So... I followed this guide (https://forum.xda-developers.com/galaxy-tab-s4/how-to/guide-rooting-wifi-version-galaxy-tab-t3841763) and it bricked my Tab S4 version T830XXU3BSF3 (Wifi). I get to the Samsung screen with a custom powered by logo and Set Warranty Bit : Kernal at the top but it wont load any further. I downloaded the latest firmware from sammobile and attempted to flash from Odin. Odin reports all threads completed, but still unable to get past the Samsung screen. Also attempted cache clear and factory reset, nothing worked, can anyone give me some info on how I might be able to resolve this? Or do I just have a fancy paper weight now? Thanks.
(I'm fairly new to this whole process so if I have dump follow up questions, I apologize in advance)
I was able to figure out how to fix it, thanks to anyone that viewed this thread with intents to help.
Related
Ok guys I'm super new to this and have been searching all day. I got a Nexus S with Videotron here in Canada. It is the I9020T I made the mistake of trying to root it which brought me to the google logo loop.
I then panicked and followed the unrooting process to fix the phone: http://forum.xda-developers.com/showthread.php?t=1088494
When I ran Odin with the package supplied the Radio failed.
The phone will now boot up, however, the signal bar is grey'd out with an x which I'm assuming is because I have no radio.
I should also mention my phone is 3g and the odin package is 4g which I'm assuming is one of the reasons it did not work.
I would just like to know what to do to bring the whole thing back to stock. I have tried the bootloader recovery but it just gives me the android guy with a triangle and an exclamation point inside.
I have also tried factory reset and another odin package which just hangs.
Could someone please tell me exactly what to do as this is a work phone, and I'm in a lot of trouble if I can't fix it.
I beg you please help before work tomorrow!!
Thanks guys,
Chris
EDIT: Sorry guys, just saw the master thread. Will repost this there. x
Hi guys,
Apologies if there's a thread about this already.
I just upgraded my firmware through the settings menu on my Galaxy S2 - everything seemed to go OK, phone rebooted, now it's stuck on the SAMSUNG GALAXY SII GT-I9100 logo on a black screen indefinitely.
Tried so far:
Removing battery for a period of time, then rebooting
Booting into recovery mode and emptying the cache (have not tried factory reset yet)
Allowed to boot for 30 minutes to see if anything would happen, nothing
Can you guys offer any advice before I consider more extreme measures? I've kind of accepted I'm going to have to format the stupid thing now. Should I do a factory reset before trying to flash the firmware using Odin? I'm about to try this:
http://forum.xda-developers.com/showthread.php?t=1457458
To try to fix what I assume is a soft brick issue. Does this seem like a good idea?
Sorry if I sound like a complete n00b. I don't normally get this involved with my phone, but it's kind of forced my hand this time around
Many thanks x
no worring yet
do factory data reset
if that fails flash a stock rom using odin. search intratech thread in orignal development
Hi,
After trying to get TWRP working on my Galaxy S3 i9305T (Australian Telstra Model), I think I have bricked the device.
I manually flashed TWRP recovery from this http teamw.in/project/twrp2/146, but turns out it's international, not the Australian one, which I unfortunately only realised later. Since then, my phone has looped the loading splash screen and the recovery screen. I've reinstalled CWM v6.0.2.9 Touch successfully on it, but I can't install any roms, because the phone doesn't seem to be identifying properly.
Under another recovery software/thing, it was saying that the ROMs I had (i9305 from the official CM website) were for m3, something, something, i9305, and that mine was an 'm0.' Would anyone be able to push me in the right direction to get my phone working again? Any help GREATLY appreciated.
Cheers
Ah, I managed to fix it by flashing the stock rom over it, took a short while to find.
Edit: It was from sammobile, in case anyone comes across this thread trying to fix the same problem.
Can anyone help me? Pleaaaaase
I'am desperate to fix my tab :crying:
First time here, im a newbie :laugh:
I have a samsung tab 2 7" (p3100), 3g wifi, its os is if im not mistaken, 4.0.4
I have been searching online about how to root my tab and I bumped upon a certain thread.
I followed their instructions and flashed CWM to my tab via odin, and when my tab rebooted, it was on a bootloop.The Samsung Tab 2 7.0 will appear then the sound will play then it reboots again and again and again.....
I tried to access recovery mode by waiting for the right timing during the boot loop, the cwm was successfully installed, and when I tried to flash the zip, it was finished, then I rebooted the system but Im still having boot loops, please help me,
Should I go to some technicians in malls?
Im searching the net for almost 8 days for the solution :crying: :crying: thank you in advanced for the answers.. I somehow also cant find a 4.0.4 stock rom, people from other forums said that i just need to revert to the stock rom?
Hello, I tried resetting my note 5, and now it's on a logo loop? It keeps displaying Samsung logo then black screen, then logo. No idea what is happening.
So I thought I could try reinstalling the firmware, or something. However, I went over to the Samwares website but i could not find my device. Can anyone help me out?
My device is Samsung Galaxy Note 5 (AT&T) [SM-N920A]
If anyone can show me the ropes on getting the firmware, and programs to use that'd be great.
Update: So, I looked around and this is what Ima try and do.
I'm going to use ODIN and use the package firmware "N920AUCS4CQB2" which is the latest version before 7.0.
I have the full package apparently, that comes with 4 files or whatnot.
However, my question is now. Can I update my firmware to the latest while being on 5.1.1? Last I noticed, I was on 5.1.1.
=
I've already tried re-doing the wipe, and cache. But still not working. :/