I have a Zipatile wall controller based on Android 5.0.2
USB debugging is enabled, but when I connect it to a computer, it is not recognized, like nothing happened.
According to a post on the vendor's forum, the USB is configured to be in host mode and as such connecting to another host does not do anything.
Can some please help me to reconfigure the USB port?
ADB is accessible via network, selinux is disabled, but device is not rooted.
any help is much appreciated, thanks
So it seems I do not hit the right message as there are no takers.
Gladly will try to provide as much information as needed, but please give some pointers on what might help.
And thanks for taking the time to respond in advance
Hello Ileo,
did you succeed reconfiguring Zipatile USB port?
I am tired of Zipato platform... I think you know very well the reason since you have the same controller...
Maybe we should open a specific thread for this, I saw lot of people interested to this topic on Zipato community.
Thank you so much
Related
Hi Everyone
First of all I'd like to thank everyone who contributes to this wonderful community. It made it very easy for a complete newcomer like me to install the Modaco custom rom on my hero and I've found answers to nearly all my other queries in the forums here.
I now have a problem I can't fix though and was hoping for some advice or help.
When I plug my Hero into my computer via the USB cable Windows has now started saying "USB device not recognised" and the phone does not acknowledge the connection other than charging. The error message says "One of the USB devices attached to this computer has malfunctioned and Windows does not recognise it".
I've tried all the USB ports and other USB devices and they work fine so I think it must be related to the phone. Tried powering off the PC and phone numerous times but hasn't helped.
I'm confused as it was working fine until recently and I can't think of what I've changed.
Can anyone help or offer any suggestions?
Thanks!
Just realised I've put this in completely the wrong forum. Sorry!
Can it be moved or should I repost in the correct forum?
Cheers
Thread moved
to Q&A
hope this helps
Thanks Liamhere.
Update- tried it on my work PC with same result.
I guess it confirms it's either the wire or the phone?
IainDM said:
Hi Everyone
First of all I'd like to thank everyone who contributes to this wonderful community. It made it very easy for a complete newcomer like me to install the Modaco custom rom on my hero and I've found answers to nearly all my other queries in the forums here.
I now have a problem I can't fix though and was hoping for some advice or help.
When I plug my Hero into my computer via the USB cable Windows has now started saying "USB device not recognised" and the phone does not acknowledge the connection other than charging. The error message says "One of the USB devices attached to this computer has malfunctioned and Windows does not recognise it".
I've tried all the USB ports and other USB devices and they work fine so I think it must be related to the phone. Tried powering off the PC and phone numerous times but hasn't helped.
I'm confused as it was working fine until recently and I can't think of what I've changed.
Can anyone help or offer any suggestions?
Thanks!
Click to expand...
Click to collapse
Try to download the HTC drivers from the HTC support or Android 1.6 SDK and reinstall the USB driver again.
Thanks for your suggestions and anyone else who has been racking their brains for me.
It was, after loads of fiddling with settings and drivers etc aproblem with the USB wire.
My new one arrived in the post and now the phone syncs up fine. Phew!
Old wire is now relegated to "charging only" duties.
Hi All...
Not sure if this is ROM related, ie a bug, but I seem to have trouble connecting as MTP. I know I connected before changing to the Jelly Thunder ROM as MTP without issue. I connect my phone to the usb port and its set already to PTP and then I try to switch it to MTP and it automatically unselects itself and selects PTP again.
Things Ive tried to resolve:
I read something about having USB debugging on may affect it so I tried turning that off, but no luck.
I tried reinstalling the Samsung Drivers from their site and no change.
I also tried the Kies drivers resinstall and that didn't help.
I have tried to mess with the registry the the "upperfilters" solution found on many SG3 pages with the same problem and that didn't help (plus I don't have a "upperfilters" key, but one solution had me adding it and then removing it in some sequence of having the phone connected to computer and removed).
I tried adding my device ID to the wpdmtp.inf file as one SG3 thread suggests and that didn't help.
I am fresh out of ideas to try. One suggestion from another member in the Jelly Thunder thread, where I first posted this question, suggested trying the hidden menus mod, which I have yet to try. I feel like I shouldn't have to go to that measure to get this to work. There was also some talk on another SG3 thread about doing a factory wipe on the phone to fix it. WHAT?... that seems like a hell of an answer.... loose everything and have to start over with settings and the like.
Any help greatly appreciated...
Thanks in advance...
I'm having a strange problem I use USC OTG cable connected to the device's Foreign Sky A840s but unfortunately I do not have a signifying nothing. Who can help me fix this. Expect people to help me and I just can not get how to connect I also tried install some app on the issue but failed hope this help people thank.
Hello everyone! i have a strange problem with my Samsung s3 phone. the problem is when i connect my mobile via usb to my computer it won't detect my phone for USB storage but it charge my phone. a similar thread has been posted on this forum but solutions given there don't seem to be helpful for me. I've tried these methods to get it worked but failed.
changed USB cable and ports.
Ticked unticked USB debugging
and a member on this forum posted a code which was like *#7284# or *#7248# to change USB part of this utility from modem to PDA. but there is no USB option in this Utility it only shows UART which has these options.
Modem
PDA
Default selected option was PDA so i changed it to modem and rebooted my phone but still no luck...! Worst part of my problem is my system even won't feel there is something connected to the systemcomputer. Please Help!
Please somebody help.
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
Hey guys! I was hoping I could figure this out myself, but seeing as I haven't I resulted in asking the community for help!
I have been on here countless times resolving plenty of issues with my phone, but I cannot seem to find the right answer to my problem or problems!
So here it goes!
Okay, so, I have a galaxy S5 Active (G870A) and Windows 10. I am trying to unroot it and start fresh again since everything seems to be messing up with the phone i.e not charging when plugged into wall outlet or computer or car, not wanting to connect to computer etc.
I am currently trying to get it to connect to my computer so I can do what I need to do in order to start clean and fresh again, but for some reason I keep getting "USB device not recognized"
I have tried everything the internet as told me to do. Change usb settings in my power plan. Unplug power supply, turn off computer, plug in USB. Reinstalling drivers etc. It has just started doing this for some odd reason and I have no idea what it is and yes I have put in *#0808# to change the USB settings. I've tried updating my phone (nope), I've tried updating my windows (nope), I've reinstalled my chipset (nope)
Right now, any advice will be very helpful Thank you guys!
OH! I can try and send a debug list if that would help you guys???? Not sure! If there is any info you need please let me know!
*Bump* Thank you in advance