Hey Guys!
I have a problem with HKphone HD New:
1 - I rooted success and use flash tool to flash reccovery but failed (hope to install Cyanogen 11 or any rom 4.4 cook ).
2 - It lost Sim sign, no service( I try many sim others but no result). And can not get in default recovery of system to restore or wipe data factory.
3 - I used flash tool to flash recovery, this time is success. But when I power on, it not work.
4 - I was tried many times but imposible.
Hope everybody help me.
HKphone HD New Info:
Hardware: MTK6589 4core
Android OS: 4.2.1
Ram: 1G
4'7 inch
2600 mA
* If you can, show me the way to install CWM recovery 6xxx, and Cyanogen 11 or any rom cook ))
THANK YOU SO MUCH.
AuValentino said:
Hey Guys!
I have a problem with HKphone HD New:
1 - I rooted success and use flash tool to flash reccovery but failed (hope to install Cyanogen 11 or any rom 4.4 cook ).
2 - It lost Sim sign, no service( I try many sim others but no result). And can not get in default recovery of system to restore or wipe data factory.
3 - I used flash tool to flash recovery, this time is success. But when I power on, it not work.
4 - I was tried many times but imposible.
Hope everybody help me.
HKphone HD New Info:
Hardware: MTK6589 4core
Android OS: 4.2.1
Ram: 1G
4'7 inch
2600 mA
* If you can, show me the way to install CWM recovery 6xxx, and Cyanogen 11 or any rom cook ))
THANK YOU SO MUCH.
Click to expand...
Click to collapse
could u write in english itll help next time
but dont matter because dagos1 will save the day lol
ok so try and do a factory reset then i want you to do all the steps from the beginning but do them slowly adn pay attention cause i think you made a mistake before
i have a htc one x but its the same way all phones work .....:laugh::cyclops::fingers-crossed::good:
I go to this:
http://forum.xda-developers.com/showthread.php?t=2370987
Flash tool: SP_Flash_Tool_v3.1252.1.104
I took this part from link above to do for my phone
ROM with ALL the files needed to flash with SPFT
________________________________________
Instructions for put CWM v6.0.2.8 with SPFT (SP_Flash_Tool_exe_v3.1316.0.150.zip):
******** Remember: I am not responsible for your actions. ********
No need to ROOT! But you must have experience with SP Flash Tool (SPFT).
For more details to put "recovery.img" using SPFT you see Flashing only part of the ROM: [TUT]MTK Android (Sp flash tool ) tutorial
Basic instructions:
** All necessary files (scatter and recoveryCWM) are in CWM BLU Life Play L100i - by lopestom.zip. Also have all the drivers installed correctly.
1. In SPFT select only option "RECOVERY". Press in word "RECOVERY" and choose recoveryCWM [recovery.img] in folder [CWM BLU Life Play L100i - by lopestom];
2. With your device WITHOUT BATTERY - press in SPFT the option "DOWNLOAD" and select "yes";
3. Connect USB in your device WITHOUT BATTERY;
4. The process start;
5. You know this make sucess when appears a green circle.
Using SPFT to flash all files or whatever it is needed:
Conditions for using the file BLU Life Play - SPFT: The device must have ALL the specifications as BLU Life Play!
I make a prayer so that you do not need these files.
If you need flash files, make sure it will do. Generally you only need to "revive" your device using only the selection "ANDROID (system)".
*** I have left two files scatter.tx. The preferred is that without the file selection "preloader" [MT6589_Android_scatter_emmc NO PRELOADER.txt]. Thus, you will be safer not to get brick as Master rua1 indicated here.
Quote:
Never needlessly Download preloader and DSP_BL blocks! It is always dangerous! On some models of phones (for example Alcatel) you will have a brick even if you download these blocks read from phone which you own! Always remove from them marks in SPFT!
**** However, if you very really need, much more needed, then you should use the other scatter.txt [MT6589_Android_scatter_emmc WITH PRELOADER.txt] that I put with on the folder.
Create a folder with name BLU Life Play - SPFT in your PC and copy all files zipped. After extract this you see:
Code:
boot.img
cache.img
EBR1
EBR2
LK
logo.bin
MBR
MT6589_Android_scatter_emmc NO PRELOADER.txt
MT6589_Android_scatter_emmc WITH PRELOADER.txt
preloader.bin
recovery.img
system.img
userdata.img
Download required files for SPFT: ----------------------->>>>>>>>> password: BLP
Part 1 (143MB) -- BLU Life Play - SPFT.part1.rar ---- Part 2 (143MB) -- BLU Life Play - SPFT.part2.rar ---- Part 3 (45MB) -- BLU Life Play - SPFT.part3.rar
So at this point you should not thank me. Make a thank you to all the real developers who make the correct software to save our device and also those who build ROMs, applications and software to create CWM.
Make a donation ($) for them. I already made my donation.
Thanks and credits for this to happen: Master Russian Shifu Michfood, Master Shifu rua1, Master Shifu bgcngm, Master yuweng and falcaobr.
--------------------------------------------------------
Good luck and have a nice day.............................
I visited : http://www.needrom.com/
And try 3 days but not done with many flash tool & rom ver
error: "l ERROR S FT ENABLE DRAM ERROR (4032)".
Hello guys, it's nice to be part of this great community. My English are not that good so please be patient with my explanations.
Well , I'm quite desperate here. A friend of mine gave me this phone (Xiaomi Redmi 1) bricked.
First of all the mobile can't boot, it says tool dl image fail. Even worst I can't even select the options in the boot menu, the tool dl image fail appears again. That means the memory is almost empty...
According to my experience the solution was only 1, Flash tools.
But again , I tried the Firmware/Update option of these ROMs: Xiaomi Hongmi WCDMA (HM2013023_images_JHBCNAL5.0_4.2)/ TD (Hongmi_images_HBJ2.02_4.2) - unbrick 5.0 and....NOTHING!
If I choose the download option but the bar reaches only 1% and theen I have this : s_ft_download_fail (4008). I tried the HM2013023_images_JHBCNAH4.0_4.2 but with the same results.
An extra detail is that IF I choose the format option, althought it doesn't complete...my mobile doesn't open after that. In order to be working again, I just have to choose the download option (till the 1%) and the it boots with the above problems.
To be more clear I installed the necessary drivers, I removed them, I installed them again...NOTHING. I changed the USB port, the same results..
An interesting quotation is that if I try to connect the device with a different USB cable that the original, the pc doesn't even recognize it (mobile). Also, I've noticed that the flash tools cannot install these (from the scatter) : Android, Cache, UserData & Fat.
As for the CMW Recovery ... no luck at all. They are all in image format which means, I can not install it.
Any help will be appreciated....althought I'm pretty sure the phone is 99% dead..
Any news?
Scattyyy said:
Hello guys, it's nice to be part of this great community. My English are not that good so please be patient with my explanations.
Well , I'm quite desperate here. A friend of mine gave me this phone (Xiaomi Redmi 1) bricked.
First of all the mobile can't boot, it says tool dl image fail. Even worst I can't even select the options in the boot menu, the tool dl image fail appears again. That means the memory is almost empty...
According to my experience the solution was only 1, Flash tools.
But again , I tried the Firmware/Update option of these ROMs: Xiaomi Hongmi WCDMA (HM2013023_images_JHBCNAL5.0_4.2)/ TD (Hongmi_images_HBJ2.02_4.2) - unbrick 5.0 and....NOTHING!
If I choose the download option but the bar reaches only 1% and theen I have this : s_ft_download_fail (4008). I tried the HM2013023_images_JHBCNAH4.0_4.2 but with the same results.
An extra detail is that IF I choose the format option, althought it doesn't complete...my mobile doesn't open after that. In order to be working again, I just have to choose the download option (till the 1%) and the it boots with the above problems.
To be more clear I installed the necessary drivers, I removed them, I installed them again...NOTHING. I changed the USB port, the same results..
An interesting quotation is that if I try to connect the device with a different USB cable that the original, the pc doesn't even recognize it (mobile). Also, I've noticed that the flash tools cannot install these (from the scatter) : Android, Cache, UserData & Fat.
As for the CMW Recovery ... no luck at all. They are all in image format which means, I can not install it.
Any help will be appreciated....althought I'm pretty sure the phone is 99% dead..
Click to expand...
Click to collapse
any news??
I have the phone (hongmi) bricked too....
when I try to use SP Flash tool after choose the correct rom, i try to fix the firmware and after done 100%(red bar) an error comes out (4032)....
My phone sometimes start (but goes in black screen quickly) often NO.... do you have any information for me? Or some other forum that can I check)
Tnx in advance
Hi, i've bricked my phone...someone knows how to unbrick.?
luisfernandoo.nunezfranco said:
Hi, i've bricked my phone...someone knows how to unbrick.?
Click to expand...
Click to collapse
Without any further details, it's going to be difficult to help. It's pretty hard to do so..... What did you do to brick it? Can you get into recovery. Do you have a custom rom? Provide some more details & someone might be able to help you
mightymaki said:
Without any further details, it's going to be difficult to help. It's pretty hard to do so..... What did you do to brick it? Can you get into recovery. Do you have a custom rom? Provide some more details & someone might be able to help you
Click to expand...
Click to collapse
>Hi Friend, i would appreciate yor help, my Nubua Z7 max is bricked after flashing the new(from needrom site) 5.0 stock rom and reflashing the original kitkat stock rom.
I need to repartition the phone storage , when i boot it appears only 4.0 Gbyte storage for programs , but no internal storage.
How can i repartition the internal storage?
Thank you
Simonis said:
>Hi Friend, i would appreciate yor help, my Nubua Z7 max is bricked after flashing the new(from needrom site) 5.0 stock rom and reflashing the original kitkat stock rom.
I need to repartition the phone storage , when i boot it appears only 4.0 Gbyte storage for programs , but no internal storage.
How can i repartition the internal storage?
Thank you
Click to expand...
Click to collapse
There are some instructions on the Z7 mini thread here on XDA. Have a search & follow the instructions
Unbrick Z7 max
mightymaki said:
There are some instructions on the Z7 mini thread here on XDA. Have a search & follow the instructions
Click to expand...
Click to collapse
Thank you but i did not find anything relevant by searching
[email protected] said:
Thank you but i did not find anything relevant by searching
Click to expand...
Click to collapse
You can follow this thread: http://www.androidiani.com/forum/zte-nubia-z7/446548-guida-di-unbrick-z7-max-mini.html
use google translate.
I am going to post a guide in English in about 2 hours. I have bricked mine and I followed the procedure from androidiani.
Guide to unbrick ZTE Nubia Z7 Mini
I have done this procedure on my device without any problem after a repartition failure, but I am not responsible about anything happens to your device (which is already bricked...)
The source is http://www.androidiani.com/forum/zte-nubia-z7/446548-guida-di-unbrick-z7-max-mini-27.html
1) We disable driver signature verification for windows.
- Windows XP https://mega.co.nz/#!30I1yLRD!kLblCqP9_LmiOXjpfzGbFL7m2zqAqKqZ8ciPFWMBDB0
- Windows 7 http://www.sabrent.com/support/knowledgebase.php?article=14
- Windows 8 http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
2) We download the drivers, which we extract in our desktop.
3) We connect the device while switched off to PC via a USB 2.0 port, and we launch Windows device manager. We press simultaneously Vol +/Vol -/Power button for ~5 seconds. We should see our device identified as QHUSB_BULK under Ports section in device manager. If we get prompted to format several drives we cancel all of the actions.
4) We right-click at device QHUSB_BULK > Update Driver > Browse my computer for driver software > Let me pick from a list of device drivers on my computer > Have disk > Browse, and we open Nuova cartella folder which we have extracted, containing the drivers.
We choose the driver named Qualcomm HS-USB QDloader 9008 and we install it.
We can see our device now identified with that name in the device manager.
5) We download Nubia Toolstudio , and Z7 mini files.
We extract them inside a folder in our desktop, and we run toolstudio as administrators, disabling our anti-virus, or putting the program to its' exceptions because it will be detected as malware.
In the prompt which will pop-up requiring a password, we enter the e-mail address found at the .txt file.
6) We select eMMC Download, we refresh and we should see our device identified like this.
7) We select browse, and we select the folder nx507J_files containing the Z7 mini files.
8) We select start all, and we wait until the procedure finishes.
The whole process has ended, we unplug our device and we can boot it. We will be with stock rom 1.28
Hi Stratos,
i was able bevor to google translate the italian text an d using the screenshots avaliable there i was able to flash the Nubia 7 MAX
software. BUT no imeis are in the Phone so now i have to find a method to type the IMEI numbers in the Phone dont know how..
I tried to create a flashable zip (as suggested by nano7mobile.blogspot) but did not work maybe becuase i dont know
the IMEI Folder location inside the Phone..
Simos
previously after bricked zte z7 max, can flash with ToolStudio : http://www.needrom.com/download/z7-max-2-13-android-5-beta_eng_chi/ (file: NX505J_CNCommon_V2.13.tar)
voila, phone revive.. thankyou..
Another Problem is Appear..
Imei,Meid, is gone.
i backup imei (blank) with Qpst, generate name: blank_imei.QCN ( ^^)
edit my own file : blank_imei..QCN (with blank imei,meid,esn)
the file is about 141 KB.
i open with hexa editor, feel confuse, don't know where to start, don't know the location of imei,meid,esn.
i don't know where "offset" position to be edit.
i google around,
i think need file : *.QCN from someone z7 max backup, to determine the position of imei,meid,esn. (cmiiw)
can someone help me, provide backup of Z7 Max *.QCN file?
i will Surely change it with hexa editor, edit it with my own imei,meid,esn.
or there is another way to fix this imei-meid-esn problem?
please help...
best regard's
stratos_21 said:
I have done this procedure on my device without any problem after a repartition failure, but I am not responsible about anything happens to your device (which is already bricked...)
The source is http://www.androidiani.com/forum/zte-nubia-z7/446548-guida-di-unbrick-z7-max-mini-27.html
1) We disable driver signature verification for windows.
- Windows XP https://mega.co.nz/#!30I1yLRD!kLblCqP9_LmiOXjpfzGbFL7m2zqAqKqZ8ciPFWMBDB0
- Windows 7 http://www.sabrent.com/support/knowledgebase.php?article=14
- Windows 8 http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
2) We download the drivers, which we extract in our desktop.
3) We connect the device while switched off to PC via a USB 2.0 port, and we launch Windows device manager. We press simultaneously Vol +/Vol -/Power button for ~5 seconds. We should see our device identified as QHUSB_BULK under Ports section in device manager. If we get prompted to format several drives we cancel all of the actions.
4) We right-click at device QHUSB_BULK > Update Driver > Browse my computer for driver software > Let me pick from a list of device drivers on my computer > Have disk > Browse, and we open Nuova cartella folder which we have extracted, containing the drivers.
We choose the driver named Qualcomm HS-USB QDloader 9008 and we install it.
We can see our device now identified with that name in the device manager.
5) We download Nubia Toolstudio , and Z7 mini files.
We extract them inside a folder in our desktop, and we run toolstudio as administrators, disabling our anti-virus, or putting the program to its' exceptions because it will be detected as malware.
In the prompt which will pop-up requiring a password, we enter the e-mail address found at the .txt file.
6) We select eMMC Download, we refresh and we should see our device identified like this.
7) We select browse, and we select the folder nx507J_files containing the Z7 mini files.
8) We select start all, and we wait until the procedure finishes.
The whole process has ended, we unplug our device and we can boot it. We will be with stock rom 1.28
Click to expand...
Click to collapse
I bricked it yesterday trying to downgrade from cm12.1 to Official nubia 3.01. Yesterday it showed up as QHUSB_BULK, but now it shows up as android cd rom drive and I can't do anything with it. Currently it will boot into the nubia recovery and it will charge, I can't enable it as mass storage device . I can see that all my files are there through the recovery but I can't gain access to them. Will it let me flash from External USB micro sd card as I am about to go buy one? If I turn it on it goes straight into nubia recovery and when I have it off it charges.
When you said 1.28 did you mean Official 1.82? The 1.82 did not work for me as I had an official 1.82 already downloaded. The file you linked I could not download due to poor connection. I was able to install Nubia 3.01 but I think I lost my imei because it says no sim detected. Fortunately, I do have an efs backup from HC-kTool - will I be able to restore that? Also all of this began as I went straight to V3.01 instead of V2.03, first . And then I went to cm12.1 which was extremely buggy so I try to downgrade to official v3.01 and then to Kitkat 4.4.4 v1.82 when something happened to the pc and phone lost connection during the downgrade.
What should I do next? I currently am on Lollipop 3.01 with no radios, baseband etc. My blue-tooth and wi-fi are working. Should I try to restore my efs.img I backed up with HC-kTool?
next4nextel said:
I bricked it yesterday trying to downgrade from cm12.1 to Official nubia 3.01. Yesterday it showed up as QHUSB_BULK, but now it shows up as android cd rom drive and I can't do anything with it. Currently it will boot into the nubia recovery and it will charge, I can't enable it as mass storage device . I can see that all my files are there through the recovery but I can't gain access to them. Will it let me flash from External USB micro sd card as I am about to go buy one? If I turn it on it goes straight into nubia recovery and when I have it oharges.
Click to expand...
Click to collapse
I'm in a similar situation with mine, self inflicted of course while I was trying to get the phone rooted with 3.01.
Anyway where it is now I can still boot to a point and I still have the Nubia recovery util fully functional. If you go into that and look under 'other' you will see that you have the ability to enable mass storage from there and yes you have the option of updating via SD,internal and OTG via the recovery util.
For me though unless I want to get nasty and do things from scratch it looks like I can only carry out an update using an official Nubia file and not just a recovery nor an earlier or current version of stock firmware which is kind of weird. And yes you have the option of updating via the SD,internal and OTG via the recovery util.
Thanks Parso, fortunately I followed the above steps and I restored to official 5.0. but then I lost my imei and had to sort that out. I actually like the official 5.0 except for 2 bugs one where I can't see the WiFi icon on the status bar unless I'm connected to Wi-Fi. And the other is sometimes when I get a call the screen never lights up and I can't swipe to answer the calls which is really annoying because I have to call them back.
I have the same situation right now.I upgraded my z7max 1.64 to 3.09.then I tried cm12 but there were so many problems with mobile data.
So I decided to change it.It was a big mistake to go back to 1.64 without reading anything.In the end it stopped working after a few trys.
Anyway I managed to enter toolstudio 4.6 and show it at por as com13 .Then I watched steps and flashed 3.09 to phone.It seemed like succesfull but it wasnt.Now it s not reacting and all black screen.
Also when I connected it to computer again at the beginning it was QHUSB_BULK with yellow sign.Then I tried to install Qualcomm CDMA Technologies MSM to set it up.Now it became worse.When I connect my phone it s written "unidentifed device" on device manager.
I guess we re missing one thing.For example this "Qualcomm CDMA Technologies MSM" or qhsusb驱动 folders are for XP, Vista or 7. I m using windows 8 right now and I think these files are not suitible as drivers.
So my phone is dead now.If I can set drivers up I guess I can fix it.But I cant find any other drivers and that s the biggest problem.
Hi everyone,
My feedback, After try CM12.1 i decided to return at android 4.4 and for that i used nubia updated tools and nubia studio.
After flash, no imei and only USA Band.
After restored my NV backup 1 IMEI of 2 come back ?!, After restore my
NV Value (values from opo guide, because NV Calculator give me a bad number ?) all band done USA, ENRO, JAPAN etc ...
BUT the phone lock/unlock (after enter my lock pin) every 5 secondes ?
Please help me, i have no ideas
buzz-27 said:
Hi everyone,
My feedback, After try CM12.1 i decided to return at android 4.4 and for that i used nubia updated tools and nubia studio.
After flash, no imei and only USA Band.
After restored my NV backup 1 IMEI of 2 come back ?!, After restore my
NV Value (values from opo guide, because NV Calculator give me a bad number ?) all band done USA, ENRO, JAPAN etc ...
BUT the phone lock/unlock (after enter my lock pin) every 5 secondes ?
Please help me, i have no ideas
Click to expand...
Click to collapse
For all those who are facing issues unbricking the phone as given above, use these Qualcomm drivers (5th post from top)
http://forum.cyanogenmod.org/topic/71825-hard-brick-to-hell-and-back-guide-to-recovery/page__st__40
Point to these drivers from Device manager (QHUSB_BULK). Your device should be identified correctly. Also follow the same steps exactly as given earlier. I managed to unbrick with completely working phone & IMEI.
If anyone is intersted in reading why Qualcomm devices cannot be bricked completely, read the links given below in 2 parts
http://www.androidbrick.com/ultimate-qualcomm-snapdragon-unbrick-guide-snapdragons-are-unbrickable/
http://www.androidbrick.com/unbrick...oader-9008-if-you-have-the-right-kind-of-rom/
next4nextel said:
Thanks Parso, fortunately I followed the above steps and I restored to official 5.0. but then I lost my imei and had to sort that out. I actually like the official 5.0 except for 2 bugs one where I can't see the WiFi icon on the status bar unless I'm connected to Wi-Fi. And the other is sometimes when I get a call the screen never lights up and I can't swipe to answer the calls which is really annoying because I have to call them back.
Click to expand...
Click to collapse
Hello,
COuld you please tell me how you solved the problem, cause all imei and meid are:null
Please someone help me fix the imei problem, i have my imei nr's on the box, but i did not do a back-up.
Thank you
zte z7 mini
hi bad rom update and can not get back into recovey have looked at the posts but drivers link down and when i get Nubia Toolstudio i downloade 3 times put needs password ??? any help please i am runing on windows 10 64bit and win 7 32 bit if some can help on here or mail me on [email protected] going mad with this
Hi, this is my first post here. XDA-forums are great and I think here is the place where you would help me to solve the problem with my phone Nubia z7max.
The problem is that after a software (ROM) update in recovery TWRP from the stock 3.22 to Mokee (android 6 ) , the phone remained on logo "Nubia powered by Android". I have read probably everything written about that problem in all possible places that I found around the internet including Chinese NUBIA forum, Androidiani, 4PdA and so on. I followed all the steps which incidentally are the same everywhere for fixing the phone:
http://forum.xda-developers.com/zte-z7/general/unbrick-nubia-z7-mini-t3006268/page2
stratos_21 said:
I have done this procedure on my device without any problem after a repartition failure,
but I am not responsible about anything happens to your device (which is already
bricked...)
The source is http://www.androidiani.com/forum/zte-nubia-z7/446548-guida-di-unbrick-z7-max-mini-27.html
1) We disable driver signature verification for windows.
2) We download the drivers, which we extract in our desktop.
3) We connect the device while switched off to PC via a USB 2.0 port, and we launch Windows device manager. We press simultaneously Vol +/Vol -/Power button for ~5 seconds. We should see our device identified as QHUSB_BULK under Ports section in device manager. If we get prompted to format several drives we cancel all of the actions.
4) We right-click at device QHUSB_BULK > Update Driver > Browse my computer for driver software > Let me pick from a list of device drivers on my computer > Have disk > Browse, and we open Nuova cartella folder which we have extracted, containing the drivers.
We choose the driver named Qualcomm HS-USB QDloader 9008 and we install it.
We can see our device now identified with that name in the device manager.
5) We download Z7 mini files.
We extract them inside a folder in our desktop, and we run toolstudio as administrators, disabling our anti-virus, or putting the program to its' exceptions because it will be detected as malware.
In the prompt which will pop-up requiring a password, we enter the e-mail address found at the .txt file.
6) We select eMMC Download, we refresh and we should see our device identified like this.
7) We select browse, and we select the folder nx507J_files containing the Z7 mini files.
8) We select start all, and we wait until the procedure finishes.
The whole process has ended, we unplug our device and we can boot it. We will be with stock rom 1.28
Click to expand...
Click to collapse
The difference in my case is that the procedure for flashing have completed with no errors and the phone restarts and it is in the same condition without any change: the logo "NUBIA powered by Android".
I tried to maybe over 10 different drivers. The phone is detected by the computer as it should be. When downloading the ROM in to the phone with ToolStudio_4.6 or NX505J Nubia Tool V2.1.0, procedure runs without any problems but the result is the same. There is no possibility to enter into recovery, I was TWRP and accordingly have a backup made in TWRP ahead of time when my phone is working normally.
With the combination Vol+, Vol- & Power pressed together for about 7-8 seconds the phone is recognized by the computer as HSUSB_Bulk and a cuple of disc drives with a different volume. Drivers are installed correctly although hardware is 19d2 and the phone is recognized as Qualcomm HS-USB QDLoader 9008 (COM XX).
With the combination Vol+ & Power pressed together for about 7-8 seconds the phone is recognized as Android ADB Interface, on screen are Nubia logo. In this kind I can charge (at least visibly) TWRP through "Z7_Max_All_In_One_Tool_Created_By_Tigreos" (NeedRom), but after that I can not go into Recovery. With the same tool I can install stock recovery too but still can not login to recovery.
The biggest success I've achieved after many attempts, two weeks from now, are to initial animation pictures and melody at startup and phone suddenly goes off.
Pleace Help
Hi,
When i am trying install custom ROM using TWRP in my redmi 2 prime phone ,it got strucked it between the process. So my phone got bricked.
So i tried to install via Mi flash tool with stable ROM of MIUI .But unfortunately there are many disk drives opened with the request to format drive when i am connecting my phone with Mi flash tool for the first time.
By mistake i have formatted one disk drive (which had 512 kb size) and it is successfully done
After formatting only i got to its something importent which is need not to be touched. Because my phone is totally dead after this format.
But now i can able to connect my phone using USB cable and the phone is detectable by computer in MI flash tool. But I am unable to flash the phone with stable ROM as the tool showing the error of "hello packet can not be reached". After the error msg the flashing has stopped .
Is there any experienced developers to help me to solve this issue and bring back my phone
Searching for your answers?
VenKat
Use fastboot method to install fastboot rom
Taskavenkat said:
Hi,
When i am trying install custom ROM using TWRP in my redmi 2 prime phone ,it got strucked it between the process. So my phone got bricked.
So i tried to install via Mi flash tool with stable ROM of MIUI .But unfortunately there are many disk drives opened with the request to format drive when i am connecting my phone with Mi flash tool for the first time.
By mistake i have formatted one disk drive (which had 512 kb size) and it is successfully done
After formatting only i got to its something importent which is need not to be touched. Because my phone is totally dead after this format.
But now i can able to connect my phone using USB cable and the phone is detectable by computer in MI flash tool. But I am unable to flash the phone with stable ROM as the tool showing the error of "hello packet can not be reached". After the error msg the flashing has stopped .
Is there any experienced developers to help me to solve this issue and bring back my phone
Searching for your answers?
VenKat
Click to expand...
Click to collapse
Do you know how to work with SP Flash Tools? It's what I would recommend.
kiko9895 said:
Do you know how to work with SP Flash Tools? It's what I would recommend.
Click to expand...
Click to collapse
Hi ,
Thanks for your reply.
SP flash tool only for MediaTek Devices. But Redmi 2 prime is Qualcomm device.So i am unable to use the SP flash tool.
Can you suggest me any other idea?
Hi
try fastboot method to restore recovery and other stuffs......
Perhaps you might want to go to a Redmi 2 forum? This is a Redmi Note 2 forum (i.e., different device).
DarthJabba9 said:
Perhaps you might want to go to a Redmi 2 forum? This is a Redmi Note 2 forum (i.e., different device).
Click to expand...
Click to collapse
oh sorry... i will check this on Redmi 2 prime forum.
Thanks.