Hy GuYs my huweai y221-u22 break while installing cynogenmod and i try to flash stock rom but pc successfully installing my phone but spflash tool not decting my phone
In my phone ias geting TWRP but in way to install custom rom TWRP tells two ressan one is 'cant mount cust pack'
and secont is error esporting update binary in zip
Guys plzz tell me a way to open my phone in any way
abdulmuhaiminkp said:
Hy GuYs my huweai y221-u22 break while installing cynogenmod and i try to flash stock rom but pc successfully installing my phone but spflash tool not decting my phone
In my phone ias geting TWRP but in way to install custom rom TWRP tells two ressan one is 'cant mount cust pack'
and secont is error esporting update binary in zip
Guys plzz tell me a way to open my phone in any way
Click to expand...
Click to collapse
Install drivers of your mobile to pc and then launch the tool
prashantp01 said:
Install drivers of your mobile to pc and then launch the tool
Click to expand...
Click to collapse
But I have install drivers and PC is decting my phone successful
Related
Hard bricked my canvas nitro.
I m dumb tried to flash a ROM at 2% battery..... everything's ded.
No recovery. No fastboot. Broken logo.bin.
Phone is detected in so flash tools... but when I flash the original firmware.. it gives me error brom_cmd_jump_da_fail... same with ygdp
.
Plx help
TSG756 said:
Hard bricked my canvas nitro.
I m dumb tried to flash....
..Plx help
Click to expand...
Click to collapse
Which ROM did you try?
Was it meant for your device?
And as far as I know if its really a hard brick you'll need JTAG for it to be recovered.
Well it wernt a ROM it was magisk . damnit pokego
Well but the I fixed it
... It was just about sp flashtools... I'll probably make a correct thread about it
Did your recovery mode working or not? If it is then download any custom rom, place it on your external sd card and flash it. If not get the stock and flash it through Sp flash tool
TSG756 said:
Well it wernt a ROM it was magisk . damnit pokego
Well but the I fixed it
... It was just about sp flashtools... I'll probably make a correct thread about it
Click to expand...
Click to collapse
Me too having the same issue and no recovery, no factory mode and either fastboot bode also not working . What do i do now ?? Any solution.. I just wanna restore it as stock one..
U will try YGDP TOOL
TSG756 said:
Well it wernt a ROM it was magisk . damnit pokego
Well but the I fixed it
... It was just about sp flashtools... I'll probably make a correct thread about it
Click to expand...
Click to collapse
How did you fix your phone? Micromax a311. My device keeps connecting and disconnecting when I connect to PC. Can you send link for drivers. I have .CBP file for the flash tool
reis1996 said:
How did you fix your phone? Micromax a311. My device keeps connecting and disconnecting when I connect to PC. Can you send link for drivers. I have .CBP file for the flash tool
Click to expand...
Click to collapse
Check this, may be it is helpful
https://forum.xda-developers.com/showpost.php?p=68672696&postcount=5
Bricked micromax canvas a 311
My phone is Bricked, I have installed adb, v com drivers yet the pc doesn't recognise the device, i tried both sp flash, ygdp but no use. I can hope fully boot into recovery mode but my phone is not rooted, I don't know how to install rom via recovery mode. Some one please tell me a solution
Jithin James said:
My phone is Bricked, I have installed adb, v com drivers yet the pc doesn't recognise the device, i tried both sp flash, ygdp but no use. I can hope fully boot into recovery mode but my phone is not rooted, I don't know how to install rom via recovery mode. Some one please tell me a solution
Click to expand...
Click to collapse
At most you can install a custom recovery using fastboot (google it) and then install a ROM through it
INSTALL TWRP AND ROOT LENOVO P1M
Check this first.
a) Take backup of your important data at safe place.
b) Device must adequately charged.
c) Install USB drivers (MTK USB ALL + MTK VCOM DRIVER) to your PC. (For Windows) (Extract the driver zip and read the ReadMe.txt to install Usb Drivers)
Install TWRP
Follow the steps below.
Note : Use only TWRP 3 if your device is New Version or else your device will face some problem.
1) Download Sp Flash Tool and TWRP3 then Extract the Flash Tool & TWRP. – Then open " flash_tool.exe ".
2) Select " MT6735M_Android_scatter.txt ". It will locate in TWRP 3 folder.
3) Click Options on the top left side of the Flash Tool then check Download and make sure both of them are checked.
4) Select the " Download Only " to flash recovery.
5) Now just click on checkbox recovery and browse to the extracted files and locate " recovery.img ".
6) Turn off your Lenovo Vibe P1m
7) Click the big Download button on top right and connect the phone with usb cable in switch off condition.
8) Now you will see the red stripe showing download percentage.
9) Your phone is successfully installed TWRP now.
Steps to enter Recovery mode in Lenovo VIBE P1m :
1) Press and hold the Volume Down Button + Power Button.
2) When you see the Boot Screen, Release the Buttons.
3) Select Recovery mode using Volume Down.
4) Press Volume Up to Enter Recovery mode.
Note : When you flash recovery, do not switch on the device directly or else the recovery will replace by stock recovery.
Now TWRP recovery is installed on your Lenovo Vibe P1m.
Root Lenovo Vibe P1M
After installing TWRP on Lenovo Vibe P1M, follow the given steps to root it.
1) Download SuperSU from here.
2) Place the downloaded SuperSu zip in your external SD card.
3) Boot into Recovery Mode.
4) Click the Install menu on TWRP.
5) Browse the SuperSu zip you've downloaded and install it.
6) After SuperSu zip is successfully installed, Reboot your device.
7) Your Device is Rooted now.
Warning: I am not responsible if anything goes wrong, bricked device.
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
subhyendu said:
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
Click to expand...
Click to collapse
Sorry for the late reply... i hope you've fixed it now..
Vlk Is My Name said:
Sorry for the late reply... i hope you've fixed it now..
Click to expand...
Click to collapse
Yes bro...i try another version of twrp & its work for me
subhyendu said:
Yes bro...i try another version of twrp & its work for me
Click to expand...
Click to collapse
Twrp 3.1.0 is now available...
Vlk Is My Name said:
Twrp 3.1.0 is now available...
Click to expand...
Click to collapse
How to update bro..
subhyendu said:
How to update bro..
Click to expand...
Click to collapse
Download the update and install through the previous twrp or flashify or sp flash tool or adb fastbooot, etc
subhyendu said:
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
Click to expand...
Click to collapse
Same problem here!! ?? (Not fixed yet)?
Rocker223 said:
Same problem here!! ?? (Not fixed yet)?
Click to expand...
Click to collapse
If ur phone is not rooted than first root it via kingroot...than try to flash another version of twrp via flashify..
subhyendu said:
If ur phone is not rooted than first root it via kingroot...than try to flash another version of twrp via flashify..
Click to expand...
Click to collapse
By the way, I had already rooted it!! And now somehow I got it fixed!
Bros plz help
I have downloaded above everything
But before I proceed to flash twrp3 do I need to unlock bootloader, if yes can I use sp flash tool for unlocking .Plz help
SHUBHAM 13 said:
Bros plz help
I have downloaded above everything
But before I proceed to flash twrp3 do I need to unlock bootloader, if yes can I use sp flash tool for unlocking .Plz help
Click to expand...
Click to collapse
sorry for the late reply.. no need to unlock bootloader.. you can just flash TWRP via SP Flash tool.
I can't find the usb driver for windows 10.Can any one give the link?
how to update my twrp
Please help me how to update my twrp
I am on twrp 2.8 now
I need to update it to twrp 3.1.1
Ive tried flash twrp.img trough rashr but end up bootloop
Isnthere any flashable update i can use
Since i need to update it so i can flash any nougat rom
Im on miui 9 rom now
hendra.dunk said:
Please help me how to update my twrp
I am on twrp 2.8 now
I need to update it to twrp 3.1.1
Ive tried flash twrp.img trough rashr but end up bootloop
Isnthere any flashable update i can use
Since i need to update it so i can flash any nougat rom
Im on miui 9 rom now
Click to expand...
Click to collapse
go to twrp recovery and select install option.. then select install image and flash your new twrp img file
Vickyvignesh said:
I can't find the usb driver for windows 10.Can any one give the link?
Click to expand...
Click to collapse
yeahhh... me too... :crying: that's why I dual boot with win 7
Vlk Is My Name said:
go to twrp recovery and select install option.. then select install image and flash your new twrp img file
Click to expand...
Click to collapse
Thsnk you. Its done. now i have twrp 3.1 .1 one more question why i get error 7 when i tried to flash a nougat rom.? Any solution sir?
hendra.dunk said:
Thsnk you. Its done. now i have twrp 3.1 .1 one more question why i get error 7 when i tried to flash a nougat rom.? Any solution sir?
Click to expand...
Click to collapse
that may be due to the incompatible of updater script and twrp
Success!
Successfully booting into TWRP using this method. Thanks. My firmware is S040 (year 2017).
Dude, can you reupload the TWRP3 file from google drive? It got deleted. THANKS!
Bros...help me to unbrick My HCL me connect 3G 2.0 tab...i need the stock rom?
Deadman jo said:
Bros...help me to unbrick My HCL me connect 3G 2.0 tab...i need the stock rom?
Click to expand...
Click to collapse
Here you go :
https://docs.google.com/uc?id=0B0DGQDSsarOAdG1pd1pZTjFobE0&export=download
i need HCL me connect 3G 2.0tabs Stock recovery
Deadman jo said:
i need HCL me connect 3G 2.0tabs Stock recovery
Click to expand...
Click to collapse
Stock recovery should be included in the stock rom package unless you mean custom recovery.
MigoMujahid said:
Here you go :
https://docs.google.com/uc?id=0B0DGQDSsarOAdG1pd1pZTjFobE0&export=download
Click to expand...
Click to collapse
Bro i cant flash this rom on sp flash tool
Deadman jo said:
Bro i cant flash this rom on sp flash tool
Click to expand...
Click to collapse
As far as i know, you use mp tool not sp flash tool.
http://hulkload.com/pjj60j5hx6mt
Deadman jo said:
Bro i cant flash this rom on sp flash tool
Click to expand...
Click to collapse
this rom only flash with stock recovery im lost my stock recovery..
Flash with Digma iDND7 firmware.
Deadman jo said:
this rom only flash with stock recovery im lost my stock recovery..
Click to expand...
Click to collapse
I have one but the file is locked ... since a year now
Also I tried flashing the stock rom gives this error :
Error: Invalid partition setting
17: fat 979e8000:84de8000
installation aborted
Please help or suggest
++++++++++++++++++++++++++++++++++++
Deadman jo said:
this rom only flash with stock recovery im lost my stock recovery..
Click to expand...
Click to collapse
So there is an update I was able to successfully Flash a firmware from same board which was used by HCL me connect 3G 2.0.
I searched this for 3 days and found that Digma idnd 7 tab used the same board , so I hunted for Digma firmware and luckily got them, the file link contains both ota and Flash file via MP tool.
I tried ota update but I got the same error.
So I used MP flash tool v5.1352.01
Download adb drivers of HCL me tablet.
Extract the zip, then edit the scatter file name to "MT6577_Android_scatter_emmc".
Now open SP flash tool and choose the scatter.
Click on download and then plug the tab in using the USB.
Then I got some PMT file needs to be updated error which was fixed by the next step.
Stop the download, pull the device out, then click Format options in the 2nd tab and then "Format except Bootloader".
Plug the device in.
once the format is done, plug out again, click download(make sure scatter is selected).
Plug in the device.
It will start flashing.
File links :
HCL USB drivers : androidmtkDOTcom/download-hcl-usb-driver
SP flash links : androidmtkDOTcom/smart-phone-flash-tool
Digma original firmware : Unable to post link so : use google and search supportdotdigma
ps: may be this helps digmaDOTru/catalog/item/1344
Also you will need to change the language to English after Booting up.
Click on the equalizer>> click on icon marked A[use some common sense that's what I did xD] then inside that tap on the very , top of the submenu, you will get the option to change to English.
Please let me know if if works for you. Or you need any thing.
My p9000 is currently on 20160810 and I'm unable to do the OTA update to 20170112, every time it downloads and starts to install it just stays on "rebooting" but does nothing.
On top of that I've tried to connect it up to a PC to flash it instead (was looking to try Nougart), I've managed to succesfully install the drivers but whatever PC I plug it into when powered off the PC recognises it for a few seconds and then disconnect again. So I have no device in device manager to try to play with the drivers, although as I mentioned I have already installed them sucessfully.
Should also mention I can't hard reset it with the power and voulume+ option either, as unable to enter recovery.
I've tried with Windows 7/8.1/10 all with the same result. The only difference is on the windows 7 machine it recognises it as the mtx65preloader device for a split second.
But to confuse things now more, on my windows 8.1 device the elephone is no longer recognised as a storage device, it shows as a connected device but there is no access to the drive.
The only way to go to the newer 2017 versions of the stock roms (nougat or marshmallow) is to use spflashtools. It is because elephone broke the recovery in 2016810. So when you try to update it will fail because the stock recovery is broken.
Have you disabled the driver signature in windows 10/ 8/ 7 before installing the mtk drivers? Else the installation will fail and you won't have the drivers installed at all.
I used this tutorial and it works for me on windows 10.
https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Hexyl said:
The only way to go to the newer 2017 versions of the stock roms (nougat or marshmallow) is to use spflashtools. It is because elephone broke the recovery in 2016810. So when you try to update it will fail because the stock recovery is broken.
Have you disabled the driver signature in windows 10/ 8/ 7 before installing the mtk drivers? Else the installation will fail and you won't have the drivers installed at all.
I used this tutorial and it works for me on windows 10.
https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Click to expand...
Click to collapse
Drivers were all installed fine, but the strangness continued today but for the good. On the Windows 7 machine I managed to flash the Nougart rom and now all is working great. So after days of nothing working it just suddenly decide to co-operate.
with a "broken" recovery, isn't dangerous to do any update operations? if something get corrupted how can you resolve?
Hexyl said:
The only way to go to the newer 2017 versions of the stock roms (nougat or marshmallow) is to use spflashtools. It is because elephone broke the recovery in 2016810. So when you try to update it will fail because the stock recovery is broken.
Have you disabled the driver signature in windows 10/ 8/ 7 before installing the mtk drivers? Else the installation will fail and you won't have the drivers installed at all.
I used this tutorial and it works for me on windows 10.
https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Click to expand...
Click to collapse
Fabioamd87 said:
with a "broken" recovery, isn't dangerous to do any update operations? if something get corrupted how can you resolve?
Click to expand...
Click to collapse
You simply can't do an ota update if the phone has a broken recovery. It won't install because it fails booting in the recovery. So nothing goes corrupted.
no I mean if the flash fails how you can recover without a working recovery mode?
Well mines been working without a problem for the past week, quite impressed with it.
Fabioamd87 said:
no I mean if the flash fails how you can recover without a working recovery mode?
Click to expand...
Click to collapse
Then try to Flash again. As far as I know the stock recovery can't restore backups. It is for installing ota updates and etc, I think. If you want to backup your ROM then flash a custom recovery with sp flashtools.
Can I flash again if the first flash fails? from where I do it , there is some kind of "download mode/fastboot"? Do I need to root the phone to flash a custom recovery?
thanks
Fabioamd87 said:
Can I flash again if the first flash fails? from where I do it , there is some kind of "download mode/fastboot"? Do I need to root the phone to flash a custom recovery?
thanks
Click to expand...
Click to collapse
I assume you have never installed a ROM/recovery before on your phone (with a mediatek soc). In that case, you flash your phone with a PC. You flash the phone with a program called "sp flashtools".
So the very first time you want to install a CUSTOM ROM/recovery. ---> use sp flashtools.
If you already have a custom recovery installed ----> boot the phone up in recovery (holding power button and volume +. If elephone logo appears, release power button but keep pressing volume +) and install custom ROM from there.
If you want to flash a STOCK rom ( nougat or marshmallow) -----> use sp flashtools.
You do not need a rooted phone for flashing a custom recovery.
For sp flashtools tutorials etc, look it up on XDA or just Google some spflashtool tutorials. The steps are the same for most mtk phones.
Hi everyone,i flashed remix resurrection 7.1.2 on my xperia z2 .after than ı using this rom but ı couldnt change again another rom.i reset on twrp everything useless.i flashing another rom ,process complited but everytime stuck bootloop.i used bootloopfix but not work.ı using flash tool but fail ''Error Flashing. Aborted '' every time.ı using pc companion but give error.please help me What should I do?
Hi @reflik silvan çağlar You need to download Emma here-https://developer.sonymobile.com/open-devices/flash-tool/, then flash connect device to pc, pick .575/570 (don't remember which one version shows) apply, wait to the end of flashing rom,flash twrp and your roum which you wanna to flash.
Hi @reflik silvan çağlar You need to download Emma here-https://developer.sonymobile.com/open-devices/flash-tool/, then flash connect device to pc, pick .575/570 (don't remember which one version shows) apply, wait to the end of flashing rom,flash twrp and your roum which you wanna to flash.
Use flashtool v0.9.18.6
its done
darknessmc said:
Use flashtool v0.9.18.6
Click to expand...
Click to collapse
thanks ı fix it.problem .dat file