i have a tab given by a institute ALLEN tab 11
it not written any company name on tab cover or in about phone
institute has own android OS to operate tab 11
And i tried to flash android firmware G+ X9+ firmware download now(Bossrom.com)
and flashed successfully by sp flash tool but now in booting
allen ver doesnot allow to access more setting like camera , installation apk, playstore, usb debugging option
or many other that mean i can not able to use this tablike a android
AFTER FLASHING I TRIED TO FLASH AGAIN BUT IT SHOWING ERROR 4032
I HAVE BACKUP FILE IN(.backup) i cant able to use it to restore or flash
DETAILS
BB CHIP- MT6580
MS BOARD - K710
KEERNAL VER- 3.10.72 ([email protected])(GCC VERION 4.8) #1 SMB REEMPT
VERSOIN - 5.1
SW VER- K710LL-V1-FWTS8GF8GEN-QGO3-WXGANL-ALLEN TAL 11
CUSTOMMBUILT NO - ROCO 2016-08-06
MODEM VERSION - MOLY WK8-W1449.MD.MG.MD.V39
BAR CODE - 073101MT0123457176-O11302
Related
hello all , 20 days ago I purchased this phone ipro mod A3 , immediately found the problem that the data connection and the wi.fi you , empowered by yourself even if I shut them . At this point I turned to the seller explaining the problem and he sent me a link to download sp flash tool and software. At this point the phone format , format whole flash and then I install the software, so everything is ok . I turn the phone starts normally , then exit the text imei null and at this point I start to worry . I search the internet and find a solution I do root your phone with vroot and then I used mtk droid and I put the codes imei . I notice that the programs they were when you first turn there were no more ' , the data connection and the wi-fi does not enable more' alone, but only if I do. the problem now and that if I enable the data connection with the sd card in the phone shuts continuing to say inspettatativamente removed sd , sd card and then comeback continues so
phone info
model A3
Android version 4.2.2
version baseband MOLLY.WR8.W1350.MD.WG.MP.V4.P3 , 09.23.2013 11:27
version 3.4.5 kernel builder @ c1 # 1 Mon Dec 16 15:18:26 CST 2013
build number A3_I9430_IPRO_2G_MP_V1.1
custom build version 131216
gentlemen,
I reached my trial and error boarders with this problem.
My SGP521 having now formal most recent Sony build 23.4.A.1.200 Android 5.1.1 flashed with Sony Companion does not provide MAC (b4:52:7e:98:2f:0a) and IP adress to the WiFi and Bluetooth menu anymore, though no WiFi and no Bluetooth. I have flashed several older FTF builds for SGP521 down to 4.4 kitkat using flashtool 0.9.19.8 and problem still exists. I have run a factory reset, no solution. I have run the service nr
*#*#7378423#*#* and it shows me Mac Adress 1: (b4:52:7e:98:2f:0a) in 'miscTA PLUS on filesystem (b4:52:7e:98:2f:0a) is basically known in the system.
S1 Boot Version: 1277-2049 S1_Boot_MSM8974AB_LA3.0_L_37
FILE SYSTEM VERSION: GLOBAL-LTE_23.4.A.1.200
ETS Software Version: 1278-7011_6
Customization Version: 1282-2019_R3C
Active Customization: 1282-2019_R3C
Type Number
TM-0040-BV
Touch Firmware Version: 12
GFuel Guage Firmware Version: The phine doesn´t support firmware version read
Current Modem Cong:
/system/etc/customization/modem/amss_fsg_castor_tar_mbn
and in the Menu: DTCP-IP: SRM Validation (Unavailable)(Unknown Error)
have searched in many forums and couldn't find a solution yet. Is that a hardware issue? Fact is, that th WIFI and Bluetooth module does not start up and in the advcanced setting to WiFI either the MAC nor the IP adress is shown available, fields are greayed out.
Your fast and educated advices are more than appreciated.
Thank you
still sticking with WiFi / Bluetooth issue on SGP521
gentlemen,
I am still stucking with the WiFi / Bluetooth issue - not operable - even after the most recent firmware update.
Any hints? Your help & analysing is highly appreciated - I can send you the link for relevant screen dumps for your error guessing and possible solutions:
I accidentally flashed an incompatible firmware into the device.
That is : MF190_MOVISTAR_ES_EUV1.00.00
As a result of which,the Dashboard(the CD drive with drivers and all) isn't showing up, But the device is working on systems with pre-installed drivers.
Orignal firmware version: BD_RELIANCEMF190V1.0.0B01
I have the reliance firmware files and I tried to flash using QPST 2.7 build 411 ,but modem never switches to download mode.
If anyone could help me with QPST or post link for firmware installer executable or Any how get its dashboard working again, i will really appreciate it.
Problem is: I can't receive auto messages from the internet / Can't Install Android Marshmallow 6.0.1 / 2 and so on from Nougat 7.0
Hello all!
I have phone LG G5 H850 Titan / Nougat 7.0 / Provider: TIM / Provider NAME: TIM /
Network type TIM ( Italy )
When I was on firmware Marshmallow 6.0.1 everything was alright all auto messages from the internet coming successfully, after update to Nougat 7.0 my phone can't receive the auto messages from the internet and I am sure for 100% , becouse after that I tested the problem through my Samsung Galaxy S3 I9300 ( Android v. 4.3 ) and everything is work fine. As I understund there is some problems in security patch Nougat 7.0
So what I have done: ofcourse factory reset, I got bootloader, I got LG UP , I got twrp.
Through the software ( LGUP - kdz files / TWRP - zip files ) I install other firmwares ( regions ) but only Nougat 7.0 and
anyway nothing working. Becouse when I trying to install Marshmallow 6.0.1 / 2 no matter which version,
installation process working fine, from 0 to 100% , but after that firmware asking me for
some password and give me some 27 attempts. Here is the screenshots:
Can't add image becouse of rules ( Give me e-mail please and I will send ) - Asking for the password after Installing Marshmallow 6.0.1 / 2 and so on.
Can't add image becouse of rules ( Give me e-mail please and I will send ) - After installing Nougat 7.0 , restarting the phone I got that image / Translation is - encryption is done successfully, you put the right password, but I did not put anything, I just installed Nougat 7.0 after Marshmallow fail, becouse of password. So then I make factory reset and everything working fine ( Becouse there no other options after installing ). But auto messages I still did not receive. Can you Help me please? Thanks!!!
Hello to the community,
I need urgent help with my P Smart 2019 (POT-LX1). Briefly some info, have the P Smart 2019 cheap auctioned as defective with software error. The previous owner said he had tried a board software / flash file (.xml) to flash unfortunately he no longer knows which it was exactly.
After that, the P smart 2019 no longer started and it is displayed a different boot logo (Huawei Ascend) he has then started several attempts with different firmware (dload) and (.xml) all without proper success. P smart 2019 now starts again but as boot logo is still Huawei Ascend and the firmware seems to be only a board dignose firmware. In Settings --> System --> About Phone is no model ( unknown )
Device name "PAN
Build number "POT-LX1-BD 1.0.0.53
EMUI version 5.0
Android version 7.0
IMEI 00000000000000
CPU - Octa-Core 1.8Ghz
Ram - 2GB
internal storage 11GB free /16GB total (but should be 64GB)
what or which firmware / board software do I have to flash that everything is recognized correctly again and the correct boot logo is displayed?
that should be feasible... I hope. I am familiar with the process of Test Point flash only I do not see through the whole firmware and board software at Huawei more... POT-LX1 or POT-L21 then the various board flash file (.xml).
EDIT: the eRecovery language is chinese!
Would be more than grateful if someone could help me there times something. despair slowly.
please excuse my bad english.
LG and thanks
Yunyhx said:
Hello to the community,
I need urgent help with my P Smart 2019 (POT-LX1). Briefly some info, have the P Smart 2019 cheap auctioned as defective with software error. The previous owner said he had tried a board software / flash file (.xml) to flash unfortunately he no longer knows which it was exactly.
After that, the P smart 2019 no longer started and it is displayed a different boot logo (Huawei Ascend) he has then started several attempts with different firmware (dload) and (.xml) all without proper success. P smart 2019 now starts again but as boot logo is still Huawei Ascend and the firmware seems to be only a board dignose firmware. In Settings --> System --> About Phone is no model ( unknown )
Device name "PAN
Build number "POT-LX1-BD 1.0.0.53
EMUI version 5.0
Android version 7.0
IMEI 00000000000000
CPU - Octa-Core 1.8Ghz
Ram - 2GB
internal storage 11GB free /16GB total (but should be 64GB)
what or which firmware / board software do I have to flash that everything is recognized correctly again and the correct boot logo is displayed?
that should be feasible... I hope. I am familiar with the process of Test Point flash only I do not see through the whole firmware and board software at Huawei more... POT-LX1 or POT-L21 then the various board flash file (.xml).
EDIT: the eRecovery language is chinese!
Would be more than grateful if someone could help me there times something. despair slowly.
please excuse my bad english.
LG and thanks
Click to expand...
Click to collapse
Nobody any Idea?