Related
My phone is dead dead.... Failed flashing kdz, now it doesn't do anything... What do I do???? Non of those steps worked.
sikario.prk said:
My phone is dead dead.... Failed flashing kdz, now it doesn't do anything... What do I do???? Non of those steps worked.
Click to expand...
Click to collapse
Hmmm, does removing the battery, reinserting it and pressing Back + Volume Up + Power at least produce the yellow Emergency mode screen?
Flash lg 10b stock rom with the help of kdz in emergency mode...
Sent from my LG-P500 using XDA App
yeah it will help u out jst tke out ur battery for few sec thn switch ur phone in emergency mode n connect with kdz n flash any lg 10.b. 10d rom
sikario.prk said:
My phone is dead dead.... Failed flashing kdz, now it doesn't do anything... What do I do???? Non of those steps worked.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=883314 follow this guidee nads make sure u have taken necessary precaution while flashing from kdz everything is mentioned in downgrading the phone in the link here http://forum.xda-developers.com/showthread.php?t=1038338
Was a flashing fail error. I left the phone without battery all night, and still nothing. PC doesn't detect it, or nothing.
sikario.prk said:
Was a flashing fail error. I left the phone without battery all night, and still nothing. PC doesn't detect it, or nothing.
Click to expand...
Click to collapse
Care to answer my question?
doktornotor said:
Hmmm, does removing the battery, reinserting it and pressing Back + Volume Up + Power at least produce the yellow Emergency mode screen?
Click to expand...
Click to collapse
Did and nothing, even left phone without battery all night. No emergency mode, or anything
sikario.prk said:
Did and nothing, even left phone without battery all night. No emergency mode, or anything
Click to expand...
Click to collapse
Well. RMA it then, nothing we could do here.
doktornotor said:
Well. RMA it then, nothing we could do here.
Click to expand...
Click to collapse
I'm kinda noob here, whats RMA? And, can I take it to warranty?
sikario.prk said:
whats RMA? And, can I take it to warranty?
Click to expand...
Click to collapse
RMA and claim warranty is the same thing.
doktornotor said:
RMA and claim warranty is the same thing.
Click to expand...
Click to collapse
Oh, lol, thanks.
Talked with a support agent from LG, they gave me an Authorization number that a have to write on the shipping box with the phone... Lets see what happens
If you have the TMo optimus T, use the V10L kdz file. The flashing utility has a force mode that WILL work even if the computer does not detect the phone. You just have to make sure that nothing else is plugged into the USB port, and that your phone will power up.
I've bricked my phone 3 times now fiddling with removing stuff from the LIB directory from the stock rom (stupid me) and have always been able to recover it.
crashff said:
If you have the TMo optimus T, use the V10L kdz file. The flashing utility has a force mode that WILL work even if the computer does not detect the phone. You just have to make sure that nothing else is plugged into the USB port, and that your phone will power up.
I've bricked my phone 3 times now fiddling with removing stuff from the LIB directory from the stock rom (stupid me) and have always been able to recover it.
Click to expand...
Click to collapse
KDZ updater?
I think it was. I'll have to dig out the file from my android stuff when I get home.
V10L_00.KDZ file and the english KDZ_FW_UP program.
the mode used was CS EMERGENCY.
crashff said:
I think it was. I'll have to dig out the file from my android stuff when I get home.
V10L_00.KDZ file and the english KDZ_FW_UP program.
the mode used was CS EMERGENCY.
Click to expand...
Click to collapse
Ok, pop me a msg, my last option to revive it, is sending it to LG
Did a conversion to original 2.2.2 V10q with KDZ and when turning on the phone, it didn;t turn on (as expected). Not responding at all. Power, button combination or some @#@# like that - not working. So, sent it to LG Service through VDF Romania 4 days ago and now i have a new PCB with new IMEI and a fully working P500. So, that was my solution for meddling with updaters, ROM's, etc. and forgetting to disable LGE Modem in Device Manager (it was late at night)
I just got a new LG g3 yesterday. Worked fine for about an hour. Started crashing. Green Screen with crash handler with options to reboot or dump. It would boot up and then crash again. Also received a Kernel crash black screen. So I decided to flash new dll file and tot file using lg flash tool. Put into stock download mode (firmware update Screen) and started flash. Went to 19% the screen went black acted like it turns off and disconnects and fails. Tried 4 different cords with not very different results. the furthest it got was 49%. Now it is stuck in firmware update screen. I remove battery and turn on phone it goes to lg boot screen and then firmware update. If the phone is off and I plug into wall charger the screen shows battery symbol with spinning thing and then firmware update screen comes on. Please help. Thanks for any input in advance.
chelstromj said:
I just got a new LG g3 yesterday. Worked fine for about an hour. Started crashing. Green Screen with crash handler with options to reboot or dump. It would boot up and then crash again. Also received a Kernel crash black screen. So I decided to flash new dll file and tot file using lg flash tool. Put into stock download mode (firmware update Screen) and started flash. Went to 19% the screen went black acted like it turns off and disconnects and fails. Tried 4 different cords with not very different results. the furthest it got was 49%. Now it is stuck in firmware update screen. I remove battery and turn on phone it goes to lg boot screen and then firmware update. If the phone is off and I plug into wall charger the screen shows battery symbol with spinning thing and then firmware update screen comes on. Please help. Thanks for any input in advance.
Click to expand...
Click to collapse
I had to replace two g3s bad software
Sent from my LGLS990 using XDA Premium HD app
got an update on my problem. I re downloaded tot file and dll file and tried again got to 94%. it booted showed android guy for a sec and then booted again and showed miniOS with music looking bars moving up and down and then showed blue screen with Factory reset status and a big red number 2. not 3. help please.
If i try to turn it on it gives me the same thing mini OS and then Factory reset status big red number 2
chelstromj said:
got an update on my problem. I re downloaded tot file and dll file and tried again got to 94%. it booted showed android guy for a sec and then booted again and showed miniOS with music looking bars moving up and down and then showed blue screen with Factory reset status and a big red number 2. not 3. help please.
If i try to turn it on it gives me the same thing mini OS and then Factory reset status big red number 2
Click to expand...
Click to collapse
This should get you going now. http://forum.xda-developers.com/showthread.php?p=54912191
engine95 said:
This should get you going now. http://forum.xda-developers.com/showthread.php?p=54912191
Click to expand...
Click to collapse
Thanks I will re download from these and try again.
chelstromj said:
Thanks I will re download from these and try again.
Click to expand...
Click to collapse
You don't need to dl the .tot. Just maybe the generic .dll. Although the regular one should work.
Mainly it's just ticking "board dl that's different.
engine95 said:
You don't need to dl the .tot. Just maybe the generic .dll. Although the regular one should work.
Mainly it's just ticking "board dl that's different.
Click to expand...
Click to collapse
Looks like click the box for board dl worked. I'll update after I play with it a bit. Thanks all.
Still problems
I'm getting to different crash screens now. A green one that say Demigod crash handler:tz and a black screen about a kernal crash. Any ideas on these issues?
You got it yesterday, just take it back and get a new one.
Sent from my LGLS990 using Tapatalk
chelstromj said:
I'm getting to different crash screens now. A green one that say Demigod crash handler:tz and a black screen about a kernal crash. Any ideas on these issues?
Click to expand...
Click to collapse
Both those screens are kernel issues. They were common with the granddad of this phone... Optimus G.
You should just reboot and be good. If not, then maybe you need to run Flashtool again.
I'm not a fan of Flashtool. But I guess our other option, LGNPST, isn't an option anymore.
Other than that, maybe go with the above post.
engine95 said:
Both those screens are kernel issues. They were common with the granddad of this phone... Optimus G.
You should just reboot and be good. If not, then maybe you need to run Flashtool again.
I'm not a fan of Flashtool. But I guess our other option, LGNPST, isn't an option anymore.
Other than that, maybe go with the above post.
Click to expand...
Click to collapse
Lg and sprint are telling me they will not take it back without proof of purchase. I bought it off a local person. Their upgrade that they wanted cash for instead of using. It was sealed supposedly unused. Sprint store said that the demigod one means its been rooted and can not help me. I am very frustrated and know just enough about this stuff to only get in trouble.
Is there more i can Flash? Or more Software I can replace to get rid of the issue. As I have flashed tot file and dll file 30 or so times. With no better result. I don't want a $500 paper weight. Thanks for all the help so far.
Maybe try flash tool with a different pc. My laptop works great but my other pc doesn't work as well. Worth a shot.
chelstromj said:
Lg and sprint are telling me they will not take it back without proof of purchase. I bought it off a local person. Their upgrade that they wanted cash for instead of using. It was sealed supposedly unused. Sprint store said that the demigod one means its been rooted and can not help me. I am very frustrated and know just enough about this stuff to only get in trouble.
Is there more i can Flash? Or more Software I can replace to get rid of the issue. As I have flashed tot file and dll file 30 or so times. With no better result. I don't want a $500 paper weight. Thanks for all the help so far.
Click to expand...
Click to collapse
The Demigod happens even when not rooted if I remember right. I think Sprint was just being lazy.
Go to that thread I linked earlier by fergie, and grab both dll's. Generic and Sprint.
I know you don't want to do it again but it's your only way to hopefully get it working.
I'll see if I can get an md5sum for the tot to make sure you have it right. I'll post it here in a minute.
Edit: md5sum for LS990ZV4_04.51101.tot - 8cee4b3dd55ec6405d03805bc1061459
I know its worked for me a few times. And both dll's should work just fine.
engine95 said:
The Demigod happens even when not rooted if I remember right. I think Sprint was just being lazy.
Go to that thread I linked earlier by fergie, and grab both dll's. Generic and Sprint.
I know you don't want to do it again but it's your only way to hopefully get it working.
I'll see if I can get an md5sum for the tot to make sure you have it right. I'll post it here in a minute.
Edit: md5sum for LS990ZV4_04.51101.tot - 8cee4b3dd55ec6405d03805bc1061459
I know its worked for me a few times. And both dll's should work just fine.
Click to expand...
Click to collapse
What would the generic dll do if I have not modified anything?
chelstromj said:
What would the generic dll do if I have not modified anything?
Click to expand...
Click to collapse
I've used both and had no issues with either one.
Depending how they unlock the bootloader, I think we'll all end up having to use the generic.
same issue
Hello did you ever get it fixed ? i have the exact same problem. I was able to talk to lg today and im going to send it in for service . They said they dont need proof of purchase since the phone is only a couple of months old so its still under warranty please let me know if you have any info that can help me before i send it in.
i have a lg optimus l90 and i took my battery out for literally 1 minute and then put in back in and started charging it. it turned back on with a black screen saying "firmware update do not unplug the USB connection until the process is complete" its been like this for about 5minutes now and its still at 0%. can someone please tell me what to do? help!
Okay so my phone randomly rebooted 2 days ago and when it got to the LG logo screen it froze. I tried to hard reset it, i went in to the hard reset menu clicked yes once then confirmed the hard reset by selecting yes a second time and the phone froze on highlighted yes. I have pulled the battery and tried to do this multiple times to no avail. So next i went to my PC and started google searches. Often i found things such as being stuck in boot loop which my phone wasn't, it was just frozen at the LG logo screen. Regardless I like to think of myself as self educated tech savvy (which now from reading all of your posts im not, im not even a little bit, in fact im tech stupid.) I did follow post through to the LGUP tool and downloaded a stock KDZ and got my phone into download mode>firmware update screen, i was able to get al the correct drivers and get LGUP to recognize the device and i loaded the stock KDZ and tried to do a Complete wipe reinstall. The program as able to interact with my device and went through the process, i thought i had fixed my phone. After a fresh install(or what i thought was a fresh install) i rebooted after the update and went to the LG logo screen and froze. The only difference is now when my phone starts, right before the LG logo appears i get the green android robot with what looks like open working "guts" real quick before it goes to the Logo and freezes. So back to the drawing board and i wanted to attempt some of the things ive seen like TWRP recovery etc but here i am getting lost. Forgive me if im posting things that have been answered but i keep getting confused. I dont know what the difference is between fastboot boot loader recovery mode or any of that is. also i kept noticing time and time again that my phone has to be in USB debugging mode and i dont know if it is. I cant turn my phone on to get it into USB debugging mode now anyways. Im okay with my warranty being voided and im okay with rooting if thats what i have to do to make it work. I have installed ADB and fastboot and some twrp recoveries etc but im clueless. Lastly know that i never Rooted my phone or anything but i was a torrent downloader. forgive me im triyng to provide as much information as possible.
PLEASE NOTE - I had to sign up to post here obviously and i loved how it said if you have an IOS go buy an android and come back LOL
Message Tung Kick. He can get u out of anything
Hit thnx if this helpd
tried
joshualuna said:
Message Tung Kick. He can get u out of anything
Hit thnx if this helpd
Click to expand...
Click to collapse
i tried to message tung kick and it said user not found?
sjeffreysmith said:
i tried to message tung kick and it said user not found?
Click to expand...
Click to collapse
Use Messenger on FB
i appreciate the resonse
joshualuna said:
Use Messenger on FB
Click to expand...
Click to collapse
is that the name to search for on fb? "tung kick"
sjeffreysmith said:
is that the name to search for on fb? "tung kick"
Click to expand...
Click to collapse
Try again on here but lower case and name is one whole wrd. tungkick
joshualuna said:
Try again on here but lower case and name is one whole wrd. tungkick
Click to expand...
Click to collapse
not having luck with him yet but ill keep trying. is there any other posts or something you could point me towards?
sjeffreysmith said:
not having luck with him yet but ill keep trying. is there any other posts or something you could point me towards?
Click to expand...
Click to collapse
http://forum.xda-developers.com/tmobile-lg-v10/development/debrick-phone-h901-qualcomm-9008-t3440359
This thread by him may help.
jsu718 said:
http://forum.xda-developers.com/tmobile-lg-v10/development/debrick-phone-h901-qualcomm-9008-t3440359
This thread by him may help.
Click to expand...
Click to collapse
SD card my only option?
Lg G3 has been stuck for months in a endless bootloop. Lg logo, vibrates, powers off then back to lg logo, repeat forever! I am able to get to the download mode screen and flash firmware and yet, after flashing it goes threw the whole process i mentioned at the begenning of this thread. Is there anyone out there experianced the same problem that i have? What is the fix? Better yet is there anyone out there with the Knowledge to fix this issue ive tried everything i can think of and help is needed!!!!
Alek4620 said:
Lg G3 has been stuck for months in a endless bootloop. Lg logo, vibrates, powers off then back to lg logo, repeat forever! I am able to get to the download mode screen and flash firmware and yet, after flashing it goes threw the whole process i mentioned at the begenning of this thread. Is there anyone out there experianced the same problem that i have? What is the fix? Better yet is there anyone out there with the Knowledge to fix this issue ive tried everything i can think of and help is needed!!!!
Click to expand...
Click to collapse
Have you tried to flash a TOT or a KDZ? TOT flashes a lot more of the partitions and usually can fix these type of issues. We need more information such as:
Model number. Does it end in a K? (Look at the label in the battery compartment). If it does end in a K, you cannot downgrade to a version before Marshmallow, so you're basically stuck on 47A or 48A.
Are you trying to flash a TOT or KDZ?
What version are you trying to flash back to?
I have tried both tot and kdz from 10b to 47a. All done in download mode. It's shown that the download was successful but , ha, lg g3 vs985w will reboot and do the same thing over and over . Also the led light doesn't come on at all.
Alek4620 said:
I have tried both tot and kdz from 10b to 47a. All done in download mode. It's shown that the download was successful but , ha, lg g3 vs985w will reboot and do the same thing over and over . Also the led light doesn't come on at all.
Click to expand...
Click to collapse
Did the phone just start doing this all of a sudden a few months ago or were you trying something with it? How old is the phone? It sounds like it could be a hardware failure.
Alek4620 said:
Lg G3 has been stuck for months in a endless bootloop. Lg logo, vibrates, powers off then back to lg logo, repeat forever! I am able to get to the download mode screen and flash firmware and yet, after flashing it goes threw the whole process i mentioned at the begenning of this thread. Is there anyone out there experianced the same problem that i have? What is the fix? Better yet is there anyone out there with the Knowledge to fix this issue ive tried everything i can think of and help is needed!!!!
Click to expand...
Click to collapse
Battery? Try a different one and see. I have a bad battery that does the same thing as yours is doing rt now.
You can also try plugging it into a charger while it is booting and see if it makes it through the boot process. If so, definitely get a new battery...or 2.
ok, the phone randomly downloaded a new update from verizon. It was 6.0.1 mm! Durring the update it had incurred an error and the update would not finish. it said dont remove battery until the update was finished. so me the rule follower left it there for like 4hours and was still showing that error message which for the life of me i cant remember. i pulled the battery and tried to restart the phone and made it to logo screen and then vibrate then power off. No led in the upper left corner and no nothing but an endless bootloop
i also thought that it might be the battery so i bought a double pack brand new when this happened and tried that and nothing same effect.
Quick question, dont know if worded right but could the bootloader somehow be corrupted? led not working???
plugged in usb and the battery with loading circle poped up and no movement from circle or percentage of charge battery has
which program did you use when you flashed the TOT ?
posted by RTB last resort for Verizon VS985w
Alek4620 said:
i also thought that it might be the battery so i bought a double pack brand new when this happened and tried that and nothing same effect.
Quick question, dont know if worded right but could the bootloader somehow be corrupted? led not working???
Click to expand...
Click to collapse
Damn... I was hoping it'd just be a simple battery replacement fix
So has it booted since you did the RTB last resort fix?
& did you TOT or KDZ? Just double checking because a TOT should've fixed you up; KDZ's don't have all the files a TOT has.
One more time...try putting it into download mode and use the LG flash tool to flash the 10b TOT from here... http://forum.xda-developers.com/verizon-lg-g3/development/tot-vs985-10b-share-t2832488
Hopefully it boots and you can go from there.
I also have boot loops,
I was going to sell this so wanted to return to stock but it was my mistake not carefully reading the post and flashing one of ota G2 file. I just followed KDZ method for stock 12B but it still has boot loops.
vbrookie said:
I also have boot loops,
I was going to sell this so wanted to return to stock but it was my mistake not carefully reading the post and flashing one of ota G2 file. I just followed KDZ method for stock 12B but it still has boot loops.
Click to expand...
Click to collapse
Read the previous post regarding TOT versus KDZ. TOT still might not fix it but it might. If it doesn't, you might have to try forcing it into QHSUSB_BULK 9008 mode (thread for that in the General section).
roirraW "edor" ehT said:
Read the previous post regarding TOT versus KDZ. TOT still might not fix it but it might. If it doesn't, you might have to try forcing it into QHSUSB_BULK 9008 mode (thread for that in the General section).
Click to expand...
Click to collapse
Thanks before I try TOT method, I will give my other computer a shot. It worked one time but, this could be my laptop issue having all the crappy things installed from work and personal. Other laptop is kind of clean. If all fails I will investigate TOT after QHSUSB_BULK 9008 mode.
vbrookie said:
Thanks before I try TOT method, I will give my other computer a shot. It worked one time but, this could be my laptop issue having all the crappy things installed from work and personal. Other laptop is kind of clean. If all fails I will investigate TOT after QHSUSB_BULK 9008 mode.
Click to expand...
Click to collapse
FYI TOT is easier than QHSUSB_BULK 9008 mode (which requires TOT too but is way more involved). Good luck, let us know how it goes!
TOT worked for me. I just had difficulty in finding right dll file for it and one I tried from other post worked for me.
Now that I am done upgrading it to MM with KDZ since I had all the files downloaded, I am starting to have second thoughts on selling this now. Damn thing is smooth as butter and it feels like it can still go head to head with many of today's mid range phones...
but tough choice have to be made. It will be deeply sad to see my G3 go... :'(
vbrookie said:
TOT worked for me. I just had difficulty in finding right dll file for it and one I tried from other post worked for me.
Now that I am done upgrading it to MM with KDZ since I had all the files downloaded, I am starting to have second thoughts on selling this now. Damn thing is smooth as butter and it feels like it can still go head to head with many of today's mid range phones...
but tough choice have to be made. It will be deeply sad to see my G3 go... :'(
Click to expand...
Click to collapse
Glad you solved it.
If you re-TOTed, rooted and put @xdabbeb 's VS985 v3.1.1 ROM on, based on the latest stock 48A, you'd probably be even more tempted to keep using the phone.
---------- Post added at 07:01 PM ---------- Previous post was at 06:59 PM ----------
@Alek4620 any update, any luck?
havnt even learned to crawl!!!!!!!!!!!!!!
I hate MY life
to be perfectly honest i have no idea what i am doing!
roms twrp boot whatever. i have no idea what any of that means
i find a post and follow the directions the best i can and for some freason i cant get my damn phone to come back on
i need help eating from the bottle because obviously i have no idea what im doing. baby steps over here and im falling all over the place
someone PLEASE bring life back to my LG G3
the thread for the tool and the drivers are no longer working]
Alek4620 said:
the thread for the tool and the drivers are no longer working]
Click to expand...
Click to collapse
The thread isn't working, the download links aren't working, or what? I thought you already had the files downloaded and you just hadn't had luck yet flashing them?
Try these to help diagnose your trouble:
http://forum.xda-developers.com/showthread.php?p=67945841
http://forum.xda-developers.com/showthread.php?p=68040923
http://forum.xda-developers.com/showpost.php?p=68098895&postcount=1470
Hang in there.
Hello,
I've got an V10 H961N HKG and i used bridge to update to android 7.0 however that won't work.
Then i rolled back to 6.0 and it worked again.
then i updated to 7.0 with uppercut and i get the same problem. can it be fixed?
When on 7.0 it goes to erasing for just a second and then shows the lg logo and then the animation but the lg animation keeps crashing and restarting the phone.
I tried both 30A and 30B variants no result.
TrueFawkes said:
Hello,
I've got an V10 H961N HKG and i used bridge to update to android 7.0 however that won't work.
Then i rolled back to 6.0 and it worked again.
then i updated to 7.0 with uppercut and i get the same problem. can it be fixed?
When on 7.0 it goes to erasing for just a second and then shows the lg logo and then the animation but the lg animation keeps crashing and restarting the phone.
I tried both 30A and 30B variants no result.
Click to expand...
Click to collapse
Did you try to backup everything, then factory reset then update ?
Envoyé de mon LG-H990 en utilisant Tapatalk
oliwek said:
Did you try to backup everything, then factory reset then update ?
Click to expand...
Click to collapse
Not yet the phone however had nothing installed on it besides the apps that come with it, why would that work? (before i go and lose a whole lot of time again).
TrueFawkes said:
Not yet the phone however had nothing installed on it besides the apps that come with it, why would that work? (before i go and lose a whole lot of time again).
Click to expand...
Click to collapse
hard reset it, when update to 7.0 with the phone off press and keep holding volume down (dont release it) and then hit power and when phone vibrate release power and when LG logo came on press and keep pressing power...after that a window will pop out, use volume keys to navigate up and down and power to confirm, select yes that two windows that will appear and you done.
this is a hard reset.
sun_is_shinning said:
hard reset it, when update to 7.0 with the phone off press and keep holding volume down (dont release it) and then hit power and when phone vibrate release power and when LG logo came on press and keep pressing power...after that a window will pop out, use volume keys to navigate up and down and power to confirm, select yes that two windows that will appear and you done.
this is a hard reset.
Click to expand...
Click to collapse
Thank you,
I hard reset it before the upgrade to 7.0 and after installing 7.0 but the problem still persists, it still crashes at the LG animation.
One thing i also notice is that in LGUP the version stays at H961N20T, instead of the 30A that should be installed.
TrueFawkes said:
Thank you,
I hard reset it before the upgrade to 7.0 and after installing 7.0 but the problem still persists, it still crashes at the LG animation.
One thing i also notice is that in LGUP the version stays at H961N20T, instead of the 30A that should be installed.
Click to expand...
Click to collapse
did you download the right KDZ to flash in LGUP?
user UPPERCUT tool instead of LGUP, it solve most of the problems, works the same way as LGUP.
download this firmware: https://lg-firmwares.com/download-file/?fileId=9897
search in google for "uppercut xda" in google and you find it easy here..download and flash the firmware above and i think you are solved.
sun_is_shinning said:
did you download the right KDZ to flash in LGUP?
user UPPERCUT tool instead of LGUP, it solve most of the problems, works the same way as LGUP.
download this firmware: https://lg-firmwares.com/download-file/?fileId=9897
search in google for "uppercut xda" in google and you find it easy here..download and flash the firmware above and i think you are solved.
Click to expand...
Click to collapse
I already use uppercut.
and i also used that firmware but i'll try again
sun_is_shinning said:
did you download the right KDZ to flash in LGUP?
user UPPERCUT tool instead of LGUP, it solve most of the problems, works the same way as LGUP.
download this firmware: https://lg-firmwares.com/download-file/?fileId=9897
search in google for "uppercut xda" in google and you find it easy here..download and flash the firmware above and i think you are solved.
Click to expand...
Click to collapse
It still crashes at the animation.
It seems like this phone is allergic to anrdoid 7.0.
The thing that i find strange is that in uppercut the version number of the phone stays on H961N20T even after upgrading.
TrueFawkes said:
It still crashes at the animation.
It seems like this phone is allergic to anrdoid 7.0.
The thing that i find strange is that in uppercut the version number of the phone stays on H961N20T even after upgrading.
Click to expand...
Click to collapse
try to flash 6.0 and then do a factory reset after flash the 6.0, dont set anything in the phone leave it untouched...turn off the phone after that, with the finger in volume down hold it and connect the phone to the usb on PC, they go into download mode and flash the 7.0.
again when flash it do another factory reset, see if this solve the problem...if not you may have some problem with mainboard of the phone.
sun_is_shinning said:
try to flash 6.0 and then do a factory reset after flash the 6.0, dont set anything in the phone leave it untouched...turn off the phone after that, with the finger in volume down hold it and connect the phone to the usb on PC, they go into download mode and flash the 7.0.
again when flash it do another factory reset, see if this solve the problem...if not you may have some problem with mainboard of the phone.
Click to expand...
Click to collapse
I already did this, multiple times now.
It won't work and i think it has something to do that also causes the problem of the version number not updating in uppercut.