup Guide, starting with Android 11 all smartphones with 1GB or 2GB of RAM must use Android Go.
Although this tablet has 3 GB of ram memory, this tablet has a technology of 8 years ago, I believe that the Android GO version can run in a responsive way with minimal lag.
In addition, some tweaks were applied to improve the overall performance for this old device.
*This rom is also compatible with SM-P601 but without 3G data network support and Phone.
Working:
> SD-card
> GPS
> S Pen
> WIFI
> Bluetooth
> Sensors
> Audio
> Screen Record
> Camera (just picture)
> IR Sensor
> MTP
> Microphone
Not Working:
> Camera (Video)
*For now there are crashes in certain apps and in certain situations. The rom is only recommended for testing and not for daily use. As the solutions are discovered , they will be applied in future builds .
How to install this ROM:
1. Install TWRP Recovery : twrp-3.5.0_9-0-lt03wifiue
From: https://dl.twrp.me/lt03wifiue/twrp-3.5.0_9-0-lt03wifiue.img.html
2. Wipe Cache, Data and System Partition
3. Install the ROM and Gapps.
I recommend the gapps from https://opengapps.org
ARM/11.0/PICO
4. Reboot
How to update this ROM?
1. Go to TWRP Recovery.
2. Install the Rom and Wipe Cache and Dalvik.
3. Reboot.
Downloads:
Download ROM V1.1
Download ROM V1.0
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Kernel and Device Tree:
n1awifi
n1a-common
universal5420-common
Kernel
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Credits:
My special thanks to everyone involved in the Exynos5420 team and Lineage OS.
Exynos 542X
Android Development for Exynos 5420-Based Devices. Exynos 542X has 63 repositories available. Follow their code on GitHub.
github.com
LineageOS
A free and open-source operating system for various devices, based on the Android mobile platform. This is a mirror of https://review.lineageos.org/ - LineageOS
github.com
Spoiler: Tips and Tricks
1) SafetyNet. Credits @tejljr for the tutorial
https://forum.xda-developers.com/t/...eage-18-1-go-unofficial.4391727/post-86367037
2) For better performance, Disable Interface Animations: Settings -> Accessibility -> Remove Animations
Changelog:
01/23/2022 (ROM V1.1)
> Android Security - January 2022
> Zygote Preforking (Faster App Launch): This feature makes apps launch faster.
> Kernel: Applied some fixes
01/21/2022 (ROM V1.0)
> Initial Release.
> Applied some Tweaks.[/spoiler]
Hi @DanielBR911,
I will give a try in this rom!
I tried yesteday the LuisRom, but my P600 was get TOO hot, and sound crackling on Youtube.
Did you notice some of those in your build?
edu.mariano said:
Hi @DanielBR911,
I will give a try in this rom!
I tried yesteday the LuisRom, but my P600 was get TOO hot, and sound crackling on Youtube.
Did you notice some of those in your build?
Click to expand...
Click to collapse
Hi @edu.mariano,
You should try this rom. I'm using this ROM daily and I'm not having problem with You Tube app, video and audio works normally. Please test this Rom and let me know if you are having any problems.
edu.mariano said:
Hi @DanielBR911,
I will give a try in this rom!
I tried yesteday the LuisRom, but my P600 was get TOO hot, and sound crackling on Youtube.
Did you notice some of those in your build?
Click to expand...
Click to collapse
@ShevT has a build of LOS 17.1 where those sound issues were fixed.
tejljr said:
@ShevT has a build of LOS 17.1 where those sound issues were fixed.
Click to expand...
Click to collapse
Thanks!I going to try this one too!
Many thanks for this. I have installed and it generally seems to be working well.
Glad to see audio working well as it wasn't initially in 17.1 and only recently fixed.
I am using ShevT's 17.1 and he had managed to fix audio issues in 17.1 which I think were being caused by the CPU core control - after the fix the cpu cores run at almost top frequency all the time, even on the interactive governor. The same is happening in this ROM. This makes battery drain significantly higher and charging slow when the device is turned on.
I installed deathly auditor - in the 17.1 rom this allowed to tweaks battery charging current, however these are not yet enabled in the 18.1 kernel.
USB Midi OTG is working well.
My usb soundcard is not working (but was in 17.1) - in android 10 I used the lesser audio switch app to use the tablet speakers and the usb mic to together, but this does not work in android 11 as we are supposed to be able to select usb audio inputs/outputs through volume control - this is not available in the 18.1 go.
I don't think Palm rejection on the spen is working on this. ShevT had fixed this in 17.1.
Some streaming apps are not available on play store (D+ and NF) although this may be because I installed magisk, but this wasn't ever an issue on 17.1.
I will continue to use and test. Thank you for sharing this.
rossco_50 said:
Many thanks for this. I have installed and it generally seems to be working well.
Glad to see audio working well as it wasn't initially in 17.1 and only recently fixed.
I am using ShevT's 17.1 and he had managed to fix audio issues in 17.1 which I think were being caused by the CPU core control - after the fix the cpu cores run at almost top frequency all the time, even on the interactive governor. The same is happening in this ROM. This makes battery drain significantly higher and charging slow when the device is turned on.
I installed deathly auditor - in the 17.1 rom this allowed to tweaks battery charging current, however these are not yet enabled in the 18.1 kernel.
USB Midi OTG is working well.
My usb soundcard is not working (but was in 17.1) - in android 10 I used the lesser audio switch app to use the tablet speakers and the usb mic to together, but this does not work in android 11 as we are supposed to be able to select usb audio inputs/outputs through volume control - this is not available in the 18.1 go.
I don't think Palm rejection on the spen is working on this. ShevT had fixed this in 17.1.
Some streaming apps are not available on play store (D+ and NF) although this may be because I installed magisk, but this wasn't ever an issue on 17.1.
I will continue to use and test. Thank you for sharing this.
Click to expand...
Click to collapse
Change your device fingerprint in MagiskProps to a certified fingerprint in order to get Netflix to show up.
rossco_50 said:
Many thanks for this. I have installed and it generally seems to be working well.
Glad to see audio working well as it wasn't initially in 17.1 and only recently fixed.
I am using ShevT's 17.1 and he had managed to fix audio issues in 17.1 which I think were being caused by the CPU core control - after the fix the cpu cores run at almost top frequency all the time, even on the interactive governor. The same is happening in this ROM. This makes battery drain significantly higher and charging slow when the device is turned on.
I installed deathly auditor - in the 17.1 rom this allowed to tweaks battery charging current, however these are not yet enabled in the 18.1 kernel.
USB Midi OTG is working well.
My usb soundcard is not working (but was in 17.1) - in android 10 I used the lesser audio switch app to use the tablet speakers and the usb mic to together, but this does not work in android 11 as we are supposed to be able to select usb audio inputs/outputs through volume control - this is not available in the 18.1 go.
I don't think Palm rejection on the spen is working on this. ShevT had fixed this in 17.1.
Some streaming apps are not available on play store (D+ and NF) although this may be because I installed magisk, but this wasn't ever an issue on 17.1.
I will continue to use and test. Thank you for sharing this.
Click to expand...
Click to collapse
Are you also noticing that Wi-Fi disconnects randomly? And there’s also no on screen nav buttons
rossco_50 said:
Many thanks for this. I have installed and it generally seems to be working well.
Glad to see audio working well as it wasn't initially in 17.1 and only recently fixed.
I am using ShevT's 17.1 and he had managed to fix audio issues in 17.1 which I think were being caused by the CPU core control - after the fix the cpu cores run at almost top frequency all the time, even on the interactive governor. The same is happening in this ROM. This makes battery drain significantly higher and charging slow when the device is turned on.
I installed deathly auditor - in the 17.1 rom this allowed to tweaks battery charging current, however these are not yet enabled in the 18.1 kernel.
USB Midi OTG is working well.
My usb soundcard is not working (but was in 17.1) - in android 10 I used the lesser audio switch app to use the tablet speakers and the usb mic to together, but this does not work in android 11 as we are supposed to be able to select usb audio inputs/outputs through volume control - this is not available in the 18.1 go.
I don't think Palm rejection on the spen is working on this. ShevT had fixed this in 17.1.
Some streaming apps are not available on play store (D+ and NF) although this may be because I installed magisk, but this wasn't ever an issue on 17.1.
I will continue to use and test. Thank you for sharing this.
Click to expand...
Click to collapse
thanks for the feedback. I think Streaming Video like Disney+ and Netflix is not available on Play store because you are using a custom rom.
tejljr said:
Are you also noticing that Wi-Fi disconnects randomly? And there’s also no on screen nav buttons
Click to expand...
Click to collapse
I noticed that Wifi sometimes disconnects when using 5 GHz. When using 2.4 GHZ, I didn't notice random disconnections.
DanielBR911 said:
thanks for the feedback. I think Streaming Video like Disney+ and Netflix is not available on Play store because you are using a custom rom.
Click to expand...
Click to collapse
I get Netflix and Disney+ to show up when I change over to a certified device fingerprint using the MagiskProps module
tejljr said:
I get Netflix and Disney+ to show up when I change over to a certified device fingerprint using the MagiskProps module
Click to expand...
Click to collapse
Good news : )
tejljr said:
Are you also noticing that Wi-Fi disconnects randomly? And there’s also no on screen nav buttons
Click to expand...
Click to collapse
I am 5 ghz and haven't noticed disconnects yet. I watched a movie streamed over chromecast and no problems during that.
One of my key apps (koala sampler) is crashing as soon as it opens. A previous test version of 18.1 by the exynos team was posted briefly for the p601, but removed as there was a memory issue causing crashes. It was said it would only be available again once this had been fixed. Have you fixed this or do you know if has been fixed in the exynos team sources?
the issues started after I tried to use my usb soundcard, so it could be related to that, but would be good to know if there is still potentially an underlying issue before doing further checking.
rossco_50 said:
One of my key apps (koala sampler) is crashing as soon as it opens. A previous test version of 18.1 by the exynos team was posted briefly for the p601, but removed as there was a memory issue causing crashes. It was said it would only be available again once this had been fixed. Have you fixed this or do you know if has been fixed in the exynos team sources?
the issues started after I tried to use my usb soundcard, so it could be related to that, but would be good to know if there is still potentially an underlying issue before doing further checking.
Click to expand...
Click to collapse
Seems like with this rom, the memory issue hasn’t happened. I’m about to put this rom to the test with everything that I do on a daily. Also got Netflix installed btw
tejljr said:
Seems like with this rom, the memory issue hasn’t happened. I’m about to put this rom to the test with everything that I do on a daily. Also got Netflix installed btw
Click to expand...
Click to collapse
I never got a chance to try the other 18.1 version - did you notice app crashes on it? Certainly the koala app is solid on 17.1 and I'll be going to back to that for now.
rossco_50 said:
I never got a chance to try the other 18.1 version - did you notice app crashes on it? Certainly the koala app is solid on 17.1 and I'll be going to back to that for now.
Click to expand...
Click to collapse
On ShevT’s version of 18.1, there were many app crashes cause of the memory problem. It would get to the point where the system would randomly crash and reboot. So far with this new rom, I haven’t experienced any crashes (yet). There are some features that I do want to see in the next build though. If any errors do come up I’ll pull logs. So far this rom is a step in the right direction. I installed this rom with the Opengapps Super Package.
rossco_50 said:
I never got a chance to try the other 18.1 version - did you notice app crashes on it? Certainly the koala app is solid on 17.1 and I'll be going to back to that for now.
Click to expand...
Click to collapse
The other problem with 17.1 was that video playback in the browser wouldn’t work unless your webview version was v89 or lower. I’m going to see if that is the case with this new rom
tejljr said:
Seems like with this rom, the memory issue hasn’t happened. I’m about to put this rom to the test with everything that I do on a daily. Also got Netflix installed btw
Click to expand...
Click to collapse
Today I tested several apps. So far I've had a problem with Angry Birds 2, but other Angry Birds are working fine.