My redmi 3s screen was broken and I managed to replace it, altough I found the repair very difficult. The new screen works but the touch calibration is a little off. The bottom part of the screen registers touches about 0,5 cm lower, this makes typing difficult. The upper part seems to be ok so I am typing this with the phone upside down... Is there are way to manualy calibration the touch screen? I already tried the touchscreen calibration app but didn't help, maybe because the app registers touches in the upper part of the screen...
Hello nightraver.
Did you find a solution for that ? I also changed my screen and I have the same problem.
Thanks.
Related
Hi,
My phone seems to register double touch input while i am only using one finger
It only happens only when i pass the my finger over the middle of the screen, ie. a horizontal line in the middle of the screen. This is affecting scrolling and tapping on anything in the middle of the screen.
I just want to know if this a software (calibration) issue or a problem with the screen itself.
see attached a screenshot of multi-touch test using 'Display Tester'.
thanks.
Did you test this with other touch-tester software also?
Like these:
https://play.google.com/store/apps/details?id=org.hermit.touchtest
https://play.google.com/store/apps/details?id=com.batterypoweredgames.mtvistest
https://play.google.com/store/apps/details?id=com.the511plus.MultiTouchTester
nihil0 said:
Did you test this with other touch-tester software also?
Click to expand...
Click to collapse
I did, they all show the same problem.
It seems any touch in the 'Y' range between 145 and 190 will register as two touches. I have attached another screenshot. I tried a calibration tool for Nook tablet, but nothing improved.
As title said, I am looking for any app or hack that can turn of/ ignore the part of touch screen. My HOX hac broken digitizer and some times part of digitizer is working even when i'm not touching screen ( it's really annoying), So is there any option to turn off the part of touchscreen?
I've changed screen on my Flyer. Repair parts were from working tablet with dead battery controller. So I simply replace donor's mainboard with mine. Now I've got this kind of problem: middle part of screen (where upper row of letters is situated in portrait mode) handles my touch like multitouch of near area. For example, I press Backspace, and screen shows touch of Backspace and 0. Other parts of screen works fine. I've made calibration reset, hard reset but nothing gone. Please help me to find solution. Any help would be appreciated
Hi, recently I started facing touch screen issues.
My touch sensitive buttons aren't responding and sometimes the lower part of the touch screen is unresponsive. That is fixed with a gentle squeeze and a lock and unlock. Sometimes the touch behaves as if I'm using two fingers than one (scaling when trying to fast forward video using one finger )
Sometimes the entire touch screen goes unresponsive which is fixed with a lock and unlock. The scroll becomes dead slow too sometimes. Again the fix is the same.
I'm not sure if this is a firmware issue or hardware issue. The rest of the touch works fine.
I'm using a Gionee P6
I tried to trouble shoot using the secret star codes but unfortunately the menu is in Chinese for this device.
If someone could help before I send it in for repair which will take a long time I'd appreciate it
EDIT : I Was able to use the touch screen testing from the diagnosis hardware menu and there are no dead points. Every part of the touch screen responds. Except when I actually use them in Android
Good day, I have a problem with the phone of Jinga Basco m500, Sometimes the upper part of the screen is pressed spontaneously.
Is it possible to somehow disable the part of the screen that I need. What would the screen not react to the touch in this part ? How to do it ? with the help of which programs ?