Hello, i have problem with Samsung Galaxy S6 Edge / G925 (Poland, Play) and i can't write modem and bootloader because i see error Re-Partition Operation Failed.
On this moment mobile power on, but baseband and imei is unknown.
In bootloader i see correct version as G925F, on menu is that same but on download mode i see G925W8.
Serial number from backplate isn't that same as in mobile menu.
I can restore mobile via SmartSwitch as version G825W8 but when i try power on i see DRK error.
Whe i try restore mobile via SmartSwith as 925F i see error as pc don't see phone.
I can flash radio from 925W8 version without errors, whet i try flash radio from 925F i see Re-Partition Operation Failed
I can flash via odin AP and CSC as G925F, but when i try flash BL or CS i see Re-Partition Operation Failed.
Phone is rooted via CF Auto Root, when i start Partition Backup i see two yellow position (EFS and Radio).
Thank's for all ideas.
Related
Hi guys, i have just bought a Samsung Galaxy S3 LTE i9305 it was advertised as unlocked and it is to a point but wont get a signal with my Three sim card. i have tried vodafone and EE sims and they work fine. i've re-entered the settings for Three in mobile networks settings but still nothing, just says emergency calls only. can anyone help?
rumbo76 said:
Hi guys, i have just bought a Samsung Galaxy S3 LTE i9305 it was advertised as unlocked and it is to a point but wont get a signal with my Three sim card. i have tried vodafone and EE sims and they work fine. i've re-entered the settings for Three in mobile networks settings but still nothing, just says emergency calls only. can anyone help?
Click to expand...
Click to collapse
You may need to flash a Three modem
Read this: [REF] Galaxy S3 Modem / Radio Collection (I9300 & I9300T ONLY) CWM & Odin Flashable
To flash a new modem:
1. Download an official rom from http://www.sammobile.com/firmwares/ and extract the zip to md5 then extract the md5
2. In Odin, select “CP”(previously “Phone”) and fetch the modem.bin file
3. Only thing checked should be “Auto Reboot”
4. Put the phone in download mode, plug in USB, then in Odin hit Start
I decided to flash a fresh room on my Galaxy S5 SM-G900F, that has a Android 5.0 on it... to a fresh version from SAMMOBILE - [G900FXXU1BOJ1_G900FLUX1BOJ1_LUX] ...
Before doing that I decided to backup my phone with the Helium application... I started the backup... but I don't know where the backup files went... because the backup sudennly stopped... I decided no not repeat the operation, and started flashing my phone...
Downloaded Odin, restarted the phone in Download mode... put the ROM in the AP, start... After a wile obtained a red **FAIL** in the upper left rectangle, and on the phone screen console the following:
ODIN MODE
product name: SM-G900F
CURRENT BINARY: Samsung Official
System Status: Official
REACTIVATIO LOCK (KK): OFF
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD: ENABLE
**
VOC START
Volume Size is too big 20480 < 61440
ODIN : Invalid ext4 image
Invalid percent of drawing download progress bar!
Unsupport dev_type
**
What to do now? Can I restart the phone?
Phone details
SM-G900F
Released:2014 r.
Built-in memory: 32 GB
Memory card: MicroSD
RAM Memory:2 GB
OS: Android 4.4 > Android 5.0
CPU type: Qualcomm MSM8974AC
CPU freq.: 2500.0 MHz (4-core)
Where can I find a PIT file for my SM-G900F 32GB ?
Maybe it was my backup that occupied the remaining space on the phone and now is not enought free space?
serge559 said:
I decided to flash a fresh room on my Galaxy S5 SM-G900F, that has a Android 5.0 on it... to a fresh version from SAMMOBILE - [G900FXXU1BOJ1_G900FLUX1BOJ1_LUX] ...
Downloaded Odin, restarted the phone in Download mode... put the ROM in the AP, start... After a wile obtained a red **FAIL** in the upper left rectangle, and on the phone screen console the following:
ODIN MODE
product name: SM-G900F
CURRENT BINARY: Samsung Official
System Status: Official
REACTIVATIO LOCK (KK): OFF
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD: ENABLE
**
VOC START
Volume Size is too big 20480 < 61440
ODIN : Invalid ext4 image
Invalid percent of drawing download progress bar!
Unsupport dev_type
**
What to do now? Can I restart the phone?
Phone details
SM-G900F
Released:2014 r.
Built-in memory: 32 GB
Memory card: MicroSD
RAM Memory:2 GB
OS: Android 4.4 > Android 5.0
CPU type: Qualcomm MSM8974AC
CPU freq.: 2500.0 MHz (4-core)
Where can I find a PIT file for my SM-G900F 32GB ?
Click to expand...
Click to collapse
does your csc match the one from the odin.tar update you downloaded
toolhas4degrees said:
does your csc match the one from the odin.tar update you downloaded
Click to expand...
Click to collapse
Sorry, I am new here, I don't know the /what is CSC
serge559 said:
Sorry, I am new here, I don't know the /what is CSC
Click to expand...
Click to collapse
if you have a us phone you need to flash a us(cellular south) firmware canada/canada firmare etc etc. if your phone csc and firmware dont match the odin tar won't parse. just guessing.
toolhas4degrees said:
if you have a us phone you need to flash a us(cellular south) firmware canada/canada firmare etc etc. if your phone csc and firmware dont match the odin tar won't parse. just guessing.
Click to expand...
Click to collapse
I don't have a US phone, but a France (SFR) one... I don't know how to identify the CDC, I tried to flash with the following ROM
sammobile.com[/]firmwares[/]download[/]59259[/]G900FXXU1BOJ1_G900FLUX1BOJ1_LUX
serge559 said:
I don't have a US phone, but a France (SFR) one... I don't know how to identify the CDC, I tried to flash with the following ROM
sammobile.com[/]firmwares[/]download[/]59259[/]G900FXXU1BOJ1_G900FLUX1BOJ1_LUX
Click to expand...
Click to collapse
that is german
try this one
http://www.sammobile.com/firmwares/download/60063/G900FXXU1BOJ1_G900FSFR1BOJ1_SFR/
toolhas4degrees said:
that is german; try this one sammobile.com/firmwares/download/60063/G900FXXU1BOJ1_G900FSFR1BOJ1_SFR
Click to expand...
Click to collapse
Is from LUXembourg... I will try the SFR one you provided...thanks.... but I tried already a lot of ROMs... without success... if that ROM will does not load, could I find somewhere a partition PIT file for my 32GB phone?
serge559 said:
Is from LUXembourg... I will try the SFR one you provided...thanks.... but I tried already a lot of ROMs... without success... if that ROM will does not load, could I find somewhere a partition PIT file for my 32GB phone?
Click to expand...
Click to collapse
but your phone csc is sfr. so you need a sfr firmware
good luck. that's all I got
toolhas4degrees said:
but your phone csc is sfr. so you need a sfr firmware
Click to expand...
Click to collapse
I flashed multiple time my phone... is first time I have a fail, but I never user a SFR ROM to flash my phone, I always use France or other European countries, operator fee roms in order do not include operators additional unuseful layers. Thank you for your help!
If you not to Pro about this just use samsung kies 3
serge559 said:
I flashed multiple time my phone... is first time I have a fail, but I never user a SFR ROM to flash my phone, I always use France or other European countries, operator fee roms in order do not include operators additional unuseful layers. Thank you for your help!
Click to expand...
Click to collapse
DIDn't work:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BOJ1_G900FSFR1BOJ1_G900FXXU1BOJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Can't open the serial(COM) port.
make sure your driver for your device is working
when i use odin. i open odin then boot to download mode. then connect device to pcvia usb, (make sure you get a green com light up in the left corner of odin) select ap. select tar then flash
You can easily restart the phone with remove the battery and restart the phone or holding (power down, volume up and home) until phone restart u r still on original software with ur warrant nothing deleted from ur phone and if its not worked go to samsung u r still didn't lose ur warranty
I rebooted several times the phone in the download mode, and after multiple tries, the ROM linked by @toolhas4degrees http://www.sammobile.com/firmwares/download/60063/G900FXXU1BOJ1_G900FSFR1BOJ1_SFR/ was succesfully loaded... but was not from the first try loading this ROM...
Greetings,
I am using SM-G532F/DS bought from Saudi Arabia. Android version 6.0.1. When it was first opened it was region locked but I requested an unlock code from Samsung and they sent me and successfully unlocked it's region lock. I previously tried rooting it with odin but failed and now I get the message " An error has occured while updating the device software... use smart switch pc app " every time I turn it on, but smart switch doesn't accept my s/n. Now my last option left is flashing the stock firmware using odin. But I can't turn on my device to see/check software info ( pda, csc etc. ). My question is, can i flash any firmware disregarding pda and csc? Because I don't know if there is any way to find out software details. If pda and csc is important, how can I find out the correct firmware if the only thing I can use is download mode. I can't turn on the phone anymore.
Device info:
Model: SM-G532F/DS
Android version: 6.0.1
hi my s6 edge SM-G925F has no poerating system i got it in january this year like this and have been trying ever since to fix it it is on o2 i have tryed sammobiles version of the firmware but odin fails on sboot.bin can any one help me
also when i factory reset the phone it says E: failed to mount /preload (invalid argument)
If you know the s/n just go to device initialization in smart switch put the model number and serial number and it will restore your phone
Hello everyone,
I need help with resurrecting the above phone model. After updating it via Samsung Switch, it 'magically' stopped receiving network recognition but it could sense the SIM card's network operator. I tried dialing some numbers and it said "Not registered on the network". I ran to the internet through various forums. I have been re-flashing STOCK ROM and i was getting PASS; still no good came out. I tried custom ROMs, same thing. NOW suddenly i got an efs/ failed to mount. How can i resurrect my baby? All i have about the phone is:
AP: G925FXXU6EVG4 (Build number) - NDR90M
CP: G925FXXU6ERF5 (Baseband version)
CSC: G925FXXU6EVG4 (Country version) - 02U
IMEI SV - 02
SN - RF8G610C1MN
The stock ROMs i have downloaded so far are:
1. Samfw.com_SM-G925F_O2U_G925FXXU6EVG4_fac.zip (stock ROM based on the last successful booting ROM; after updating via Samsung Switch)
2. Samfw.com_SM-G925F_O2U_G925FXXU6ERG1.zip
I have these in place:
- Samsung S6 Series EFS Backup Restore Tool v1.0 By Jamesjerss.exe (which i used prior; to get an efs.img before my phone got messed up (a 20Mb file was created). Is that the backed up EFS?
- Odin Odin3_v3.14.4
- CF-Auto-Root-zerolte-zeroltexx-smg925f.zip
- twrp-3.3.1-0-zerolte.img.tar and twrp-3.3.1-0-zerolte.img (i wonder the difference although the internet says i use .tar with Odin)
- SR5-SuperSU-v2.82-SR5-20171001224502.zip
Now, the stock ROM stops on the RECOVERY MODE with efs/ failed to mount, and when i try the custom ROM, it stops on SAMSUNG Galaxy S6 Edge. In all recovery modes, good enough my PC detects my phone's internal storage. I need to get this device to work, people.
Someone help with with a step by step tutorial, please. I am a fast learner
PS Am not a tech student or anything, am just a person who reads stuff on the internet although i understand some basic stuff on tech
splk said:
Hello everyone,
I need help with resurrecting the above phone model. After updating it via Samsung Switch, it 'magically' stopped receiving network recognition but it could sense the SIM card's network operator. I tried dialing some numbers and it said "Not registered on the network". I ran to the internet through various forums. I have been re-flashing STOCK ROM and i was getting PASS; still no good came out. (...)
Click to expand...
Click to collapse
1. If you think about Smart Switch Mobile, it is not for update.
2. Go back to Stock firmware via odin.
2. Have you seen >this< tutorial?
how can i know the stock firmware of the phone....i only remember the one that was updated via Smart Switch (Hanset: Samsung Galaxy S6 Edge G925F single SIM card slot no SD card slot)
1. Check your CSC on the phone box or with the Phone INFO app ★SAM★ 3.8.5.
2. Select your CSC region in the "Version" box read the instructions and download the firmware.
3. Use Odin 3.13.1 to update this model.
@ze7zez. Just bought it from some phone shop that sells used phones. I have the needed STOCK firmware already. The CSC is 02U G925F---VG4. All am getting is this image below:
Since your system is not working, go to "View recovery logs" and look for CSC or "region name".
You can also try uploading firmware from your country's region.
The CSC is 02U (O2) which according to internet research it is UK
Download SM-G925F / Galaxy S6 Edge SM-G925F O2U in Samfw - Samsung firmware download
SM-G925F / Galaxy S6 Edge SM-G925F O2U samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
ze7zez said:
Download SM-G925F / Galaxy S6 Edge SM-G925F O2U in Samfw - Samsung firmware download
SM-G925F / Galaxy S6 Edge SM-G925F O2U samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
Click to expand...
Click to collapse
@ze7zez thats where i got the firmwares from
SM-G925F O2U G925FXXU6EVG4
click
Download on Browser
or
Dowload SamFw server
ze7zez said:
SM-G925F O2U G925FXXU6EVG4
click
Download on Browser
or
Dowload SamFw server
Click to expand...
Click to collapse
I already have all firmwares for this handset from 02U. I have tried EVERY STOCK ROM...but all am getting is E: Failed to mount '/efs' (Invalid argument).
I tried EFS-Fix-regalstreak.tar.md5 basing on https://ajketech.wordpress.com/2016/07/27/efs-missing-factory-mode-activated-here-is-the-solution/ i got FAIL.
I do have an efs.img i made before all of this whole saga but i don't know if it is broken or okay.
Try flashing TWRP from >this< manual. Read it carefully!
With TWRP you will have more options for repair.
ze7zez said:
1. If you think about Smart Switch Mobile, it is not for update.
2. Go back to Stock firmware via odin.
2. Have you seen >this< tutorial?
Click to expand...
Click to collapse
i have tried and failed....up to 3. COuldn't proceed to 4. Thanks though
https://forum.xda-developers.com/t/guide-how-to-fix-efs-damaged-on-samsung-devices-easy.3850032/ try this