Hello everyone,
I have a GT-I9060I d/s, with a boot loop.
What I have done so far:
- Try to put rom stock, from sammobile (Spain), always gives Fail when installing system.img -> I tried with 3 cables and Odin versions 3.07, 3.06, 3.10, 3.12 without result
- I have put another recovery, I have made all the possible wipes and I tried to install again rom stock
- I tried to put the PIT "GRANDNEOVE3G.pit" + BL, AP, CP and CSC and nothing.
- I've tried with KIES, with emergency firmware and nothing
- I tried to put as a last resort some custom rom but nothing
I run out of ideas, someone who wants to help me?
thanks people!
sly66 said:
Hello everyone,
I have a GT-I9060I d/s, with a boot loop.
What I have done so far:
- Try to put rom stock, from sammobile (Spain), always gives Fail when installing system.img -> I tried with 3 cables and Odin versions 3.07, 3.06, 3.10, 3.12 without result
- I have put another recovery, I have made all the possible wipes and I tried to install again rom stock
- I tried to put the PIT "GRANDNEOVE3G.pit" + BL, AP, CP and CSC and nothing.
- I've tried with KIES, with emergency firmware and nothing
- I tried to put as a last resort some custom rom but nothing
I run out of ideas, someone who wants to help me?
thanks people!
Click to expand...
Click to collapse
Please add "Galaxy-grand-neo" tag in thread.
Related
hi friends,
i have an intl 16 gb sgs3. Today i flashed a custom rom and flashed some mods. after flashing rom phone was fine but after flashing mods phone stuck at "samsung galaxy s3 gt-i9300" screen-the first screen when opening the phone(the mods i have flashed are visual mods, and also hardswap mod which i was using before with no problem). i tried a cwm restore, reflashing the rom, wiping datas, reflashing stock rom with odin but no luck. searched widely in xda for bootloops and tried solutions like flashing new kernels or cf rooting again. even if i tried a pit file but my s3 is not passing that screen. only progress i recorded is when i flash siyah kernel i can see siyah kernel's boot logo but stuck there also.
is there anyone here to help me?
Reflash the rom, your mods was probably incompatible with your rom.
xSpeced said:
Reflash the rom, your mods was probably incompatible with your rom.
Click to expand...
Click to collapse
reflashed rom, and other roms and also stock rom with odin. but no luck.
Wrong PIT i guess .Flashing a PIT is a common cause of a non booting or bricked SGS3.
jje
i have progress. i managed to open s3 in 4.0.4 blj1 firmware but now it says the phone is in factory mode in a popup after i restart it. also no imei, no csc, nothing. i restored my efs backup to /efs folder nothing fixed. tried to install 4.1.2 stock again but stuck at splash screen again.
i flashed the pit file after the problem-as a solution and nothing was changed.
so now i have a gs3 without phone capabilities.
edit: my phone is not a clone, i forgot to write that.
I found the solution. I flashed android 4.0.4 old firmware for my region and after that i restored my efs. Then i flashed 4.1.2 and voila! My s3 booted. Im noting here that solution maybe it helps someone.
Thanks for all comments fellas.
Sent from my GT-I9300 using xda premium
try to wipe it at the first ,if it can't work try 2nas Android Flash Tools.
2nas.com
Provides :
1: Integrates Unbrick / Flash ROM / Root All-In-One.
2: Use the same protocol as ODIN, but 2nas is more user-friendly and easy-to-use.
3: Cloud based database to flash your android phone with correct files(ROM, etc)
4: Automatically download necessery files to flash, and check them with SHA1, it's safe for your phone.
5: Store all downloaded files in local disk, under a good directory structure, it's usefull when you have several phones.
Hello.
I tried to flash stock XEO ROM to my S3, but while the whole process it stuck on loading system.img. Then when i tried to turn on the phone it shows me the yellow triangle and info that i can recover the system with Kies. But it also didn't work. I tried to flash other stock roms but it always is stuck in booting system.img
FIX:
I downloaded different roms and different ver. of android
Tried to flash several times with pit file and without but it was still stuck at system.img
I tried different ports and the result was the same
I changed the cable and reinstalled drivers and I succeed to flash 4.0.4 ver without pit file with odin 3.07
Have you tried flashing stock rom via ODIN?
Yeah, that's what I'm talking about I tried several times and it still doesn't work :crying:
voonkz said:
Yeah, that's what I'm talking about I tried several times and it still doesn't work :crying:
Click to expand...
Click to collapse
Did you try install stock firmware with PIT file?
If you have 16 GB version of GT-I9300, you can try this PIT file (I tested on my device).
Odin 3.07 with PIT file;
http://forum.xda-developers.com/attachment.php?attachmentid=2762337&d=1401023420
Download a stock ROM from sammobile, then put it to PDA. Before start flashing, press PIT button on Odin and select the PIT file, then press Start.
I decided to send my phone to service, when will it come back still bricked I will try it
Ok, I will get my phone back UNFIXED because they told me at the service that i have to pay for changing the firmware because my phone comes from other country.. I disagreed and told them to send my phone back.
I had an idea how to fix my phone and also some questions about that.
First, is there any way to full wipe my phone without recovery, I mean that i can;t access recovery on my bricked phone and i think that causes the problem with flashing any rom with odin (that the brokem rom i still installed and odin can' flash the new one over it). When I'll wipe the phone completely i suppose it might solve the problem. But does wiping the phone makes the phone unrecognizable for PC?
The second idea is kinda connected with the first one. I thought about flashing cf root with odin into my phone and as far as i know, it has its own recovery so i can easily wipe the phone with it and then flash the stock rom.
I know that my reply looks kinda messy but I hope you know what i mean.
First, is there any way to full wipe my phone without recovery, I mean that i can;t access recovery on my bricked phone and i think that causes the problem with flashing any rom with odin (that the brokem rom i still installed and odin can' flash the new one over it). When I'll wipe the phone completely i suppose it might solve the problem. But does wiping the phone makes the phone unrecognizable for PC?
Click to expand...
Click to collapse
Bump, need an answer to this.
up
Ok my phone is finally alive :cyclops: Here's the solution i figured out:
I downloaded different roms and different ver. of android
Tried to flash several times with pit file and without but it was still stuck at system.img
I tried different ports and the result was the same
I changed the cable and reinstalled drivers and I succeed to flash 4.0.4 ver without pit file with odin 3.07
I will add it to the first post for those who have the same problem, cheers :good:
hello
i have a galaxy s2 phone with 2.3 firmware
i wanted to upgrade it to ics of jeallybean, so i've downloaded a flashable zip rom and tried to flash from stock recovery, but it didn't flash, so i tried to falsh a new recovery, i tried: rom manager (after rooting the device but it ddoesnt work.
so i tried to flash a frimware via odin
i used Odin 1.85
and this firmware: GT-I9100_ITV_I9100XWLPF_I9100OXILP6_I9100XXLPX.tar.md5
but the oding stucks in:
boot.ini
NAND write start
and then it stopes
i've also tried this firmwre:
I9100XWLSW_I9100XXMS3_I9100VGFLS2_HOME.tar.md5
and i have the same problem
my phone now is stucked in download mode, and i cannot enter recovery mode, not connect with samsung Kies.
please help me.
ARDV said:
hello
i have a galaxy s2 phone with 2.3 firmware
i wanted to upgrade it to ics of jeallybean, so i've downloaded a flashable zip rom and tried to flash from stock recovery, but it didn't flash, so i tried to falsh a new recovery, i tried: rom manager (after rooting the device but it ddoesnt work.
so i tried to flash a frimware via odin
i used Odin 1.85
and this firmware: GT-I9100_ITV_I9100XWLPF_I9100OXILP6_I9100XXLPX.tar.md5
but the oding stucks in:
boot.ini
NAND write start
and then it stopes
i've also tried this firmwre:
I9100XWLSW_I9100XXMS3_I9100VGFLS2_HOME.tar.md5
and i have the same problem
my phone now is stucked in download mode, and i cannot enter recovery mode, not connect with samsung Kies.
please help me.
Click to expand...
Click to collapse
Follow the steps I've mentioned in this forum yesterday.
http://forum.xda-developers.com/galaxy-s2/help/fix-samsung-s2-booting-root-reset-t3087729
This should fix the issue, and then you can restore back and update your phone or flash custom ROMs.
Regards
i'm trying to download from rapidgator from 2 days but i can't, it always breaks!
and it can't be resumed
http://samsung-updates.com/details/23417/Galaxy_S_2/GT-I9100/VOD/I9100XWMS2.html
I have a stucked i9100 too.
If i choose a pit file, and select Re-partition, Odin stucked in SetPartition.
if i not checked, the re-partition, Odin stucked in data.img (3 files) or sbl.bin (1 file)
the same problem
always stuck in: NAND write start!!
help please
note:
when i falsh a recovery (like:CWM-KitKatCompatible-i9100.tar) it flashed well, but i can't access the recovery!
phone ssn: i9100GSMH
is it necessary to flash any pit file?
pit file should not be necessary, its main purpose is to re-partitionate the device. If you are already happy with your setup you don't need to flash it to update firmware.
Remember to choose the firmware for the right region for you, the link you posted is for VOD Region (United Kingdom Vodafone).
i think the problem is in the region, i've tried many regions but no one worked.
how to know my phone original firmware region?
Edit: phone flashed sccuessfully.
the problem was that the version printed in the phone is I9100, and the real phone's firmware is I9108.
Hi , please help me ,
I have a samsung galaxy s3 , it was working so good , until yesterday , when i wake up , i found it crushed on the "samsung galaxy s||| "logo , i try to flash it , but i always get failed on odin .
I have access to recovery mode but it write : E: failed to mount /cache
I have access to download mode too without any probleme
*i''ve tried many version of odin : 1.83 - 1.85 - 3.04 - 3.06 - 3.07 - 3.09 - 3.12 .
*i've tried pit file (but im not sure if it's compatible with my phone ) anyway i get failed error too .
*i've tried changing the cable .
*i've tried changin usb port .
*i've changed the pc (first one is with windows 10 - and the second is with windows 7)
Please help me :'(
Thanks in advance
What error message are you getting in the Odin log?
Sounds like it is a hardware problem.
with frimware I9300XXUGMK6_I9300OXXGML1_I9300XXUGMK6 ; i got error on boot.img in all odin version
and in frimware I9300XXDLIH_I9300VDSDLI1_VDS ; i got error on system.img in all odin version
Looks like the rom is too old for the phone. Try flashing the latest stock ROM from sammobile.com.
audit13 said:
Looks like the rom is too old for the phone. Try flashing the latest stock ROM from sammobile.com.
Click to expand...
Click to collapse
Depends where it's from. For my btu, mk6 was the last update. Nothing changed after mk6 so you should be able to 'downgrade' from any higher version as they are all 4.3.
E: failed to mount is a recovery issue. Which recovery are you using?. Is your device rooted?.
If your device isn't rooted then you can try flashing the stock recovery image via odin on the pc (hopefully it'll flash provided that the corruption is elsewhere in the nand).
If the stock recovery image won't flash then you have bigger issues and the device is probably hard bricked from hardware failure.
Here is a stock recovery for mk6: https://drive.google.com/file/d/0B4vTiHTBB629ajRJaWx5QlVFSWs/view?usp=drivesdk
Grab it quick before a mod breaks my balls for it.
Beamed in by telepathy.
Although mk6 may be the latest for some phones, it may not be the latest for the op's phone which is why I suggested flashing the latest stock rom.
Sorry for late answer , no my phone is not rooted , how i can see which recovery im using?
audit13 said:
Although mk6 may be the latest for some phones, it may not be the latest for the op's phone which is why I suggested flashing the latest stock rom.
Click to expand...
Click to collapse
Thats why I said "depends where it's from". You're right but lack the detail..
OP: You can access recovery by holding home and vol+ while tapping the power button.
Beamed in by telepathy.
Hey everyone,
I was on stock with my S9+ and because of my slow carrier regarding updates I wanted to flash the latest BTU firmware from sammobile on it.
I downloaded everything, went into download mode and everything went well until the ODM.img file. Now it just stays like that without any error but also not going forward.
I do not know now what to do and how to get it flashed and working again? I am afraid, if I cancel the process now that I will not be able to boot again.
UPDATE:
First I was trying to do it with ODIN 3.13. Now I decided to try with ODIN 3.12 and after clicking on flash it just flashed the moden within a few seconds and rebooted the phone saying it was successful. At first it was strange because it did not flashed the system and took only 2 seconds, but the phone booted fine, with the data still there but on the newest firmware.
So, seems like the issue was in the lates version od ODIN, like always.
I'm having the same issue. Trying to flash unbranded XEO firmware on branded S9+. Everything goes fine till ODM.IMG. Older ODIN isn't flashing anything, phone just reboots.
aragoth said:
I'm having the same issue. Trying to flash unbranded XEO firmware on branded S9+. Everything goes fine till ODM.IMG. Older ODIN isn't flashing anything, phone just reboots.
Click to expand...
Click to collapse
Try patched Odin from here - https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
I always had problems with both versions of Odins on my u965u1, but patched Odin made wonders.
sdame problem
HI. i ha ve same problem odm.img stopped the flasshingm, i dont understand why. patched odin not solved. G965F
arnes_king said:
Hey everyone,
I was on stock with my S9+ and because of my slow carrier regarding updates I wanted to flash the latest BTU firmware from sammobile on it.
I downloaded everything, went into download mode and everything went well until the ODM.img file. Now it just stays like that without any error but also not going forward.
I do not know now what to do and how to get it flashed and working again? I am afraid, if I cancel the process now that I will not be able to boot again.
Click to expand...
Click to collapse
I tried this as well and also got stuck at the ODM file.
It's quite safe to hold down Bixby+Volume down+Power when it gets stuck and just repeat the Odin process.
I concluded that you can't use the Home CSC file when changing firmware from any other to BTU (or any other different operator version). The only way to do it was to allow a complete wipe of the phone by using the CSC file not the HOME version. After that everything went OK.
As a tip, if you are currently stuck at odm.img then restart the phone in download mode (Bixby+Volume down+Power) and as a temporary fix to get your phone back, use Odin 3.12 and flash all the files AP, BL, CP and Home CSC. It will go through very quickly, it won't change your CSC nor will it wipe any data. Then use Smart Switch to make a backup, then repeat Odin with all the files but use the non-Home CSC file which will wipe the phone, and when complete restore via Smart Switch.
just flash with .pit file and see the magic