Hi
I have xperia neo v 11wxx
- performed unlock with test point (paid service) - all went ok
- flashed new soft with CWM - all went ok - flashed kernel in zip ICS_Spacious_Smooth_Light_ODEX_v2
After flashing phone stays at SE logo nothing happens
I Can't enter fastboot and flashboot mode
in fastboot the diode flashes blue for a sec and nothing happens
in flashboot (flashtool or companion or suse or manul) nothing happens
The phone is not detected properly (in flashtool i have to select my model manual) in companion it say "null"
In flashtool after manual selection it says that the phone flash is emty (no files in /system folders etc) no root ........
In s1tool after identify it gives some usb device error and missing file.
Iv also tried 3 diffrent computers (win8 - with driver signing off, 1x xp laptop , 1x win 7 laptop)
Tried diffrent drivers and diffrent cables
It look like kernel problem. Did you flash a kernel from zip package rom?
When you will want enter to fastboot mode turn off you device and put menu button and now connect phone to PC.
----------------------
Sorry for my bad English
tgrobi said:
It look like kernel problem. Did you flash a kernel from zip package rom?
When you will want enter to fastboot mode turn off you device and put menu button and now connect phone to PC.
----------------------
Sorry for my bad English
Click to expand...
Click to collapse
Yes iv flashed kernel from zip
I cannot enter fastboot (like i said blue led diode flashes and notthing happens)
The problem with fastboot started right after unlocking with testpoint.
Can you write what Rom you flashed?
tgrobi said:
Can you write what Rom you flashed?
Click to expand...
Click to collapse
ICS_Spacious_Smooth_Light_ODEX_v2
abaddon6661 said:
ICS_Spacious_Smooth_Light_ODEX_v2
Click to expand...
Click to collapse
It's good.
It seems like drivers problem.
But when you enter to fastboot mode the led blue flashes every time or fleshes on the moment and off.
If blue led off it's mean drivers problem for me.
I dont understand...if you cant enter fastboot mode,so you cant flash any kernel.My question,how you flash kernel from the zip actually?
flashes on the moment and off
iv tried many drivers nothing works
iv flashed zip in CWM
abaddon6661 said:
flashes on the moment and off
iv tried many drivers nothing works
Click to expand...
Click to collapse
Try to do hard reset. Remove the battery for 15 minutes.
Or try connect your phone to the mains without the battery for 15 minutes.
I see...actually you are not flash kernel,because kernel cant flashed through CWM.kernel ONLY can be flash through PC...
Sent from my MT11i using xda app-developers app
Your phone is not bricked. Had you unlocked your bootloader? New kernel can only be installed with unlocked bootloader in fastboot mode.
Open PC companion and select update phone, then remove battery, wait for 30 seconds, reinstall battery and connect phone to PC while pressing the back button, now follow instructions on PC. If this does not work you will need 'Sony_Ericsson_Update_Engine' which is no longer available on Sony website. If your bootloader is unlocked then you can install the stock kernel through fastboot mode and then flash stock ICS ROM through flashtool.
tgrobi said:
Try to do hard reset. Remove the battery for 15 minutes.
Or try connect your phone to the mains without the battery for 15 minutes.
Click to expand...
Click to collapse
Iv removed battery for 24h - no effect
Connecting without batter - no effect
mustang2011 said:
Your phone is not bricked. Had you unlocked your bootloader? New kernel can only be installed with unlocked bootloader in fastboot mode.
Open PC companion and select update phone, then remove battery, wait for 30 seconds, reinstall battery and connect phone to PC while pressing the back button, now follow instructions on PC. If this does not work you will need 'Sony_Ericsson_Update_Engine' which is no longer available on Sony website. If your bootloader is unlocked then you can install the stock kernel through fastboot mode and then flash stock ICS ROM through flashtool.
Click to expand...
Click to collapse
i have unlocked bootloader (test point - paid for this)
Pc companion detecting phone as "null"
Pressing back button - no effect. Phone not entering fastboot or flashmod mode
abaddon6661 said:
i have unlocked bootloader (test point - paid for this)
Pc companion detecting phone as "null"
Pressing back button - no effect. Phone not entering fastboot or flashmod mode
Click to expand...
Click to collapse
When you connect phone to mains does battery is charging?
Maybe microUSB port is damaged.
abaddon6661 has right, your phone isn't bricked.
----------------------------------
Sorry for my bad english
tgrobi said:
When you connect phone to mains does battery is charging?
Maybe microUSB port is damaged.
abaddon6661 has right, your phone isn't bricked.
----------------------------------
Sorry for my bad english
Click to expand...
Click to collapse
Battery is charging.
The problem is that i cannot reflash or enter fastboot.........
abaddon6661 said:
Battery is charging.
The problem is that i cannot reflash or enter fastboot.........
Click to expand...
Click to collapse
Can you enter CWM?
no
abaddon6661 said:
no
Click to expand...
Click to collapse
SUS (not SUSE) not detect phone too? In SUS is repair options.Your phone isn't brick SUS should repair it.
I spoke with a guy who had a similar problem. PC not detect phone and hi can't enter to fastboot mode. His phone has problem to battery. System kept that battery is low (0%). Exchange battery helped.
--------------------------------
Sorry for my bad english
I THINK I CAN FIX MY PHONE BECAUSE I ONLY HAVE A BOOT LOOP BY CHANGING BUILD.PROP MY PHONE IS ROOTED BUT I DON'T HAVE CLOCK WORK MOD INSTALLED ON MY PHONE SO I TRY TO WIPE FACTORY RESET USING STOCK RECOVERY BUT ITS NOT WORKING SO I TRY TO DOWNLOAD THE FIRMWARE OF MY PHONE SO THE BUILD.PROP WILL RESET TO NORMAL ONE NOW WHEN I'M USING THE SP TOOL I GOT A BIG PROBLEM I PLUG MY PHONE TO MY PC WITH OUT BATTERY AND NOT HOLDING VOLUME UP BUTTON AND IT CONNECT AND DISCONNECTS ALL THE TIME AND WHEN I UNPLUG IT AND TRY TO CLICK DOWNLOAD ON SP TOOL AND THEN PLUG MY PHONE THE SP TOOL DETECT MY PHONE THE RED LINE APPEAR AND BUT THE THING IS IT ALWAYS CONNECT AND DISCONNECTS I DON'T KNOW HOW TO FIX IT I TRY TO PUT IT ON THE OTHER USB SLOTS ON MY PC BUT STILL THE SAME I CHANGE MY USB CABLE BUT THE SAME AGAIN ANY IDEA HOW TO FIX THIS PROBLEM? I REALLY NEED YOUR ANSWER I NEED FAST ANSWER BECAUSE MY MOM WILL HATE ME IF SHE KNOWS THAT MY PHONE BRICKED!:crying:
Deadly123 said:
I THINK I CAN FIX MY PHONE BECAUSE I ONLY HAVE A BOOT LOOP BY CHANGING BUILD.PROP MY PHONE IS ROOTED BUT I DON'T HAVE CLOCK WORK MOD INSTALLED ON MY PHONE SO I TRY TO WIPE FACTORY RESET USING STOCK RECOVERY BUT ITS NOT WORKING SO I TRY TO DOWNLOAD THE FIRMWARE OF MY PHONE SO THE BUILD.PROP WILL RESET TO NORMAL ONE NOW WHEN I'M USING THE SP TOOL I GOT A BIG PROBLEM I PLUG MY PHONE TO MY PC WITH OUT BATTERY AND NOT HOLDING VOLUME UP BUTTON AND IT CONNECT AND DISCONNECTS ALL THE TIME AND WHEN I UNPLUG IT AND TRY TO CLICK DOWNLOAD ON SP TOOL AND THEN PLUG MY PHONE THE SP TOOL DETECT MY PHONE THE RED LINE APPEAR AND BUT THE THING IS IT ALWAYS CONNECT AND DISCONNECTS I DON'T KNOW HOW TO FIX IT I TRY TO PUT IT ON THE OTHER USB SLOTS ON MY PC BUT STILL THE SAME I CHANGE MY USB CABLE BUT THE SAME AGAIN ANY IDEA HOW TO FIX THIS PROBLEM? I REALLY NEED YOUR ANSWER I NEED FAST ANSWER BECAUSE MY MOM WILL HATE ME IF SHE KNOWS THAT MY PHONE BRICKED!:crying:
Click to expand...
Click to collapse
OK, first:
Please do not type in caps lock. This post is extremely difficult to read.
Second:
Never alter build prop without a custom recovery and a backup of stock.
Third:
You will most likely need to flash your factory ROM to fix this.
Hello
Every thing was good until I decided to port a ROM for my phone
I ported it with kitchen then flashed it via SP Flash Tools. The process completed without any error. After that I tried to turn on my phone but it didnt, and my phone was completely dead and now nothing is working(The screen is black,device doesnt charge,recovery doesnt come up and even dosent conect to PC) .
I tried this trick but it didnt work too
http://forum.xda-developers.com/showthread.php?t=1943442
Because PC can not recognize the phone and when I conect the cable to the computer nothing happens. I tried differnet keys but none of them worked
The port Rom was canvas A1 4.4.4 with an odd preloader and my phone is a chinces phone with mt6582 chip (GFIVE President Classic 9).
Is there any other way to revive this phone?
thanks
Ok first you wanna download your stock rom from needrom.com...then flash it with sp tools..if this doesnt work cause sp tools isnt regognising your phone,take out your phones battery and connect it pressing the vol down button(in case it is always disconnecting itself)..ok now, open sp flash tool,take the scatter file from the rom you just downloaded and extracted...press download,connect your phone without battery and you are done!!
Godlike12 said:
Ok first you wanna download your stock rom from needrom.com...then flash it with sp tools..if this doesnt work cause sp tools isnt regognising your phone,take out your phones battery and connect it pressing the vol down button(in case it is always disconnecting itself)..ok now, open sp flash tool,take the scatter file from the rom you just downloaded and extracted...press download,connect your phone without battery and you are done!!
Click to expand...
Click to collapse
As I said it doesnt work...
The PC can not recognize the phone therefore flashing is impossible...
What can I do?
Phone will not switch on or charge up.
djc1232 said:
Phone will not switch on or charge up.
Click to expand...
Click to collapse
is it detected by sp flash tools? if yes reflash stock rom, if still doesnt work, what did you made for it to brick? it might be a dead battery, use usb in pc and leave it there, it charges slower which sometimes work to recharge batteries that went fully to 0%
If nothing helps, contact your seller for a warranty claim.
Jesus, these threads nowadays...
You have to download the latest stock rom, connect your phone to sp flash tool and flash. If sp flash tool does not recognize your smartphone, you have to check that you have downloaded the correct driver for sp flash tool. After that, select Format & Download, then start formating & flashing and press the louder key until sp flash tool shows a reaction.
Im sorry for my bad english
Hi more one time...
Unfortunately I made a big mistake because while I was flashing rom, I ended up removing my cell from the USB cable, now my cell phone is not recognized by the SP Tool not flash, and I just can not flash anything else ...
Is there anything that can be done, or is my cell phone dead?
(My PC reconize when I plug the phone P9000 on USB, but flash tool doesn't)
Disconnect the battery by removing the back case and then connect​ it and then flash original rom
haidar123 said:
Disconnect the battery by removing the back case and then connect​ it and then flash original rom
Click to expand...
Click to collapse
Thank you so muchhhh!!!!
It's done :good::good::good::good::good: