I tried to update firmware for my Star n9500 (mtk6589) - in my firmware ringer/speaker didnt worked !!!
i used SP flash tool, and windows disconected in the middle of the proces.
Phone was dead after that, now im getting error BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) - [EMI] Enable DRAM Failed!
So no way to upload old or new firmware always same problem. I tested 3 computer + 3 different USB cables, always same error, 2 different firmwares (from needrom.com)
Windows detect phone as MTK USB port or some times (i still dont know how exactly) i get also detected as DA USB VCOM PORT (in drivers details i have id VID_OE8B&PID_2001) - but also in this mod SPflash tool (im using verson v3.1304.0.119) do not start to trnsfer data. (here programming dont start - so i dont get error)
Any idea how to fix the phone?
palicaj said:
I tried to update firmware for my Star n9500 (mtk6589) - in my firmware ringer/speaker didnt worked !!!
i used SP flash tool, and windows disconected in the middle of the proces.
Phone was dead after that, now im getting error BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) - [EMI] Enable DRAM Failed!
So no way to upload old or new firmware always same problem. I tested 3 computer + 3 different USB cables, always same error, 2 different firmwares (from needrom.com)
Windows detect phone as MTK USB port or some times (i still dont know how exactly) i get also detected as DA USB VCOM PORT (in drivers details i have id VID_OE8B&PID_2001) - but also in this mod SPflash tool (im using verson v3.1304.0.119) do not start to trnsfer data. (here programming dont start - so i dont get error)
Any idea how to fix the phone?
Click to expand...
Click to collapse
Same problem here!
Steve-Austin said:
Same problem here!
Click to expand...
Click to collapse
Also problems with speaker / ringer???
palicaj said:
Also problems with speaker / ringer???
Click to expand...
Click to collapse
Nope, just the BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
Make sure ALL files in the checklist on the side are present - Got similar errors when flashing rom without preloader to a different device.
There might be some clues to pick up here: http://forum.xda-developers.com/showthread.php?t=1943442
... I'd want to start with making sure you're flashing a rom that you're certain is made for your device - and make 100% sure Preloader is included!
pr0xZen said:
Make sure ALL files in the checklist on the side are present - Got similar errors when flashing rom without preloader to a different device.
There might be some clues to pick up here: http://forum.xda-developers.com/showthread.php?t=1943442
... I'd want to start with making sure you're flashing a rom that you're certain is made for your device - and make 100% sure Preloader is included!
Click to expand...
Click to collapse
I solved my problem.
As a last chance i tried to flash my N9500 with wrong firmware from Star S5.
And miracle - phone was flashed without problems , no errors.
After that was non functional, but this allowed me to flash original n9500 firmware, and phone was functional
Rom
palicaj said:
I tried to update firmware for my Star n9500 (mtk6589) - in my firmware ringer/speaker didnt worked !!!
i used SP flash tool, and windows disconected in the middle of the proces.
Phone was dead after that, now im getting error BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) - [EMI] Enable DRAM Failed!
So no way to upload old or new firmware always same problem. I tested 3 computer + 3 different USB cables, always same error, 2 different firmwares (from needrom.com)
Windows detect phone as MTK USB port or some times (i still dont know how exactly) i get also detected as DA USB VCOM PORT (in drivers details i have id VID_OE8B&PID_2001) - but also in this mod SPflash tool (im using verson v3.1304.0.119) do not start to trnsfer data. (here programming dont start - so i dont get error)
Any idea how to fix the phone?
Click to expand...
Click to collapse
Hi ther just follow this steps:
Root
Alps N9500 rom April 19 2013
Fix GPS
After the update fix the camera with SP MDT and GPS with M44 toolbox.
Did this myself and what a great phone this is...
is bricked
rom stock no request driver display and camera update 10/05/21013
https: //hotfile.com/ dl/ 207896579/ 2cb4abe/ STAR_N9500.rar. html
open flashtool and scatter rom folder
click download
cable and battery insert
push on device
power and vol down
start flash stop power and vol down
I hope it works method
ok in my mtk 6577 9300 rom
no bricked normal procedure flashtool
sorry my bad english
S4 Clone ?
Hi! My phone is Star N9500. And when I want update it to 4.2.2, it bricked.
Erorr is:
BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
Please help me!
NEXT UPDATE ROM STAR N9500 V1 E V2 STOCK
Hardware : MT6589
Model : Star N9500
Build number : freedgt_20130620
Build date UTC : 20130507-112453
Android v : 4.2.2
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V6.P4, 2013/05/04 18:26
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Fri May 10 11:08:37 CST 2013
v1 driver display LT050ANKP019A
v2 driver display 1-RX_499NT_598A
Rom Stock IN FOLDER Star N9500 STOCK 4.2.2
Recovery 3e for version LCD 1-RX_499NT_598A
RECOVERY CWM FOR VERSION LT050ANKP019A RECOVERY IN TO FOLDER Scatter From LCD CWM REPLACE IN FOLDER Star N9500 STOCK 4.2.2
for driver LCD 1-RX_499NT_598A use scatter 2 (v2)
for driver LT050ANKP019A use normal scatter
1 driver display LT050ANKP019A
v2 driver display 1-RX_499NT_598A
Rom Stock IN FOLDER Star N9500 STOCK 4.2.2
Recovery 3e for version LCD 1-RX_499NT_598A
https: //mega.co.nz / #!d5hUCTCJ!QaswYlltRIFdR_1XJSARSzmu7Aop86uEGxBCkUyXwUw
freedgt said:
NEXT UPDATE ROM STAR N9500 V1 E V2 STOCK
Hardware : MT6589
Model : Star N9500
Build number : freedgt_20130620
Build date UTC : 20130507-112453
Android v : 4.2.2
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V6.P4, 2013/05/04 18:26
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Fri May 10 11:08:37 CST 2013
v1 driver display LT050ANKP019A
v2 driver display 1-RX_499NT_598A
Rom Stock IN FOLDER Star N9500 STOCK 4.2.2
Recovery 3e for version LCD 1-RX_499NT_598A
RECOVERY CWM FOR VERSION LT050ANKP019A RECOVERY IN TO FOLDER Scatter From LCD CWM REPLACE IN FOLDER Star N9500 STOCK 4.2.2
for driver LCD 1-RX_499NT_598A use scatter 2 (v2)
for driver LT050ANKP019A use normal scatter
1 driver display LT050ANKP019A
v2 driver display 1-RX_499NT_598A
Rom Stock IN FOLDER Star N9500 STOCK 4.2.2
Recovery 3e for version LCD 1-RX_499NT_598A
https: //mega.co.nz / #!d5hUCTCJ!QaswYlltRIFdR_1XJSARSzmu7Aop86uEGxBCkUyXwUw
Click to expand...
Click to collapse
It not work.
My phone is Star N9500. And when I want update it to 4.2.2, it bricked.
Erorr is:
BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
Please help me!
look the video by youtube its solution for dram failed 4032
you search at youtube dram failed 4032 star x920e, you finded.
palicaj said:
I tried to update firmware for my Star n9500 (mtk6589) - in my firmware ringer/speaker didnt worked !!!
i used SP flash tool, and windows disconected in the middle of the proces.
Phone was dead after that, now im getting error BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) - [EMI] Enable DRAM Failed!
So no way to upload old or new firmware always same problem. I tested 3 computer + 3 different USB cables, always same error, 2 different firmwares (from needrom.com)
Windows detect phone as MTK USB port or some times (i still dont know how exactly) i get also detected as DA USB VCOM PORT (in drivers details i have id VID_OE8B&PID_2001) - but also in this mod SPflash tool (im using verson v3.1304.0.119) do not start to trnsfer data. (here programming dont start - so i dont get error)
Any idea how to fix the phone?
Click to expand...
Click to collapse
ringer/speaker didnt worked
palicaj said:
Also problems with speaker / ringer???
Click to expand...
Click to collapse
i did root with motochoper and mtk6589 drivers and now have no system sound.. i have star n9500...help me
Iocean X7 Elite Brick
I have just received my Iocean X7 Elite and was about to install a new rom. I had successfully flashed the device and then was trying to flash
the recovery with SP Flash Tool.
After the recovery flashed my phone refuses to turn on I believe its somehow bricked but have no idea how this could have happened. I did
format flash i only downloaded the recovery to the device.
In Device Manager when i plug the phone it it either shows up as 'DA USB VCOM Port' or 'MTK USB Port'.
When I try to use SP Tool to flash the stock Rom back onto the device I get an error saying 'BROM ERROR : S_FT_ENABLE_DRAM_FAIL(4032)
I have no idea what to do next can someone help me.
n9500 woos
You guys are scaring me with the problems your having with flashing/rooting/recovery installation on the n9500. I just order one off ebay for my wife whos been a good miss' using her Optimus T and hasnt complained about it, well, to much. But I am glad that some of you have found help and or fix the problems yourself. I plan on ordering one myself but it looks like i'll have to leave it stock for a time until we got our own section on the forums which i think would help with cookin the roms and receiving help when things go a muck.
for BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
edit your scatter or scatter rom
sample
CACHE 0x2d180000<---no cpy
add
__NODL_
solve result
__NODL_CACHE 0x2d180000
sample
USRDATA 0x34f80000 <----no copy
add
__NODL_
result
__NODL_USRDATA 0x34f80000
result
__NODL_USRDATA your ex code
__NODL_CACHE you ex code
exit and save file
flash no battery requised
SP Flash Tool v3.1316.0.150
https ://hotfile.com/dl/230492941/fa4f1d1/SP_Flash_Tool_v3.1316.0.150.rar.html
Jtag it
please help i have haipai i9389 i bootlooped it so i downloaded rom from needrom and flashed it but it gives me white screen how can i fix this?
My phone is this
http://www.mixeshop.com/index.php?m...bf85a41b837&categories_id=&keyword=star+n9500
It is the 8gb version
I flashed
http://www.needrom.com/mobile/star-n9500-4/comment-page-5/#comments
and phone is dead
I get BROM_ERROR: S_FT_ENABLE_DRAM_FAIL(4032)
(EMI) Enable DRAM failed
My phone is seen as MTK USB by SP flash tool
Help. Is there anyway to fix this?
Ok i really need some help from you guys here as stated in the title i have an MTK6575 phone that seems to be unrootable
the phone is a samsung galixy s3 clone from china it is made by the company ALPS and is using an s880 board with an MTK6575 chip running android version 4.3.0 version name such a ics or jb is unknown
you can find a full detailed report on the phone here : my s3 close detailes
ok so far on this phone i have tried
- superoneclick
- oneclickroot
- MTKtools
- baidu.com root tool
- CWM Recovery
- Root_with_Restore_by_Bin4ry
notes to remember is that using superoneclick it dose say the phone is all ready rooted ! but i have installed super user and it has no effect and there are no root permissions on the phone
wen using the recovery update.zip options i get the following error ( invalid OTA package ) this phone is using the stock 3E recovery
so any help anyone has would be greate because this is a friend phone and it has not become a chanllange to root it and it looking like this phone really is unrootable
ecreene the
hi,
ther is a trick
download the moborobo and start this...
if the connection is done, u can use the droidtool to root
I also used android beyond B78 and I also want to root this device, my first ever root this device uses EROOT and successful :fingers-crossed:, but with my limited knowledge and install one of the antivirus applications, android back to normal and I tried to root again using the same application but this device can not root again, I try again with KINGO, but still can not:crying:. Is there a root application compatible with this device? Thanks
Model : Beyond B78
version : 4.0.9
device product : hexing15_6626_gb2
hardware : MT6575
So...
I have tried to root my tablet what I bought from dealextreme. Geniusroot,iroot,MTK tools etc..
Now I installed MTK tool and Is it seems that I dont have quad-core..
Is there enythink that I can do to root my device?
Is there a change to install CWM to tablet?
Spec: dx.com/p/d101-hd-10-1-android-4-4-quad-core-dual-3g-tablet-pc-w-2gb-ram-16gb-rom-white-348926
Photobucket I have pictures from MTK 2.5.3 tool: ( Can't post image becouse newbie)
i1382.photobucket.com/albums/ah251/masoookk/mtk_zps847ba78b.jpg
i1382.photobucket.com/albums/ah251/masoookk/mtk2_zpse9dd1911.jpg
And I want root this tablet, you did?
I trying a many software but not work
My specs:
http://specdevice.com/showspec.php?i...f-fffff1109570
Mediathek MT6580, 8x ARM cortex A7 @2Ghz,
Device: Manufact JTY, Model N111 (KT107)
Kernel 3.10.72+
Mtk_Droid_Tool_v2.5.3 create scatter file button is greyed out
Miracle Box 2.58:
I created a scatter file by Miracle Box 2.58 and read the ROM back to HD
However MTK root attempt with Miracle Box failed.
SP_Flash_Tool_v5.1824: read back rom with scatter file from miracle box:
Mtk_Droid_Tool_v2.5.3 reported an error if I try to process file ROM_ from flash Tool.
--> I think MTK Droid tool isn't working at all for my device
However Read back Rom from Miracle box apparently worked.
How can I use these files to root my device?
see also here
https://forum.xda-developers.com/android/help/mt6592-jty-model-n111-kt107-t3946983#post79879485
hari.st said:
Mtk_Droid_Tool_v2.5.3 create scatter file button is greyed out
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=2160490 says MTK Droid tool is not compatible with MT6580 and my Android 7.1
What can I do now?