This is the Recovery Materialized with latest Twrp 3.0.3-0
With high Security and Bugs Fix By Me
If Any one like This recovery let me know.
It is Based on latest Twrp 3.0.3-0
Here are Some Screenshots
This is made by Dragon* ie..Balajisrivastava
Download links Below
TWRP 3.0.3.0 by Dragon®balajisrivastav.zip
it did not work i tried to flash it 2 times but i only get the one that is already installed 3.0.2-8
Related
This is TWRP 3.0.2-0 originally done by @ashyx for SM-A500, then ported to SM-J510 using stock kernel from stock SM-J510F recovery with complete /sbin/* replacement from older SM-J500 because device doesn't like flashing bigger than 13 MBs to the recovery partition or you would end in a recovery bootloop.
Disclaimer: Flashing this gon' trip knox & you lose your (device's) warranty.
Built from official SM-J500F recovery
Kernel & Device Tree from SM-J510F 6.0.1
Flash via ODIN & enjoy
TWRP: https://www.androidfilehost.com/?fid=24591000424944073
I flashed this SuperSU in system-less mode & I was rooted with no (visible) issues. Anything else like backing up, I did try only kernel and it worked.
Recommended Installation Flow:
Flash TWRP via ODIN
Reboot to Recovery (TWRP)
Flash latest SuperSU zip (anything > 2.46)
Thank you for a job!!!:good:
Why you have posted this in J7 Group, this for J5 Model Right?
I flashed Oxygen Recovery and then installed the latest build of H2OS. After the ROM booted up, I flashed TWRP 3.0.2, 3.0.1 and 3.0.0 but none of these boot, i.e., my phone doesn't boot to recovery. What can I do now?
P.S.: Bootloader is unlocked
Found a remedy, flashing the BluSpark's modded version worked. Someone please tell me how to delete this thread :3
Hello All,
Hope you all are doing well.
Recently I installed CM-13 on my One Plus X with TWRP but now when I try installing OxygenOS 3.1.3 via TWRP its giving an error stating zip is corrupted which is not the case but still I re-downloaded the OTA and tried again but still same error. Upon googling found that OxygenOS cannot be installed via TWRP but is that true? Some say that is is possible, please can someone guide me how to install the OxygenOS 3.1.3? Any help would be highly appreciated!
Regards,
Vineeth
If you are using official TWRP then after installing the oos 3.1.3 it should be gone.
So its better to flash oos stock recovery and just flash the oos 3.1.3. after that you can use bluspark modified TWRP recovery.
And yes you can flash oos 3.1.3 by twrp.
Which version of TWRP you are using??
when you flashing the zip, Is it show something like that "This package is for ONEPLUS BUT YOUR IS ONE"
Which version of TWRP you are using?? --> twrp-3.0.2-0
when you flashing the zip, Is it show something like that "This package is for ONEPLUS BUT YOUR IS ONE" ---> Yes, I get this message!
So its better to flash oos stock recovery and just flash the oos 3.1.3. after that you can use bluspark modified TWRP recovery.-------> Please can you provide me some link for for more help??
Which version of TWRP you are using?? --> twrp-3.0.2-0
when you flashing the zip, Is it show something like that "This package is for ONEPLUS BUT YOUR IS ONE" ---> Yes, I get this message!
So its better to flash oos stock recovery and just flash the oos 3.1.3. after that you can use bluspark modified TWRP recovery.-------> Please can you provide me some link for for more help??
See here :
http://forum.xda-developers.com/oneplus-x/help/to-stock-rom-form-cm13-t3472765
Thanks alot Kéno40, will check and try it and get back here with my observations, thnx alot for response and help!!
Hello!
This is my first post. I've searched for hours. Visited over 200 sites and forums tried multiple things installed all available android tools you can find online and i am seriously stuck.
Setup before problem : One Plus X - Cm13 - Version 2016 - Oct - 10. This is updated from the cyanogen website and its treated as the stable version.
Downloaded the latest version which is the 15th and got stuck at bootloop. After some searching i discovered that i had to updated my bootloader as it was the same since November 2015. In the website that i got the new version i was also given the new TWRP version 3.0.2 . So i went into my recovery flashed the new bootloader , then the TWRP , then the new ROM. Mobile boots up shows completly empty fresh install CM 13 without gapps or any of my previously installed programs. Everything is still in the storage. All installation folders from the various programms i had.
My recovery mode refuses to Boot. It just stays on the one plus logo. Tried TWRP manager from the OS but the old version 2.8.7.0 refuses to be unistalled. Adb command lines : I've been trying on windows 10 , 8 , 7 with the appropriate drivers and the only thing that i can make the phone do is go to either FASTBOOT or normal boot. Flashed the TWRP multiple times and no changes what so ever. I can make the mobile show up with ADB device, Fastboot device it shows success and when i try to boot into recovery it just gets stuck. I also got the MTP package from Windows. Basically i bricked my phone within a glass. OS works but Recovery not. Fastboot is supposignly working but i see no changes.
Thank you in advance!
Install original stock recovery then 2.2.3. If you want to use ashwins cm13,cm14 from here on out and a couple other ROMs required updated bootloader. You achieve this by flashing 3.1.3 Oxygen OS. After you updated your bootloader only twrp you can use is blusparks latest v41 or Nichets twrp. On a side note 2.8.7 twrp is old 3.0.2 is latest.
Exodusche said:
Install original stock recovery then 2.2.3. If you want to use ashwins cm13,cm14 from here on out and a couple other ROMs required updated bootloader. You achieve this by flashing 3.1.3 Oxygen OS. After you updated your bootloader only twrp you can use is blusparks latest v41 or Nichets twrp. On a side note 2.8.7 twrp is old 3.0.2 is latest.
Click to expand...
Click to collapse
Thank you i managed yesterday from a program to flash twrp as kernel and was rebooted into a working twrp and fixed everything from there.
TeamWin Recovery Project 3.2.3
WARNING #1: Flashing a custom recovery voids your warranty. I'm not responsible for misuse of the recovery which make soft brick the phone.
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
FEATURES
1. SUPPORT SD CARD IN RECOVERY !
2. DATA RESTORATION SUCCESSFULLY FROM ROM BACKUP .
3. DUALBOOT PATCHER SUPPORT. ( STOCK ROM: DO NOT UPDATE RAMDISK AS STOCK KERNEL CONTAIN ENCRYPTION !!! )
HOW-TO INSTALL
Flash it via old twrp and restart to recovery.. enjoy
SUPPORTED DEVICES
SM-G316HU
vivalto5mve3g
(Test your Device, if you want to take the risk )
CAUTION !!!
FLASH THIS RECOVERY WITH TWRP APP OR PREVIOUS TWRP
Latest TWRP Download
Updated Link Shared In Next Post.
Contributors
Omni 5.1.1 Minimal Twrp Source
Ubuntu 16.04
Google
HWDEV
****
More Information Given Later
XDA:DevDB Information
TWRP RECOVERY, Recovery for the Samsung Galaxy Ace 4
Contributors
HWDEV, Google
Kernel Special Features: Updated
Version Information
Status: Stable
Current Stable Version: 3.2.3
Stable Release Date: 2018-10-09
Created 2018-10-08
Last Updated 2018-10-28
TWRP 3.2.3 From Latest Sources By TWRP BUILDER
Fixed By HWDEV
TWRP_3.2.3
Twrp materialised using auto materialised tool
Twrp materialised