recently i have installed aosp AEX official rom, and i observed that in available 10 gb internall memory, it has consumed 4.4 gb for system.
so, i would like like to ask if any one tried this rom just post here about how much internal memory is consumed for your system. And if possible share your screen shots thank you.
Navin9 said:
recently i have installed aosp AEX official rom, and i observed that in available 10 gb internall memory, it has consumed 4.4 gb for system.
so, i would like like to ask if any one tried this rom just post here about how much internal memory is consumed for your system. And if possible share your screen shots thank you.
Click to expand...
Click to collapse
Redmi note 3 consumes for about 4 gb for /system and rest for your personal storage.
i.e if you install OS other than miui it will consume much less space but if you install miui os it will consume 3.5 gb approximately and miui is heavily bloated.
Related
Hi Everyone,
I just installed the official cm 10.1.3 on my 16 GB Nook. Everything is working fine. But, then when I checked the device info, I noticed that the RAM in my nook has been reduced and it is displaying my ram as just 671 MB instead of 1 GB . How can I get my full ram back ? Please anyone help!
mynook said:
Hi Everyone,
I just installed the official cm 10.1.3 on my 16 GB Nook. Everything is working fine. But, then when I checked the device info, I noticed that the RAM in my nook has been reduced and it is displaying my ram as just 671 MB instead of 1 GB . How can I get my full ram back ? Please anyone help!
Click to expand...
Click to collapse
That is the full amount of RAM. The system reserves the remainder for the GPU.
Fuzi0719 said:
That is the full amount of RAM. The system reserves the remainder for the GPU.
Click to expand...
Click to collapse
Thanks for the info. I request the moderator to remove this thread.:angel:
Hi everyone I hope everything is going great ...
I just want to know why there is a limited custom roms for the Kate version. And is there any thing to do to move apps to SD card ...
And is there any kernels that work good to the Kate variant . I am speaking about the 2 GB RAM device .
Every ROM that works for Kenzo also works for Kate. In some cases you will need to flash Kate firmware before flashing a Kenzo ROM.
Apps cannot be moved to SD card anymore. It was Google's decision. Some apps will allow you to save data on your SD card (like navigation apps, music or video apps).
You have to find out which kernel suits you best. It depends whether you prefer battery life or performance and which features are important for you.
Thanks man
Noter2017 said:
Every ROM that works for Kenzo also works for Kate. In some cases you will need to flash Kate firmware before flashing a Kenzo ROM.
Apps cannot be moved to SD card anymore. It was Google's decision. Some apps will allow you to save data on your SD card (like navigation apps, music or video apps).
You have to find out which kernel suits you best. It depends whether you prefer battery life or performance and which features are important for you.
Click to expand...
Click to collapse
I just need more info plz about the Google decision and how to install ad choose the best kernel
I just wanted to know that what are the hardware requirements to upgrade to a new android version , lets say lollipop..
My phone has 4gb interñal memory and 780mb ram , is that enough to run lollipop (im running on kitkat now) , If yes than how much memory will be left after upgrading to lollipop?
It's not hardware matters, as long as latest ROM available for your device, then go for it. If you're mentioning stock rom, it depends on your manufacturer that releasing firmware upgrade or not.
May I ask what are you trying to achieve?
R324D said:
It's not hardware matters, as long as latest ROM available for your device, then go for it. If you're mentioning stock rom, it depends on your manufacturer that releasing firmware upgrade or not.
May I ask what are you trying to achieve?
Click to expand...
Click to collapse
hi R324D , i am using galaxy core 2 SM-G355H , running on kitkat , ive rooted it and installed a TWRP on it and was thinking to upgrade to lollipop but it only have 4gb internal memory , just wanted to know that is it enought run lollipop on it? coz i have another phone running on lollipop and 3.48 gb is reserved as system memory , and if we do the maths , will I be left with just 520 mb ? If yes then should I upgrade to Android L?
Thanks!
ayu321 said:
hi R324D , i am using galaxy core 2 SM-G355H , running on kitkat , ive rooted it and installed a TWRP on it and was thinking to upgrade to lollipop but it only have 4gb internal memory , just wanted to know that is it enought run lollipop on it? coz i have another phone running on lollipop and 3.48 gb is reserved as system memory , and if we do the maths , will I be left with just 520 mb ? If yes then should I upgrade to Android L?
Thanks!
Click to expand...
Click to collapse
I don't think that's how it works, System partition different each device, it's not fixed. Idk, but usually it takes 20-30% of internal storage for system partition.
Moreover, unless you already altered your system partition, you shouldn't worry about that.. Lets rom handle system partition automatically. Another option you can use external sdcard for extra storage, I admit 4gb is to small for int storage.
Hello dear Community,
I am wondering that the size of the Firmware (Memory&Storage > Firmware) is 12,67 GB large.
Is that the case in any of the STF-L09 Models with the latest updates?
This seems to me as a huge waste of the available storage, since I am using two SIM Cards.
Is there any way to reduce this size?
I would be grateful for any confirmation or reply.
Thanks, Veduuu
Yes, system takes a lot of space, it's normal
Thanks for the confirmation!
My old 2nd gen Moto G uses around 3,5 GB for system files and necessary apps with LineageOS. I am just wondering what the additional 9 GB is used for in a Honor 9.
How big is Firmware size running a custom ROM (e.g. LineageOS for Honor 9) ?
Thanks in advance
veduuu said:
Thanks for the confirmation!
My old 2nd gen Moto G uses around 3,5 GB for system files and necessary apps with LineageOS. I am just wondering what the additional 9 GB is used for in a Honor 9.
How big is Firmware size running a custom ROM (e.g. LineageOS for Honor 9) ?
Thanks in advance
Click to expand...
Click to collapse
Custom ROMs take less than the Stock Firmware (EMUI)
I have no experience in port Rom.
I used as base the work from Seiryu.2i of miui forum, including the kernel.
It made everything simpler.
Apps deleted: mishop, mipicks, miforum, micommunity, gmail, googlemovies, googlemusic, googlehangouts.
Requirements:
Lollipop bootloader
TWRP installed.
mandatory: System Partition with 2GB of space. You can resize system Here.
first boot 10 minutes.
Warnings:
I am not responsible for bricked devices or dead SD cards.
Use at your own risk.
Downloads:
MIUI Global Stable 64bit V9.5.2.0 (MIUI 9.5):
https://www.androidfilehost.com/?fid=11050483647474830588
MIUI Global Beta 64bit V8.4.19 (2018-04-19) equivalent MIUI 9.6:
https://www.androidfilehost.com/?fid=11050483647474830746
The android is old, but I hope it's useful to someone.
Sorry my English.
kernel source:
https://github.com/cecell3000/android_kernel_xiaomi_msm8916/tree/MIUI-BR-v001
.
Anyone tried this on 1gig ram version ?
I tried in my 1gb version ... But bad news, the device stopped n the start screen (the first, static mi.com screen/i wait 4 20m), try with TWRP 3.2.1.0 and 3.2.1.1 (firmware 9.2.5.0). The installation is very fast for a file of this size (30 to 40 seconds), and apparently the system partition stay in the original size,1GB. I'll try again, download the image again.
joaomaiolo said:
I tried in my 1gb version ... But bad news, the device stopped n the start screen (the first, static mi.com screen/i wait 4 20m), try with TWRP 3.2.1.0 and 3.2.1.1 (firmware 9.2.5.0). The installation is very fast for a file of this size (30 to 40 seconds), and apparently the system partition stay in the original size,1GB. I'll try again, download the image again.
Click to expand...
Click to collapse
is in the first post: mandatory: System Partition with 2GB of space. You can resize system Here.
after I will update the update-script of rom, to prevent devices with system partition less than 2GB install by mistake.
Can u send screenshot of notification panel
thanks for sharing, the battery life like this? you are from Brazil
Update: added new ROM
MIUI Global Beta 64bit V8.4.19 (2018-04-19) equivalent MIUI 9.6:
Cecell3000 said:
Update: added new ROM
MIUI Global Beta 64bit V8.4.19 (2018-04-19) equivalent MIUI 9.6:
Click to expand...
Click to collapse
The question to install the update how can I do, complete reset? Wipe completo
Cecell3000 said:
Update: added new ROM
MIUI Global Beta 64bit V8.4.19 (2018-04-19) equivalent MIUI 9.6:
Click to expand...
Click to collapse
What are the differences between this beta and the last released official beta for Redmi 2? If you don't mind me asking Buddy. Do we get new recents along with other added features?
Is there any chance that you will pick up MIUI 10 for a release? Thanks in advance!
rem3rem3 said:
Is there any chance that you will pick up MIUI 10 for a release? Thanks in advance!
Click to expand...
Click to collapse
I also hope so
Bug
This rom's bettery backup is good,but bettery charging is very slow.
Plzz fixx it my mobile charge in 3-3½ hour's it receive only 100-510Ma only
Mayankrane said:
This rom's bettery backup is good,but bettery charging is very slow.
Plzz fixx it my mobile charge in 3-3½ hour's it receive only 100-510Ma only
Click to expand...
Click to collapse
Bro is this with the global stable? Or you tried both? Cause the beta is what I tried. The battery backup is good, but have a problem with slowing down at random and I haven't tried even the slightest gaming. After 2 Antutu runs, the GPU score comes in at 600 and the phone gets hot. Whilst Oreo roms manage 1100 and Nogat Dot Os and viper manage 1500-1600 with Zetsubou. There I go rambling again, I meant to ask, is your usage better with the 9.5 stable? (if that's what you tested) And how is it looking on Antutu? If you don't mind sharing.
Cecell3000 said:
I have no experience in port Rom.
I used as base the work from Seiryu.2i of miui forum, including the kernel.
It made everything simpler.
Apps deleted: mishop, mipicks, miforum, micommunity, gmail, googlemovies, googlemusic, googlehangouts.
Requirements:
Lollipop bootloader
TWRP installed.
mandatory: System Partition with 2GB of space. You can resize system Here.
first boot 10 minutes.
Warnings:
I am not responsible for bricked devices or dead SD cards.
Use at your own risk.
Downloads:
MIUI Global Stable 64bit V9.5.2.0 (MIUI 9.5):
https://www.androidfilehost.com/?fid=11050483647474830588
MIUI Global Beta 64bit V8.4.19 (2018-04-19) equivalent MIUI 9.6:
https://www.androidfilehost.com/?fid=11050483647474830746
The android is old, but I hope it's useful to someone.
Sorry my English.
kernel source:
https://github.com/cecell3000/android_kernel_xiaomi_msm8916/tree/MIUI-BR-v001
.
Click to expand...
Click to collapse
Dev,willing you make a miui10 for redmi2？
How you got miui 9.5 for redmi 2 .?..as i know 9.2 is the last official update for redmi 2..
Please tell me which phone you used as base?
---------- Post added at 08:40 AM ---------- Previous post was at 08:39 AM ----------
Bap062 said:
How you got miui 9.5 for redmi 2 .?..as i know 9.2 is the last official update for redmi 2..
Click to expand...
Click to collapse
He ported a rom for the device from another device of 64bit