Hello, I tried resetting my note 5, and now it's on a logo loop? It keeps displaying Samsung logo then black screen, then logo. No idea what is happening.
So I thought I could try reinstalling the firmware, or something. However, I went over to the Samwares website but i could not find my device. Can anyone help me out?
My device is Samsung Galaxy Note 5 (AT&T) [SM-N920A]
If anyone can show me the ropes on getting the firmware, and programs to use that'd be great.
Update: So, I looked around and this is what Ima try and do.
I'm going to use ODIN and use the package firmware "N920AUCS4CQB2" which is the latest version before 7.0.
I have the full package apparently, that comes with 4 files or whatnot.
However, my question is now. Can I update my firmware to the latest while being on 5.1.1? Last I noticed, I was on 5.1.1.
=
I've already tried re-doing the wipe, and cache. But still not working. :/
Related
Have an AT&T Galaxy Note II.
It was rooted and there were some strange problems happening with the phone from time to time so I decided to go ahead and unroot it.
As I have done before, I decided to restore the Galaxy Note II to its original firmware.
I got the AT&T SGH-I317 firmware from Sammobile.
Loaded Odin in Windows. Loaded the downloaded TAR file.
Upon hitting start the recovery would go about halfway then suddenly FAIL.
Tried it on a different computer. Same thing.
Now I cannot boot my phone. When I do, it goes into a firmware error mode and suggests KIES recovery.
KIES cannot even see my phone at this point.
Anyone have any suggestions? I am in the process of redownloading the firmware file, but I am guessing that is not the problem.
Thanks
I AM HERE FOR ANSWERS NOT JUDGEMENT​
So i have a Samsung Galaxy S2 Titanium from Virgin Mobile (SPH-D710CMUB)​
Before I get into the problem let me just tell you what happened.
1. Rooted my phone no problems at all.
2. Installed Chainfire 3D. Extremely Stupidly I didnt read the description. its doesnt work on JB 4.1.2. and guess what... I installed it and ran it.
3. Went into boot loop
4. got it out of bootloop. I dont know how. But new problem is it got stuck at Firmware upgrade encountered an Issue...
5. doesnt work in kies so i use odin.
6. i am pretty new to android and the updates and stuff still but i downloaded a Samsung Galaxy s2 (international) version of 4.1.2 jb
7. It failed many times but i got it to work and it may have glitched my phone (*or something* and now the model number is GT-I9100 instead of SPH-D710CMUB
Question 1 Is it possible to change the model number in the way described above?
Question 2. If it is possible. is there a way to change it back?
If you can answer those questions for now that would be very helpful. I do have more if someone is willing to help.
Hi,
After trying to get TWRP working on my Galaxy S3 i9305T (Australian Telstra Model), I think I have bricked the device.
I manually flashed TWRP recovery from this http teamw.in/project/twrp2/146, but turns out it's international, not the Australian one, which I unfortunately only realised later. Since then, my phone has looped the loading splash screen and the recovery screen. I've reinstalled CWM v6.0.2.9 Touch successfully on it, but I can't install any roms, because the phone doesn't seem to be identifying properly.
Under another recovery software/thing, it was saying that the ROMs I had (i9305 from the official CM website) were for m3, something, something, i9305, and that mine was an 'm0.' Would anyone be able to push me in the right direction to get my phone working again? Any help GREATLY appreciated.
Cheers
Ah, I managed to fix it by flashing the stock rom over it, took a short while to find.
Edit: It was from sammobile, in case anyone comes across this thread trying to fix the same problem.
So... I followed this guide (https://forum.xda-developers.com/galaxy-tab-s4/how-to/guide-rooting-wifi-version-galaxy-tab-t3841763) and it bricked my Tab S4 version T830XXU3BSF3 (Wifi). I get to the Samsung screen with a custom powered by logo and Set Warranty Bit : Kernal at the top but it wont load any further. I downloaded the latest firmware from sammobile and attempted to flash from Odin. Odin reports all threads completed, but still unable to get past the Samsung screen. Also attempted cache clear and factory reset, nothing worked, can anyone give me some info on how I might be able to resolve this? Or do I just have a fancy paper weight now? Thanks.
(I'm fairly new to this whole process so if I have dump follow up questions, I apologize in advance)
I was able to figure out how to fix it, thanks to anyone that viewed this thread with intents to help.
I have an old Galaxy 10.1 note 8020. I loaded Lieneage OS 14 with Gappa's 7.1 pico. It became like a new tablet and everything has worked fine for months. Would so update Gapps to the latest, has done this many times. This time on reboot, it locked itself in the black screen with the Samsung text. I am trying to get back into TWRP but I only see its text for a short moment and then again on black screen with Samsung start text. I can connect with ODIN but only get errors when I try to reinstall TWRP.
How do I solve this? :crying:
See attached image of ODIN.
Is this a dead forum?
Really disappointed!
Hello !!